don't know how to build these paths:
  /nix/store/shl461k7n3s0vv1izc0bxrsxclp2mjai-vm-test-run-update-hardware-configuration.drv
warning: ignoring the client-specified setting 'store', because it is a restricted setting and you are not a trusted user
building '/nix/store/d3srq3bvil4j9jv2hrnsi13mxd3hwsln-test-script.drv' on nix-store.geninf.io:50051
test-script> gi-build-x86-02: building d3srq3bvil4j9jv2hrnsi13mxd3hwsln-test-script.drv
test-script> structuredAttrs is enabled
building '/nix/store/aw83r8chapzr5n2s6fayjr2hi6rhyyky-driverConfiguration.json.drv' on nix-store.geninf.io:50051
driverConfiguration.json> gi-build-x86-02: building aw83r8chapzr5n2s6fayjr2hi6rhyyky-driverConfiguration.json.drv
driverConfiguration.json> structuredAttrs is enabled
building '/nix/store/3hc3q5jhl0d5j74lpg76p08m7aiynm6c-nixos-test-driver-update-hardware-configuration.drv' on nix-store.geninf.io:50051
nixos-test-driver-update-hardware-configuration> build-x86-01: building 3hc3q5jhl0d5j74lpg76p08m7aiynm6c-nixos-test-driver-update-hardware-configuration.drv
nixos-test-driver-update-hardware-configuration> Running type check (enable/disable: config.skipTypeCheck)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck
nixos-test-driver-update-hardware-configuration> All checks passed!
nixos-test-driver-update-hardware-configuration> Linting test script (enable/disable: config.skipLint)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint
nixos-test-driver-update-hardware-configuration> All checks passed!
building '/nix/store/shl461k7n3s0vv1izc0bxrsxclp2mjai-vm-test-run-update-hardware-configuration.drv' on nix-store.geninf.io:50051
vm-test-run-update-hardware-configuration> build-x86-01: building shl461k7n3s0vv1izc0bxrsxclp2mjai-vm-test-run-update-hardware-configuration.drv
vm-test-run-update-hardware-configuration> Machine state will be reset. To keep it, pass --keep-machine-state
vm-test-run-update-hardware-configuration> start all VLans
vm-test-run-update-hardware-configuration> (finished: start all VLans, in 0.00 seconds)
vm-test-run-update-hardware-configuration> Test will time out and terminate in 3600.0 seconds
vm-test-run-update-hardware-configuration> run the VM test script
vm-test-run-update-hardware-configuration> additionally exposed symbols:
vm-test-run-update-hardware-configuration>     target,
vm-test-run-update-hardware-configuration>     vlan1,
vm-test-run-update-hardware-configuration>     start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh
vm-test-run-update-hardware-configuration> target: starting vm
vm-test-run-update-hardware-configuration> target # Disk image does not exist, creating the virtualisation disk image...
vm-test-run-update-hardware-configuration> target: QEMU running (pid 45)
vm-test-run-update-hardware-configuration> target # Formatting '/build/vm-state-target/tmp.bZbLt7JGM4', fmt=raw size=8589934592
vm-test-run-update-hardware-configuration> target # mke2fs 1.47.4 (6-Mar-2025)
vm-test-run-update-hardware-configuration> target # Discarding device blocks:       0/2097152               done
vm-test-run-update-hardware-configuration> target # Creating filesystem with 2097152 4k blocks and 524288 inodes
vm-test-run-update-hardware-configuration> target # Filesystem UUID: 57511f29-2cb6-4b53-82ae-5f28412f2409
vm-test-run-update-hardware-configuration> target # Superblock backups stored on blocks:
vm-test-run-update-hardware-configuration> target # 	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Allocating group tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Writing inode tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Creating journal (16384 blocks): done
vm-test-run-update-hardware-configuration> target # Writing superblocks and filesystem accounting information:  0/64     done
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Virtualisation disk image created.
vm-test-run-update-hardware-configuration> target # Formatting 'empty0.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=536870912 lazy_refcounts=off refcount_bits=16
vm-test-run-update-hardware-configuration> target # Starting virtiofs daemons...
vm-test-run-update-hardware-configuration> target # [2026-10-19T08:47:27Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-19T08:47:27Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-19T08:47:27Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-19T08:47:27Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-19T08:47:27Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-19T08:47:27Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-19T08:47:27Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-19T08:47:27Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-19T08:47:27Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-19T08:47:27Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-10-19T08:47:27Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-10-19T08:47:27Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC550+7EF2C550 CA00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:02.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:06.0 CB00 PCI2.10 PnP PMM 7EFCC550 7EF2C550 CB00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:06.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Booting from ROM...
vm-test-run-update-hardware-configuration> target # Probing EDD (edd=off to disable)... ok[    0.000000] Linux version 6.18.56 (nixbld@localhost) (gcc (GCC) 16.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC @1791725172
vm-test-run-update-hardware-configuration> target # [    0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/4knrinnlra2bn3vs9475y93vwsdzlkg3-nixos-system-target-test/init regInfo=/nix/.ro-store/c9v7ggk8ys9pdllgpcrc1zlzbnnzbdah-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-provided physical RAM map:
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd4fff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000007ffd5000-0x000000007fffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013e7fffff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] NX (Execute Disable) protection: active
vm-test-run-update-hardware-configuration> target # [    0.000000] APIC: Static calls initialized
vm-test-run-update-hardware-configuration> target # [    0.000000] SMBIOS 2.8 present.
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: Memory slots populated: 1/1
vm-test-run-update-hardware-configuration> target # [    0.000000] Hypervisor detected: KVM
vm-test-run-update-hardware-configuration> target # [    0.000000] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
vm-test-run-update-hardware-configuration> target # [    0.000001] kvm-clock: using sched offset of 413368603 cycles
vm-test-run-update-hardware-configuration> target # [    0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
vm-test-run-update-hardware-configuration> target # [    0.000007] tsc: Detected 4192.124 MHz processor
vm-test-run-update-hardware-configuration> target # [    0.000564] last_pfn = 0x13e800 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000594] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
vm-test-run-update-hardware-configuration> target # [    0.000597] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
vm-test-run-update-hardware-configuration> target # [    0.000639] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.002236] found SMP MP-table at [mem 0x000f5450-0x000f545f]
vm-test-run-update-hardware-configuration> target # [    0.002252] Using GB pages for direct mapping
vm-test-run-update-hardware-configuration> target # [    0.002314] RAMDISK: [mem 0x7e2e3000-0x7ffcffff]
vm-test-run-update-hardware-configuration> target # [    0.002320] ACPI: Early table checksum verification disabled
vm-test-run-update-hardware-configuration> target # [    0.002325] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS )
vm-test-run-update-hardware-configuration> target # [    0.002328] ACPI: RSDT 0x000000007FFE2433 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002333] ACPI: FACP 0x000000007FFE222B 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002339] ACPI: DSDT 0x000000007FFE0040 0021EB (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002341] ACPI: FACS 0x000000007FFE0000 000040
vm-test-run-update-hardware-configuration> target # [    0.002343] ACPI: APIC 0x000000007FFE231F 000078 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002344] ACPI: HPET 0x000000007FFE2397 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002345] ACPI: MCFG 0x000000007FFE23CF 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002347] ACPI: WAET 0x000000007FFE240B 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002351] ACPI: Reserving FACP table memory at [mem 0x7ffe222b-0x7ffe231e]
vm-test-run-update-hardware-configuration> target # [    0.002351] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe222a]
vm-test-run-update-hardware-configuration> target # [    0.002352] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
vm-test-run-update-hardware-configuration> target # [    0.002352] ACPI: Reserving APIC table memory at [mem 0x7ffe231f-0x7ffe2396]
vm-test-run-update-hardware-configuration> target # [    0.002353] ACPI: Reserving HPET table memory at [mem 0x7ffe2397-0x7ffe23ce]
vm-test-run-update-hardware-configuration> target # [    0.002353] ACPI: Reserving MCFG table memory at [mem 0x7ffe23cf-0x7ffe240a]
vm-test-run-update-hardware-configuration> target # [    0.002353] ACPI: Reserving WAET table memory at [mem 0x7ffe240b-0x7ffe2432]
vm-test-run-update-hardware-configuration> target # [    0.002723] No NUMA configuration found
vm-test-run-update-hardware-configuration> target # [    0.002724] Faking a node at [mem 0x0000000000000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002727] NODE_DATA(0) allocated [mem 0x13e7fa780-0x13e7ffcff]
vm-test-run-update-hardware-configuration> target # [    0.002805] Zone ranges:
vm-test-run-update-hardware-configuration> target # [    0.002805]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
vm-test-run-update-hardware-configuration> target # [    0.002806]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
vm-test-run-update-hardware-configuration> target # [    0.002807]   Normal   [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002808]   Device   empty
vm-test-run-update-hardware-configuration> target # [    0.002808] Movable zone start for each node
vm-test-run-update-hardware-configuration> target # [    0.002809] Early memory node ranges
vm-test-run-update-hardware-configuration> target # [    0.002809]   node   0: [mem 0x0000000000001000-0x000000000009efff]
vm-test-run-update-hardware-configuration> target # [    0.002810]   node   0: [mem 0x0000000000100000-0x000000007ffd4fff]
vm-test-run-update-hardware-configuration> target # [    0.002811]   node   0: [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002812] Initmem setup node 0 [mem 0x0000000000001000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002828] On node 0, zone DMA: 1 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.003026] On node 0, zone DMA: 97 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.043628] On node 0, zone Normal: 43 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.043932] On node 0, zone Normal: 6144 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.044761] ACPI: PM-Timer IO Port: 0x608
vm-test-run-update-hardware-configuration> target # [    0.044776] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
vm-test-run-update-hardware-configuration> target # [    0.044803] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
vm-test-run-update-hardware-configuration> target # [    0.044805] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
vm-test-run-update-hardware-configuration> target # [    0.044807] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
vm-test-run-update-hardware-configuration> target # [    0.044807] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
vm-test-run-update-hardware-configuration> target # [    0.044808] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
vm-test-run-update-hardware-configuration> target # [    0.044809] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
vm-test-run-update-hardware-configuration> target # [    0.044811] ACPI: Using ACPI (MADT) for SMP configuration information
vm-test-run-update-hardware-configuration> target # [    0.044812] ACPI: HPET id: 0x8086a201 base: 0xfed00000
vm-test-run-update-hardware-configuration> target # [    0.044818] TSC deadline timer available
vm-test-run-update-hardware-configuration> target # [    0.044821] CPU topo: Max. logical packages:   1
vm-test-run-update-hardware-configuration> target # [    0.044822] CPU topo: Max. logical dies:       1
vm-test-run-update-hardware-configuration> target # [    0.044822] CPU topo: Max. dies per package:   1
vm-test-run-update-hardware-configuration> target # [    0.044824] CPU topo: Max. threads per core:   1
vm-test-run-update-hardware-configuration> target # [    0.044825] CPU topo: Num. cores per package:     1
vm-test-run-update-hardware-configuration> target # [    0.044825] CPU topo: Num. threads per package:   1
vm-test-run-update-hardware-configuration> target # [    0.044825] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs
vm-test-run-update-hardware-configuration> target # [    0.044847] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
vm-test-run-update-hardware-configuration> target # [    0.044871] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
vm-test-run-update-hardware-configuration> target # [    0.044872] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
vm-test-run-update-hardware-configuration> target # [    0.044873] PM: hibernation: Registered nosave memory: [mem 0x7ffd5000-0xffffffff]
vm-test-run-update-hardware-configuration> target # [    0.044874] [mem 0xc0000000-0xfed1bfff] available for PCI devices
vm-test-run-update-hardware-configuration> target # [    0.044875] Booting paravirtualized kernel on KVM
vm-test-run-update-hardware-configuration> target # [    0.044878] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
vm-test-run-update-hardware-configuration> target # [    0.048277] setup_percpu: NR_CPUS:512 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
vm-test-run-update-hardware-configuration> target # [    0.049899] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152
vm-test-run-update-hardware-configuration> target # [    0.049944] kvm-guest: PV spinlocks disabled, single CPU
vm-test-run-update-hardware-configuration> target # [    0.049945] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/4knrinnlra2bn3vs9475y93vwsdzlkg3-nixos-system-target-test/init regInfo=/nix/.ro-store/c9v7ggk8ys9pdllgpcrc1zlzbnnzbdah-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.050015] Unknown kernel command line parameters "regInfo=/nix/.ro-store/c9v7ggk8ys9pdllgpcrc1zlzbnnzbdah-closure-info/registration", will be passed to user space.
vm-test-run-update-hardware-configuration> target # [    0.050214] random: crng init done
vm-test-run-update-hardware-configuration> target # [    0.050214] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
vm-test-run-update-hardware-configuration> target # [    0.053408] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.055243] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.055276] software IO TLB: area num 1.
vm-test-run-update-hardware-configuration> target # [    0.112578] Fallback order for Node 0: 0
vm-test-run-update-hardware-configuration> target # [    0.112585] Built 1 zonelists, mobility grouping on.  Total pages: 780147
vm-test-run-update-hardware-configuration> target # [    0.112587] Policy zone: Normal
vm-test-run-update-hardware-configuration> target # [    0.114549] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
vm-test-run-update-hardware-configuration> target # [    0.119829] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
vm-test-run-update-hardware-configuration> target # [    0.125156] allocated 6291456 bytes of page_ext
vm-test-run-update-hardware-configuration> target # [    0.134222] ftrace: allocating 48842 entries in 192 pages
vm-test-run-update-hardware-configuration> target # [    0.134223] ftrace: allocated 192 pages with 2 groups
vm-test-run-update-hardware-configuration> target # [    0.134909] Dynamic Preempt: lazy
vm-test-run-update-hardware-configuration> target # [    0.135043] rcu: Preemptible hierarchical RCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.135044] rcu: 	RCU event tracing is enabled.
vm-test-run-update-hardware-configuration> target # [    0.135044] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.135046] 	Trampoline variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.135046] 	Rude variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.135046] 	Tracing variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.135047] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
vm-test-run-update-hardware-configuration> target # [    0.135048] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
vm-test-run-update-hardware-configuration> target # [    0.135065] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.135067] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.135068] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.138273] NR_IRQS: 33024, nr_irqs: 256, preallocated irqs: 16
vm-test-run-update-hardware-configuration> target # [    0.138528] rcu: srcu_init: Setting srcu_struct sizes based on contention.
vm-test-run-update-hardware-configuration> target # [    0.138536] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
vm-test-run-update-hardware-configuration> target # [    0.138696] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
vm-test-run-update-hardware-configuration> target # [    0.143800] Console: colour VGA+ 80x25
vm-test-run-update-hardware-configuration> target # [    0.143804] printk: legacy console [tty0] enabled
vm-test-run-update-hardware-configuration> target # [    0.175518] printk: legacy console [ttyS0] enabled
vm-test-run-update-hardware-configuration> target # [    0.318058] ACPI: Core revision 20250807
vm-test-run-update-hardware-configuration> target # [    0.319202] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
vm-test-run-update-hardware-configuration> target # [    0.321215] APIC: Switch to symmetric I/O mode setup
vm-test-run-update-hardware-configuration> target # [    0.322437] x2apic enabled
vm-test-run-update-hardware-configuration> target # [    0.323279] APIC: Switched APIC routing to: physical x2apic
vm-test-run-update-hardware-configuration> target # [    0.325306] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
vm-test-run-update-hardware-configuration> target # [    0.326575] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d51807ee, max_idle_ns: 440795380511 ns
vm-test-run-update-hardware-configuration> target # [    0.328714] Calibrating delay loop (skipped) preset value.. 8384.24 BogoMIPS (lpj=4192124)
vm-test-run-update-hardware-configuration> target # [    0.329803] x86/cpu: User Mode Instruction Prevention (UMIP) activated
vm-test-run-update-hardware-configuration> target # [    0.330823] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
vm-test-run-update-hardware-configuration> target # [    0.332710] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
vm-test-run-update-hardware-configuration> target # [    0.333713] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
vm-test-run-update-hardware-configuration> target # [    0.335710] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
vm-test-run-update-hardware-configuration> target # [    0.337710] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
vm-test-run-update-hardware-configuration> target # [    0.338710] Speculative Return Stack Overflow: Mitigation: Safe RET
vm-test-run-update-hardware-configuration> target # [    0.339710] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
vm-test-run-update-hardware-configuration> target # [    0.340717] Spectre V2 : Enabling IBPB for BPF
vm-test-run-update-hardware-configuration> target # [    0.341711] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
vm-test-run-update-hardware-configuration> target # [    0.342711] active return thunk: srso_alias_return_thunk
vm-test-run-update-hardware-configuration> target # [    0.344732] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
vm-test-run-update-hardware-configuration> target # [    0.345716] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
vm-test-run-update-hardware-configuration> target # [    0.346711] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
vm-test-run-update-hardware-configuration> target # [    0.348710] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
vm-test-run-update-hardware-configuration> target # [    0.349710] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
vm-test-run-update-hardware-configuration> target # [    0.350710] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
vm-test-run-update-hardware-configuration> target # [    0.351710] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
vm-test-run-update-hardware-configuration> target # [    0.352710] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
vm-test-run-update-hardware-configuration> target # [    0.353710] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
vm-test-run-update-hardware-configuration> target # [    0.354710] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
vm-test-run-update-hardware-configuration> target # [    0.355710] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
vm-test-run-update-hardware-configuration> target # [    0.357710] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
vm-test-run-update-hardware-configuration> target # [    0.358710] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
vm-test-run-update-hardware-configuration> target # [    0.359710] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
vm-test-run-update-hardware-configuration> target # [    0.360710] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16
vm-test-run-update-hardware-configuration> target # [    0.361710] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]:   24
vm-test-run-update-hardware-configuration> target # [    0.362710] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.
vm-test-run-update-hardware-configuration> target # [    0.393028] Freeing SMP alternatives memory: 48K
vm-test-run-update-hardware-configuration> target # [    0.393716] pid_max: default: 32768 minimum: 301
vm-test-run-update-hardware-configuration> target # [    0.394791] LSM: initializing lsm=capability,landlock,yama,bpf,ima
vm-test-run-update-hardware-configuration> target # [    0.395807] landlock: Up and running.
vm-test-run-update-hardware-configuration> target # [    0.396711] Yama: becoming mindful.
vm-test-run-update-hardware-configuration> target # [    0.397918] LSM support for eBPF active
vm-test-run-update-hardware-configuration> target # [    0.398851] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.399770] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.402989] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2)
vm-test-run-update-hardware-configuration> target # [    0.404147] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
vm-test-run-update-hardware-configuration> target # [    0.404719] ... version:                   2
vm-test-run-update-hardware-configuration> target # [    0.405591] ... bit width:                 48
vm-test-run-update-hardware-configuration> target # [    0.406406] ... generic counters:          6
vm-test-run-update-hardware-configuration> target # [    0.406711] ... generic bitmap:            000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.407711] ... fixed-purpose counters:    0
vm-test-run-update-hardware-configuration> target # [    0.408601] ... fixed-purpose bitmap:      0000000000000000
vm-test-run-update-hardware-configuration> target # [    0.409593] ... value mask:                0000ffffffffffff
vm-test-run-update-hardware-configuration> target # [    0.410607] ... max period:                00007fffffffffff
vm-test-run-update-hardware-configuration> target # [    0.411614] ... global_ctrl mask:          000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.412722] signal: max sigframe size: 3376
vm-test-run-update-hardware-configuration> target # [    0.413716] rcu: Hierarchical SRCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.414707] rcu: 	Max phase no-delay instances is 400.
vm-test-run-update-hardware-configuration> target # [    0.418973] smp: Bringing up secondary CPUs ...
vm-test-run-update-hardware-configuration> target # [    0.419728] smp: Brought up 1 node, 1 CPU
vm-test-run-update-hardware-configuration> target # [    0.420578] smpboot: Total of 1 processors activated (8384.24 BogoMIPS)
vm-test-run-update-hardware-configuration> target # [    0.421893] Memory: 2907164K/3120588K available (18132K kernel code, 2734K rwdata, 13652K rodata, 3660K init, 3620K bss, 201804K reserved, 0K cma-reserved)
vm-test-run-update-hardware-configuration> target # [    0.422952] devtmpfs: initialized
vm-test-run-update-hardware-configuration> target # [    0.423937] x86/mm: Memory block size: 128MB
vm-test-run-update-hardware-configuration> target # [    0.425696] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.426739] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).
vm-test-run-update-hardware-configuration> target # [    0.427790] pinctrl core: initialized pinctrl subsystem
vm-test-run-update-hardware-configuration> target # [    0.428970] PM: RTC time: 08:47:27, date: 2026-10-19
vm-test-run-update-hardware-configuration> target # [    0.431850] NET: Registered PF_NETLINK/PF_ROUTE protocol family
vm-test-run-update-hardware-configuration> target # [    0.433326] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.433748] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.435126] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.435724] audit: initializing netlink subsys (disabled)
vm-test-run-update-hardware-configuration> target # [    0.436912] thermal_sys: Registered thermal governor 'fair_share'
vm-test-run-update-hardware-configuration> target # [    0.436913] thermal_sys: Registered thermal governor 'bang_bang'
vm-test-run-update-hardware-configuration> target # [    0.437712] thermal_sys: Registered thermal governor 'step_wise'
vm-test-run-update-hardware-configuration> target # [    0.438719] audit: type=2000 audit(1792399648.247:1): state=initialized audit_enabled=0 res=1
vm-test-run-update-hardware-configuration> target # [    0.440713] thermal_sys: Registered thermal governor 'user_space'
vm-test-run-update-hardware-configuration> target # [    0.440715] thermal_sys: Registered thermal governor 'power_allocator'
vm-test-run-update-hardware-configuration> target # [    0.441731] cpuidle: using governor menu
vm-test-run-update-hardware-configuration> target # [    0.444417] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vm-test-run-update-hardware-configuration> target # [    0.444972] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.445721] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
vm-test-run-update-hardware-configuration> target # [    0.446724] PCI: Using configuration type 1 for base access
vm-test-run-update-hardware-configuration> target # [    0.447879] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
vm-test-run-update-hardware-configuration> target # [    0.452932] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.453712] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
vm-test-run-update-hardware-configuration> target # [    0.458712] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.459711] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
vm-test-run-update-hardware-configuration> target # [    0.469379] ACPI: Added _OSI(Module Device)
vm-test-run-update-hardware-configuration> target # [    0.469713] ACPI: Added _OSI(Processor Device)
vm-test-run-update-hardware-configuration> target # [    0.470633] ACPI: Added _OSI(Processor Aggregator Device)
vm-test-run-update-hardware-configuration> target # [    0.475564] ACPI: 1 ACPI AML tables successfully acquired and loaded
vm-test-run-update-hardware-configuration> target # [    0.481721] ACPI: Interpreter enabled
vm-test-run-update-hardware-configuration> target # [    0.482520] ACPI: PM: (supports S0 S3 S4 S5)
vm-test-run-update-hardware-configuration> target # [    0.482713] ACPI: Using IOAPIC for interrupt routing
vm-test-run-update-hardware-configuration> target # [    0.484287] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
vm-test-run-update-hardware-configuration> target # [    0.484712] PCI: Using E820 reservations for host bridge windows
vm-test-run-update-hardware-configuration> target # [    0.485866] ACPI: Enabled 2 GPEs in block 00 to 3F
vm-test-run-update-hardware-configuration> target # [    0.490101] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
vm-test-run-update-hardware-configuration> target # [    0.490719] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
vm-test-run-update-hardware-configuration> target # [    0.491774] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]
vm-test-run-update-hardware-configuration> target # [    0.492807] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
vm-test-run-update-hardware-configuration> target # [    0.494156] PCI host bridge to bus 0000:00
vm-test-run-update-hardware-configuration> target # [    0.494717] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.495712] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.496712] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.497712] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.498712] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.499712] pci_bus 0000:00: root bus resource [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.500713] pci_bus 0000:00: root bus resource [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.501850] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.503406] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.506779] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
vm-test-run-update-hardware-configuration> target # [    0.507802] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
vm-test-run-update-hardware-configuration> target # [    0.508795] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
vm-test-run-update-hardware-configuration> target # [    0.510055] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
vm-test-run-update-hardware-configuration> target # [    0.511743] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.513732] pci 0000:00:02.0: BAR 0 [io  0xc180-0xc19f]
vm-test-run-update-hardware-configuration> target # [    0.514722] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
vm-test-run-update-hardware-configuration> target # [    0.515750] pci 0000:00:02.0: BAR 4 [mem 0xe0000000000-0xe0000003fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.516722] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]
vm-test-run-update-hardware-configuration> target # [    0.518749] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.520722] pci 0000:00:03.0: BAR 0 [io  0xc1a0-0xc1bf]
vm-test-run-update-hardware-configuration> target # [    0.521728] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
vm-test-run-update-hardware-configuration> target # [    0.522756] pci 0000:00:03.0: BAR 4 [mem 0xe0000004000-0xe0000007fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.524755] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.527696] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
vm-test-run-update-hardware-configuration> target # [    0.528693] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
vm-test-run-update-hardware-configuration> target # [    0.529752] pci 0000:00:04.0: BAR 4 [mem 0xe0000008000-0xe000000bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.531692] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.534723] pci 0000:00:05.0: BAR 0 [io  0xc080-0xc0ff]
vm-test-run-update-hardware-configuration> target # [    0.535723] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]
vm-test-run-update-hardware-configuration> target # [    0.536750] pci 0000:00:05.0: BAR 4 [mem 0xe000000c000-0xe000000ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.538645] pci 0000:00:06.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.540723] pci 0000:00:06.0: BAR 0 [io  0xc1c0-0xc1df]
vm-test-run-update-hardware-configuration> target # [    0.541722] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]
vm-test-run-update-hardware-configuration> target # [    0.542752] pci 0000:00:06.0: BAR 4 [mem 0xe0000010000-0xe0000013fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.543723] pci 0000:00:06.0: ROM [mem 0xfeb80000-0xfebbffff pref]
vm-test-run-update-hardware-configuration> target # [    0.545651] pci 0000:00:07.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.547712] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]
vm-test-run-update-hardware-configuration> target # [    0.548750] pci 0000:00:07.0: BAR 4 [mem 0xe0000014000-0xe0000017fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.550741] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.552705] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]
vm-test-run-update-hardware-configuration> target # [    0.553750] pci 0000:00:08.0: BAR 4 [mem 0xe0000018000-0xe000001bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.555607] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.557968] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]
vm-test-run-update-hardware-configuration> target # [    0.558766] pci 0000:00:09.0: BAR 4 [mem 0xe000001c000-0xe000001ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.561725] pci 0000:00:0a.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.564384] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]
vm-test-run-update-hardware-configuration> target # [    0.564751] pci 0000:00:0a.0: BAR 4 [mem 0xe0000020000-0xe0000023fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.566598] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.569730] pci 0000:00:0b.0: BAR 0 [io  0xc100-0xc13f]
vm-test-run-update-hardware-configuration> target # [    0.570722] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]
vm-test-run-update-hardware-configuration> target # [    0.571750] pci 0000:00:0b.0: BAR 4 [mem 0xe0000024000-0xe0000027fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.573593] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.575722] pci 0000:00:0c.0: BAR 0 [io  0xc1e0-0xc1ff]
vm-test-run-update-hardware-configuration> target # [    0.576722] pci 0000:00:0c.0: BAR 1 [mem 0xfebdb000-0xfebdbfff]
vm-test-run-update-hardware-configuration> target # [    0.577749] pci 0000:00:0c.0: BAR 4 [mem 0xe0000028000-0xe000002bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.579605] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.581445] pci 0000:00:1d.0: BAR 4 [io  0xc200-0xc21f]
vm-test-run-update-hardware-configuration> target # [    0.582007] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.583450] pci 0000:00:1d.1: BAR 4 [io  0xc220-0xc23f]
vm-test-run-update-hardware-configuration> target # [    0.584004] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.585577] pci 0000:00:1d.2: BAR 4 [io  0xc240-0xc25f]
vm-test-run-update-hardware-configuration> target # [    0.586882] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.588382] pci 0000:00:1d.7: BAR 0 [mem 0xfebdc000-0xfebdcfff]
vm-test-run-update-hardware-configuration> target # [    0.589048] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.590177] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
vm-test-run-update-hardware-configuration> target # [    0.591061] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.592675] pci 0000:00:1f.2: BAR 4 [io  0xc260-0xc27f]
vm-test-run-update-hardware-configuration> target # [    0.593549] pci 0000:00:1f.2: BAR 5 [mem 0xfebdd000-0xfebddfff]
vm-test-run-update-hardware-configuration> target # [    0.595140] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.596538] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
vm-test-run-update-hardware-configuration> target # [    0.602619] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.603795] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.604827] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.605832] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.606823] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.607827] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.608844] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.609827] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.610758] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.611737] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.612825] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.613732] ACPI: PCI: Interrupt link GSID configured for IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.614728] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
vm-test-run-update-hardware-configuration> target # [    0.615725] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
vm-test-run-update-hardware-configuration> target # [    0.616728] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
vm-test-run-update-hardware-configuration> target # [    0.617728] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
vm-test-run-update-hardware-configuration> target # [    0.619705] iommu: Default domain type: Translated
vm-test-run-update-hardware-configuration> target # [    0.620678] iommu: DMA domain TLB invalidation policy: lazy mode
vm-test-run-update-hardware-configuration> target # [    0.621918] ACPI: bus type USB registered
vm-test-run-update-hardware-configuration> target # [    0.622773] usbcore: registered new interface driver usbfs
vm-test-run-update-hardware-configuration> target # [    0.623727] usbcore: registered new interface driver hub
vm-test-run-update-hardware-configuration> target # [    0.624733] usbcore: registered new device driver usb
vm-test-run-update-hardware-configuration> target # [    0.626497] NetLabel: Initializing
vm-test-run-update-hardware-configuration> target # [    0.626718] NetLabel:  domain hash size = 128
vm-test-run-update-hardware-configuration> target # [    0.627610] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
vm-test-run-update-hardware-configuration> target # [    0.628649] NetLabel:  unlabeled traffic allowed by default
vm-test-run-update-hardware-configuration> target # [    0.629652] PCI: Using ACPI for IRQ routing
vm-test-run-update-hardware-configuration> target # [    0.705290] pci 0000:00:01.0: vgaarb: setting as boot VGA device
vm-test-run-update-hardware-configuration> target # [    0.705708] pci 0000:00:01.0: vgaarb: bridge control possible
vm-test-run-update-hardware-configuration> target # [    0.705708] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vm-test-run-update-hardware-configuration> target # [    0.705718] vgaarb: loaded
vm-test-run-update-hardware-configuration> target # [    0.706596] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
vm-test-run-update-hardware-configuration> target # [    0.707568] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
vm-test-run-update-hardware-configuration> target # [    0.711818] clocksource: Switched to clocksource kvm-clock
vm-test-run-update-hardware-configuration> target # [    0.714961] VFS: Disk quotas dquot_6.6.0
vm-test-run-update-hardware-configuration> target # [    0.715828] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
vm-test-run-update-hardware-configuration> target # [    0.717438] pnp: PnP ACPI init
vm-test-run-update-hardware-configuration> target # [    0.718331] ACPI: IRQ 4 override to edge(!), high(!)
vm-test-run-update-hardware-configuration> target # [    0.719448] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
vm-test-run-update-hardware-configuration> target # [    0.721239] pnp: PnP ACPI: found 5 devices
vm-test-run-update-hardware-configuration> target # [    0.728408] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
vm-test-run-update-hardware-configuration> target # [    0.730148] clocksource: Switched to clocksource acpi_pm
vm-test-run-update-hardware-configuration> target # [    0.731431] NET: Registered PF_INET protocol family
vm-test-run-update-hardware-configuration> target # [    0.733004] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.748596] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.750444] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.752006] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.753670] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.755242] TCP: Hash tables configured (established 32768 bind 32768)
vm-test-run-update-hardware-configuration> target # [    0.756615] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.758283] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.759746] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.761313] NET: Registered PF_UNIX/PF_LOCAL protocol family
vm-test-run-update-hardware-configuration> target # [    0.762487] NET: Registered PF_XDP protocol family
vm-test-run-update-hardware-configuration> target # [    0.763526] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.764769] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.766020] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.767401] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.768752] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.770115] pci_bus 0000:00: resource 9 [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.772215] ACPI: \_SB_.GSIA: Enabled at IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.774245] ACPI: \_SB_.GSIB: Enabled at IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.776121] ACPI: \_SB_.GSIC: Enabled at IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.778001] ACPI: \_SB_.GSID: Enabled at IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.780001] PCI: CLS 0 bytes, default 64
vm-test-run-update-hardware-configuration> target # [    0.780948] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
vm-test-run-update-hardware-configuration> target # [    0.782388] Trying to unpack rootfs image as initramfs...
vm-test-run-update-hardware-configuration> target # [    0.790222] software IO TLB: mapped [mem 0x000000007a2e3000-0x000000007e2e3000] (64MB)
vm-test-run-update-hardware-configuration> target # [    0.791911] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d51807ee, max_idle_ns: 440795380511 ns
vm-test-run-update-hardware-configuration> target # [    0.824532] Initialise system trusted keyrings
vm-test-run-update-hardware-configuration> target # [    0.828251] workingset: timestamp_bits=40 max_order=20 bucket_order=0
vm-test-run-update-hardware-configuration> target # [    0.844943] Key type asymmetric registered
vm-test-run-update-hardware-configuration> target # [    0.845839] Asymmetric key parser 'x509' registered
vm-test-run-update-hardware-configuration> target # [    0.849243] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
vm-test-run-update-hardware-configuration> target # [    0.850842] io scheduler mq-deadline registered
vm-test-run-update-hardware-configuration> target # [    0.854211] io scheduler kyber registered
vm-test-run-update-hardware-configuration> target # [    0.855541] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
vm-test-run-update-hardware-configuration> target # [    0.857068] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
vm-test-run-update-hardware-configuration> target # [    0.863050] Linux agpgart interface v0.103
vm-test-run-update-hardware-configuration> target # [    0.863974] ACPI: bus type drm_connector registered
vm-test-run-update-hardware-configuration> target # [    0.866566] usbcore: registered new interface driver usbserial_generic
vm-test-run-update-hardware-configuration> target # [    0.867870] usbserial: USB Serial support registered for generic
vm-test-run-update-hardware-configuration> target # [    0.871215] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.
vm-test-run-update-hardware-configuration> target # [    0.871215] Please enable it if your BIOS has the CPPC option.
vm-test-run-update-hardware-configuration> target # [    0.873858] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
vm-test-run-update-hardware-configuration> target # [    0.880320] drop_monitor: Initializing network drop monitor service
vm-test-run-update-hardware-configuration> target # [    0.881671] NET: Registered PF_INET6 protocol family
vm-test-run-update-hardware-configuration> target # [    0.885685] Segment Routing with IPv6
vm-test-run-update-hardware-configuration> target # [    0.889214] In-situ OAM (IOAM) with IPv6
vm-test-run-update-hardware-configuration> target # [    0.890380] IPI shorthand broadcast: enabled
vm-test-run-update-hardware-configuration> target # [    0.895832] sched_clock: Marking stable (710020526, 185172639)->(987409327, -92216162)
vm-test-run-update-hardware-configuration> target # [    0.901460] registered taskstats version 1
vm-test-run-update-hardware-configuration> target # [    0.902517] Loading compiled-in X.509 certificates
vm-test-run-update-hardware-configuration> target # [    0.920209] Demotion targets for Node 0: null
vm-test-run-update-hardware-configuration> target # [    0.921278] Key type .fscrypt registered
vm-test-run-update-hardware-configuration> target # [    0.922110] Key type fscrypt-provisioning registered
vm-test-run-update-hardware-configuration> target # [    0.925318] ima: No TPM chip found, activating TPM-bypass!
vm-test-run-update-hardware-configuration> target # [    0.926450] ima: Allocated hash algorithm: sha1
vm-test-run-update-hardware-configuration> target # [    0.929226] ima: No architecture policies found
vm-test-run-update-hardware-configuration> target # [    0.932216] PM:   Magic number: 14:535:776
vm-test-run-update-hardware-configuration> target # [    0.933808] RAS: Correctable Errors collector initialized.
vm-test-run-update-hardware-configuration> target # [    0.942015] clk: Disabling unused clocks
vm-test-run-update-hardware-configuration> target # [    0.945213] PM: genpd: Disabling unused power domains
vm-test-run-update-hardware-configuration> target # [    1.057642] Freeing initrd memory: 29620K
vm-test-run-update-hardware-configuration> target # [    1.060470] Freeing unused decrypted memory: 2028K
vm-test-run-update-hardware-configuration> target # [    1.063003] Freeing unused kernel image (initmem) memory: 3660K
vm-test-run-update-hardware-configuration> target # [    1.064310] Write protecting the kernel read-only data: 32768k
vm-test-run-update-hardware-configuration> target # [    1.065740] Freeing unused kernel image (text/rodata gap) memory: 296K
vm-test-run-update-hardware-configuration> target # [    1.067401] Freeing unused kernel image (rodata/data gap) memory: 684K
vm-test-run-update-hardware-configuration> target # [    1.099634] x86/mm: Checked W+X mappings: passed, no W+X pages found.
vm-test-run-update-hardware-configuration> target # [    1.100918] Run /init as init process
vm-test-run-update-hardware-configuration> target # [    1.109807] systemd[1]: Inserted module 'autofs4'
vm-test-run-update-hardware-configuration> target # [    1.124524] fuse: init (API version 7.45)
vm-test-run-update-hardware-configuration> target # [    1.130215] ACPI: \_SB_.GSIG: Enabled at IRQ 22
vm-test-run-update-hardware-configuration> target # [    1.132767] ACPI: \_SB_.GSIH: Enabled at IRQ 23
vm-test-run-update-hardware-configuration> target # [    1.135954] ACPI: \_SB_.GSIE: Enabled at IRQ 20
vm-test-run-update-hardware-configuration> target # [    1.138228] ACPI: \_SB_.GSIF: Enabled at IRQ 21
vm-test-run-update-hardware-configuration> target # [    1.144608] virtiofs virtio6: discovered new tag: nix-store
vm-test-run-update-hardware-configuration> target # [    1.146670] virtiofs virtio6: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.153492] virtiofs virtio7: discovered new tag: shared
vm-test-run-update-hardware-configuration> target # [    1.155453] virtiofs virtio7: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.166516] virtiofs virtio8: discovered new tag: xchg
vm-test-run-update-hardware-configuration> target # [    1.168484] virtiofs virtio8: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.187629] systemd[1]: Successfully made /usr/ read-only.
vm-test-run-update-hardware-configuration> target # [    1.524215] systemd[1]: systemd 261.3 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    1.530192] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    1.531264] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    1.532344] systemd[1]: Running in initrd.
vm-test-run-update-hardware-configuration> target # [    1.533518] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    1.534930] systemd[1]: Hostname set to <target>.
vm-test-run-update-hardware-configuration> target # [    1.589819] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    1.620021] systemd[1]: Queued start job for default target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    1.624416] systemd[1]: Created slice Slice /system/modprobe.
vm-test-run-update-hardware-configuration> target # [    1.626135] systemd[1]: Created slice Slice /system/systemd-makefs.
vm-test-run-update-hardware-configuration> target # [    1.627646] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    1.629439] systemd[1]: Expecting device /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    1.630628] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    1.631761] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    1.632923] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    1.633984] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    1.635280] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    1.636855] systemd[1]: Listening on Journal Socket (/dev/log).
vm-test-run-update-hardware-configuration> target # [    1.638363] systemd[1]: Listening on Journal Sockets.
vm-test-run-update-hardware-configuration> target # [    1.639646] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    1.640969] systemd[1]: Listening on udev Kernel Socket.
vm-test-run-update-hardware-configuration> target # [    1.642249] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    1.644260] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    1.649004] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    1.658432] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    1.667269] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    1.670440] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    1.675918] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    1.691599] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    1.698997] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    1.701853] systemd-journald[65]: Collecting audit messages is disabled.
vm-test-run-update-hardware-configuration> target # [    1.708785] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    1.714889] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config
vm-test-run-update-hardware-configuration> target # [    1.718354] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
vm-test-run-update-hardware-configuration> target # [    1.729384] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
vm-test-run-update-hardware-configuration> target # [    1.733514] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    1.765995] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    1.778440] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    1.793788] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    1.805367] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    1.820617] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    1.832908] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    1.838493] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    1.844286] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    1.850377] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    1.869331] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    1.686259] systemd-modules-load[66]: Inserted module 'dm_mod'
vm-test-run-update-hardware-configuration> target # [    1.691087] systemd-modules-load[66]: Inserted module 'virtio_balloon'
vm-test-run-update-hardware-configuration> target # [    1.692487] systemd-modules-load[66]: Inserted module 'virtio_gpu'
vm-test-run-update-hardware-configuration> target # [    1.698080] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    1.728354] systemd-udevd[73]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    1.737816] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    1.757422] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    1.775167] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    1.777152] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    1.778210] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    2.197276] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
vm-test-run-update-hardware-configuration> target # [    2.210296] virtio_blk virtio2: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.216199] ehci-pci 0000:00:1d.7: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.217028] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
vm-test-run-update-hardware-configuration> target # [    2.219318] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdc000
vm-test-run-update-hardware-configuration> target # [    2.226784] serio: i8042 KBD port at 0x60,0x64 irq 1
vm-test-run-update-hardware-configuration> target # [    2.227609] serio: i8042 AUX port at 0x60,0x64 irq 12
vm-test-run-update-hardware-configuration> target # [    2.228644] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
vm-test-run-update-hardware-configuration> target # [    2.230081] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.233195] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.235228] usb usb1: Product: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.235991] usb usb1: Manufacturer: Linux 6.18.56 ehci_hcd
vm-test-run-update-hardware-configuration> target # [    2.238437] virtio_blk virtio2: [vda] 16777216 512-byte logical blocks (8.59 GB/8.00 GiB)
vm-test-run-update-hardware-configuration> target # [    2.239697] usb usb1: SerialNumber: 0000:00:1d.7
vm-test-run-update-hardware-configuration> target # [    2.240947] hub 1-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.242281] hub 1-0:1.0: 6 ports detected
vm-test-run-update-hardware-configuration> target # [    2.257999] SCSI subsystem initialized
vm-test-run-update-hardware-configuration> target # [    2.262509] uhci_hcd 0000:00:1d.0: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.268362] virtio_blk virtio3: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.272716] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
vm-test-run-update-hardware-configuration> target # [    2.277380] virtio_blk virtio3: [vdb] 1048576 512-byte logical blocks (537 MB/512 MiB)
vm-test-run-update-hardware-configuration> target # [    2.287671] uhci_hcd 0000:00:1d.0: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.297314] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200
vm-test-run-update-hardware-configuration> target # [    2.122396] (udev-worker)[101]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.311227] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.312517] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.314976] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
vm-test-run-update-hardware-configuration> target # [    2.136380] (udev-worker)[96]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.142321] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    2.346606] usb usb2: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.177504] systemd-vconsole-setup[106]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [    2.181665] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    2.368407] usb usb2: Manufacturer: Linux 6.18.56 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.375428] usb usb2: SerialNumber: 0000:00:1d.0
vm-test-run-update-hardware-configuration> target # [    2.380423] hub 2-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.383202] hub 2-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.393502] uhci_hcd 0000:00:1d.1: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.394388] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
vm-test-run-update-hardware-configuration> target # [    2.213825] systemd[1]: Found device /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.215257] systemd[1]: Reached target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    2.220076] systemd[1]: Starting Make File System on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.406451] uhci_hcd 0000:00:1d.1: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.416405] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220
vm-test-run-update-hardware-configuration> target # [    2.421708] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.425228] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.427226] usb usb3: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.428036] usb usb3: Manufacturer: Linux 6.18.56 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.430384] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
vm-test-run-update-hardware-configuration> target # [    2.431679] usb usb3: SerialNumber: 0000:00:1d.1
vm-test-run-update-hardware-configuration> target # [    2.251241] systemd-makefs[110]: Formatting /dev/vdb as ext4
vm-test-run-update-hardware-configuration> target # [    2.438967] hub 3-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.440044] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
vm-test-run-update-hardware-configuration> target # [    2.441705] hub 3-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.442692] ahci 0000:00:1f.2: flags: 64bit ncq only
vm-test-run-update-hardware-configuration> target # [    2.445893] uhci_hcd 0000:00:1d.2: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.446731] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
vm-test-run-update-hardware-configuration> target # [    2.449685] scsi host0: ahci
vm-test-run-update-hardware-configuration> target # [    2.451485] scsi host1: ahci
vm-test-run-update-hardware-configuration> target # [    2.453259] uhci_hcd 0000:00:1d.2: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.454141] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240
vm-test-run-update-hardware-configuration> target # [    2.455528] scsi host2: ahci
vm-test-run-update-hardware-configuration> target # [    2.457369] scsi host3: ahci
vm-test-run-update-hardware-configuration> target # [    2.458419] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.459678] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.461832] scsi host4: ahci
vm-test-run-update-hardware-configuration> target # [    2.463689] scsi host5: ahci
vm-test-run-update-hardware-configuration> target # [    2.465051] ata1: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd100 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.467908] usb usb4: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.469297] ata2: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd180 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.470631] usb usb4: Manufacturer: Linux 6.18.56 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.471597] usb usb4: SerialNumber: 0000:00:1d.2
vm-test-run-update-hardware-configuration> target # [    2.472468] ata3: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd200 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.474031] hub 4-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.475057] hub 4-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.476420] ata4: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd280 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.484090] ata5: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd300 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.485394] usb 1-1: new high-speed USB device number 2 using ehci-pci
vm-test-run-update-hardware-configuration> target # [    2.491301] ata6: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd380 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.346910] systemd-makefs[110]: /dev/vdb successfully formatted as ext4 (label "vdb", uuid 079bb22a-81a8-4ec8-aa1a-4e3d11023c93)
vm-test-run-update-hardware-configuration> target # [    2.351162] systemd[1]: Finished Make File System on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.353892] systemd[1]: Starting File System Check on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.384417] systemd-fsck[139]: vdb: clean, 12/32768 files, 6385/131072 blocks
vm-test-run-update-hardware-configuration> target # [    2.390782] systemd[1]: Finished File System Check on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.615088] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
vm-test-run-update-hardware-configuration> target # [    2.616658] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
vm-test-run-update-hardware-configuration> target # [    2.618446] usb 1-1: Product: QEMU USB Tablet
vm-test-run-update-hardware-configuration> target # [    2.619440] usb 1-1: Manufacturer: QEMU
vm-test-run-update-hardware-configuration> target # [    2.620348] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1
vm-test-run-update-hardware-configuration> target # [    2.635724] hid: raw HID events driver (C) Jiri Kosina
vm-test-run-update-hardware-configuration> target # [    2.503094] systemd[1]: Mounting /sysroot...
vm-test-run-update-hardware-configuration> target # [    2.803805] ata2: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.805015] ata4: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.806254] ata5: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.807481] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.808708] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
vm-test-run-update-hardware-configuration> target # [    2.810362] ata3.00: applying bridge limits
vm-test-run-update-hardware-configuration> target # [    2.811408] ata3.00: configured for UDMA/100
vm-test-run-update-hardware-configuration> target # [    2.812556] ata6: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.813863] ata1: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.815512] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
vm-test-run-update-hardware-configuration> target # [    2.873839] usbcore: registered new interface driver usbhid
vm-test-run-update-hardware-configuration> target # [    2.874720] usbhid: USB HID core driver
vm-test-run-update-hardware-configuration> target # [    2.894702] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2
vm-test-run-update-hardware-configuration> target # [    2.898759] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
vm-test-run-update-hardware-configuration> target # [    2.901815] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
vm-test-run-update-hardware-configuration> target # [    2.912125] EXT4-fs (vdb): mounted filesystem 079bb22a-81a8-4ec8-aa1a-4e3d11023c93 r/w with ordered data mode. Quota mode: none.
vm-test-run-update-hardware-configuration> target # [    2.730799] systemd[1]: Mounted /sysroot.
vm-test-run-update-hardware-configuration> target # [    2.733882] systemd[1]: Reached target Initrd Root File System.
vm-test-run-update-hardware-configuration> target # [    2.736658] systemd[1]: Starting Mountpoints Configured in the Real Root...
vm-test-run-update-hardware-configuration> target # [    2.756192] systemd-sysroot-fstab-check[148]: /sysroot should be mounted in the initrd, will request daemon-reload.
vm-test-run-update-hardware-configuration> target # [    2.758394] systemd[1]: Reload requested from client PID 148 ('systemd-sysroot') (unit initrd-parse-etc.service)...
vm-test-run-update-hardware-configuration> target # [    2.761176] systemd[1]: Reloading...
vm-test-run-update-hardware-configuration> target # [    2.948454] cdrom: Uniform CD-ROM driver Revision: 3.20
vm-test-run-update-hardware-configuration> target # [    2.835746] systemd[1]: Reloading finished in 75 ms.
vm-test-run-update-hardware-configuration> target # [    2.846931] systemd-sysroot-fstab-check[148]: Requesting initrd-fs.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    2.855206] systemd-sysroot-fstab-check[148]: Requesting swap.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    2.858602] systemd[1]: initrd-parse-etc.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    2.860429] systemd[1]: Finished Mountpoints Configured in the Real Root.
vm-test-run-update-hardware-configuration> target # [    2.862395] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.
vm-test-run-update-hardware-configuration> target # [    3.518897] systemd[1]: Mounting /sysroot/nix/.ro-store...
vm-test-run-update-hardware-configuration> target # [    3.523109] systemd[1]: Mounting /sysroot/nix/.rw-store...
vm-test-run-update-hardware-configuration> target # [    3.530129] systemd[1]: Mounting /sysroot/run...
vm-test-run-update-hardware-configuration> target # [    3.535936] systemd[1]: Mounting /sysroot/tmp/shared...
vm-test-run-update-hardware-configuration> target # [    3.543888] systemd[1]: Mounting /sysroot/tmp/xchg...
vm-test-run-update-hardware-configuration> target # [    3.593343] systemd[1]: Mounted /sysroot/nix/.ro-store.
vm-test-run-update-hardware-configuration> target # [    3.595309] systemd[1]: Mounted /sysroot/nix/.rw-store.
vm-test-run-update-hardware-configuration> target # [    3.597428] systemd[1]: Mounted /sysroot/run.
vm-test-run-update-hardware-configuration> target # [    3.605245] systemd[1]: Mounted /sysroot/tmp/shared.
vm-test-run-update-hardware-configuration> target # [    3.606787] systemd[1]: Mounted /sysroot/tmp/xchg.
vm-test-run-update-hardware-configuration> target # [    3.611509] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    3.623204] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.625445] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    3.627885] systemd[1]: Mounting /sysroot/nix/store...
vm-test-run-update-hardware-configuration> target # [    3.650855] systemd[1]: Mounted /sysroot/nix/store.
vm-test-run-update-hardware-configuration> target # [    3.652389] systemd[1]: Reached target Initrd File Systems.
vm-test-run-update-hardware-configuration> target # [    3.654429] systemd[1]: Starting Find NixOS closure...
vm-test-run-update-hardware-configuration> target # [    3.657337] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...
vm-test-run-update-hardware-configuration> target # [    3.678110] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.683911] systemd[1]: Finished Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    3.685596] systemd[1]: Reached target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    3.687669] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...
vm-test-run-update-hardware-configuration> target # [    3.701044] systemd[1]: Stopped target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    3.702696] systemd[1]: Stopped target Basic System.
vm-test-run-update-hardware-configuration> target # [    3.705302] systemd[1]: Stopped target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    3.709156] systemd[1]: Stopped target Path Units.
vm-test-run-update-hardware-configuration> target # [    3.710144] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.711435] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    3.712913] systemd[1]: Stopped target Slice Units.
vm-test-run-update-hardware-configuration> target # [    3.713867] systemd[1]: Stopped target Socket Units.
vm-test-run-update-hardware-configuration> target # [    3.714808] systemd[1]: Stopped target System Initialization.
vm-test-run-update-hardware-configuration> target # [    3.716161] systemd[1]: Stopped target Swaps.
vm-test-run-update-hardware-configuration> target # [    3.717984] systemd[1]: Stopped target Timer Units.
vm-test-run-update-hardware-configuration> target # [    3.718931] systemd[1]: dbus.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.720072] systemd[1]: Closed D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    3.721131] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.722589] systemd[1]: Stopped Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    3.723845] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    3.725158] systemd[1]: systemd-sysctl.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.727167] systemd[1]: Stopped Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    3.728356] systemd[1]: systemd-modules-load.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.729800] systemd[1]: Stopped Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    3.731184] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.733145] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.734563] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.737121] systemd[1]: Stopped Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    3.738241] systemd[1]: Stopped target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    3.739228] systemd[1]: Stopped target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    3.740391] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.741837] systemd[1]: Stopped Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    3.744117] systemd[1]: Stopping Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    3.745680] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.747397] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    3.755414] systemd[1]: initrd-cleanup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.760164] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.
vm-test-run-update-hardware-configuration> target # [    3.767048] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.769827] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    3.771459] systemd[1]: systemd-udevd.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.773316] systemd[1]: Stopped Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    3.775520] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.776850] systemd[1]: Closed udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    3.778678] systemd[1]: Starting Cleanup udev Database...
vm-test-run-update-hardware-configuration> target # [    3.779736] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.782153] systemd[1]: Stopped Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    3.783349] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.784774] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    3.786159] systemd[1]: kmod-static-nodes.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.787750] systemd[1]: Stopped Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    3.801483] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.803282] systemd[1]: Finished Cleanup udev Database.
vm-test-run-update-hardware-configuration> target # [    3.804854] systemd[1]: Reached target Switch Root.
vm-test-run-update-hardware-configuration> target # [    3.806667] systemd[1]: Starting NixOS Activation...
vm-test-run-update-hardware-configuration> target # [    3.861371] initrd-nixos-activation-start[201]: booting system configuration /nix/store/4knrinnlra2bn3vs9475y93vwsdzlkg3-nixos-system-target-test
vm-test-run-update-hardware-configuration> target # [    3.884304] initrd-nixos-activation-start[201]: running activation script...
vm-test-run-update-hardware-configuration> target # [    4.054888] initrd-nixos-activation-start[224]: setting up /etc...
vm-test-run-update-hardware-configuration> target # [    4.141367] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.143314] systemd[1]: Finished NixOS Activation.
vm-test-run-update-hardware-configuration> target # [    4.145375] systemd[1]: Starting Switch Root...
vm-test-run-update-hardware-configuration> target # [    4.155770] systemd[1]: Switching root.
vm-test-run-update-hardware-configuration> target # [    4.464055] systemd-journald[65]: Received SIGTERM from PID 1 (systemd).
vm-test-run-update-hardware-configuration> target: waiting for TCP port 22 on localhost
vm-test-run-update-hardware-configuration> target: waiting for the VM to finish booting
vm-test-run-update-hardware-configuration> target # [    8.875523] NET: Registered PF_VSOCK protocol family
vm-test-run-update-hardware-configuration> target # [    9.227437] systemd[1]: systemd 261.3 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    9.232030] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    9.232848] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    9.233740] systemd[1]: Detected first boot.
vm-test-run-update-hardware-configuration> target # [    9.235254] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    9.319082] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    9.370995] systemd[1]: Applying preset policy.
vm-test-run-update-hardware-configuration> target # [    9.502695] systemd[1]: Populated /etc with preset unit settings.
vm-test-run-update-hardware-configuration> target # [    9.677405] systemd[1]: initrd-switch-root.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.679075] systemd[1]: Stopped initrd-switch-root.service.
vm-test-run-update-hardware-configuration> target # [    9.681702] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
vm-test-run-update-hardware-configuration> target # [    9.683769] systemd[1]: Created slice Slice /system/getty.
vm-test-run-update-hardware-configuration> target # [    9.685292] systemd[1]: Created slice User and Session Slice.
vm-test-run-update-hardware-configuration> target # [    9.686424] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    9.688227] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
vm-test-run-update-hardware-configuration> target # [    9.689564] systemd[1]: Expecting device /dev/hvc0...
vm-test-run-update-hardware-configuration> target # [    9.690495] systemd[1]: Expecting device /dev/ttyS0...
vm-test-run-update-hardware-configuration> target # [    9.691504] systemd[1]: Reached target Local Encrypted Volumes.
vm-test-run-update-hardware-configuration> target # [    9.692593] systemd[1]: Stopped target initrd-fs.target.
vm-test-run-update-hardware-configuration> target # [    9.693570] systemd[1]: Stopped target initrd-root-fs.target.
vm-test-run-update-hardware-configuration> target # [    9.694599] systemd[1]: Stopped target initrd-switch-root.target.
vm-test-run-update-hardware-configuration> target # [    9.695701] systemd[1]: Reached target Virtual Machines and Containers.
vm-test-run-update-hardware-configuration> target # [    9.696871] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    9.697808] systemd[1]: Reached target Remote File Systems.
vm-test-run-update-hardware-configuration> target # [    9.698778] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    9.699671] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    9.701426] systemd[1]: Listening on Query the User Interactively for a Password.
vm-test-run-update-hardware-configuration> target # [    9.703928] systemd[1]: Listening on Process Core Dump Socket.
vm-test-run-update-hardware-configuration> target # [    9.706185] systemd[1]: Listening on Credential Encryption/Decryption.
vm-test-run-update-hardware-configuration> target # [    9.708134] systemd[1]: Listening on Factory Reset Management.
vm-test-run-update-hardware-configuration> target # [    9.709300] systemd[1]: Listening on Hostname Service Socket.
vm-test-run-update-hardware-configuration> target # [    9.712093] systemd[1]: Starting Journal Log Access Socket...
vm-test-run-update-hardware-configuration> target # [    9.713735] systemd[1]: Listening on Journal Audit Socket.
vm-test-run-update-hardware-configuration> target # [    9.716312] systemd[1]: Listening on Console Output Muting Service Socket.
vm-test-run-update-hardware-configuration> target # [    9.717645] systemd[1]: Listening on Network Management Metrics Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    9.719147] systemd[1]: Listening on Network Management Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    9.720406] systemd[1]: Listening on Network Management Netlink Socket.
vm-test-run-update-hardware-configuration> target # [    9.721651] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
vm-test-run-update-hardware-configuration> target # [    9.722911] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    9.724419] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
vm-test-run-update-hardware-configuration> target # [    9.728244] systemd[1]: Listening on Disk Repartitioning Service Socket.
vm-test-run-update-hardware-configuration> target # [    9.729477] systemd[1]: Listening on Resolve Monitor Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    9.730637] systemd[1]: Listening on Resolve Service Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    9.731800] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    9.732828] systemd[1]: Listening on udev Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    9.735084] systemd[1]: Mounting Huge Pages File System...
vm-test-run-update-hardware-configuration> target # [    9.738362] systemd[1]: Mounting POSIX Message Queue File System...
vm-test-run-update-hardware-configuration> target # [    9.745082] systemd[1]: Mounting Kernel Debug File System...
vm-test-run-update-hardware-configuration> target # [    9.752439] systemd[1]: Mounting Kernel Trace File System...
vm-test-run-update-hardware-configuration> target # [    9.761792] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    9.774663] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    9.781211] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
vm-test-run-update-hardware-configuration> target # [    9.785624] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore
vm-test-run-update-hardware-configuration> target # [    9.787937] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [    9.800054] systemd[1]: Mounting FUSE Control File System...
vm-test-run-update-hardware-configuration> target # [    9.801657] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
vm-test-run-update-hardware-configuration> target # [    9.810945] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    9.817687] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    9.823574] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...
vm-test-run-update-hardware-configuration> target # [    9.835279] systemd[1]: Starting Remount Root and Kernel File Systems...
vm-test-run-update-hardware-configuration> target # [    9.839266] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    9.848623] systemd-journald[294]: Collecting audit messages is enabled.
vm-test-run-update-hardware-configuration> target # [    9.852745] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    9.862582] systemd[1]: Listening on Journal Log Access Socket.
vm-test-run-update-hardware-configuration> target # [    9.871639] systemd[1]: Mounted Huge Pages File System.
vm-test-run-update-hardware-configuration> target # [    9.877499] loop: module loaded
vm-test-run-update-hardware-configuration> target # [    9.879332] systemd[1]: Mounted POSIX Message Queue File System.
vm-test-run-update-hardware-configuration> target # [    9.884361] systemd[1]: Mounted Kernel Debug File System.
vm-test-run-update-hardware-configuration> target # [    9.887191] systemd[1]: Mounted Kernel Trace File System.
vm-test-run-update-hardware-configuration> target # [    9.899332] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    9.717482] systemd[1]: Queued start job for default target Multi-User System.
vm-test-run-update-hardware-configuration> target # [    9.720494] systemd[1]: Unnecessary job was removed for /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    9.908355] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    9.724572] systemd[1]: systemd-journald.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.727834] systemd-modules-load[295]: Inserted module 'loop'
vm-test-run-update-hardware-configuration> target # [    9.731399] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.735555] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    9.921671] EXT4-fs (vdb): re-mounted 079bb22a-81a8-4ec8-aa1a-4e3d11023c93.
vm-test-run-update-hardware-configuration> target # [    9.738393] systemd[1]: Mounted FUSE Control File System.
vm-test-run-update-hardware-configuration> target # [    9.743124] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    9.750241] systemd[1]: Finished Remount Root and Kernel File Systems.
vm-test-run-update-hardware-configuration> target # [    9.758843] systemd[1]: Listening on Disk Image Download Service Socket.
vm-test-run-update-hardware-configuration> target # [    9.762610] systemd[1]: Mounting Kernel Configuration File System...
vm-test-run-update-hardware-configuration> target # [    9.766092] systemd[1]: Starting Firewall...
vm-test-run-update-hardware-configuration> target # [    9.770580] systemd[1]: Starting Flush Journal to Persistent Storage...
vm-test-run-update-hardware-configuration> target # [    9.771779] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore
vm-test-run-update-hardware-configuration> target # [    9.773848] systemd-oomd[297]: No swap; memory pressure usage will be degraded
vm-test-run-update-hardware-configuration> target # [    9.781844] systemd[1]: Starting Load/Save OS Random Seed...
vm-test-run-update-hardware-configuration> target # [    9.797110] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    9.810971] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    9.812356] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    9.815043] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.
vm-test-run-update-hardware-configuration> target # [   10.037309] systemd-journald[294]: Received client request to flush runtime journal.
vm-test-run-update-hardware-configuration> target # [   10.034895] systemd[1]: Mounted Kernel Configuration File System.
vm-test-run-update-hardware-configuration> target # [   10.037548] systemd[1]: Finished Load/Save OS Random Seed.
vm-test-run-update-hardware-configuration> target # [   10.042272] systemd[1]: Reached target First Boot Complete.
vm-test-run-update-hardware-configuration> target # [   10.046592] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [   10.047605] systemd[1]: Starting Network Name Resolution...
vm-test-run-update-hardware-configuration> target # [   10.048648] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [   10.051246] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [   10.052385] systemd[1]: Finished Flush Journal to Persistent Storage.
vm-test-run-update-hardware-configuration> target # [   10.070225] systemd-resolved[324]: Positive Trust Anchors:
vm-test-run-update-hardware-configuration> target # [   10.072894] systemd-resolved[324]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
vm-test-run-update-hardware-configuration> target # [   10.077216] systemd-resolved[324]: . IN DS 38696 8 2 683d2d0acb8c9b712a1948b27f741219298d0a450d612c483af444a4c0fb2b16
vm-test-run-update-hardware-configuration> target # [   10.078903] systemd-resolved[324]: Negative trust anchors: home.arpa 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 170.0.0.192.in-addr.arpa 171.0.0.192.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa ipv4only.arpa resolver.arpa corp home internal intranet lan local private test
vm-test-run-update-hardware-configuration> target # [   10.105339] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [   10.106973] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [   10.113708] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [   10.142193] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [   10.151113] systemd-resolved[324]: Using system hostname 'target'.
vm-test-run-update-hardware-configuration> target # [   10.155383] systemd[1]: Started Network Name Resolution.
vm-test-run-update-hardware-configuration> target # [   10.176293] systemd-udevd[338]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [   10.216669] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [   10.334287] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [   10.404506] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.
vm-test-run-update-hardware-configuration> target # [   10.454871] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.
vm-test-run-update-hardware-configuration> target # [   10.460979] (udev-worker)[370]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [   10.466055] (udev-worker)[363]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [   10.497310] systemd[1]: Mounting /run/wrappers...
vm-test-run-update-hardware-configuration> target # [   10.531456] systemd[1]: Mounted /run/wrappers.
vm-test-run-update-hardware-configuration> target # [   10.532427] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [   10.535241] systemd[1]: Listening on Boot Loader Control Service Socket.
vm-test-run-update-hardware-configuration> target # [   10.539121] systemd[1]: Starting register-nix-paths.service...
vm-test-run-update-hardware-configuration> target # [   10.543074] systemd[1]: Starting Create SUID/SGID Wrappers...
vm-test-run-update-hardware-configuration> target # [   10.544101] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.
vm-test-run-update-hardware-configuration> target # [   10.548394] systemd[1]: Starting Save Transient machine-id to Disk...
vm-test-run-update-hardware-configuration> target # [   10.564638] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [   10.692239] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [   10.707322] systemd[1]: Starting Rebuild Journal Catalog...
vm-test-run-update-hardware-configuration> target # [   10.713174] systemd[1]: Starting Record System Boot/Shutdown in UTMP...
vm-test-run-update-hardware-configuration> target # [   10.789112] systemd[1]: Finished Record System Boot/Shutdown in UTMP.
vm-test-run-update-hardware-configuration> target # [   10.838138] systemd[1]: Finished Rebuild Journal Catalog.
vm-test-run-update-hardware-configuration> target # [   10.848126] systemd[1]: Starting Update is Completed...
vm-test-run-update-hardware-configuration> target # [   10.911410] systemd[1]: Finished Update is Completed.
vm-test-run-update-hardware-configuration> target # [   11.100732] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console
vm-test-run-update-hardware-configuration> target # [   10.962169] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   10.967470] systemd[1]: Finished Save Transient machine-id to Disk.
vm-test-run-update-hardware-configuration> target # [   11.025691] systemd[1]: Finished Firewall.
vm-test-run-update-hardware-configuration> target # [   11.026699] systemd[1]: Reached target Preparation for Network.
vm-test-run-update-hardware-configuration> target # [   11.031501] systemd[1]: Listening on Network Management Resolve Hook Socket.
vm-test-run-update-hardware-configuration> target # [   11.037881] systemd[1]: Starting Network Management...
vm-test-run-update-hardware-configuration> target # [   11.121174] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
vm-test-run-update-hardware-configuration> target # [   11.167672] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
vm-test-run-update-hardware-configuration> target # [   11.146503] systemd[1]: Finished register-nix-paths.service.
vm-test-run-update-hardware-configuration> target # [   11.151055] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   11.153199] systemd[1]: Finished Create SUID/SGID Wrappers.
vm-test-run-update-hardware-configuration> target # [   11.154300] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [   11.157766] systemd[1]: Started Discard unused filesystem blocks once a week.
vm-test-run-update-hardware-configuration> target # [   11.159076] systemd[1]: Started Daily Cleanup of Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   11.161221] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [   11.162192] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   11.163696] systemd[1]: Listening on Nix Daemon Socket.
vm-test-run-update-hardware-configuration> target # [   11.167688] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).
vm-test-run-update-hardware-configuration> target # [   11.171264] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.
vm-test-run-update-hardware-configuration> target # [   11.173396] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [   11.174353] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   11.175933] systemd[1]: Started backdoor.service.
vm-test-run-update-hardware-configuration> target # [   11.177882] systemd[1]: Starting Import lastlog data into lastlog2 database...
vm-test-run-update-hardware-configuration> target # [   11.185579] systemd[1]: Starting Name Service Cache Daemon (nsncd)...
vm-test-run-update-hardware-configuration> target # [   11.200087] systemd[1]: Starting Post-Boot Actions...
vm-test-run-update-hardware-configuration> target # [   11.209757] systemd[1]: Started Reset console on configuration changes.
vm-test-run-update-hardware-configuration> target # [   11.229178] systemd[1]: Starting SSH Host Keys Generation...
vm-test-run-update-hardware-configuration> target # [   11.272685] systemd[1]: Starting D-Bus System Message Bus...
vm-test-run-update-hardware-configuration> target # [   11.281254] nsncd[529]: Oct 19 08:47:39.275 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"
vm-test-run-update-hardware-configuration> target # [   11.290178] systemd[1]: Started Name Service Cache Daemon (nsncd).
vm-test-run-update-hardware-configuration> target # [   11.295330] systemd[1]: Reached target Host and Network Name Lookups.
vm-test-run-update-hardware-configuration> target # [   11.296591] systemd[1]: Reached target User and Group Name Lookups.
vm-test-run-update-hardware-configuration> target # connecting to host...
vm-test-run-update-hardware-configuration> target: Guest shell says: b'Spawning backdoor root shell...\n'
vm-test-run-update-hardware-configuration> target: connected to guest root shell
vm-test-run-update-hardware-configuration> target: (connecting took 6.00 seconds)
vm-test-run-update-hardware-configuration> target: (finished: waiting for the VM to finish booting, in 6.00 seconds)
vm-test-run-update-hardware-configuration> target # [   11.359555] systemd[1]: Starting User Login Management...
vm-test-run-update-hardware-configuration> target # [   11.370226] systemd[1]: Finished Post-Boot Actions.
vm-test-run-update-hardware-configuration> target # [   11.374043] systemd-resolved[324]: Clock change detected. Flushing caches.
vm-test-run-update-hardware-configuration> target # [   11.171127] ACPI: button: Power Button [PWRF]
vm-test-run-update-hardware-configuration> target # [   11.183784] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:07.0/virtio5/input/input4
vm-test-run-update-hardware-configuration> target # [   11.273725] mousedev: PS/2 mouse device common for all mice
vm-test-run-update-hardware-configuration> target # [   11.395032] systemd[1]: Finished Import lastlog data into lastlog2 database.
vm-test-run-update-hardware-configuration> target # [   11.441564] dbus-broker-launch[537]: Looking up NSS user entry for 'systemd-timesync'...
vm-test-run-update-hardware-configuration> target # [   11.452807] dbus-broker-launch[537]: NSS returned no entry for 'systemd-timesync'
vm-test-run-update-hardware-configuration> target # [   11.454282] dbus-broker-launch[537]: Invalid user-name in /nix/store/5c4ly9c8g4jqzlljnhpsria7qpf4g13x-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"
vm-test-run-update-hardware-configuration> target # [   11.329205] Console: switching to colour dummy device 80x25
vm-test-run-update-hardware-configuration> target # [   11.426019] rtc_cmos PNP0B00:00: RTC can wake from S4
vm-test-run-update-hardware-configuration> target # [   11.557692] cfg80211: Loading compiled-in X.509 certificates for regulatory database
vm-test-run-update-hardware-configuration> target # [   11.470877] systemd-networkd[511]: lo: Link UP
vm-test-run-update-hardware-configuration> target # [   11.471859] systemd-networkd[511]: lo: Gained carrier
vm-test-run-update-hardware-configuration> target # [   11.482144] systemd-networkd[511]: eth0: Configuring with /etc/systemd/network/99-ethernet-default-dhcp.network.
vm-test-run-update-hardware-configuration> target # [   11.483785] systemd[1]: Started Network Management.
vm-test-run-update-hardware-configuration> target # [   11.484689] systemd[1]: Reached target Network.
vm-test-run-update-hardware-configuration> target # [   11.490228] systemd[1]: Starting Enable Persistent Storage in systemd-networkd...
vm-test-run-update-hardware-configuration> target # [   11.502469] systemd-networkd[511]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [   11.504967] systemd[1]: Starting Permit User Sessions...
vm-test-run-update-hardware-configuration> target # [   11.507809] systemd-networkd[511]: eth1: Configuring with /etc/systemd/network/40-eth1.network.
vm-test-run-update-hardware-configuration> target # [   11.509252] systemd-networkd[511]: eth0: Link UP
vm-test-run-update-hardware-configuration> target # [   11.519111] systemd-networkd[511]: eth0: Gained carrier
vm-test-run-update-hardware-configuration> target # [   11.529727] systemd[1]: Started D-Bus System Message Bus.
vm-test-run-update-hardware-configuration> target # [   11.558553] rtc_cmos PNP0B00:00: registered as rtc0
vm-test-run-update-hardware-configuration> target # [   11.558651] rtc_cmos PNP0B00:00: setting system clock to 2026-10-19T08:47:39 UTC (1792399659)
vm-test-run-update-hardware-configuration> target # [   11.558745] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
vm-test-run-update-hardware-configuration> target # [   11.595383] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
vm-test-run-update-hardware-configuration> target # [   11.595471] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
vm-test-run-update-hardware-configuration> target # [   11.596584] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
vm-test-run-update-hardware-configuration> target # [   11.596590] cfg80211: failed to load regulatory.db
vm-test-run-update-hardware-configuration> target # [   11.632683] parport_pc 00:02: reported by Plug and Play ACPI
vm-test-run-update-hardware-configuration> target # [   11.632775] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
vm-test-run-update-hardware-configuration> target # [   11.755703] NET: Registered PF_PACKET protocol family
vm-test-run-update-hardware-configuration> target # [   11.803774] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
vm-test-run-update-hardware-configuration> target # [   11.803888] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
vm-test-run-update-hardware-configuration> target # [   11.834564] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6
vm-test-run-update-hardware-configuration> target # [   11.834842] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5
vm-test-run-update-hardware-configuration> target # [   11.577341] dbus-broker-launch[537]: Ready
vm-test-run-update-hardware-configuration> target # [   11.803720] systemd-networkd[511]: eth1: Link UP
vm-test-run-update-hardware-configuration> target # [   11.808281] systemd-networkd[511]: eth1: Gained carrier
vm-test-run-update-hardware-configuration> target # [   11.809296] systemd-networkd[511]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [   11.811933] systemd-networkd[511]: eth0: DHCPv4 address 10.0.2.15/24, gateway 10.0.2.2 acquired from 10.0.2.2
vm-test-run-update-hardware-configuration> target # [   11.815728] systemd[1]: Finished Permit User Sessions.
vm-test-run-update-hardware-configuration> target # [   11.816994] systemd-logind[555]: New seat seat0.
vm-test-run-update-hardware-configuration> target # [   11.820984] systemd[1]: Started Getty on tty1.
vm-test-run-update-hardware-configuration> target # [   11.821845] systemd[1]: Reached target Login Prompts.
vm-test-run-update-hardware-configuration> target # [   11.822788] systemd[1]: Started User Login Management.
vm-test-run-update-hardware-configuration> target # [   11.827084] systemd[1]: Finished Enable Persistent Storage in systemd-networkd.
vm-test-run-update-hardware-configuration> target # [   11.846188] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
vm-test-run-update-hardware-configuration> target # [   11.852113] systemd[1]: Starting linger-users.service...
vm-test-run-update-hardware-configuration> target # [   11.855471] systemd-logind[555]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)
vm-test-run-update-hardware-configuration> target # [   11.858669] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   11.862755] systemd-logind[555]: Watching system buttons on /dev/input/event2 (Power Button)
vm-test-run-update-hardware-configuration> target # [   12.062516] [drm] Found bochs VGA, ID 0xb0c5.
vm-test-run-update-hardware-configuration> target # [   12.063039] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
vm-test-run-update-hardware-configuration> target # [   12.071002] iTCO_wdt iTCO_wdt.0.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
vm-test-run-update-hardware-configuration> target # [   11.892347] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   11.897385] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   11.902593] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   11.932754] systemd-logind[555]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)
vm-test-run-update-hardware-configuration> target # [   11.941378] systemd[1]: linger-users.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   11.946350] systemd[1]: Finished linger-users.service.
vm-test-run-update-hardware-configuration> target # [   12.149171] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic
vm-test-run-update-hardware-configuration> target # [   12.149989] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0
vm-test-run-update-hardware-configuration> target # [   12.161592] iTCO_wdt iTCO_wdt.0.auto: initialized. heartbeat=30 sec (nowayout=0)
vm-test-run-update-hardware-configuration> target # [   12.168143] ppdev: user-space parallel port driver
vm-test-run-update-hardware-configuration> target # [   12.269631] Console: switching to colour frame buffer device 160x50
vm-test-run-update-hardware-configuration> target # [   12.282206] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device
vm-test-run-update-hardware-configuration> target # [   12.120945] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   12.122720] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   12.132864] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   12.425022] kvm_amd: TSC scaling supported
vm-test-run-update-hardware-configuration> target # [   12.425545] kvm_amd: Nested Virtualization enabled
vm-test-run-update-hardware-configuration> target # [   12.429126] kvm_amd: Nested Paging enabled
vm-test-run-update-hardware-configuration> target # [   12.429609] kvm_amd: LBR virtualization supported
vm-test-run-update-hardware-configuration> target # [   12.431169] kvm_amd: Virtual GIF supported
vm-test-run-update-hardware-configuration> target # [   12.431644] kvm_amd: Virtual NMI enabled
vm-test-run-update-hardware-configuration> target # [   12.469206] EDAC MC: Ver: 3.0.0
vm-test-run-update-hardware-configuration> target # [   12.651697] systemd-networkd[511]: eth0: Gained IPv6LL
vm-test-run-update-hardware-configuration> target # [   12.863918] sshd-keygen-start[570]: Generating public/private rsa key pair.
vm-test-run-update-hardware-configuration> target # [   12.865211] sshd-keygen-start[570]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key
vm-test-run-update-hardware-configuration> target # [   12.866983] sshd-keygen-start[570]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
vm-test-run-update-hardware-configuration> target # [   12.868617] sshd-keygen-start[570]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [   12.869581] sshd-keygen-start[570]: SHA256:yabWoBQQrl33EuTr3TgjvO30KWAKZBO7U47pjLj6a1M root@target
vm-test-run-update-hardware-configuration> target # [   12.870952] sshd-keygen-start[570]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [   12.871998] sshd-keygen-start[570]: +---[RSA 4096]----+
vm-test-run-update-hardware-configuration> target # [   12.872877] sshd-keygen-start[570]: |  o.  .          |
vm-test-run-update-hardware-configuration> target # [   12.873789] sshd-keygen-start[570]: | ... o           |
vm-test-run-update-hardware-configuration> target # [   12.874667] sshd-keygen-start[570]: |  .oo +          |
vm-test-run-update-hardware-configuration> target # [   12.875677] sshd-keygen-start[570]: | o=..o = .       |
vm-test-run-update-hardware-configuration> target # [   12.876562] sshd-keygen-start[570]: |.o.B. + S        |
vm-test-run-update-hardware-configuration> target # [   12.877440] sshd-keygen-start[570]: |  *.E+oB o       |
vm-test-run-update-hardware-configuration> target # [   12.878324] sshd-keygen-start[570]: |.+ +.o*.B .      |
vm-test-run-update-hardware-configuration> target # [   12.879319] sshd-keygen-start[570]: |o = .. =.+ .     |
vm-test-run-update-hardware-configuration> target # [   12.880212] sshd-keygen-start[570]: |++oo  ..o.o      |
vm-test-run-update-hardware-configuration> target # [   12.881103] sshd-keygen-start[570]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   12.897559] sshd-keygen-start[609]: Generating public/private ed25519 key pair.
vm-test-run-update-hardware-configuration> target # [   12.899111] sshd-keygen-start[609]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
vm-test-run-update-hardware-configuration> target # [   12.900596] sshd-keygen-start[609]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
vm-test-run-update-hardware-configuration> target # [   12.902065] sshd-keygen-start[609]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [   12.902963] sshd-keygen-start[609]: SHA256:k+9Lg6lkJ22TAqJjbALe5Yfy8CBV7dD18DgZHFiyppY root@target
vm-test-run-update-hardware-configuration> target # [   12.904404] sshd-keygen-start[609]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [   12.905415] sshd-keygen-start[609]: +--[ED25519 256]--+
vm-test-run-update-hardware-configuration> target # [   12.906312] sshd-keygen-start[609]: |       .+*.      |
vm-test-run-update-hardware-configuration> target # [   12.908751] sshd-keygen-start[609]: |      o.+.B      |
vm-test-run-update-hardware-configuration> target # [   12.910195] sshd-keygen-start[609]: |     o = + o     |
vm-test-run-update-hardware-configuration> target # [   12.911555] sshd-keygen-start[609]: |    . *  ..      |
vm-test-run-update-hardware-configuration> target # [   12.912498] sshd-keygen-start[609]: |. ...E .S        |
vm-test-run-update-hardware-configuration> target # [   12.914165] sshd-keygen-start[609]: |+.o.+... *       |
vm-test-run-update-hardware-configuration> target # [   12.915063] sshd-keygen-start[609]: |+* = o=.O +      |
vm-test-run-update-hardware-configuration> target # [   12.915931] sshd-keygen-start[609]: |+.. *o.* + .     |
vm-test-run-update-hardware-configuration> target # [   12.916928] sshd-keygen-start[609]: |     o.   o.     |
vm-test-run-update-hardware-configuration> target # [   12.917829] sshd-keygen-start[609]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   12.919389] systemd-networkd[511]: eth1: Gained IPv6LL
vm-test-run-update-hardware-configuration> target # [   12.922038] systemd[1]: sshd-keygen.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   12.923202] systemd[1]: Finished SSH Host Keys Generation.
vm-test-run-update-hardware-configuration> target # [   12.924869] systemd[1]: Starting SSH Daemon...
vm-test-run-update-hardware-configuration> target # [   12.939146] systemd-vconsole-setup[597]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [   12.944424] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   12.950354] sshd[611]: Server listening on 0.0.0.0 port 22.
vm-test-run-update-hardware-configuration> target # [   12.951750] sshd[611]: Server listening on :: port 22.
vm-test-run-update-hardware-configuration> target # [   12.953510] systemd[1]: Started SSH Daemon.
vm-test-run-update-hardware-configuration> target # [   12.954638] systemd[1]: Reached target Multi-User System.
vm-test-run-update-hardware-configuration> target # [   12.956377] systemd[1]: Startup finished in 918ms (kernel) + 7.757s (initrd) + 4.278s (userspace) = 12.955s.
vm-test-run-update-hardware-configuration> target # Connection to localhost (::1) 22 port [tcp/ssh] succeeded!
vm-test-run-update-hardware-configuration> target: (finished: waiting for TCP port 22 on localhost, in 8.26 seconds)
vm-test-run-update-hardware-configuration> Setting up port forwarding from host port 54289 to guest port 22
vm-test-run-update-hardware-configuration> target # [   13.596435] sshd-session[617]: Connection closed by ::1 port 40002 [preauth]
vm-test-run-update-hardware-configuration> Host port 54289 is now listening
vm-test-run-update-hardware-configuration> target # [   15.599334] sshd-session[620]: Connection closed by 10.0.2.2 port 57896 [preauth]
vm-test-run-update-hardware-configuration> target # [   24.537074] sshd-session[625]: Accepted publickey for nonrootuser from 10.0.2.2 port 58512 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   24.544636] sshd-session[625]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   24.559639] systemd[1]: Created slice Slice /user/1000.
vm-test-run-update-hardware-configuration> target # [   24.562210] systemd[1]: Starting User Runtime Directory /run/user/1000...
vm-test-run-update-hardware-configuration> target # [   24.574581] systemd-logind[555]: New session '1' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   24.589627] systemd[1]: Finished User Runtime Directory /run/user/1000.
vm-test-run-update-hardware-configuration> target # [   24.593842] systemd[1]: Starting User Manager for UID 1000...
vm-test-run-update-hardware-configuration> target # [   24.611391] (systemd)[631]: pam_unix(systemd-user:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   24.616085] systemd-logind[555]: New session '2' of user 'nonrootuser' with class 'manager' and type 'unspecified'.
vm-test-run-update-hardware-configuration> target # [   24.630776] systemd[631]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   24.713458] systemd[631]: Queued start job for default target Main User Target.
vm-test-run-update-hardware-configuration> target # [   24.716963] systemd[631]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   24.719985] systemd[631]: Created slice User Application Slice.
vm-test-run-update-hardware-configuration> target # [   24.721273] systemd[631]: Started Daily Cleanup of User's Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   24.723534] systemd[631]: Reached target Paths.
vm-test-run-update-hardware-configuration> target # [   24.724643] systemd[631]: Reached target Timers.
vm-test-run-update-hardware-configuration> target # [   24.727224] systemd[631]: Starting D-Bus User Message Bus Socket...
vm-test-run-update-hardware-configuration> target # [   24.729245] systemd[631]: Starting Create User Files and Directories...
vm-test-run-update-hardware-configuration> target # [   24.752751] systemd[631]: Finished Create User Files and Directories.
vm-test-run-update-hardware-configuration> target # [   24.761762] systemd[631]: Listening on D-Bus User Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   24.764971] systemd[631]: Reached target Sockets.
vm-test-run-update-hardware-configuration> target # [   24.765889] systemd[631]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   24.766859] systemd[1]: Started User Manager for UID 1000.
vm-test-run-update-hardware-configuration> target # [   24.771271] systemd[1]: Started Session 1 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   24.773463] systemd[631]: Starting Run user-specific NixOS activation...
vm-test-run-update-hardware-configuration> target # [   24.801231] systemd[631]: Finished Run user-specific NixOS activation.
vm-test-run-update-hardware-configuration> target # [   24.802388] systemd[631]: Reached target Main User Target.
vm-test-run-update-hardware-configuration> target # [   24.803541] systemd[631]: Startup finished in 177ms.
vm-test-run-update-hardware-configuration> target # [   24.838760] sudo[652]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-facter
vm-test-run-update-hardware-configuration> target # [   24.845325] sudo[652]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   25.110538] sr 2:0:0:0: Attached scsi generic sg0 type 5
vm-test-run-update-hardware-configuration> target # [   25.034898] sudo[652]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   25.045128] sshd-session[643]: Received disconnect from 10.0.2.2 port 58512:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   25.046690] sshd-session[643]: Disconnected from user nonrootuser 10.0.2.2 port 58512
vm-test-run-update-hardware-configuration> target # [   25.048342] sshd-session[625]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   25.052634] systemd-logind[555]: Session 1 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> target # [   34.475101] sshd-session[682]: Accepted publickey for nonrootuser from 10.0.2.2 port 59452 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   34.481622] sshd-session[682]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   34.488304] systemd-logind[555]: New session '3' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   34.491504] systemd[1]: Started Session 3 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   34.541902] sudo[692]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-generate-config --no-filesystems --show-hardware-config
vm-test-run-update-hardware-configuration> target # [   34.548772] sudo[692]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   34.687818] sudo[692]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   34.696509] sshd-session[685]: Received disconnect from 10.0.2.2 port 59452:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   34.698058] sshd-session[685]: Disconnected from user nonrootuser 10.0.2.2 port 59452
vm-test-run-update-hardware-configuration> target # [   34.699713] sshd-session[682]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   34.704551] systemd-logind[555]: Session 3 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> (finished: run the VM test script, in 36.22 seconds)
vm-test-run-update-hardware-configuration> test script finished in 39.21s
vm-test-run-update-hardware-configuration> cleanup
vm-test-run-update-hardware-configuration> kill QemuMachine (pid 45)
vm-test-run-update-hardware-configuration> target # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/lb41b0anx1f98y9y5s9mdv97gjgsq740-python3-3.14.7/bin/python3.14)
vm-test-run-update-hardware-configuration> target # [2026-10-19T08:48:06Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-10-19T08:48:06Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-10-19T08:48:06Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> (finished: cleanup, in 0.15 seconds)