failed attributes
| status |
attribute |
duration |
| failed eval |
checks.aarch64-darwin.all-packages
|
— |
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = …
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = derivationStrict drvAttrs;
| ^
38|
… while evaluating derivation 'all-packages'
whose name attribute is located at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:647:11
… while evaluating attribute 'buildCommand' of derivation 'all-packages'
at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/build-support/trivial-builders/default.nix:81:17:
80| enableParallelBuilding = true;
81| inherit buildCommand name;
| ^
82| passAsFile = [ "buildCommand" ] ++ (derivationArgs.passAsFile or [ ]);
(stack trace truncated; use '--show-trace' to show the full, detailed trace)
error: Refusing to evaluate package 'pnpm-10.34.0' in /nix/store/8wi1z96ma74aj33wyv0hggsq8jn0rlpm-source/pkgs/development/tools/pnpm/generic.nix:170 because it is marked as insecure
Known issues:
- CVE-2026-55487
- CVE-2026-55698
- CVE-2026-55180
- CVE-2026-55697
- CVE-2026-59194
- CVE-2026-59195
- CVE-2026-59196
- CVE-2026-82392
- CVE-2026-82393
You can install it anyway by allowing this package, using the
following methods:
a) To temporarily allow all insecure packages, you can use an environment
variable for a single invocation of the nix tools:
$ export NIXPKGS_ALLOW_INSECURE=1
Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
then pass `--impure` in order to allow use of environment variables.
b) for `nixos-rebuild` you can add ‘pnpm-10.34.0’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘pnpm-10.34.0’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
|
| failed eval |
checks.aarch64-darwin.devShell-clan-site
|
— |
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = …
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = derivationStrict drvAttrs;
| ^
38|
… while evaluating derivation 'nix-shell'
whose name attribute is located at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:647:11
… while evaluating attribute '__impureHostDeps' of derivation 'nix-shell'
at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:816:11:
815| unique (computedPropagatedSandboxProfile ++ [ propagatedSandboxProfile ]);
816| ${if buildIsDarwin then "__impureHostDeps" else null} =
| ^
817| let
(stack trace truncated; use '--show-trace' to show the full, detailed trace)
error: Refusing to evaluate package 'pnpm-10.34.0' in /nix/store/8wi1z96ma74aj33wyv0hggsq8jn0rlpm-source/pkgs/development/tools/pnpm/generic.nix:170 because it is marked as insecure
Known issues:
- CVE-2026-55487
- CVE-2026-55698
- CVE-2026-55180
- CVE-2026-55697
- CVE-2026-59194
- CVE-2026-59195
- CVE-2026-59196
- CVE-2026-82392
- CVE-2026-82393
You can install it anyway by allowing this package, using the
following methods:
a) To temporarily allow all insecure packages, you can use an environment
variable for a single invocation of the nix tools:
$ export NIXPKGS_ALLOW_INSECURE=1
Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
then pass `--impure` in order to allow use of environment variables.
b) for `nixos-rebuild` you can add ‘pnpm-10.34.0’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘pnpm-10.34.0’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
|
| failed eval |
checks.aarch64-linux.all-packages
|
— |
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = …
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = derivationStrict drvAttrs;
| ^
38|
… while evaluating derivation 'all-packages'
whose name attribute is located at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:647:11
… while evaluating attribute 'buildCommand' of derivation 'all-packages'
at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/build-support/trivial-builders/default.nix:81:17:
80| enableParallelBuilding = true;
81| inherit buildCommand name;
| ^
82| passAsFile = [ "buildCommand" ] ++ (derivationArgs.passAsFile or [ ]);
(stack trace truncated; use '--show-trace' to show the full, detailed trace)
error: Refusing to evaluate package 'pnpm-10.34.0' in /nix/store/8wi1z96ma74aj33wyv0hggsq8jn0rlpm-source/pkgs/development/tools/pnpm/generic.nix:170 because it is marked as insecure
Known issues:
- CVE-2026-55487
- CVE-2026-55698
- CVE-2026-55180
- CVE-2026-55697
- CVE-2026-59194
- CVE-2026-59195
- CVE-2026-59196
- CVE-2026-82392
- CVE-2026-82393
You can install it anyway by allowing this package, using the
following methods:
a) To temporarily allow all insecure packages, you can use an environment
variable for a single invocation of the nix tools:
$ export NIXPKGS_ALLOW_INSECURE=1
Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
then pass `--impure` in order to allow use of environment variables.
b) for `nixos-rebuild` you can add ‘pnpm-10.34.0’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘pnpm-10.34.0’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
|
| failed eval |
checks.aarch64-linux.clan-site-lint
|
— |
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = …
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = derivationStrict drvAttrs;
| ^
38|
… while evaluating derivation 'clan-site-lint'
whose name attribute is located at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:647:11
… while evaluating attribute 'nativeBuildInputs' of derivation 'clan-site-lint'
at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:715:11:
714| depsBuildBuild = buildBuildOutputs;
715| nativeBuildInputs = buildHostOutputs;
| ^
716| depsBuildTarget = buildTargetOutputs;
(stack trace truncated; use '--show-trace' to show the full, detailed trace)
error: Refusing to evaluate package 'pnpm-10.34.0' in /nix/store/8wi1z96ma74aj33wyv0hggsq8jn0rlpm-source/pkgs/development/tools/pnpm/generic.nix:170 because it is marked as insecure
Known issues:
- CVE-2026-55487
- CVE-2026-55698
- CVE-2026-55180
- CVE-2026-55697
- CVE-2026-59194
- CVE-2026-59195
- CVE-2026-59196
- CVE-2026-82392
- CVE-2026-82393
You can install it anyway by allowing this package, using the
following methods:
a) To temporarily allow all insecure packages, you can use an environment
variable for a single invocation of the nix tools:
$ export NIXPKGS_ALLOW_INSECURE=1
Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
then pass `--impure` in order to allow use of environment variables.
b) for `nixos-rebuild` you can add ‘pnpm-10.34.0’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘pnpm-10.34.0’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
|
| failed eval |
checks.aarch64-linux.devShell-clan-site
|
— |
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = …
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = derivationStrict drvAttrs;
| ^
38|
… while evaluating derivation 'nix-shell'
whose name attribute is located at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:647:11
… while evaluating attribute 'nativeBuildInputs' of derivation 'nix-shell'
at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:715:11:
714| depsBuildBuild = buildBuildOutputs;
715| nativeBuildInputs = buildHostOutputs;
| ^
716| depsBuildTarget = buildTargetOutputs;
(stack trace truncated; use '--show-trace' to show the full, detailed trace)
error: Refusing to evaluate package 'pnpm-10.34.0' in /nix/store/8wi1z96ma74aj33wyv0hggsq8jn0rlpm-source/pkgs/development/tools/pnpm/generic.nix:170 because it is marked as insecure
Known issues:
- CVE-2026-55487
- CVE-2026-55698
- CVE-2026-55180
- CVE-2026-55697
- CVE-2026-59194
- CVE-2026-59195
- CVE-2026-59196
- CVE-2026-82392
- CVE-2026-82393
You can install it anyway by allowing this package, using the
following methods:
a) To temporarily allow all insecure packages, you can use an environment
variable for a single invocation of the nix tools:
$ export NIXPKGS_ALLOW_INSECURE=1
Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
then pass `--impure` in order to allow use of environment variables.
b) for `nixos-rebuild` you can add ‘pnpm-10.34.0’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘pnpm-10.34.0’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
|
| failed eval |
checks.aarch64-linux.devShell-docs
|
— |
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = …
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = derivationStrict drvAttrs;
| ^
38|
… while evaluating derivation 'nix-shell'
whose name attribute is located at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:647:11
… while evaluating attribute 'nativeBuildInputs' of derivation 'nix-shell'
at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:715:11:
714| depsBuildBuild = buildBuildOutputs;
715| nativeBuildInputs = buildHostOutputs;
| ^
716| depsBuildTarget = buildTargetOutputs;
(stack trace truncated; use '--show-trace' to show the full, detailed trace)
error: Refusing to evaluate package 'pnpm-10.34.0' in /nix/store/8wi1z96ma74aj33wyv0hggsq8jn0rlpm-source/pkgs/development/tools/pnpm/generic.nix:170 because it is marked as insecure
Known issues:
- CVE-2026-55487
- CVE-2026-55698
- CVE-2026-55180
- CVE-2026-55697
- CVE-2026-59194
- CVE-2026-59195
- CVE-2026-59196
- CVE-2026-82392
- CVE-2026-82393
You can install it anyway by allowing this package, using the
following methods:
a) To temporarily allow all insecure packages, you can use an environment
variable for a single invocation of the nix tools:
$ export NIXPKGS_ALLOW_INSECURE=1
Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
then pass `--impure` in order to allow use of environment variables.
b) for `nixos-rebuild` you can add ‘pnpm-10.34.0’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘pnpm-10.34.0’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
|
| failed eval |
checks.x86_64-linux.all-packages
|
— |
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = …
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = derivationStrict drvAttrs;
| ^
38|
… while evaluating derivation 'all-packages'
whose name attribute is located at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:647:11
… while evaluating attribute 'buildCommand' of derivation 'all-packages'
at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/build-support/trivial-builders/default.nix:81:17:
80| enableParallelBuilding = true;
81| inherit buildCommand name;
| ^
82| passAsFile = [ "buildCommand" ] ++ (derivationArgs.passAsFile or [ ]);
(stack trace truncated; use '--show-trace' to show the full, detailed trace)
error: Refusing to evaluate package 'pnpm-10.34.0' in /nix/store/8wi1z96ma74aj33wyv0hggsq8jn0rlpm-source/pkgs/development/tools/pnpm/generic.nix:170 because it is marked as insecure
Known issues:
- CVE-2026-55487
- CVE-2026-55698
- CVE-2026-55180
- CVE-2026-55697
- CVE-2026-59194
- CVE-2026-59195
- CVE-2026-59196
- CVE-2026-82392
- CVE-2026-82393
You can install it anyway by allowing this package, using the
following methods:
a) To temporarily allow all insecure packages, you can use an environment
variable for a single invocation of the nix tools:
$ export NIXPKGS_ALLOW_INSECURE=1
Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
then pass `--impure` in order to allow use of environment variables.
b) for `nixos-rebuild` you can add ‘pnpm-10.34.0’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘pnpm-10.34.0’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
|
| failed eval |
checks.x86_64-linux.clan-site-lint
|
— |
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = …
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = derivationStrict drvAttrs;
| ^
38|
… while evaluating derivation 'clan-site-lint'
whose name attribute is located at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:647:11
… while evaluating attribute 'nativeBuildInputs' of derivation 'clan-site-lint'
at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:715:11:
714| depsBuildBuild = buildBuildOutputs;
715| nativeBuildInputs = buildHostOutputs;
| ^
716| depsBuildTarget = buildTargetOutputs;
(stack trace truncated; use '--show-trace' to show the full, detailed trace)
error: Refusing to evaluate package 'pnpm-10.34.0' in /nix/store/8wi1z96ma74aj33wyv0hggsq8jn0rlpm-source/pkgs/development/tools/pnpm/generic.nix:170 because it is marked as insecure
Known issues:
- CVE-2026-55487
- CVE-2026-55698
- CVE-2026-55180
- CVE-2026-55697
- CVE-2026-59194
- CVE-2026-59195
- CVE-2026-59196
- CVE-2026-82392
- CVE-2026-82393
You can install it anyway by allowing this package, using the
following methods:
a) To temporarily allow all insecure packages, you can use an environment
variable for a single invocation of the nix tools:
$ export NIXPKGS_ALLOW_INSECURE=1
Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
then pass `--impure` in order to allow use of environment variables.
b) for `nixos-rebuild` you can add ‘pnpm-10.34.0’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘pnpm-10.34.0’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
|
| failed eval |
checks.x86_64-linux.devShell-clan-site
|
— |
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = …
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = derivationStrict drvAttrs;
| ^
38|
… while evaluating derivation 'nix-shell'
whose name attribute is located at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:647:11
… while evaluating attribute 'nativeBuildInputs' of derivation 'nix-shell'
at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:715:11:
714| depsBuildBuild = buildBuildOutputs;
715| nativeBuildInputs = buildHostOutputs;
| ^
716| depsBuildTarget = buildTargetOutputs;
(stack trace truncated; use '--show-trace' to show the full, detailed trace)
error: Refusing to evaluate package 'pnpm-10.34.0' in /nix/store/8wi1z96ma74aj33wyv0hggsq8jn0rlpm-source/pkgs/development/tools/pnpm/generic.nix:170 because it is marked as insecure
Known issues:
- CVE-2026-55487
- CVE-2026-55698
- CVE-2026-55180
- CVE-2026-55697
- CVE-2026-59194
- CVE-2026-59195
- CVE-2026-59196
- CVE-2026-82392
- CVE-2026-82393
You can install it anyway by allowing this package, using the
following methods:
a) To temporarily allow all insecure packages, you can use an environment
variable for a single invocation of the nix tools:
$ export NIXPKGS_ALLOW_INSECURE=1
Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
then pass `--impure` in order to allow use of environment variables.
b) for `nixos-rebuild` you can add ‘pnpm-10.34.0’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘pnpm-10.34.0’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
|
| failed eval |
checks.x86_64-linux.devShell-docs
|
— |
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = …
error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = derivationStrict drvAttrs;
| ^
38|
… while evaluating derivation 'nix-shell'
whose name attribute is located at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:647:11
… while evaluating attribute 'nativeBuildInputs' of derivation 'nix-shell'
at «https://releases.nixos.org/nixos/26.05/nixos-26.05.11829.a033e66ab94a/nixexprs.tar.xz?narHash=sha256-MdqpFMXQX2Vz1KgQ516wgEo4eiFzm3rEMyE3Qh4wyLA%3D»/pkgs/stdenv/generic/make-derivation.nix:715:11:
714| depsBuildBuild = buildBuildOutputs;
715| nativeBuildInputs = buildHostOutputs;
| ^
716| depsBuildTarget = buildTargetOutputs;
(stack trace truncated; use '--show-trace' to show the full, detailed trace)
error: Refusing to evaluate package 'pnpm-10.34.0' in /nix/store/8wi1z96ma74aj33wyv0hggsq8jn0rlpm-source/pkgs/development/tools/pnpm/generic.nix:170 because it is marked as insecure
Known issues:
- CVE-2026-55487
- CVE-2026-55698
- CVE-2026-55180
- CVE-2026-55697
- CVE-2026-59194
- CVE-2026-59195
- CVE-2026-59196
- CVE-2026-82392
- CVE-2026-82393
You can install it anyway by allowing this package, using the
following methods:
a) To temporarily allow all insecure packages, you can use an environment
variable for a single invocation of the nix tools:
$ export NIXPKGS_ALLOW_INSECURE=1
Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
then pass `--impure` in order to allow use of environment variables.
b) for `nixos-rebuild` you can add ‘pnpm-10.34.0’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘pnpm-10.34.0’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"pnpm-10.34.0"
];
}
|
| failed |
checks.x86_64-linux.wifi
|
10s |
vm-test-run-wifi:
second # qemu-system-x86_64: terminating on signal 15 from pid 6 (/nix/store/jy00n3jp5xj8s40n1fbldmkcr5n7avxc-python3-3.13.15/bin/python3.13)
…
vm-test-run-wifi:
second # qemu-system-x86_64: terminating on signal 15 from pid 6 (/nix/store/jy00n3jp5xj8s40n1fbldmkcr5n7avxc-python3-3.13.15/bin/python3.13)
test # [ 8.531829] systemd-logind[618]: Watching system buttons on /dev/input/event2 (Power Button)
test # [ 8.584159] systemd[1]: linger-users.service: Deactivated successfully.
test # [ 8.589294] systemd[1]: Finished linger-users.service.
test # [ 8.596831] systemd[1]: Finished Permit User Sessions.
kill QemuMachine (pid 15)
test # qemu-system-x86_64: terminating on signal 15 from pid 6 (/nix/store/jy00n3jp5xj8s40n1fbldmkcr5n7avxc-python3-3.13.15/bin/python3.13)
(finished: cleanup, in 0.16 seconds)
|