don't know how to build these paths:
  /nix/store/bn0kvqksy9fx13i91ma4ms3knydn24i0-vm-test-run-update-hardware-configuration.drv
warning: ignoring the client-specified setting 'store', because it is a restricted setting and you are not a trusted user
building '/nix/store/mycvdrn0vskvhfnhs6yi6fy8h1dlvkkn-test-script.drv' on nix-store.geninf.io:50051
test-script> gi-build-x86-02: building mycvdrn0vskvhfnhs6yi6fy8h1dlvkkn-test-script.drv
test-script> structuredAttrs is enabled
building '/nix/store/6zyhlmbfpdzmrbnba6fjl2f6i0x2096k-driverConfiguration.json.drv' on nix-store.geninf.io:50051
driverConfiguration.json> gi-build-x86-02: building 6zyhlmbfpdzmrbnba6fjl2f6i0x2096k-driverConfiguration.json.drv
driverConfiguration.json> structuredAttrs is enabled
building '/nix/store/hg1ay0cp5lgf0dag2nksg3ga08agkgbc-nixos-test-driver-update-hardware-configuration.drv' on nix-store.geninf.io:50051
nixos-test-driver-update-hardware-configuration> gi-build-x86-02: building hg1ay0cp5lgf0dag2nksg3ga08agkgbc-nixos-test-driver-update-hardware-configuration.drv
nixos-test-driver-update-hardware-configuration> Running type check (enable/disable: config.skipTypeCheck)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck
nixos-test-driver-update-hardware-configuration> All checks passed!
nixos-test-driver-update-hardware-configuration> Linting test script (enable/disable: config.skipLint)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint
nixos-test-driver-update-hardware-configuration> All checks passed!
building '/nix/store/bn0kvqksy9fx13i91ma4ms3knydn24i0-vm-test-run-update-hardware-configuration.drv' on nix-store.geninf.io:50051
vm-test-run-update-hardware-configuration> gi-build-x86-02: building bn0kvqksy9fx13i91ma4ms3knydn24i0-vm-test-run-update-hardware-configuration.drv
vm-test-run-update-hardware-configuration> Machine state will be reset. To keep it, pass --keep-machine-state
vm-test-run-update-hardware-configuration> start all VLans
vm-test-run-update-hardware-configuration> (finished: start all VLans, in 0.00 seconds)
vm-test-run-update-hardware-configuration> Test will time out and terminate in 3600.0 seconds
vm-test-run-update-hardware-configuration> run the VM test script
vm-test-run-update-hardware-configuration> additionally exposed symbols:
vm-test-run-update-hardware-configuration>     target,
vm-test-run-update-hardware-configuration>     vlan1,
vm-test-run-update-hardware-configuration>     start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh
vm-test-run-update-hardware-configuration> target: starting vm
vm-test-run-update-hardware-configuration> target # Disk image does not exist, creating the virtualisation disk image...
vm-test-run-update-hardware-configuration> target: QEMU running (pid 45)
vm-test-run-update-hardware-configuration> target # Formatting '/build/vm-state-target/tmp.bqtvAh3eY1', fmt=raw size=8589934592
vm-test-run-update-hardware-configuration> target # mke2fs 1.47.4 (6-Mar-2025)
vm-test-run-update-hardware-configuration> target # Discarding device blocks:       0/2097152               done
vm-test-run-update-hardware-configuration> target # Creating filesystem with 2097152 4k blocks and 524288 inodes
vm-test-run-update-hardware-configuration> target # Filesystem UUID: ea7f496a-4078-4377-99a7-f7bf5148c0a4
vm-test-run-update-hardware-configuration> target # Superblock backups stored on blocks:
vm-test-run-update-hardware-configuration> target # 	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Allocating group tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Writing inode tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Creating journal (16384 blocks): done
vm-test-run-update-hardware-configuration> target # Writing superblocks and filesystem accounting information:  0/64     done
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Virtualisation disk image created.
vm-test-run-update-hardware-configuration> target # Formatting 'empty0.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=536870912 lazy_refcounts=off refcount_bits=16
vm-test-run-update-hardware-configuration> target # Starting virtiofs daemons...
vm-test-run-update-hardware-configuration> target # [2026-10-16T09:31:45Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-16T09:31:45Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-16T09:31:45Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-16T09:31:45Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-16T09:31:45Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-16T09:31:45Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-16T09:31:45Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-16T09:31:45Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-16T09:31:45Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-16T09:31:45Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-10-16T09:31:45Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-10-16T09:31:45Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC550+7EF2C550 CA00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:02.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:06.0 CB00 PCI2.10 PnP PMM 7EFCC550 7EF2C550 CB00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:06.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Booting from ROM...
vm-test-run-update-hardware-configuration> target # Probing EDD (edd=off to disable)... o[    0.000000] Linux version 6.18.56 (nixbld@localhost) (gcc (GCC) 16.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC @1791725172
vm-test-run-update-hardware-configuration> target # [    0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/4knrinnlra2bn3vs9475y93vwsdzlkg3-nixos-system-target-test/init regInfo=/nix/.ro-store/c9v7ggk8ys9pdllgpcrc1zlzbnnzbdah-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-provided physical RAM map:
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd4fff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000007ffd5000-0x000000007fffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013e7fffff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] NX (Execute Disable) protection: active
vm-test-run-update-hardware-configuration> target # [    0.000000] APIC: Static calls initialized
vm-test-run-update-hardware-configuration> target # [    0.000000] SMBIOS 2.8 present.
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: Memory slots populated: 1/1
vm-test-run-update-hardware-configuration> target # [    0.000000] Hypervisor detected: KVM
vm-test-run-update-hardware-configuration> target # [    0.000000] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: using sched offset of 493242769 cycles
vm-test-run-update-hardware-configuration> target # [    0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
vm-test-run-update-hardware-configuration> target # [    0.000005] tsc: Detected 4192.076 MHz processor
vm-test-run-update-hardware-configuration> target # [    0.000577] last_pfn = 0x13e800 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000607] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
vm-test-run-update-hardware-configuration> target # [    0.000609] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
vm-test-run-update-hardware-configuration> target # [    0.000649] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.002299] found SMP MP-table at [mem 0x000f5450-0x000f545f]
vm-test-run-update-hardware-configuration> target # [    0.002313] Using GB pages for direct mapping
vm-test-run-update-hardware-configuration> target # [    0.002440] RAMDISK: [mem 0x7e2e3000-0x7ffcffff]
vm-test-run-update-hardware-configuration> target # [    0.002444] ACPI: Early table checksum verification disabled
vm-test-run-update-hardware-configuration> target # [    0.002447] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS )
vm-test-run-update-hardware-configuration> target # [    0.002450] ACPI: RSDT 0x000000007FFE2433 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002454] ACPI: FACP 0x000000007FFE222B 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002459] ACPI: DSDT 0x000000007FFE0040 0021EB (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002461] ACPI: FACS 0x000000007FFE0000 000040
vm-test-run-update-hardware-configuration> target # [    0.002462] ACPI: APIC 0x000000007FFE231F 000078 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002463] ACPI: HPET 0x000000007FFE2397 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002464] ACPI: MCFG 0x000000007FFE23CF 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002466] ACPI: WAET 0x000000007FFE240B 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002467] ACPI: Reserving FACP table memory at [mem 0x7ffe222b-0x7ffe231e]
vm-test-run-update-hardware-configuration> target # [    0.002467] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe222a]
vm-test-run-update-hardware-configuration> target # [    0.002468] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
vm-test-run-update-hardware-configuration> target # [    0.002468] ACPI: Reserving APIC table memory at [mem 0x7ffe231f-0x7ffe2396]
vm-test-run-update-hardware-configuration> target # [    0.002469] ACPI: Reserving HPET table memory at [mem 0x7ffe2397-0x7ffe23ce]
vm-test-run-update-hardware-configuration> target # [    0.002469] ACPI: Reserving MCFG table memory at [mem 0x7ffe23cf-0x7ffe240a]
vm-test-run-update-hardware-configuration> target # [    0.002469] ACPI: Reserving WAET table memory at [mem 0x7ffe240b-0x7ffe2432]
vm-test-run-update-hardware-configuration> target # [    0.002823] No NUMA configuration found
vm-test-run-update-hardware-configuration> target # [    0.002824] Faking a node at [mem 0x0000000000000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002827] NODE_DATA(0) allocated [mem 0x13e7f8780-0x13e7fdcff]
vm-test-run-update-hardware-configuration> target # [    0.002901] Zone ranges:
vm-test-run-update-hardware-configuration> target # [    0.002901]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
vm-test-run-update-hardware-configuration> target # [    0.002902]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
vm-test-run-update-hardware-configuration> target # [    0.002903]   Normal   [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002904]   Device   empty
vm-test-run-update-hardware-configuration> target # [    0.002904] Movable zone start for each node
vm-test-run-update-hardware-configuration> target # [    0.002905] Early memory node ranges
vm-test-run-update-hardware-configuration> target # [    0.002905]   node   0: [mem 0x0000000000001000-0x000000000009efff]
vm-test-run-update-hardware-configuration> target # [    0.002906]   node   0: [mem 0x0000000000100000-0x000000007ffd4fff]
vm-test-run-update-hardware-configuration> target # [    0.002907]   node   0: [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002908] Initmem setup node 0 [mem 0x0000000000001000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002923] On node 0, zone DMA: 1 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.003121] On node 0, zone DMA: 97 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.042853] On node 0, zone Normal: 43 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.043150] On node 0, zone Normal: 6144 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.044005] ACPI: PM-Timer IO Port: 0x608
vm-test-run-update-hardware-configuration> target # [    0.044019] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
vm-test-run-update-hardware-configuration> target # [    0.044045] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
vm-test-run-update-hardware-configuration> target # [    0.044047] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
vm-test-run-update-hardware-configuration> target # [    0.044048] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
vm-test-run-update-hardware-configuration> target # [    0.044049] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
vm-test-run-update-hardware-configuration> target # [    0.044050] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
vm-test-run-update-hardware-configuration> target # [    0.044050] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
vm-test-run-update-hardware-configuration> target # [    0.044053] ACPI: Using ACPI (MADT) for SMP configuration information
vm-test-run-update-hardware-configuration> target # [    0.044053] ACPI: HPET id: 0x8086a201 base: 0xfed00000
vm-test-run-update-hardware-configuration> target # [    0.044058] TSC deadline timer available
vm-test-run-update-hardware-configuration> target # [    0.044062] CPU topo: Max. logical packages:   1
vm-test-run-update-hardware-configuration> target # [    0.044063] CPU topo: Max. logical dies:       1
vm-test-run-update-hardware-configuration> target # [    0.044063] CPU topo: Max. dies per package:   1
vm-test-run-update-hardware-configuration> target # [    0.044066] CPU topo: Max. threads per core:   1
vm-test-run-update-hardware-configuration> target # [    0.044067] CPU topo: Num. cores per package:     1
vm-test-run-update-hardware-configuration> target # [    0.044067] CPU topo: Num. threads per package:   1
vm-test-run-update-hardware-configuration> target # [    0.044067] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs
vm-test-run-update-hardware-configuration> target # [    0.044090] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
vm-test-run-update-hardware-configuration> target # [    0.044114] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
vm-test-run-update-hardware-configuration> target # [    0.044115] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
vm-test-run-update-hardware-configuration> target # [    0.044116] PM: hibernation: Registered nosave memory: [mem 0x7ffd5000-0xffffffff]
vm-test-run-update-hardware-configuration> target # [    0.044117] [mem 0xc0000000-0xfed1bfff] available for PCI devices
vm-test-run-update-hardware-configuration> target # [    0.044118] Booting paravirtualized kernel on KVM
vm-test-run-update-hardware-configuration> target # [    0.044121] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
vm-test-run-update-hardware-configuration> target # [    0.047630] setup_percpu: NR_CPUS:512 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
vm-test-run-update-hardware-configuration> target # [    0.049212] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152
vm-test-run-update-hardware-configuration> target # [    0.049248] kvm-guest: PV spinlocks disabled, single CPU
vm-test-run-update-hardware-configuration> target # [    0.049250] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/4knrinnlra2bn3vs9475y93vwsdzlkg3-nixos-system-target-test/init regInfo=/nix/.ro-store/c9v7ggk8ys9pdllgpcrc1zlzbnnzbdah-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.049321] Unknown kernel command line parameters "regInfo=/nix/.ro-store/c9v7ggk8ys9pdllgpcrc1zlzbnnzbdah-closure-info/registration", will be passed to user space.
vm-test-run-update-hardware-configuration> target # [    0.049512] random: crng init done
vm-test-run-update-hardware-configuration> target # [    0.049512] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
vm-test-run-update-hardware-configuration> target # [    0.052731] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.054306] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.054333] software IO TLB: area num 1.
vm-test-run-update-hardware-configuration> target # [    0.108458] Fallback order for Node 0: 0
vm-test-run-update-hardware-configuration> target # [    0.108464] Built 1 zonelists, mobility grouping on.  Total pages: 780147
vm-test-run-update-hardware-configuration> target # [    0.108466] Policy zone: Normal
vm-test-run-update-hardware-configuration> target # [    0.110256] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
vm-test-run-update-hardware-configuration> target # [    0.115259] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
vm-test-run-update-hardware-configuration> target # [    0.120065] allocated 6291456 bytes of page_ext
vm-test-run-update-hardware-configuration> target # [    0.128728] ftrace: allocating 48842 entries in 192 pages
vm-test-run-update-hardware-configuration> target # [    0.128729] ftrace: allocated 192 pages with 2 groups
vm-test-run-update-hardware-configuration> target # [    0.129375] Dynamic Preempt: lazy
vm-test-run-update-hardware-configuration> target # [    0.129474] rcu: Preemptible hierarchical RCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.129475] rcu: 	RCU event tracing is enabled.
vm-test-run-update-hardware-configuration> target # [    0.129475] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.129476] 	Trampoline variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.129477] 	Rude variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.129477] 	Tracing variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.129478] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
vm-test-run-update-hardware-configuration> target # [    0.129478] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
vm-test-run-update-hardware-configuration> target # [    0.129518] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.129519] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.129520] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.132705] NR_IRQS: 33024, nr_irqs: 256, preallocated irqs: 16
vm-test-run-update-hardware-configuration> target # [    0.132928] rcu: srcu_init: Setting srcu_struct sizes based on contention.
vm-test-run-update-hardware-configuration> target # [    0.132935] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
vm-test-run-update-hardware-configuration> target # [    0.133085] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
vm-test-run-update-hardware-configuration> target # [    0.138309] Console: colour VGA+ 80x25
vm-test-run-update-hardware-configuration> target # [    0.138312] printk: legacy console [tty0] enabled
vm-test-run-update-hardware-configuration> target # [    0.170736] printk: legacy console [ttyS0] enabled
vm-test-run-update-hardware-configuration> target # [    0.311525] ACPI: Core revision 20250807
vm-test-run-update-hardware-configuration> target # [    0.312653] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
vm-test-run-update-hardware-configuration> target # [    0.314620] APIC: Switch to symmetric I/O mode setup
vm-test-run-update-hardware-configuration> target # [    0.315819] x2apic enabled
vm-test-run-update-hardware-configuration> target # [    0.316652] APIC: Switched APIC routing to: physical x2apic
vm-test-run-update-hardware-configuration> target # [    0.318650] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
vm-test-run-update-hardware-configuration> target # [    0.319902] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d2409b60, max_idle_ns: 440795393887 ns
vm-test-run-update-hardware-configuration> target # [    0.322025] Calibrating delay loop (skipped) preset value.. 8384.15 BogoMIPS (lpj=4192076)
vm-test-run-update-hardware-configuration> target # [    0.323111] x86/cpu: User Mode Instruction Prevention (UMIP) activated
vm-test-run-update-hardware-configuration> target # [    0.324136] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
vm-test-run-update-hardware-configuration> target # [    0.325023] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
vm-test-run-update-hardware-configuration> target # [    0.327027] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
vm-test-run-update-hardware-configuration> target # [    0.329023] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
vm-test-run-update-hardware-configuration> target # [    0.330023] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
vm-test-run-update-hardware-configuration> target # [    0.332023] Speculative Return Stack Overflow: Mitigation: Safe RET
vm-test-run-update-hardware-configuration> target # [    0.333023] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
vm-test-run-update-hardware-configuration> target # [    0.334029] Spectre V2 : Enabling IBPB for BPF
vm-test-run-update-hardware-configuration> target # [    0.335024] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
vm-test-run-update-hardware-configuration> target # [    0.336024] active return thunk: srso_alias_return_thunk
vm-test-run-update-hardware-configuration> target # [    0.337914] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
vm-test-run-update-hardware-configuration> target # [    0.339023] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
vm-test-run-update-hardware-configuration> target # [    0.340023] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
vm-test-run-update-hardware-configuration> target # [    0.341023] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
vm-test-run-update-hardware-configuration> target # [    0.342023] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
vm-test-run-update-hardware-configuration> target # [    0.343023] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
vm-test-run-update-hardware-configuration> target # [    0.344023] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
vm-test-run-update-hardware-configuration> target # [    0.346023] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
vm-test-run-update-hardware-configuration> target # [    0.347023] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
vm-test-run-update-hardware-configuration> target # [    0.348023] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
vm-test-run-update-hardware-configuration> target # [    0.350023] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
vm-test-run-update-hardware-configuration> target # [    0.351023] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
vm-test-run-update-hardware-configuration> target # [    0.352023] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
vm-test-run-update-hardware-configuration> target # [    0.353023] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
vm-test-run-update-hardware-configuration> target # [    0.355023] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16
vm-test-run-update-hardware-configuration> target # [    0.356023] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]:   24
vm-test-run-update-hardware-configuration> target # [    0.357023] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.
vm-test-run-update-hardware-configuration> target # [    0.383314] Freeing SMP alternatives memory: 48K
vm-test-run-update-hardware-configuration> target # [    0.384025] pid_max: default: 32768 minimum: 301
vm-test-run-update-hardware-configuration> target # [    0.385082] LSM: initializing lsm=capability,landlock,yama,bpf,ima
vm-test-run-update-hardware-configuration> target # [    0.386115] landlock: Up and running.
vm-test-run-update-hardware-configuration> target # [    0.387023] Yama: becoming mindful.
vm-test-run-update-hardware-configuration> target # [    0.388201] LSM support for eBPF active
vm-test-run-update-hardware-configuration> target # [    0.389127] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.390077] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.393298] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2)
vm-test-run-update-hardware-configuration> target # [    0.394438] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
vm-test-run-update-hardware-configuration> target # [    0.395031] ... version:                   2
vm-test-run-update-hardware-configuration> target # [    0.395924] ... bit width:                 48
vm-test-run-update-hardware-configuration> target # [    0.396733] ... generic counters:          6
vm-test-run-update-hardware-configuration> target # [    0.397024] ... generic bitmap:            000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.398024] ... fixed-purpose counters:    0
vm-test-run-update-hardware-configuration> target # [    0.398926] ... fixed-purpose bitmap:      0000000000000000
vm-test-run-update-hardware-configuration> target # [    0.399937] ... value mask:                0000ffffffffffff
vm-test-run-update-hardware-configuration> target # [    0.400916] ... max period:                00007fffffffffff
vm-test-run-update-hardware-configuration> target # [    0.401936] ... global_ctrl mask:          000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.403018] signal: max sigframe size: 3376
vm-test-run-update-hardware-configuration> target # [    0.403816] rcu: Hierarchical SRCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.404028] rcu: 	Max phase no-delay instances is 400.
vm-test-run-update-hardware-configuration> target # [    0.408604] smp: Bringing up secondary CPUs ...
vm-test-run-update-hardware-configuration> target # [    0.409037] smp: Brought up 1 node, 1 CPU
vm-test-run-update-hardware-configuration> target # [    0.409897] smpboot: Total of 1 processors activated (8384.15 BogoMIPS)
vm-test-run-update-hardware-configuration> target # [    0.411159] Memory: 2906360K/3120588K available (18132K kernel code, 2734K rwdata, 13652K rodata, 3660K init, 3620K bss, 201812K reserved, 0K cma-reserved)
vm-test-run-update-hardware-configuration> target # [    0.412216] devtmpfs: initialized
vm-test-run-update-hardware-configuration> target # [    0.413115] x86/mm: Memory block size: 128MB
vm-test-run-update-hardware-configuration> target # [    0.414944] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.416049] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).
vm-test-run-update-hardware-configuration> target # [    0.417086] pinctrl core: initialized pinctrl subsystem
vm-test-run-update-hardware-configuration> target # [    0.418267] PM: RTC time: 09:31:45, date: 2026-10-16
vm-test-run-update-hardware-configuration> target # [    0.421005] NET: Registered PF_NETLINK/PF_ROUTE protocol family
vm-test-run-update-hardware-configuration> target # [    0.422551] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.423056] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.424418] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.425031] audit: initializing netlink subsys (disabled)
vm-test-run-update-hardware-configuration> target # [    0.426251] thermal_sys: Registered thermal governor 'fair_share'
vm-test-run-update-hardware-configuration> target # [    0.426253] thermal_sys: Registered thermal governor 'bang_bang'
vm-test-run-update-hardware-configuration> target # [    0.427025] thermal_sys: Registered thermal governor 'step_wise'
vm-test-run-update-hardware-configuration> target # [    0.428027] audit: type=2000 audit(1792143105.862:1): state=initialized audit_enabled=0 res=1
vm-test-run-update-hardware-configuration> target # [    0.430026] thermal_sys: Registered thermal governor 'user_space'
vm-test-run-update-hardware-configuration> target # [    0.430027] thermal_sys: Registered thermal governor 'power_allocator'
vm-test-run-update-hardware-configuration> target # [    0.431040] cpuidle: using governor menu
vm-test-run-update-hardware-configuration> target # [    0.433721] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vm-test-run-update-hardware-configuration> target # [    0.434259] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.435027] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
vm-test-run-update-hardware-configuration> target # [    0.436035] PCI: Using configuration type 1 for base access
vm-test-run-update-hardware-configuration> target # [    0.437175] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
vm-test-run-update-hardware-configuration> target # [    0.442200] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.443025] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
vm-test-run-update-hardware-configuration> target # [    0.448024] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.449024] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
vm-test-run-update-hardware-configuration> target # [    0.458471] ACPI: Added _OSI(Module Device)
vm-test-run-update-hardware-configuration> target # [    0.459025] ACPI: Added _OSI(Processor Device)
vm-test-run-update-hardware-configuration> target # [    0.459958] ACPI: Added _OSI(Processor Aggregator Device)
vm-test-run-update-hardware-configuration> target # [    0.467064] ACPI: 1 ACPI AML tables successfully acquired and loaded
vm-test-run-update-hardware-configuration> target # [    0.471253] ACPI: Interpreter enabled
vm-test-run-update-hardware-configuration> target # [    0.472038] ACPI: PM: (supports S0 S3 S4 S5)
vm-test-run-update-hardware-configuration> target # [    0.472952] ACPI: Using IOAPIC for interrupt routing
vm-test-run-update-hardware-configuration> target # [    0.473893] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
vm-test-run-update-hardware-configuration> target # [    0.475024] PCI: Using E820 reservations for host bridge windows
vm-test-run-update-hardware-configuration> target # [    0.476148] ACPI: Enabled 2 GPEs in block 00 to 3F
vm-test-run-update-hardware-configuration> target # [    0.480282] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
vm-test-run-update-hardware-configuration> target # [    0.481030] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
vm-test-run-update-hardware-configuration> target # [    0.482084] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]
vm-test-run-update-hardware-configuration> target # [    0.483120] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
vm-test-run-update-hardware-configuration> target # [    0.484455] PCI host bridge to bus 0000:00
vm-test-run-update-hardware-configuration> target # [    0.485029] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.486025] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.487025] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.488025] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.489025] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.490025] pci_bus 0000:00: root bus resource [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.491026] pci_bus 0000:00: root bus resource [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.492115] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.493681] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.496111] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
vm-test-run-update-hardware-configuration> target # [    0.497047] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
vm-test-run-update-hardware-configuration> target # [    0.498081] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
vm-test-run-update-hardware-configuration> target # [    0.499287] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
vm-test-run-update-hardware-configuration> target # [    0.501007] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.503083] pci 0000:00:02.0: BAR 0 [io  0xc180-0xc19f]
vm-test-run-update-hardware-configuration> target # [    0.504035] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
vm-test-run-update-hardware-configuration> target # [    0.505063] pci 0000:00:02.0: BAR 4 [mem 0xe0000000000-0xe0000003fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.506035] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]
vm-test-run-update-hardware-configuration> target # [    0.508035] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.510046] pci 0000:00:03.0: BAR 0 [io  0xc1a0-0xc1bf]
vm-test-run-update-hardware-configuration> target # [    0.511035] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
vm-test-run-update-hardware-configuration> target # [    0.512063] pci 0000:00:03.0: BAR 4 [mem 0xe0000004000-0xe0000007fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.513918] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.516657] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
vm-test-run-update-hardware-configuration> target # [    0.517035] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
vm-test-run-update-hardware-configuration> target # [    0.518063] pci 0000:00:04.0: BAR 4 [mem 0xe0000008000-0xe000000bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.519906] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.522044] pci 0000:00:05.0: BAR 0 [io  0xc080-0xc0ff]
vm-test-run-update-hardware-configuration> target # [    0.523035] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]
vm-test-run-update-hardware-configuration> target # [    0.524080] pci 0000:00:05.0: BAR 4 [mem 0xe000000c000-0xe000000ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.525898] pci 0000:00:06.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.528044] pci 0000:00:06.0: BAR 0 [io  0xc1c0-0xc1df]
vm-test-run-update-hardware-configuration> target # [    0.529035] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]
vm-test-run-update-hardware-configuration> target # [    0.530063] pci 0000:00:06.0: BAR 4 [mem 0xe0000010000-0xe0000013fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.531035] pci 0000:00:06.0: ROM [mem 0xfeb80000-0xfebbffff pref]
vm-test-run-update-hardware-configuration> target # [    0.532917] pci 0000:00:07.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.534861] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]
vm-test-run-update-hardware-configuration> target # [    0.536024] pci 0000:00:07.0: BAR 4 [mem 0xe0000014000-0xe0000017fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.537897] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.540044] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]
vm-test-run-update-hardware-configuration> target # [    0.541069] pci 0000:00:08.0: BAR 4 [mem 0xe0000018000-0xe000001bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.542886] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.544908] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]
vm-test-run-update-hardware-configuration> target # [    0.546034] pci 0000:00:09.0: BAR 4 [mem 0xe000001c000-0xe000001ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.548895] pci 0000:00:0a.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.550971] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]
vm-test-run-update-hardware-configuration> target # [    0.552034] pci 0000:00:0a.0: BAR 4 [mem 0xe0000020000-0xe0000023fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.553896] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.556053] pci 0000:00:0b.0: BAR 0 [io  0xc100-0xc13f]
vm-test-run-update-hardware-configuration> target # [    0.557035] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]
vm-test-run-update-hardware-configuration> target # [    0.558063] pci 0000:00:0b.0: BAR 4 [mem 0xe0000024000-0xe0000027fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.559903] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.562035] pci 0000:00:0c.0: BAR 0 [io  0xc1e0-0xc1ff]
vm-test-run-update-hardware-configuration> target # [    0.563035] pci 0000:00:0c.0: BAR 1 [mem 0xfebdb000-0xfebdbfff]
vm-test-run-update-hardware-configuration> target # [    0.564063] pci 0000:00:0c.0: BAR 4 [mem 0xe0000028000-0xe000002bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.565924] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.567679] pci 0000:00:1d.0: BAR 4 [io  0xc200-0xc21f]
vm-test-run-update-hardware-configuration> target # [    0.568274] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.569659] pci 0000:00:1d.1: BAR 4 [io  0xc220-0xc23f]
vm-test-run-update-hardware-configuration> target # [    0.570318] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.571709] pci 0000:00:1d.2: BAR 4 [io  0xc240-0xc25f]
vm-test-run-update-hardware-configuration> target # [    0.572425] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.573638] pci 0000:00:1d.7: BAR 0 [mem 0xfebdc000-0xfebdcfff]
vm-test-run-update-hardware-configuration> target # [    0.574340] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.575496] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
vm-test-run-update-hardware-configuration> target # [    0.576359] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.577980] pci 0000:00:1f.2: BAR 4 [io  0xc260-0xc27f]
vm-test-run-update-hardware-configuration> target # [    0.578894] pci 0000:00:1f.2: BAR 5 [mem 0xfebdd000-0xfebddfff]
vm-test-run-update-hardware-configuration> target # [    0.580463] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.581681] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
vm-test-run-update-hardware-configuration> target # [    0.586964] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.588123] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.589145] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.590137] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.591140] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.592155] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.593142] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.594151] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.595072] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.596038] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.597038] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.598041] ACPI: PCI: Interrupt link GSID configured for IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.599039] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
vm-test-run-update-hardware-configuration> target # [    0.600037] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
vm-test-run-update-hardware-configuration> target # [    0.601042] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
vm-test-run-update-hardware-configuration> target # [    0.602038] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
vm-test-run-update-hardware-configuration> target # [    0.603856] iommu: Default domain type: Translated
vm-test-run-update-hardware-configuration> target # [    0.604828] iommu: DMA domain TLB invalidation policy: lazy mode
vm-test-run-update-hardware-configuration> target # [    0.606246] ACPI: bus type USB registered
vm-test-run-update-hardware-configuration> target # [    0.607073] usbcore: registered new interface driver usbfs
vm-test-run-update-hardware-configuration> target # [    0.608039] usbcore: registered new interface driver hub
vm-test-run-update-hardware-configuration> target # [    0.609043] usbcore: registered new device driver usb
vm-test-run-update-hardware-configuration> target # [    0.610689] NetLabel: Initializing
vm-test-run-update-hardware-configuration> target # [    0.611029] NetLabel:  domain hash size = 128
vm-test-run-update-hardware-configuration> target # [    0.611950] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
vm-test-run-update-hardware-configuration> target # [    0.612966] NetLabel:  unlabeled traffic allowed by default
vm-test-run-update-hardware-configuration> target # [    0.613953] PCI: Using ACPI for IRQ routing
vm-test-run-update-hardware-configuration> target # [    0.691164] pci 0000:00:01.0: vgaarb: setting as boot VGA device
vm-test-run-update-hardware-configuration> target # [    0.692021] pci 0000:00:01.0: vgaarb: bridge control possible
vm-test-run-update-hardware-configuration> target # [    0.692021] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vm-test-run-update-hardware-configuration> target # [    0.692027] vgaarb: loaded
vm-test-run-update-hardware-configuration> target # [    0.692828] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
vm-test-run-update-hardware-configuration> target # [    0.693830] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
vm-test-run-update-hardware-configuration> target # [    0.698097] clocksource: Switched to clocksource kvm-clock
vm-test-run-update-hardware-configuration> target # [    0.699809] VFS: Disk quotas dquot_6.6.0
vm-test-run-update-hardware-configuration> target # [    0.702103] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
vm-test-run-update-hardware-configuration> target # [    0.703699] pnp: PnP ACPI init
vm-test-run-update-hardware-configuration> target # [    0.704570] ACPI: IRQ 4 override to edge(!), high(!)
vm-test-run-update-hardware-configuration> target # [    0.705717] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
vm-test-run-update-hardware-configuration> target # [    0.707520] pnp: PnP ACPI: found 5 devices
vm-test-run-update-hardware-configuration> target # [    0.714742] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
vm-test-run-update-hardware-configuration> target # [    0.716509] clocksource: Switched to clocksource acpi_pm
vm-test-run-update-hardware-configuration> target # [    0.717676] NET: Registered PF_INET protocol family
vm-test-run-update-hardware-configuration> target # [    0.719194] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.732262] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.734140] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.735745] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.738213] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.739781] TCP: Hash tables configured (established 32768 bind 32768)
vm-test-run-update-hardware-configuration> target # [    0.741177] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.742734] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.744140] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.745720] NET: Registered PF_UNIX/PF_LOCAL protocol family
vm-test-run-update-hardware-configuration> target # [    0.746909] NET: Registered PF_XDP protocol family
vm-test-run-update-hardware-configuration> target # [    0.747957] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.749255] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.750513] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.751898] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.753311] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.754702] pci_bus 0000:00: resource 9 [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.756749] ACPI: \_SB_.GSIA: Enabled at IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.758729] ACPI: \_SB_.GSIB: Enabled at IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.760660] ACPI: \_SB_.GSIC: Enabled at IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.762517] ACPI: \_SB_.GSID: Enabled at IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.764206] PCI: CLS 0 bytes, default 64
vm-test-run-update-hardware-configuration> target # [    0.765156] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
vm-test-run-update-hardware-configuration> target # [    0.766560] Trying to unpack rootfs image as initramfs...
vm-test-run-update-hardware-configuration> target # [    0.774135] software IO TLB: mapped [mem 0x000000007a2e3000-0x000000007e2e3000] (64MB)
vm-test-run-update-hardware-configuration> target # [    0.775879] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d2409b60, max_idle_ns: 440795393887 ns
vm-test-run-update-hardware-configuration> target # [    0.810427] Initialise system trusted keyrings
vm-test-run-update-hardware-configuration> target # [    0.811565] workingset: timestamp_bits=40 max_order=20 bucket_order=0
vm-test-run-update-hardware-configuration> target # [    0.829633] Key type asymmetric registered
vm-test-run-update-hardware-configuration> target # [    0.833126] Asymmetric key parser 'x509' registered
vm-test-run-update-hardware-configuration> target # [    0.834212] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
vm-test-run-update-hardware-configuration> target # [    0.838236] io scheduler mq-deadline registered
vm-test-run-update-hardware-configuration> target # [    0.841126] io scheduler kyber registered
vm-test-run-update-hardware-configuration> target # [    0.842456] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
vm-test-run-update-hardware-configuration> target # [    0.843993] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
vm-test-run-update-hardware-configuration> target # [    0.850974] Linux agpgart interface v0.103
vm-test-run-update-hardware-configuration> target # [    0.851939] ACPI: bus type drm_connector registered
vm-test-run-update-hardware-configuration> target # [    0.854479] usbcore: registered new interface driver usbserial_generic
vm-test-run-update-hardware-configuration> target # [    0.855839] usbserial: USB Serial support registered for generic
vm-test-run-update-hardware-configuration> target # [    0.861122] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.
vm-test-run-update-hardware-configuration> target # [    0.861122] Please enable it if your BIOS has the CPPC option.
vm-test-run-update-hardware-configuration> target # [    0.863852] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
vm-test-run-update-hardware-configuration> target # [    0.868226] drop_monitor: Initializing network drop monitor service
vm-test-run-update-hardware-configuration> target # [    0.869648] NET: Registered PF_INET6 protocol family
vm-test-run-update-hardware-configuration> target # [    0.873572] Segment Routing with IPv6
vm-test-run-update-hardware-configuration> target # [    0.877128] In-situ OAM (IOAM) with IPv6
vm-test-run-update-hardware-configuration> target # [    0.878312] IPI shorthand broadcast: enabled
vm-test-run-update-hardware-configuration> target # [    0.883851] sched_clock: Marking stable (699021345, 184086713)->(973079152, -89971094)
vm-test-run-update-hardware-configuration> target # [    0.890322] registered taskstats version 1
vm-test-run-update-hardware-configuration> target # [    0.891417] Loading compiled-in X.509 certificates
vm-test-run-update-hardware-configuration> target # [    0.906542] Demotion targets for Node 0: null
vm-test-run-update-hardware-configuration> target # [    0.910157] Key type .fscrypt registered
vm-test-run-update-hardware-configuration> target # [    0.911003] Key type fscrypt-provisioning registered
vm-test-run-update-hardware-configuration> target # [    0.912185] ima: No TPM chip found, activating TPM-bypass!
vm-test-run-update-hardware-configuration> target # [    0.913332] ima: Allocated hash algorithm: sha1
vm-test-run-update-hardware-configuration> target # [    0.918179] ima: No architecture policies found
vm-test-run-update-hardware-configuration> target # [    0.919333] PM:   Magic number: 14:657:525
vm-test-run-update-hardware-configuration> target # [    0.920911] RAS: Correctable Errors collector initialized.
vm-test-run-update-hardware-configuration> target # [    0.930963] clk: Disabling unused clocks
vm-test-run-update-hardware-configuration> target # [    0.931857] PM: genpd: Disabling unused power domains
vm-test-run-update-hardware-configuration> target # [    1.035407] Freeing initrd memory: 29620K
vm-test-run-update-hardware-configuration> target # [    1.038207] Freeing unused decrypted memory: 2028K
vm-test-run-update-hardware-configuration> target # [    1.040702] Freeing unused kernel image (initmem) memory: 3660K
vm-test-run-update-hardware-configuration> target # [    1.041989] Write protecting the kernel read-only data: 32768k
vm-test-run-update-hardware-configuration> target # [    1.043458] Freeing unused kernel image (text/rodata gap) memory: 296K
vm-test-run-update-hardware-configuration> target # [    1.045114] Freeing unused kernel image (rodata/data gap) memory: 684K
vm-test-run-update-hardware-configuration> target # [    1.078010] x86/mm: Checked W+X mappings: passed, no W+X pages found.
vm-test-run-update-hardware-configuration> target # [    1.079343] Run /init as init process
vm-test-run-update-hardware-configuration> target # [    1.088313] systemd[1]: Inserted module 'autofs4'
vm-test-run-update-hardware-configuration> target # [    1.103178] fuse: init (API version 7.45)
vm-test-run-update-hardware-configuration> target # [    1.108944] ACPI: \_SB_.GSIG: Enabled at IRQ 22
vm-test-run-update-hardware-configuration> target # [    1.111547] ACPI: \_SB_.GSIH: Enabled at IRQ 23
vm-test-run-update-hardware-configuration> target # [    1.116391] ACPI: \_SB_.GSIE: Enabled at IRQ 20
vm-test-run-update-hardware-configuration> target # [    1.118643] ACPI: \_SB_.GSIF: Enabled at IRQ 21
vm-test-run-update-hardware-configuration> target # [    1.125136] virtiofs virtio6: discovered new tag: nix-store
vm-test-run-update-hardware-configuration> target # [    1.127239] virtiofs virtio6: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.135534] virtiofs virtio7: discovered new tag: shared
vm-test-run-update-hardware-configuration> target # [    1.137559] virtiofs virtio7: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.149375] virtiofs virtio8: discovered new tag: xchg
vm-test-run-update-hardware-configuration> target # [    1.151368] virtiofs virtio8: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.170584] systemd[1]: Successfully made /usr/ read-only.
vm-test-run-update-hardware-configuration> target # [    1.506723] systemd[1]: systemd 261.3 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    1.512670] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    1.513771] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    1.514860] systemd[1]: Running in initrd.
vm-test-run-update-hardware-configuration> target # [    1.516046] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    1.517524] systemd[1]: Hostname set to <target>.
vm-test-run-update-hardware-configuration> target # [    1.572533] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    1.603790] systemd[1]: Queued start job for default target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    1.608331] systemd[1]: Created slice Slice /system/modprobe.
vm-test-run-update-hardware-configuration> target # [    1.609944] systemd[1]: Created slice Slice /system/systemd-makefs.
vm-test-run-update-hardware-configuration> target # [    1.611359] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    1.613039] systemd[1]: Expecting device /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    1.614185] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    1.615264] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    1.616357] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    1.617360] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    1.618532] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    1.620013] systemd[1]: Listening on Journal Socket (/dev/log).
vm-test-run-update-hardware-configuration> target # [    1.621432] systemd[1]: Listening on Journal Sockets.
vm-test-run-update-hardware-configuration> target # [    1.622639] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    1.623887] systemd[1]: Listening on udev Kernel Socket.
vm-test-run-update-hardware-configuration> target # [    1.625059] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    1.626853] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    1.631404] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    1.641284] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    1.647237] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    1.650191] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    1.656157] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    1.669313] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    1.675641] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    1.680549] systemd-journald[65]: Collecting audit messages is disabled.
vm-test-run-update-hardware-configuration> target # [    1.684530] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    1.690641] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config
vm-test-run-update-hardware-configuration> target # [    1.695055] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
vm-test-run-update-hardware-configuration> target # [    1.702165] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    1.707219] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
vm-test-run-update-hardware-configuration> target # [    1.734689] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    1.743240] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    1.752798] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    1.765243] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    1.778172] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    1.789732] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    1.795367] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    1.799171] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    1.806248] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    1.839207] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    1.656337] systemd-modules-load[66]: Inserted module 'dm_mod'
vm-test-run-update-hardware-configuration> target # [    1.657915] systemd-modules-load[66]: Inserted module 'virtio_balloon'
vm-test-run-update-hardware-configuration> target # [    1.662201] systemd-modules-load[66]: Inserted module 'virtio_gpu'
vm-test-run-update-hardware-configuration> target # [    1.667319] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    1.677066] systemd-udevd[73]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    1.699941] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    1.711441] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    1.729720] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    1.730790] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    1.731852] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    2.104643] virtio_blk virtio2: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.129741] virtio_blk virtio2: [vda] 16777216 512-byte logical blocks (8.59 GB/8.00 GiB)
vm-test-run-update-hardware-configuration> target # [    2.146650] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
vm-test-run-update-hardware-configuration> target # [    2.159324] virtio_blk virtio3: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.162867] serio: i8042 KBD port at 0x60,0x64 irq 1
vm-test-run-update-hardware-configuration> target # [    2.167956] virtio_blk virtio3: [vdb] 1048576 512-byte logical blocks (537 MB/512 MiB)
vm-test-run-update-hardware-configuration> target # [    2.169494] serio: i8042 AUX port at 0x60,0x64 irq 12
vm-test-run-update-hardware-configuration> target # [    2.181164] ehci-pci 0000:00:1d.7: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.182005] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
vm-test-run-update-hardware-configuration> target # [    2.183903] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdc000
vm-test-run-update-hardware-configuration> target # [    2.191124] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
vm-test-run-update-hardware-configuration> target # [    2.192383] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.193658] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.196680] usb usb1: Product: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.198360] usb usb1: Manufacturer: Linux 6.18.56 ehci_hcd
vm-test-run-update-hardware-configuration> target # [    2.200401] usb usb1: SerialNumber: 0000:00:1d.7
vm-test-run-update-hardware-configuration> target # [    2.203210] hub 1-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.203862] hub 1-0:1.0: 6 ports detected
vm-test-run-update-hardware-configuration> target # [    2.205795] uhci_hcd 0000:00:1d.0: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.206658] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
vm-test-run-update-hardware-configuration> target # [    2.222208] uhci_hcd 0000:00:1d.0: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.233997] SCSI subsystem initialized
vm-test-run-update-hardware-configuration> target # [    2.235353] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200
vm-test-run-update-hardware-configuration> target # [    2.057975] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    2.061819] (udev-worker)[94]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.068711] (udev-worker)[100]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.267161] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.268480] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.091684] systemd-vconsole-setup[104]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [    2.095939] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    2.289642] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
vm-test-run-update-hardware-configuration> target # [    2.300400] usb usb2: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.304495] usb usb2: Manufacturer: Linux 6.18.56 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.311459] usb usb2: SerialNumber: 0000:00:1d.0
vm-test-run-update-hardware-configuration> target # [    2.131880] systemd[1]: Found device /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.133557] systemd[1]: Reached target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    2.318824] hub 2-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.137075] systemd[1]: Starting Make File System on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.322434] hub 2-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.331511] uhci_hcd 0000:00:1d.1: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.332380] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
vm-test-run-update-hardware-configuration> target # [    2.337159] uhci_hcd 0000:00:1d.1: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.340236] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220
vm-test-run-update-hardware-configuration> target # [    2.342610] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.162214] systemd-makefs[110]: Formatting /dev/vdb as ext4
vm-test-run-update-hardware-configuration> target # [    2.350154] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.353099] usb usb3: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.353902] usb usb3: Manufacturer: Linux 6.18.56 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.359082] usb usb3: SerialNumber: 0000:00:1d.1
vm-test-run-update-hardware-configuration> target # [    2.360706] hub 3-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.363087] hub 3-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.366980] uhci_hcd 0000:00:1d.2: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.367842] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
vm-test-run-update-hardware-configuration> target # [    2.370341] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
vm-test-run-update-hardware-configuration> target # [    2.371635] uhci_hcd 0000:00:1d.2: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.372834] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
vm-test-run-update-hardware-configuration> target # [    2.374092] ahci 0000:00:1f.2: flags: 64bit ncq only
vm-test-run-update-hardware-configuration> target # [    2.375394] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240
vm-test-run-update-hardware-configuration> target # [    2.379200] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.381507] scsi host0: ahci
vm-test-run-update-hardware-configuration> target # [    2.382657] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.384551] scsi host1: ahci
vm-test-run-update-hardware-configuration> target # [    2.386168] scsi host2: ahci
vm-test-run-update-hardware-configuration> target # [    2.387408] usb usb4: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.388764] scsi host3: ahci
vm-test-run-update-hardware-configuration> target # [    2.389759] usb usb4: Manufacturer: Linux 6.18.56 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.391357] scsi host4: ahci
vm-test-run-update-hardware-configuration> target # [    2.392576] usb usb4: SerialNumber: 0000:00:1d.2
vm-test-run-update-hardware-configuration> target # [    2.393861] scsi host5: ahci
vm-test-run-update-hardware-configuration> target # [    2.394837] ata1: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd100 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.397387] hub 4-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.398439] hub 4-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.399170] ata2: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd180 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.408042] ata3: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd200 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.409483] ata4: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd280 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.231729] systemd-makefs[110]: /dev/vdb successfully formatted as ext4 (label "vdb", uuid 1ca99af8-bbbb-4c69-8fca-7b10267b4274)
vm-test-run-update-hardware-configuration> target # [    2.235185] systemd[1]: Finished Make File System on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.239489] systemd[1]: Starting File System Check on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.434814] ata5: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd300 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.445092] usb 1-1: new high-speed USB device number 2 using ehci-pci
vm-test-run-update-hardware-configuration> target # [    2.446956] ata6: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd380 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.264936] systemd-fsck[130]: vdb: clean, 12/32768 files, 6385/131072 blocks
vm-test-run-update-hardware-configuration> target # [    2.270373] systemd[1]: Finished File System Check on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.574975] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
vm-test-run-update-hardware-configuration> target # [    2.576293] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
vm-test-run-update-hardware-configuration> target # [    2.577738] usb 1-1: Product: QEMU USB Tablet
vm-test-run-update-hardware-configuration> target # [    2.578576] usb 1-1: Manufacturer: QEMU
vm-test-run-update-hardware-configuration> target # [    2.579339] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1
vm-test-run-update-hardware-configuration> target # [    2.593946] hid: raw HID events driver (C) Jiri Kosina
vm-test-run-update-hardware-configuration> target # [    2.483101] systemd[1]: Mounting /sysroot...
vm-test-run-update-hardware-configuration> target # [    2.764520] ata6: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.765926] ata4: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.767252] ata2: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.768368] ata5: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.769481] ata1: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.770634] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.771769] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
vm-test-run-update-hardware-configuration> target # [    2.772763] ata3.00: applying bridge limits
vm-test-run-update-hardware-configuration> target # [    2.773650] ata3.00: configured for UDMA/100
vm-test-run-update-hardware-configuration> target # [    2.774825] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
vm-test-run-update-hardware-configuration> target # [    2.825190] usbcore: registered new interface driver usbhid
vm-test-run-update-hardware-configuration> target # [    2.826095] usbhid: USB HID core driver
vm-test-run-update-hardware-configuration> target # [    2.845850] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2
vm-test-run-update-hardware-configuration> target # [    2.851267] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
vm-test-run-update-hardware-configuration> target # [    2.855664] EXT4-fs (vdb): mounted filesystem 1ca99af8-bbbb-4c69-8fca-7b10267b4274 r/w with ordered data mode. Quota mode: none.
vm-test-run-update-hardware-configuration> target # [    2.866102] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
vm-test-run-update-hardware-configuration> target # [    2.693801] systemd[1]: Mounted /sysroot.
vm-test-run-update-hardware-configuration> target # [    2.695616] systemd[1]: Reached target Initrd Root File System.
vm-test-run-update-hardware-configuration> target # [    2.880850] cdrom: Uniform CD-ROM driver Revision: 3.20
vm-test-run-update-hardware-configuration> target # [    2.698855] systemd[1]: Starting Mountpoints Configured in the Real Root...
vm-test-run-update-hardware-configuration> target # [    2.711990] systemd-sysroot-fstab-check[150]: /sysroot should be mounted in the initrd, will request daemon-reload.
vm-test-run-update-hardware-configuration> target # [    2.714947] systemd[1]: Reload requested from client PID 150 ('systemd-sysroot') (unit initrd-parse-etc.service)...
vm-test-run-update-hardware-configuration> target # [    2.716810] systemd[1]: Reloading...
vm-test-run-update-hardware-configuration> target # [    2.787529] systemd[1]: Reloading finished in 69 ms.
vm-test-run-update-hardware-configuration> target # [    2.795699] systemd-sysroot-fstab-check[150]: Requesting initrd-fs.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    2.800213] systemd-sysroot-fstab-check[150]: Requesting swap.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    2.803275] systemd[1]: initrd-parse-etc.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    2.805078] systemd[1]: Finished Mountpoints Configured in the Real Root.
vm-test-run-update-hardware-configuration> target # [    2.807192] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.
vm-test-run-update-hardware-configuration> target # [    4.467332] systemd[1]: Mounting /sysroot/nix/.ro-store...
vm-test-run-update-hardware-configuration> target # [    4.470114] systemd[1]: Mounting /sysroot/nix/.rw-store...
vm-test-run-update-hardware-configuration> target # [    4.476740] systemd[1]: Mounting /sysroot/run...
vm-test-run-update-hardware-configuration> target # [    4.478071] systemd[1]: Mounting /sysroot/tmp/shared...
vm-test-run-update-hardware-configuration> target # [    4.486474] systemd[1]: Mounting /sysroot/tmp/xchg...
vm-test-run-update-hardware-configuration> target # [    4.503923] systemd[1]: Mounted /sysroot/nix/.ro-store.
vm-test-run-update-hardware-configuration> target # [    4.508902] systemd[1]: Mounted /sysroot/nix/.rw-store.
vm-test-run-update-hardware-configuration> target # [    4.512153] systemd[1]: Mounted /sysroot/run.
vm-test-run-update-hardware-configuration> target # [    4.512992] systemd[1]: Mounted /sysroot/tmp/shared.
vm-test-run-update-hardware-configuration> target # [    4.514852] systemd[1]: Mounted /sysroot/tmp/xchg.
vm-test-run-update-hardware-configuration> target # [    4.518702] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    4.528209] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.530911] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    4.532169] systemd[1]: Mounting /sysroot/nix/store...
vm-test-run-update-hardware-configuration> target # [    4.549265] systemd[1]: Mounted /sysroot/nix/store.
vm-test-run-update-hardware-configuration> target # [    4.551062] systemd[1]: Reached target Initrd File Systems.
vm-test-run-update-hardware-configuration> target # [    4.552305] systemd[1]: Starting Find NixOS closure...
vm-test-run-update-hardware-configuration> target # [    4.555141] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...
vm-test-run-update-hardware-configuration> target # [    4.570153] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    4.574806] systemd[1]: Finished Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    4.576395] systemd[1]: Reached target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    4.579384] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...
vm-test-run-update-hardware-configuration> target # [    4.589059] systemd[1]: Stopped target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    4.591064] systemd[1]: Stopped target Basic System.
vm-test-run-update-hardware-configuration> target # [    4.592036] systemd[1]: Stopped target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    4.593133] systemd[1]: Stopped target Path Units.
vm-test-run-update-hardware-configuration> target # [    4.594058] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.595782] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    4.597565] systemd[1]: Stopped target Slice Units.
vm-test-run-update-hardware-configuration> target # [    4.599166] systemd[1]: Stopped target Socket Units.
vm-test-run-update-hardware-configuration> target # [    4.600190] systemd[1]: Stopped target System Initialization.
vm-test-run-update-hardware-configuration> target # [    4.601237] systemd[1]: Stopped target Swaps.
vm-test-run-update-hardware-configuration> target # [    4.602668] systemd[1]: Stopped target Timer Units.
vm-test-run-update-hardware-configuration> target # [    4.603593] systemd[1]: dbus.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.604745] systemd[1]: Closed D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    4.607145] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.608428] systemd[1]: Stopped Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    4.609341] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    4.610396] systemd[1]: systemd-sysctl.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.611683] systemd[1]: Stopped Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    4.612912] systemd[1]: systemd-modules-load.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.615170] systemd[1]: Stopped Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    4.616127] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.617589] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    4.618919] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.620989] systemd[1]: Stopped Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    4.622151] systemd[1]: Stopped target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    4.623194] systemd[1]: Stopped target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    4.625168] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.626464] systemd[1]: Stopped Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    4.628395] systemd[1]: Stopping Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    4.632779] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.634075] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    4.638226] systemd[1]: initrd-cleanup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.641963] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.
vm-test-run-update-hardware-configuration> target # [    4.643209] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.646076] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    4.653450] systemd[1]: systemd-udevd.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.655341] systemd[1]: Stopped Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    4.657719] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.658981] systemd[1]: Closed udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    4.660181] systemd[1]: Starting Cleanup udev Database...
vm-test-run-update-hardware-configuration> target # [    4.662207] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.663761] systemd[1]: Stopped Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    4.664967] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.666708] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    4.668147] systemd[1]: kmod-static-nodes.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.670136] systemd[1]: Stopped Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    4.680258] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.682213] systemd[1]: Finished Cleanup udev Database.
vm-test-run-update-hardware-configuration> target # [    4.684199] systemd[1]: Reached target Switch Root.
vm-test-run-update-hardware-configuration> target # [    4.685580] systemd[1]: Starting NixOS Activation...
vm-test-run-update-hardware-configuration> target # [    4.758744] initrd-nixos-activation-start[202]: booting system configuration /nix/store/4knrinnlra2bn3vs9475y93vwsdzlkg3-nixos-system-target-test
vm-test-run-update-hardware-configuration> target # [    4.784407] initrd-nixos-activation-start[202]: running activation script...
vm-test-run-update-hardware-configuration> target # [    4.952233] initrd-nixos-activation-start[225]: setting up /etc...
vm-test-run-update-hardware-configuration> target # [    5.039132] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.041090] systemd[1]: Finished NixOS Activation.
vm-test-run-update-hardware-configuration> target # [    5.043085] systemd[1]: Starting Switch Root...
vm-test-run-update-hardware-configuration> target # [    5.053195] systemd[1]: Switching root.
vm-test-run-update-hardware-configuration> target # [    5.360249] systemd-journald[65]: Received SIGTERM from PID 1 (systemd).
vm-test-run-update-hardware-configuration> target # [    5.716436] NET: Registered PF_VSOCK protocol family
vm-test-run-update-hardware-configuration> target # [    6.084755] systemd[1]: systemd 261.3 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    6.089448] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    6.090294] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    6.091195] systemd[1]: Detected first boot.
vm-test-run-update-hardware-configuration> target # [    6.093086] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    6.162634] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    6.232284] systemd[1]: Applying preset policy.
vm-test-run-update-hardware-configuration> target # [    6.373987] systemd[1]: Populated /etc with preset unit settings.
vm-test-run-update-hardware-configuration> target # [    6.552969] systemd[1]: initrd-switch-root.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    6.554554] systemd[1]: Stopped initrd-switch-root.service.
vm-test-run-update-hardware-configuration> target # [    6.557244] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
vm-test-run-update-hardware-configuration> target # [    6.559406] systemd[1]: Created slice Slice /system/getty.
vm-test-run-update-hardware-configuration> target # [    6.560804] systemd[1]: Created slice User and Session Slice.
vm-test-run-update-hardware-configuration> target # [    6.561874] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    6.563274] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
vm-test-run-update-hardware-configuration> target # [    6.564533] systemd[1]: Expecting device /dev/hvc0...
vm-test-run-update-hardware-configuration> target # [    6.565387] systemd[1]: Expecting device /dev/ttyS0...
vm-test-run-update-hardware-configuration> target # [    6.566298] systemd[1]: Reached target Local Encrypted Volumes.
vm-test-run-update-hardware-configuration> target # [    6.567278] systemd[1]: Stopped target initrd-fs.target.
vm-test-run-update-hardware-configuration> target # [    6.568193] systemd[1]: Stopped target initrd-root-fs.target.
vm-test-run-update-hardware-configuration> target # [    6.569151] systemd[1]: Stopped target initrd-switch-root.target.
vm-test-run-update-hardware-configuration> target # [    6.570177] systemd[1]: Reached target Virtual Machines and Containers.
vm-test-run-update-hardware-configuration> target # [    6.571270] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    6.572136] systemd[1]: Reached target Remote File Systems.
vm-test-run-update-hardware-configuration> target # [    6.573091] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    6.573929] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    6.575644] systemd[1]: Listening on Query the User Interactively for a Password.
vm-test-run-update-hardware-configuration> target # [    6.577984] systemd[1]: Listening on Process Core Dump Socket.
vm-test-run-update-hardware-configuration> target # [    6.579684] systemd[1]: Listening on Credential Encryption/Decryption.
vm-test-run-update-hardware-configuration> target # [    6.581526] systemd[1]: Listening on Factory Reset Management.
vm-test-run-update-hardware-configuration> target # [    6.582606] systemd[1]: Listening on Hostname Service Socket.
vm-test-run-update-hardware-configuration> target # [    6.585376] systemd[1]: Starting Journal Log Access Socket...
vm-test-run-update-hardware-configuration> target # [    6.586605] systemd[1]: Listening on Journal Audit Socket.
vm-test-run-update-hardware-configuration> target # [    6.589045] systemd[1]: Listening on Console Output Muting Service Socket.
vm-test-run-update-hardware-configuration> target # [    6.590304] systemd[1]: Listening on Network Management Metrics Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    6.591678] systemd[1]: Listening on Network Management Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    6.592889] systemd[1]: Listening on Network Management Netlink Socket.
vm-test-run-update-hardware-configuration> target # [    6.594175] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
vm-test-run-update-hardware-configuration> target # [    6.595468] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    6.597001] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
vm-test-run-update-hardware-configuration> target # [    6.600769] systemd[1]: Listening on Disk Repartitioning Service Socket.
vm-test-run-update-hardware-configuration> target # [    6.602032] systemd[1]: Listening on Resolve Monitor Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    6.603196] systemd[1]: Listening on Resolve Service Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    6.604359] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    6.605395] systemd[1]: Listening on udev Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    6.607535] systemd[1]: Mounting Huge Pages File System...
vm-test-run-update-hardware-configuration> target # [    6.610347] systemd[1]: Mounting POSIX Message Queue File System...
vm-test-run-update-hardware-configuration> target # [    6.616725] systemd[1]: Mounting Kernel Debug File System...
vm-test-run-update-hardware-configuration> target # [    6.624042] systemd[1]: Mounting Kernel Trace File System...
vm-test-run-update-hardware-configuration> target # [    6.629373] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    6.642048] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    6.648191] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
vm-test-run-update-hardware-configuration> target # [    6.658386] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore
vm-test-run-update-hardware-configuration> target # [    6.661102] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [    6.671876] systemd[1]: Mounting FUSE Control File System...
vm-test-run-update-hardware-configuration> target # [    6.676019] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
vm-test-run-update-hardware-configuration> target # [    6.686688] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    6.692824] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    6.701407] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...
vm-test-run-update-hardware-configuration> target # [    6.708552] systemd[1]: Starting Remount Root and Kernel File Systems...
vm-test-run-update-hardware-configuration> target # [    6.714437] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    6.723298] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    6.726077] systemd-journald[295]: Collecting audit messages is enabled.
vm-test-run-update-hardware-configuration> target # [    6.734422] systemd[1]: Listening on Journal Log Access Socket.
vm-test-run-update-hardware-configuration> target # [    6.740907] systemd[1]: Mounted Huge Pages File System.
vm-test-run-update-hardware-configuration> target # [    6.743595] systemd[1]: Mounted POSIX Message Queue File System.
vm-test-run-update-hardware-configuration> target # [    6.749238] systemd[1]: Mounted Kernel Debug File System.
vm-test-run-update-hardware-configuration> target # [    6.758256] systemd[1]: Mounted Kernel Trace File System.
vm-test-run-update-hardware-configuration> target # [    6.767169] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    6.587424] systemd[1]: Queued start job for default target Multi-User System.
vm-test-run-update-hardware-configuration> target # [    6.589599] systemd[1]: Unnecessary job was removed for /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    6.775207] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    6.596629] systemd[1]: systemd-journald.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    6.603582] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    6.788982] EXT4-fs (vdb): re-mounted 1ca99af8-bbbb-4c69-8fca-7b10267b4274.
vm-test-run-update-hardware-configuration> target # [    6.609676] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    6.611442] systemd[1]: Mounted FUSE Control File System.
vm-test-run-update-hardware-configuration> target # [    6.796365] loop: module loaded
vm-test-run-update-hardware-configuration> target # [    6.614800] systemd-modules-load[296]: Inserted module 'loop'
vm-test-run-update-hardware-configuration> target # [    6.623672] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    6.624847] systemd[1]: Finished Remount Root and Kernel File Systems.
vm-test-run-update-hardware-configuration> target # [    6.630614] systemd[1]: Listening on Disk Image Download Service Socket.
vm-test-run-update-hardware-configuration> target # [    6.635768] systemd[1]: Mounting Kernel Configuration File System...
vm-test-run-update-hardware-configuration> target # [    6.638688] systemd-oomd[298]: No swap; memory pressure usage will be degraded
vm-test-run-update-hardware-configuration> target # [    6.642076] systemd[1]: Starting Firewall...
vm-test-run-update-hardware-configuration> target # [    6.646971] systemd[1]: Starting Flush Journal to Persistent Storage...
vm-test-run-update-hardware-configuration> target # [    6.649199] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore
vm-test-run-update-hardware-configuration> target # [    6.657976] systemd[1]: Starting Load/Save OS Random Seed...
vm-test-run-update-hardware-configuration> target # [    6.668919] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    6.679773] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    6.681166] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    6.682669] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.
vm-test-run-update-hardware-configuration> target # [    6.883391] systemd-journald[295]: Received client request to flush runtime journal.
vm-test-run-update-hardware-configuration> target # [    6.891620] systemd[1]: Finished Load/Save OS Random Seed.
vm-test-run-update-hardware-configuration> target # [    6.897443] systemd[1]: Reached target First Boot Complete.
vm-test-run-update-hardware-configuration> target # [    6.898654] systemd[1]: Mounted Kernel Configuration File System.
vm-test-run-update-hardware-configuration> target # [    6.902347] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    6.906459] systemd[1]: Starting Network Name Resolution...
vm-test-run-update-hardware-configuration> target # [    6.907598] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    6.910451] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    6.911614] systemd[1]: Finished Flush Journal to Persistent Storage.
vm-test-run-update-hardware-configuration> target # [    6.943364] systemd-resolved[323]: Positive Trust Anchors:
vm-test-run-update-hardware-configuration> target # [    6.944535] systemd-resolved[323]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
vm-test-run-update-hardware-configuration> target # [    6.946733] systemd-resolved[323]: . IN DS 38696 8 2 683d2d0acb8c9b712a1948b27f741219298d0a450d612c483af444a4c0fb2b16
vm-test-run-update-hardware-configuration> target # [    6.950285] systemd-resolved[323]: Negative trust anchors: home.arpa 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 170.0.0.192.in-addr.arpa 171.0.0.192.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa ipv4only.arpa resolver.arpa corp home internal intranet lan local private test
vm-test-run-update-hardware-configuration> target # [    6.975716] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    6.990208] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    6.991393] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    6.993964] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    7.027611] systemd-resolved[323]: Using system hostname 'target'.
vm-test-run-update-hardware-configuration> target # [    7.032086] systemd[1]: Started Network Name Resolution.
vm-test-run-update-hardware-configuration> target # [    7.045597] systemd-udevd[341]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    7.098111] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    7.232929] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [    7.312856] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.
vm-test-run-update-hardware-configuration> target # [    7.361120] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.
vm-test-run-update-hardware-configuration> target # [    7.373124] systemd[1]: Mounting /run/wrappers...
vm-test-run-update-hardware-configuration> target # [    7.392853] (udev-worker)[366]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    7.402328] (udev-worker)[363]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    7.411364] systemd[1]: Mounted /run/wrappers.
vm-test-run-update-hardware-configuration> target # [    7.412339] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    7.416339] systemd[1]: Listening on Boot Loader Control Service Socket.
vm-test-run-update-hardware-configuration> target # [    7.421467] systemd[1]: Starting register-nix-paths.service...
vm-test-run-update-hardware-configuration> target # [    7.425372] systemd[1]: Starting Create SUID/SGID Wrappers...
vm-test-run-update-hardware-configuration> target # [    7.426422] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.
vm-test-run-update-hardware-configuration> target # [    7.431458] systemd[1]: Starting Save Transient machine-id to Disk...
vm-test-run-update-hardware-configuration> target # [    7.441436] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    7.551531] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    7.564917] systemd[1]: Starting Rebuild Journal Catalog...
vm-test-run-update-hardware-configuration> target # [    7.567489] systemd[1]: Starting Record System Boot/Shutdown in UTMP...
vm-test-run-update-hardware-configuration> target # [    7.639684] systemd[1]: Finished Record System Boot/Shutdown in UTMP.
vm-test-run-update-hardware-configuration> target # [    7.673283] systemd[1]: Finished Rebuild Journal Catalog.
vm-test-run-update-hardware-configuration> target # [    7.680636] systemd[1]: Starting Update is Completed...
vm-test-run-update-hardware-configuration> target # [    7.733925] systemd[1]: Finished Update is Completed.
vm-test-run-update-hardware-configuration> target # [    7.975530] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
vm-test-run-update-hardware-configuration> target # [    7.984738] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console
vm-test-run-update-hardware-configuration> target # [    7.925656] systemd-resolved[323]: Clock change detected. Flushing caches.
vm-test-run-update-hardware-configuration> target # [    8.044983] ACPI: button: Power Button [PWRF]
vm-test-run-update-hardware-configuration> target # [    8.073399] mousedev: PS/2 mouse device common for all mice
vm-test-run-update-hardware-configuration> target # [    8.107430] rtc_cmos PNP0B00:00: RTC can wake from S4
vm-test-run-update-hardware-configuration> target # [    8.109034] rtc_cmos PNP0B00:00: registered as rtc0
vm-test-run-update-hardware-configuration> target # [    8.109141] rtc_cmos PNP0B00:00: setting system clock to 2026-10-16T09:31:53 UTC (1792143113)
vm-test-run-update-hardware-configuration> target # [    8.016199] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    8.021826] systemd[1]: Finished Save Transient machine-id to Disk.
vm-test-run-update-hardware-configuration> target # [    8.109247] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
vm-test-run-update-hardware-configuration> target # [    8.110873] systemd-journald[295]: Time jumped backwards, rotating.
vm-test-run-update-hardware-configuration> target # [    8.122183] Console: switching to colour dummy device 80x25
vm-test-run-update-hardware-configuration> target # [    8.173514] parport_pc 00:02: reported by Plug and Play ACPI
vm-test-run-update-hardware-configuration> target # [    8.173618] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
vm-test-run-update-hardware-configuration> target # [    8.176696] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:07.0/virtio5/input/input4
vm-test-run-update-hardware-configuration> target # [    8.198824] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
vm-test-run-update-hardware-configuration> target # [    8.145052] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    8.148242] systemd[1]: Finished Create SUID/SGID Wrappers.
vm-test-run-update-hardware-configuration> target # [    8.342553] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
vm-test-run-update-hardware-configuration> target # [    8.343387] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
vm-test-run-update-hardware-configuration> target # [    8.164146] systemd[1]: Finished Firewall.
vm-test-run-update-hardware-configuration> target # [    8.164990] systemd[1]: Reached target Preparation for Network.
vm-test-run-update-hardware-configuration> target # [    8.167096] systemd[1]: Listening on Network Management Resolve Hook Socket.
vm-test-run-update-hardware-configuration> target # [    8.172499] systemd[1]: Starting Network Management...
vm-test-run-update-hardware-configuration> target # [    8.357953] [drm] Found bochs VGA, ID 0xb0c5.
vm-test-run-update-hardware-configuration> target # [    8.358485] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
vm-test-run-update-hardware-configuration> target # [    8.189195] systemd[1]: Finished register-nix-paths.service.
vm-test-run-update-hardware-configuration> target # [    8.190558] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    8.193635] systemd[1]: Started Discard unused filesystem blocks once a week.
vm-test-run-update-hardware-configuration> target # [    8.194922] systemd[1]: Started Daily Cleanup of Temporary Directories.
vm-test-run-update-hardware-configuration> target # [    8.197167] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    8.198746] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    8.201209] systemd[1]: Listening on Nix Daemon Socket.
vm-test-run-update-hardware-configuration> target # [    8.203310] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).
vm-test-run-update-hardware-configuration> target # [    8.204941] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.
vm-test-run-update-hardware-configuration> target # [    8.206930] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    8.208327] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    8.211155] systemd[1]: Started backdoor.service.
vm-test-run-update-hardware-configuration> target # [    8.216087] systemd[1]: Starting Import lastlog data into lastlog2 database...
vm-test-run-update-hardware-configuration> target # [    8.219795] systemd[1]: Starting Name Service Cache Daemon (nsncd)...
vm-test-run-update-hardware-configuration> target # [    8.411484] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic
vm-test-run-update-hardware-configuration> target # [    8.412334] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0
vm-test-run-update-hardware-configuration> target # [    8.231986] systemd[1]: Starting Post-Boot Actions...
vm-test-run-update-hardware-configuration> target # [    8.248119] systemd[1]: Started Reset console on configuration changes.
vm-test-run-update-hardware-configuration> target # [    8.264330] systemd[1]: Starting SSH Host Keys Generation...
vm-test-run-update-hardware-configuration> target # [    8.302792] systemd[1]: Starting D-Bus System Message Bus...
vm-test-run-update-hardware-configuration> target # [    8.491189] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6
vm-test-run-update-hardware-configuration> target # [    8.496216] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5
vm-test-run-update-hardware-configuration> target # [    8.331755] nsncd[531]: Oct 16 09:31:53.905 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"
vm-test-run-update-hardware-configuration> target # [    8.337694] systemd[1]: Started Name Service Cache Daemon (nsncd).
vm-test-run-update-hardware-configuration> target # [    8.338829] systemd[1]: Reached target Host and Network Name Lookups.
vm-test-run-update-hardware-configuration> target # [    8.339964] systemd[1]: Reached target User and Group Name Lookups.
vm-test-run-update-hardware-configuration> target # connecting to host...
vm-test-run-update-hardware-configuration> target # [    8.365912] systemd[1]: Starting User Login Management...
vm-test-run-update-hardware-configuration> target # [    8.368902] systemd[1]: Finished Post-Boot Actions.
vm-test-run-update-hardware-configuration> target # [    8.420850] systemd[1]: Finished Import lastlog data into lastlog2 database.
vm-test-run-update-hardware-configuration> target # [    8.450671] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    8.503325] dbus-broker-launch[539]: Looking up NSS user entry for 'systemd-timesync'...
vm-test-run-update-hardware-configuration> target # [    8.531084] dbus-broker-launch[539]: NSS returned no entry for 'systemd-timesync'
vm-test-run-update-hardware-configuration> target # [    8.532405] dbus-broker-launch[539]: Invalid user-name in /nix/store/5c4ly9c8g4jqzlljnhpsria7qpf4g13x-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"
vm-test-run-update-hardware-configuration> target: waiting for TCP port 22 on localhost
vm-test-run-update-hardware-configuration> target: waiting for the VM to finish booting
vm-test-run-update-hardware-configuration> target # [    8.726485] cfg80211: Loading compiled-in X.509 certificates for regulatory database
vm-test-run-update-hardware-configuration> target: Guest shell says: b'Spawning backdoor root shell...\n'
vm-test-run-update-hardware-configuration> target: connected to guest root shell
vm-test-run-update-hardware-configuration> target: (connecting took 0.00 seconds)
vm-test-run-update-hardware-configuration> target: (finished: waiting for the VM to finish booting, in 0.00 seconds)
vm-test-run-update-hardware-configuration> target # [    8.806022] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
vm-test-run-update-hardware-configuration> target # [    8.806112] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
vm-test-run-update-hardware-configuration> target # [    8.806836] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
vm-test-run-update-hardware-configuration> target # [    8.806840] cfg80211: failed to load regulatory.db
vm-test-run-update-hardware-configuration> target # [    8.823474] Console: switching to colour frame buffer device 160x50
vm-test-run-update-hardware-configuration> target # [    8.835942] ppdev: user-space parallel port driver
vm-test-run-update-hardware-configuration> target # [    8.897457] NET: Registered PF_PACKET protocol family
vm-test-run-update-hardware-configuration> target # [    8.946684] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
vm-test-run-update-hardware-configuration> target # [    8.963291] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
vm-test-run-update-hardware-configuration> target # [    8.981967] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device
vm-test-run-update-hardware-configuration> target # [    8.579390] systemd[1]: Started D-Bus System Message Bus.
vm-test-run-update-hardware-configuration> target # [    8.805522] sshd-keygen-start[573]: Generating public/private rsa key pair.
vm-test-run-update-hardware-configuration> target # [    8.806672] sshd-keygen-start[573]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key
vm-test-run-update-hardware-configuration> target # [    8.808129] sshd-keygen-start[573]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
vm-test-run-update-hardware-configuration> target # [    8.811838] sshd-keygen-start[573]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [    8.812804] sshd-keygen-start[573]: SHA256:Nwl8NPC+cHWtE1ED1ScOyPe5EhZ9/eRd2j1Q7jmyJX0 root@target
vm-test-run-update-hardware-configuration> target # [    8.814383] sshd-keygen-start[573]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [    8.815867] sshd-keygen-start[573]: +---[RSA 4096]----+
vm-test-run-update-hardware-configuration> target # [    8.817302] sshd-keygen-start[573]: |        .oo. o==+|
vm-test-run-update-hardware-configuration> target # [    8.820485] sshd-keygen-start[573]: |       . oo.+.+oO|
vm-test-run-update-hardware-configuration> target # [    8.821384] sshd-keygen-start[573]: |        o o..=+XB|
vm-test-run-update-hardware-configuration> target # [    8.822434] sshd-keygen-start[573]: |         + oo.B+B|
vm-test-run-update-hardware-configuration> target # [    8.823331] sshd-keygen-start[573]: |        S *. +oBE|
vm-test-run-update-hardware-configuration> target # [    8.824229] sshd-keygen-start[573]: |         + o. *.o|
vm-test-run-update-hardware-configuration> target # [    8.827591] sshd-keygen-start[573]: |          .  o   |
vm-test-run-update-hardware-configuration> target # [    8.828505] sshd-keygen-start[573]: |                 |
vm-test-run-update-hardware-configuration> target # [    8.829403] sshd-keygen-start[573]: |                 |
vm-test-run-update-hardware-configuration> target # [    8.830301] sshd-keygen-start[573]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [    8.831554] dbus-broker-launch[539]: Ready
vm-test-run-update-hardware-configuration> target # [    8.835275] sshd-keygen-start[589]: Generating public/private ed25519 key pair.
vm-test-run-update-hardware-configuration> target # [    8.836516] sshd-keygen-start[589]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
vm-test-run-update-hardware-configuration> target # [    8.838101] sshd-keygen-start[589]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
vm-test-run-update-hardware-configuration> target # [    8.840385] sshd-keygen-start[589]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [    8.841486] sshd-keygen-start[589]: SHA256:AhO9Miyq6eSPSbG1XHylJwUFIt0YWGLeMJD/itzxgXE root@target
vm-test-run-update-hardware-configuration> target # [    8.845396] sshd-keygen-start[589]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [    8.846437] sshd-keygen-start[589]: +--[ED25519 256]--+
vm-test-run-update-hardware-configuration> target # [    8.847348] sshd-keygen-start[589]: | .o*==+oo.       |
vm-test-run-update-hardware-configuration> target # [    8.848253] sshd-keygen-start[589]: | .o.*+o..        |
vm-test-run-update-hardware-configuration> target # [    8.851310] sshd-keygen-start[589]: |  .oo. . o       |
vm-test-run-update-hardware-configuration> target # [    8.852226] sshd-keygen-start[589]: |  .o=E. +        |
vm-test-run-update-hardware-configuration> target # [    8.853134] sshd-keygen-start[589]: | o o==.+S.       |
vm-test-run-update-hardware-configuration> target # [    8.854051] sshd-keygen-start[589]: |. =ooo..o        |
vm-test-run-update-hardware-configuration> target # [    8.854918] sshd-keygen-start[589]: |o=oo+ .          |
vm-test-run-update-hardware-configuration> target # [    8.857324] sshd-keygen-start[589]: |*ooo .           |
vm-test-run-update-hardware-configuration> target # [    8.858329] sshd-keygen-start[589]: |.=..             |
vm-test-run-update-hardware-configuration> target # [    8.859488] sshd-keygen-start[589]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [    8.862395] systemd-networkd[525]: lo: Link UP
vm-test-run-update-hardware-configuration> target # [    8.864401] sshd[595]: Server listening on 0.0.0.0 port 22.
vm-test-run-update-hardware-configuration> target # [    8.866883] systemd-networkd[525]: lo: Gained carrier
vm-test-run-update-hardware-configuration> target # [    8.869683] sshd[595]: Server listening on :: port 22.
vm-test-run-update-hardware-configuration> target # [    8.871422] systemd-networkd[525]: eth0: Configuring with /etc/systemd/network/99-ethernet-default-dhcp.network.
vm-test-run-update-hardware-configuration> target # [    8.874877] systemd[1]: Started Network Management.
vm-test-run-update-hardware-configuration> target # [    8.875997] systemd[1]: Reached target Network.
vm-test-run-update-hardware-configuration> target # [    8.877689] systemd[1]: Starting Enable Persistent Storage in systemd-networkd...
vm-test-run-update-hardware-configuration> target # [    8.879726] systemd-networkd[525]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [    8.883668] systemd-networkd[525]: eth1: Configuring with /etc/systemd/network/40-eth1.network.
vm-test-run-update-hardware-configuration> target # [    8.886832] systemd[1]: Starting Permit User Sessions...
vm-test-run-update-hardware-configuration> target # [    8.888587] systemd-networkd[525]: eth0: Link UP
vm-test-run-update-hardware-configuration> target # [    8.889943] systemd-networkd[525]: eth0: Gained carrier
vm-test-run-update-hardware-configuration> target # [    8.894143] systemd[1]: sshd-keygen.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    8.895261] systemd[1]: Finished SSH Host Keys Generation.
vm-test-run-update-hardware-configuration> target # [    8.896308] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
vm-test-run-update-hardware-configuration> target # [    8.897643] systemd-networkd[525]: eth1: Link UP
vm-test-run-update-hardware-configuration> target # [    8.899803] systemd-networkd[525]: eth1: Gained carrier
vm-test-run-update-hardware-configuration> target # [    8.900728] systemd-networkd[525]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [    8.903187] systemd[1]: Starting SSH Daemon...
vm-test-run-update-hardware-configuration> target # [    8.904052] systemd-networkd[525]: eth0: DHCPv4 address 10.0.2.15/24, gateway 10.0.2.2 acquired from 10.0.2.2
vm-test-run-update-hardware-configuration> target # [    8.905692] systemd[1]: Finished Permit User Sessions.
vm-test-run-update-hardware-configuration> target # [    8.906666] systemd[1]: Started Getty on tty1.
vm-test-run-update-hardware-configuration> target # [    8.908946] systemd[1]: Reached target Login Prompts.
vm-test-run-update-hardware-configuration> target # [    8.910661] systemd-logind[555]: New seat seat0.
vm-test-run-update-hardware-configuration> target # [    8.912726] systemd-logind[555]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)
vm-test-run-update-hardware-configuration> target # [    8.916263] systemd-logind[555]: Watching system buttons on /dev/input/event2 (Power Button)
vm-test-run-update-hardware-configuration> target # [    8.918602] systemd-logind[555]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)
vm-test-run-update-hardware-configuration> target # [    8.921325] systemd[1]: Finished Enable Persistent Storage in systemd-networkd.
vm-test-run-update-hardware-configuration> target # [    8.924272] systemd[1]: Started User Login Management.
vm-test-run-update-hardware-configuration> target # [    8.927056] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    8.928897] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    8.930157] systemd[1]: Starting linger-users.service...
vm-test-run-update-hardware-configuration> target # [    8.932187] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    8.933450] systemd[1]: Started SSH Daemon.
vm-test-run-update-hardware-configuration> target # [    8.940350] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    8.942158] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    8.950126] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    8.967918] systemd[1]: linger-users.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    8.970408] systemd[1]: Finished linger-users.service.
vm-test-run-update-hardware-configuration> target # [    8.971369] systemd[1]: Reached target Multi-User System.
vm-test-run-update-hardware-configuration> target # [    9.202631] kvm_amd: TSC scaling supported
vm-test-run-update-hardware-configuration> target # [    9.203244] kvm_amd: Nested Virtualization enabled
vm-test-run-update-hardware-configuration> target # [    9.203812] kvm_amd: Nested Paging enabled
vm-test-run-update-hardware-configuration> target # [    9.204914] kvm_amd: LBR virtualization supported
vm-test-run-update-hardware-configuration> target # [    9.205480] kvm_amd: Virtual GIF supported
vm-test-run-update-hardware-configuration> target # [    9.206242] kvm_amd: Virtual NMI enabled
vm-test-run-update-hardware-configuration> target # [    9.230345] EDAC MC: Ver: 3.0.0
vm-test-run-update-hardware-configuration> target # [    9.111862] systemd-vconsole-setup[605]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [    9.115480] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    9.119635] systemd[1]: Startup finished in 898ms (kernel) + 4.609s (initrd) + 3.610s (userspace) = 9.119s.
vm-test-run-update-hardware-configuration> target # Connection to localhost (::1) 22 port [tcp/ssh] succeeded!
vm-test-run-update-hardware-configuration> target: (finished: waiting for TCP port 22 on localhost, in 1.15 seconds)
vm-test-run-update-hardware-configuration> Setting up port forwarding from host port 34497 to guest port 22
vm-test-run-update-hardware-configuration> target # [    9.791195] sshd-session[614]: Connection closed by ::1 port 52614 [preauth]
vm-test-run-update-hardware-configuration> target # [    9.893818] systemd-networkd[525]: eth0: Gained IPv6LL
vm-test-run-update-hardware-configuration> target # [   10.597919] systemd-networkd[525]: eth1: Gained IPv6LL
vm-test-run-update-hardware-configuration> Host port 34497 is now listening
vm-test-run-update-hardware-configuration> target # [   11.791733] sshd-session[616]: Connection closed by 10.0.2.2 port 41136 [preauth]
vm-test-run-update-hardware-configuration> target # [   17.324824] clocksource: Long readout interval, skipping watchdog check: cs_nsec: 1000077894 wd_nsec: 1000077325
vm-test-run-update-hardware-configuration> target # [   29.187367] sshd-session[624]: Accepted publickey for nonrootuser from 10.0.2.2 port 52532 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   29.194524] sshd-session[624]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   29.213612] systemd[1]: Created slice Slice /user/1000.
vm-test-run-update-hardware-configuration> target # [   29.216225] systemd[1]: Starting User Runtime Directory /run/user/1000...
vm-test-run-update-hardware-configuration> target # [   29.232688] systemd-logind[555]: New session '1' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   29.242138] systemd[1]: Finished User Runtime Directory /run/user/1000.
vm-test-run-update-hardware-configuration> target # [   29.246185] systemd[1]: Starting User Manager for UID 1000...
vm-test-run-update-hardware-configuration> target # [   29.261768] (systemd)[630]: pam_unix(systemd-user:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   29.266069] systemd-logind[555]: New session '2' of user 'nonrootuser' with class 'manager' and type 'unspecified'.
vm-test-run-update-hardware-configuration> target # [   29.279714] systemd[630]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   29.362248] systemd[630]: Queued start job for default target Main User Target.
vm-test-run-update-hardware-configuration> target # [   29.364686] systemd[630]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   29.367668] systemd[630]: Created slice User Application Slice.
vm-test-run-update-hardware-configuration> target # [   29.368969] systemd[630]: Started Daily Cleanup of User's Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   29.371210] systemd[630]: Reached target Paths.
vm-test-run-update-hardware-configuration> target # [   29.372229] systemd[630]: Reached target Timers.
vm-test-run-update-hardware-configuration> target # [   29.373843] systemd[630]: Starting D-Bus User Message Bus Socket...
vm-test-run-update-hardware-configuration> target # [   29.377294] systemd[630]: Starting Create User Files and Directories...
vm-test-run-update-hardware-configuration> target # [   29.397529] systemd[630]: Finished Create User Files and Directories.
vm-test-run-update-hardware-configuration> target # [   29.418636] systemd[630]: Listening on D-Bus User Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   29.419861] systemd[630]: Reached target Sockets.
vm-test-run-update-hardware-configuration> target # [   29.421469] systemd[630]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   29.424403] systemd[1]: Started User Manager for UID 1000.
vm-test-run-update-hardware-configuration> target # [   29.425954] systemd[630]: Starting Run user-specific NixOS activation...
vm-test-run-update-hardware-configuration> target # [   29.429457] systemd[1]: Started Session 1 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   29.453409] systemd[630]: Finished Run user-specific NixOS activation.
vm-test-run-update-hardware-configuration> target # [   29.454908] systemd[630]: Reached target Main User Target.
vm-test-run-update-hardware-configuration> target # [   29.456457] systemd[630]: Startup finished in 179ms.
vm-test-run-update-hardware-configuration> target # [   29.497854] sudo[651]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-facter
vm-test-run-update-hardware-configuration> target # [   29.504581] sudo[651]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   29.780979] sr 2:0:0:0: Attached scsi generic sg0 type 5
vm-test-run-update-hardware-configuration> target # [   29.705484] sudo[651]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   29.714228] sshd-session[642]: Received disconnect from 10.0.2.2 port 52532:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   29.715792] sshd-session[642]: Disconnected from user nonrootuser 10.0.2.2 port 52532
vm-test-run-update-hardware-configuration> target # [   29.717399] sshd-session[624]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   29.721345] systemd-logind[555]: Session 1 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> target # [   46.714624] sshd-session[682]: Accepted publickey for nonrootuser from 10.0.2.2 port 47072 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   46.721174] sshd-session[682]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   46.726737] systemd-logind[555]: New session '3' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   46.731611] systemd[1]: Started Session 3 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   46.780717] sudo[692]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-generate-config --no-filesystems --show-hardware-config
vm-test-run-update-hardware-configuration> target # [   46.787505] sudo[692]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   46.958724] sudo[692]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   46.969966] sshd-session[685]: Received disconnect from 10.0.2.2 port 47072:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   46.971596] sshd-session[685]: Disconnected from user nonrootuser 10.0.2.2 port 47072
vm-test-run-update-hardware-configuration> target # [   46.973363] sshd-session[682]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   46.979132] systemd-logind[555]: Session 3 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> (finished: run the VM test script, in 48.68 seconds)
vm-test-run-update-hardware-configuration> test script finished in 48.75s
vm-test-run-update-hardware-configuration> cleanup
vm-test-run-update-hardware-configuration> kill QemuMachine (pid 45)
vm-test-run-update-hardware-configuration> target # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/lb41b0anx1f98y9y5s9mdv97gjgsq740-python3-3.14.7/bin/python3.14)
vm-test-run-update-hardware-configuration> target # [2026-10-16T09:32:33Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-10-16T09:32:33Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-10-16T09:32:33Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> (finished: cleanup, in 0.11 seconds)