don't know how to build these paths:
  /nix/store/4wbw7805gh6c64yw659yax95nqhh11vq-vm-test-run-update-hardware-configuration.drv
warning: ignoring the client-specified setting 'store', because it is a restricted setting and you are not a trusted user
building '/nix/store/8bwrvmjvi5x3gcaaxjmvbxa2zqi7z4k8-test-script.drv' on nix-store.geninf.io:50051
test-script> build-x86-01: building 8bwrvmjvi5x3gcaaxjmvbxa2zqi7z4k8-test-script.drv
test-script> structuredAttrs is enabled
building '/nix/store/h026nyr200w7hc9kfsqm6dhxb47ghrj8-driverConfiguration.json.drv' on nix-store.geninf.io:50051
driverConfiguration.json> build-x86-01: building h026nyr200w7hc9kfsqm6dhxb47ghrj8-driverConfiguration.json.drv
driverConfiguration.json> structuredAttrs is enabled
building '/nix/store/2dnd7wvpf6q1zy2aabcll3xdk54ns5bw-nixos-test-driver-update-hardware-configuration.drv' on nix-store.geninf.io:50051
nixos-test-driver-update-hardware-configuration> build-x86-01: building 2dnd7wvpf6q1zy2aabcll3xdk54ns5bw-nixos-test-driver-update-hardware-configuration.drv
nixos-test-driver-update-hardware-configuration> Running type check (enable/disable: config.skipTypeCheck)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck
nixos-test-driver-update-hardware-configuration> All checks passed!
nixos-test-driver-update-hardware-configuration> Linting test script (enable/disable: config.skipLint)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint
nixos-test-driver-update-hardware-configuration> All checks passed!
building '/nix/store/4wbw7805gh6c64yw659yax95nqhh11vq-vm-test-run-update-hardware-configuration.drv' on nix-store.geninf.io:50051
vm-test-run-update-hardware-configuration> build-x86-01: building 4wbw7805gh6c64yw659yax95nqhh11vq-vm-test-run-update-hardware-configuration.drv
vm-test-run-update-hardware-configuration> Machine state will be reset. To keep it, pass --keep-machine-state
vm-test-run-update-hardware-configuration> start all VLans
vm-test-run-update-hardware-configuration> (finished: start all VLans, in 0.00 seconds)
vm-test-run-update-hardware-configuration> Test will time out and terminate in 3600.0 seconds
vm-test-run-update-hardware-configuration> run the VM test script
vm-test-run-update-hardware-configuration> additionally exposed symbols:
vm-test-run-update-hardware-configuration>     target,
vm-test-run-update-hardware-configuration>     vlan1,
vm-test-run-update-hardware-configuration>     start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh
vm-test-run-update-hardware-configuration> target: starting vm
vm-test-run-update-hardware-configuration> target # Disk image does not exist, creating the virtualisation disk image...
vm-test-run-update-hardware-configuration> target: QEMU running (pid 45)
vm-test-run-update-hardware-configuration> target # Formatting '/build/vm-state-target/tmp.S3eZWXiZsz', fmt=raw size=8589934592
vm-test-run-update-hardware-configuration> target # mke2fs 1.47.4 (6-Mar-2025)
vm-test-run-update-hardware-configuration> target # Discarding device blocks:       0/2097152               done
vm-test-run-update-hardware-configuration> target # Creating filesystem with 2097152 4k blocks and 524288 inodes
vm-test-run-update-hardware-configuration> target # Filesystem UUID: 9a83114b-32a7-4f9f-86a5-0f0136b45510
vm-test-run-update-hardware-configuration> target # Superblock backups stored on blocks:
vm-test-run-update-hardware-configuration> target # 	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Allocating group tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Writing inode tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Creating journal (16384 blocks): done
vm-test-run-update-hardware-configuration> target # Writing superblocks and filesystem accounting information:  0/64     done
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Virtualisation disk image created.
vm-test-run-update-hardware-configuration> target # Formatting 'empty0.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=536870912 lazy_refcounts=off refcount_bits=16
vm-test-run-update-hardware-configuration> target # Starting virtiofs daemons...
vm-test-run-update-hardware-configuration> target # [2026-10-19T12:54:23Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-19T12:54:23Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-19T12:54:23Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-19T12:54:23Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-19T12:54:23Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-19T12:54:23Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-19T12:54:23Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-19T12:54:23Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-19T12:54:23Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-19T12:54:23Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-10-19T12:54:23Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-10-19T12:54:23Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC550+7EF2C550 CA00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:02.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:06.0 CB00 PCI2.10 PnP PMM 7EFCC550 7EF2C550 CB00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:06.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Booting from ROM...
vm-test-run-update-hardware-configuration> target # Probing EDD (edd=off to disable)... ok[    0.000000] Linux version 6.18.56 (nixbld@localhost) (gcc (GCC) 16.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC @1791725172
vm-test-run-update-hardware-configuration> target # [    0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/4knrinnlra2bn3vs9475y93vwsdzlkg3-nixos-system-target-test/init regInfo=/nix/.ro-store/c9v7ggk8ys9pdllgpcrc1zlzbnnzbdah-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-provided physical RAM map:
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd4fff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000007ffd5000-0x000000007fffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013e7fffff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] NX (Execute Disable) protection: active
vm-test-run-update-hardware-configuration> target # [    0.000000] APIC: Static calls initialized
vm-test-run-update-hardware-configuration> target # [    0.000000] SMBIOS 2.8 present.
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: Memory slots populated: 1/1
vm-test-run-update-hardware-configuration> target # [    0.000000] Hypervisor detected: KVM
vm-test-run-update-hardware-configuration> target # [    0.000000] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
vm-test-run-update-hardware-configuration> target # [    0.000001] kvm-clock: using sched offset of 427285912 cycles
vm-test-run-update-hardware-configuration> target # [    0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
vm-test-run-update-hardware-configuration> target # [    0.000007] tsc: Detected 4192.124 MHz processor
vm-test-run-update-hardware-configuration> target # [    0.000605] last_pfn = 0x13e800 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000637] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
vm-test-run-update-hardware-configuration> target # [    0.000640] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
vm-test-run-update-hardware-configuration> target # [    0.000684] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.002364] found SMP MP-table at [mem 0x000f5450-0x000f545f]
vm-test-run-update-hardware-configuration> target # [    0.002388] Using GB pages for direct mapping
vm-test-run-update-hardware-configuration> target # [    0.002500] RAMDISK: [mem 0x7e2e3000-0x7ffcffff]
vm-test-run-update-hardware-configuration> target # [    0.002507] ACPI: Early table checksum verification disabled
vm-test-run-update-hardware-configuration> target # [    0.002510] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS )
vm-test-run-update-hardware-configuration> target # [    0.002515] ACPI: RSDT 0x000000007FFE2433 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002520] ACPI: FACP 0x000000007FFE222B 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002526] ACPI: DSDT 0x000000007FFE0040 0021EB (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002529] ACPI: FACS 0x000000007FFE0000 000040
vm-test-run-update-hardware-configuration> target # [    0.002530] ACPI: APIC 0x000000007FFE231F 000078 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002531] ACPI: HPET 0x000000007FFE2397 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002533] ACPI: MCFG 0x000000007FFE23CF 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002534] ACPI: WAET 0x000000007FFE240B 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002535] ACPI: Reserving FACP table memory at [mem 0x7ffe222b-0x7ffe231e]
vm-test-run-update-hardware-configuration> target # [    0.002536] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe222a]
vm-test-run-update-hardware-configuration> target # [    0.002537] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
vm-test-run-update-hardware-configuration> target # [    0.002537] ACPI: Reserving APIC table memory at [mem 0x7ffe231f-0x7ffe2396]
vm-test-run-update-hardware-configuration> target # [    0.002537] ACPI: Reserving HPET table memory at [mem 0x7ffe2397-0x7ffe23ce]
vm-test-run-update-hardware-configuration> target # [    0.002538] ACPI: Reserving MCFG table memory at [mem 0x7ffe23cf-0x7ffe240a]
vm-test-run-update-hardware-configuration> target # [    0.002538] ACPI: Reserving WAET table memory at [mem 0x7ffe240b-0x7ffe2432]
vm-test-run-update-hardware-configuration> target # [    0.002922] No NUMA configuration found
vm-test-run-update-hardware-configuration> target # [    0.002923] Faking a node at [mem 0x0000000000000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002926] NODE_DATA(0) allocated [mem 0x13e7f8780-0x13e7fdcff]
vm-test-run-update-hardware-configuration> target # [    0.003016] Zone ranges:
vm-test-run-update-hardware-configuration> target # [    0.003017]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
vm-test-run-update-hardware-configuration> target # [    0.003018]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
vm-test-run-update-hardware-configuration> target # [    0.003019]   Normal   [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003021]   Device   empty
vm-test-run-update-hardware-configuration> target # [    0.003021] Movable zone start for each node
vm-test-run-update-hardware-configuration> target # [    0.003022] Early memory node ranges
vm-test-run-update-hardware-configuration> target # [    0.003022]   node   0: [mem 0x0000000000001000-0x000000000009efff]
vm-test-run-update-hardware-configuration> target # [    0.003024]   node   0: [mem 0x0000000000100000-0x000000007ffd4fff]
vm-test-run-update-hardware-configuration> target # [    0.003024]   node   0: [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003025] Initmem setup node 0 [mem 0x0000000000001000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003046] On node 0, zone DMA: 1 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.003350] On node 0, zone DMA: 97 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.045742] On node 0, zone Normal: 43 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.046094] On node 0, zone Normal: 6144 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.046973] ACPI: PM-Timer IO Port: 0x608
vm-test-run-update-hardware-configuration> target # [    0.046989] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
vm-test-run-update-hardware-configuration> target # [    0.047015] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
vm-test-run-update-hardware-configuration> target # [    0.047017] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
vm-test-run-update-hardware-configuration> target # [    0.047019] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
vm-test-run-update-hardware-configuration> target # [    0.047019] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
vm-test-run-update-hardware-configuration> target # [    0.047020] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
vm-test-run-update-hardware-configuration> target # [    0.047021] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
vm-test-run-update-hardware-configuration> target # [    0.047023] ACPI: Using ACPI (MADT) for SMP configuration information
vm-test-run-update-hardware-configuration> target # [    0.047024] ACPI: HPET id: 0x8086a201 base: 0xfed00000
vm-test-run-update-hardware-configuration> target # [    0.047030] TSC deadline timer available
vm-test-run-update-hardware-configuration> target # [    0.047034] CPU topo: Max. logical packages:   1
vm-test-run-update-hardware-configuration> target # [    0.047034] CPU topo: Max. logical dies:       1
vm-test-run-update-hardware-configuration> target # [    0.047035] CPU topo: Max. dies per package:   1
vm-test-run-update-hardware-configuration> target # [    0.047037] CPU topo: Max. threads per core:   1
vm-test-run-update-hardware-configuration> target # [    0.047038] CPU topo: Num. cores per package:     1
vm-test-run-update-hardware-configuration> target # [    0.047038] CPU topo: Num. threads per package:   1
vm-test-run-update-hardware-configuration> target # [    0.047038] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs
vm-test-run-update-hardware-configuration> target # [    0.047059] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
vm-test-run-update-hardware-configuration> target # [    0.047086] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
vm-test-run-update-hardware-configuration> target # [    0.047087] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
vm-test-run-update-hardware-configuration> target # [    0.047088] PM: hibernation: Registered nosave memory: [mem 0x7ffd5000-0xffffffff]
vm-test-run-update-hardware-configuration> target # [    0.047089] [mem 0xc0000000-0xfed1bfff] available for PCI devices
vm-test-run-update-hardware-configuration> target # [    0.047091] Booting paravirtualized kernel on KVM
vm-test-run-update-hardware-configuration> target # [    0.047094] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
vm-test-run-update-hardware-configuration> target # [    0.050742] setup_percpu: NR_CPUS:512 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
vm-test-run-update-hardware-configuration> target # [    0.052460] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152
vm-test-run-update-hardware-configuration> target # [    0.052501] kvm-guest: PV spinlocks disabled, single CPU
vm-test-run-update-hardware-configuration> target # [    0.052503] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/4knrinnlra2bn3vs9475y93vwsdzlkg3-nixos-system-target-test/init regInfo=/nix/.ro-store/c9v7ggk8ys9pdllgpcrc1zlzbnnzbdah-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.052577] Unknown kernel command line parameters "regInfo=/nix/.ro-store/c9v7ggk8ys9pdllgpcrc1zlzbnnzbdah-closure-info/registration", will be passed to user space.
vm-test-run-update-hardware-configuration> target # [    0.052777] random: crng init done
vm-test-run-update-hardware-configuration> target # [    0.052778] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
vm-test-run-update-hardware-configuration> target # [    0.056240] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.057900] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.057929] software IO TLB: area num 1.
vm-test-run-update-hardware-configuration> target # [    0.125319] Fallback order for Node 0: 0
vm-test-run-update-hardware-configuration> target # [    0.125327] Built 1 zonelists, mobility grouping on.  Total pages: 780147
vm-test-run-update-hardware-configuration> target # [    0.125330] Policy zone: Normal
vm-test-run-update-hardware-configuration> target # [    0.127241] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
vm-test-run-update-hardware-configuration> target # [    0.132390] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
vm-test-run-update-hardware-configuration> target # [    0.137634] allocated 6291456 bytes of page_ext
vm-test-run-update-hardware-configuration> target # [    0.146928] ftrace: allocating 48842 entries in 192 pages
vm-test-run-update-hardware-configuration> target # [    0.146930] ftrace: allocated 192 pages with 2 groups
vm-test-run-update-hardware-configuration> target # [    0.147698] Dynamic Preempt: lazy
vm-test-run-update-hardware-configuration> target # [    0.147827] rcu: Preemptible hierarchical RCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.147828] rcu: 	RCU event tracing is enabled.
vm-test-run-update-hardware-configuration> target # [    0.147828] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.147830] 	Trampoline variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.147830] 	Rude variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.147830] 	Tracing variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.147831] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
vm-test-run-update-hardware-configuration> target # [    0.147832] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
vm-test-run-update-hardware-configuration> target # [    0.147843] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.147844] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.147845] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.151172] NR_IRQS: 33024, nr_irqs: 256, preallocated irqs: 16
vm-test-run-update-hardware-configuration> target # [    0.151441] rcu: srcu_init: Setting srcu_struct sizes based on contention.
vm-test-run-update-hardware-configuration> target # [    0.151447] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
vm-test-run-update-hardware-configuration> target # [    0.151614] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
vm-test-run-update-hardware-configuration> target # [    0.156902] Console: colour VGA+ 80x25
vm-test-run-update-hardware-configuration> target # [    0.156906] printk: legacy console [tty0] enabled
vm-test-run-update-hardware-configuration> target # [    0.192641] printk: legacy console [ttyS0] enabled
vm-test-run-update-hardware-configuration> target # [    0.339352] ACPI: Core revision 20250807
vm-test-run-update-hardware-configuration> target # [    0.340532] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
vm-test-run-update-hardware-configuration> target # [    0.342574] APIC: Switch to symmetric I/O mode setup
vm-test-run-update-hardware-configuration> target # [    0.343810] x2apic enabled
vm-test-run-update-hardware-configuration> target # [    0.344689] APIC: Switched APIC routing to: physical x2apic
vm-test-run-update-hardware-configuration> target # [    0.346821] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
vm-test-run-update-hardware-configuration> target # [    0.348110] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d51807ee, max_idle_ns: 440795380511 ns
vm-test-run-update-hardware-configuration> target # [    0.350279] Calibrating delay loop (skipped) preset value.. 8384.24 BogoMIPS (lpj=4192124)
vm-test-run-update-hardware-configuration> target # [    0.352378] x86/cpu: User Mode Instruction Prevention (UMIP) activated
vm-test-run-update-hardware-configuration> target # [    0.354348] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
vm-test-run-update-hardware-configuration> target # [    0.355277] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
vm-test-run-update-hardware-configuration> target # [    0.356282] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
vm-test-run-update-hardware-configuration> target # [    0.358277] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
vm-test-run-update-hardware-configuration> target # [    0.360278] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
vm-test-run-update-hardware-configuration> target # [    0.361276] Speculative Return Stack Overflow: Mitigation: Safe RET
vm-test-run-update-hardware-configuration> target # [    0.363276] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
vm-test-run-update-hardware-configuration> target # [    0.364288] Spectre V2 : Enabling IBPB for BPF
vm-test-run-update-hardware-configuration> target # [    0.365278] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
vm-test-run-update-hardware-configuration> target # [    0.366278] active return thunk: srso_alias_return_thunk
vm-test-run-update-hardware-configuration> target # [    0.367308] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
vm-test-run-update-hardware-configuration> target # [    0.369278] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
vm-test-run-update-hardware-configuration> target # [    0.371277] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
vm-test-run-update-hardware-configuration> target # [    0.372277] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
vm-test-run-update-hardware-configuration> target # [    0.373276] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
vm-test-run-update-hardware-configuration> target # [    0.375277] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
vm-test-run-update-hardware-configuration> target # [    0.376277] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
vm-test-run-update-hardware-configuration> target # [    0.378277] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
vm-test-run-update-hardware-configuration> target # [    0.380277] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
vm-test-run-update-hardware-configuration> target # [    0.381278] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
vm-test-run-update-hardware-configuration> target # [    0.382277] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
vm-test-run-update-hardware-configuration> target # [    0.384277] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
vm-test-run-update-hardware-configuration> target # [    0.385277] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
vm-test-run-update-hardware-configuration> target # [    0.386277] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
vm-test-run-update-hardware-configuration> target # [    0.388283] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16
vm-test-run-update-hardware-configuration> target # [    0.389278] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]:   24
vm-test-run-update-hardware-configuration> target # [    0.390277] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.
vm-test-run-update-hardware-configuration> target # [    0.418321] Freeing SMP alternatives memory: 48K
vm-test-run-update-hardware-configuration> target # [    0.419279] pid_max: default: 32768 minimum: 301
vm-test-run-update-hardware-configuration> target # [    0.420366] LSM: initializing lsm=capability,landlock,yama,bpf,ima
vm-test-run-update-hardware-configuration> target # [    0.421412] landlock: Up and running.
vm-test-run-update-hardware-configuration> target # [    0.422970] Yama: becoming mindful.
vm-test-run-update-hardware-configuration> target # [    0.424164] LSM support for eBPF active
vm-test-run-update-hardware-configuration> target # [    0.425375] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.426339] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.429573] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2)
vm-test-run-update-hardware-configuration> target # [    0.430706] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
vm-test-run-update-hardware-configuration> target # [    0.431284] ... version:                   2
vm-test-run-update-hardware-configuration> target # [    0.432193] ... bit width:                 48
vm-test-run-update-hardware-configuration> target # [    0.432993] ... generic counters:          6
vm-test-run-update-hardware-configuration> target # [    0.433277] ... generic bitmap:            000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.434277] ... fixed-purpose counters:    0
vm-test-run-update-hardware-configuration> target # [    0.435193] ... fixed-purpose bitmap:      0000000000000000
vm-test-run-update-hardware-configuration> target # [    0.436279] ... value mask:                0000ffffffffffff
vm-test-run-update-hardware-configuration> target # [    0.437279] ... max period:                00007fffffffffff
vm-test-run-update-hardware-configuration> target # [    0.438279] ... global_ctrl mask:          000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.439384] signal: max sigframe size: 3376
vm-test-run-update-hardware-configuration> target # [    0.440418] rcu: Hierarchical SRCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.441280] rcu: 	Max phase no-delay instances is 400.
vm-test-run-update-hardware-configuration> target # [    0.446120] smp: Bringing up secondary CPUs ...
vm-test-run-update-hardware-configuration> target # [    0.447289] smp: Brought up 1 node, 1 CPU
vm-test-run-update-hardware-configuration> target # [    0.448153] smpboot: Total of 1 processors activated (8384.24 BogoMIPS)
vm-test-run-update-hardware-configuration> target # [    0.449412] Memory: 2906400K/3120588K available (18132K kernel code, 2734K rwdata, 13652K rodata, 3660K init, 3620K bss, 201812K reserved, 0K cma-reserved)
vm-test-run-update-hardware-configuration> target # [    0.450474] devtmpfs: initialized
vm-test-run-update-hardware-configuration> target # [    0.451442] x86/mm: Memory block size: 128MB
vm-test-run-update-hardware-configuration> target # [    0.453202] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.454304] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).
vm-test-run-update-hardware-configuration> target # [    0.455358] pinctrl core: initialized pinctrl subsystem
vm-test-run-update-hardware-configuration> target # [    0.456563] PM: RTC time: 12:54:23, date: 2026-10-19
vm-test-run-update-hardware-configuration> target # [    0.459388] NET: Registered PF_NETLINK/PF_ROUTE protocol family
vm-test-run-update-hardware-configuration> target # [    0.460905] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.461311] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.462719] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.463286] audit: initializing netlink subsys (disabled)
vm-test-run-update-hardware-configuration> target # [    0.464466] thermal_sys: Registered thermal governor 'fair_share'
vm-test-run-update-hardware-configuration> target # [    0.464468] thermal_sys: Registered thermal governor 'bang_bang'
vm-test-run-update-hardware-configuration> target # [    0.465278] thermal_sys: Registered thermal governor 'step_wise'
vm-test-run-update-hardware-configuration> target # [    0.466281] audit: type=2000 audit(1792414464.342:1): state=initialized audit_enabled=0 res=1
vm-test-run-update-hardware-configuration> target # [    0.468279] thermal_sys: Registered thermal governor 'user_space'
vm-test-run-update-hardware-configuration> target # [    0.468281] thermal_sys: Registered thermal governor 'power_allocator'
vm-test-run-update-hardware-configuration> target # [    0.469300] cpuidle: using governor menu
vm-test-run-update-hardware-configuration> target # [    0.472012] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vm-test-run-update-hardware-configuration> target # [    0.472489] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.473280] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
vm-test-run-update-hardware-configuration> target # [    0.474287] PCI: Using configuration type 1 for base access
vm-test-run-update-hardware-configuration> target # [    0.475436] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
vm-test-run-update-hardware-configuration> target # [    0.480480] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.481278] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
vm-test-run-update-hardware-configuration> target # [    0.486277] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.487278] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
vm-test-run-update-hardware-configuration> target # [    0.497177] ACPI: Added _OSI(Module Device)
vm-test-run-update-hardware-configuration> target # [    0.498015] ACPI: Added _OSI(Processor Device)
vm-test-run-update-hardware-configuration> target # [    0.498278] ACPI: Added _OSI(Processor Aggregator Device)
vm-test-run-update-hardware-configuration> target # [    0.503260] ACPI: 1 ACPI AML tables successfully acquired and loaded
vm-test-run-update-hardware-configuration> target # [    0.509125] ACPI: Interpreter enabled
vm-test-run-update-hardware-configuration> target # [    0.509927] ACPI: PM: (supports S0 S3 S4 S5)
vm-test-run-update-hardware-configuration> target # [    0.510278] ACPI: Using IOAPIC for interrupt routing
vm-test-run-update-hardware-configuration> target # [    0.512829] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
vm-test-run-update-hardware-configuration> target # [    0.513279] PCI: Using E820 reservations for host bridge windows
vm-test-run-update-hardware-configuration> target # [    0.514446] ACPI: Enabled 2 GPEs in block 00 to 3F
vm-test-run-update-hardware-configuration> target # [    0.519453] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
vm-test-run-update-hardware-configuration> target # [    0.520283] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
vm-test-run-update-hardware-configuration> target # [    0.521361] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]
vm-test-run-update-hardware-configuration> target # [    0.522378] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
vm-test-run-update-hardware-configuration> target # [    0.523764] PCI host bridge to bus 0000:00
vm-test-run-update-hardware-configuration> target # [    0.524294] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.525279] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.526282] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.527279] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.528280] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.529278] pci_bus 0000:00: root bus resource [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.530279] pci_bus 0000:00: root bus resource [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.531420] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.532961] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.535462] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
vm-test-run-update-hardware-configuration> target # [    0.536298] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
vm-test-run-update-hardware-configuration> target # [    0.537407] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
vm-test-run-update-hardware-configuration> target # [    0.538740] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
vm-test-run-update-hardware-configuration> target # [    0.540295] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.543294] pci 0000:00:02.0: BAR 0 [io  0xc180-0xc19f]
vm-test-run-update-hardware-configuration> target # [    0.544289] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
vm-test-run-update-hardware-configuration> target # [    0.545317] pci 0000:00:02.0: BAR 4 [mem 0xe0000000000-0xe0000003fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.546290] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]
vm-test-run-update-hardware-configuration> target # [    0.548344] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.551304] pci 0000:00:03.0: BAR 0 [io  0xc1a0-0xc1bf]
vm-test-run-update-hardware-configuration> target # [    0.552290] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
vm-test-run-update-hardware-configuration> target # [    0.553324] pci 0000:00:03.0: BAR 4 [mem 0xe0000004000-0xe0000007fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.555343] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.558289] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
vm-test-run-update-hardware-configuration> target # [    0.559288] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
vm-test-run-update-hardware-configuration> target # [    0.560317] pci 0000:00:04.0: BAR 4 [mem 0xe0000008000-0xe000000bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.562227] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.564288] pci 0000:00:05.0: BAR 0 [io  0xc080-0xc0ff]
vm-test-run-update-hardware-configuration> target # [    0.565485] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]
vm-test-run-update-hardware-configuration> target # [    0.566317] pci 0000:00:05.0: BAR 4 [mem 0xe000000c000-0xe000000ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.568200] pci 0000:00:06.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.570296] pci 0000:00:06.0: BAR 0 [io  0xc1c0-0xc1df]
vm-test-run-update-hardware-configuration> target # [    0.571289] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]
vm-test-run-update-hardware-configuration> target # [    0.572317] pci 0000:00:06.0: BAR 4 [mem 0xe0000010000-0xe0000013fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.573290] pci 0000:00:06.0: ROM [mem 0xfeb80000-0xfebbffff pref]
vm-test-run-update-hardware-configuration> target # [    0.575394] pci 0000:00:07.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.577302] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]
vm-test-run-update-hardware-configuration> target # [    0.578348] pci 0000:00:07.0: BAR 4 [mem 0xe0000014000-0xe0000017fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.580664] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.582303] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]
vm-test-run-update-hardware-configuration> target # [    0.583319] pci 0000:00:08.0: BAR 4 [mem 0xe0000018000-0xe000001bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.585354] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.587303] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]
vm-test-run-update-hardware-configuration> target # [    0.588325] pci 0000:00:09.0: BAR 4 [mem 0xe000001c000-0xe000001ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.591337] pci 0000:00:0a.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.593466] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]
vm-test-run-update-hardware-configuration> target # [    0.594324] pci 0000:00:0a.0: BAR 4 [mem 0xe0000020000-0xe0000023fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.596357] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.598290] pci 0000:00:0b.0: BAR 0 [io  0xc100-0xc13f]
vm-test-run-update-hardware-configuration> target # [    0.599290] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]
vm-test-run-update-hardware-configuration> target # [    0.600546] pci 0000:00:0b.0: BAR 4 [mem 0xe0000024000-0xe0000027fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.602415] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.605042] pci 0000:00:0c.0: BAR 0 [io  0xc1e0-0xc1ff]
vm-test-run-update-hardware-configuration> target # [    0.606271] pci 0000:00:0c.0: BAR 1 [mem 0xfebdb000-0xfebdbfff]
vm-test-run-update-hardware-configuration> target # [    0.607325] pci 0000:00:0c.0: BAR 4 [mem 0xe0000028000-0xe000002bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.609441] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.611261] pci 0000:00:1d.0: BAR 4 [io  0xc200-0xc21f]
vm-test-run-update-hardware-configuration> target # [    0.612642] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.614183] pci 0000:00:1d.1: BAR 4 [io  0xc220-0xc23f]
vm-test-run-update-hardware-configuration> target # [    0.615601] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.617185] pci 0000:00:1d.2: BAR 4 [io  0xc240-0xc25f]
vm-test-run-update-hardware-configuration> target # [    0.618666] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.620160] pci 0000:00:1d.7: BAR 0 [mem 0xfebdc000-0xfebdcfff]
vm-test-run-update-hardware-configuration> target # [    0.621697] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.622763] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
vm-test-run-update-hardware-configuration> target # [    0.623672] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.625325] pci 0000:00:1f.2: BAR 4 [io  0xc260-0xc27f]
vm-test-run-update-hardware-configuration> target # [    0.626289] pci 0000:00:1f.2: BAR 5 [mem 0xfebdd000-0xfebddfff]
vm-test-run-update-hardware-configuration> target # [    0.627777] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.629060] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
vm-test-run-update-hardware-configuration> target # [    0.635195] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.636402] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.637392] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.638398] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.639393] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.640393] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.641407] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.642433] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.643329] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.644295] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.645297] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.646292] ACPI: PCI: Interrupt link GSID configured for IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.647290] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
vm-test-run-update-hardware-configuration> target # [    0.648291] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
vm-test-run-update-hardware-configuration> target # [    0.649294] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
vm-test-run-update-hardware-configuration> target # [    0.650294] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
vm-test-run-update-hardware-configuration> target # [    0.652157] iommu: Default domain type: Translated
vm-test-run-update-hardware-configuration> target # [    0.653082] iommu: DMA domain TLB invalidation policy: lazy mode
vm-test-run-update-hardware-configuration> target # [    0.654494] ACPI: bus type USB registered
vm-test-run-update-hardware-configuration> target # [    0.655331] usbcore: registered new interface driver usbfs
vm-test-run-update-hardware-configuration> target # [    0.656294] usbcore: registered new interface driver hub
vm-test-run-update-hardware-configuration> target # [    0.657285] usbcore: registered new device driver usb
vm-test-run-update-hardware-configuration> target # [    0.658968] NetLabel: Initializing
vm-test-run-update-hardware-configuration> target # [    0.659282] NetLabel:  domain hash size = 128
vm-test-run-update-hardware-configuration> target # [    0.660221] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
vm-test-run-update-hardware-configuration> target # [    0.661259] NetLabel:  unlabeled traffic allowed by default
vm-test-run-update-hardware-configuration> target # [    0.662219] PCI: Using ACPI for IRQ routing
vm-test-run-update-hardware-configuration> target # [    0.742672] pci 0000:00:01.0: vgaarb: setting as boot VGA device
vm-test-run-update-hardware-configuration> target # [    0.743274] pci 0000:00:01.0: vgaarb: bridge control possible
vm-test-run-update-hardware-configuration> target # [    0.743274] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vm-test-run-update-hardware-configuration> target # [    0.743280] vgaarb: loaded
vm-test-run-update-hardware-configuration> target # [    0.744119] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
vm-test-run-update-hardware-configuration> target # [    0.745117] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
vm-test-run-update-hardware-configuration> target # [    0.751419] clocksource: Switched to clocksource kvm-clock
vm-test-run-update-hardware-configuration> target # [    0.754706] VFS: Disk quotas dquot_6.6.0
vm-test-run-update-hardware-configuration> target # [    0.755633] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
vm-test-run-update-hardware-configuration> target # [    0.757647] pnp: PnP ACPI init
vm-test-run-update-hardware-configuration> target # [    0.758800] ACPI: IRQ 4 override to edge(!), high(!)
vm-test-run-update-hardware-configuration> target # [    0.760475] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
vm-test-run-update-hardware-configuration> target # [    0.762551] pnp: PnP ACPI: found 5 devices
vm-test-run-update-hardware-configuration> target # [    0.770537] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
vm-test-run-update-hardware-configuration> target # [    0.772405] clocksource: Switched to clocksource acpi_pm
vm-test-run-update-hardware-configuration> target # [    0.773641] NET: Registered PF_INET protocol family
vm-test-run-update-hardware-configuration> target # [    0.775225] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.789329] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.791365] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.793028] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.795654] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.797315] TCP: Hash tables configured (established 32768 bind 32768)
vm-test-run-update-hardware-configuration> target # [    0.798755] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.800401] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.801874] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.803489] NET: Registered PF_UNIX/PF_LOCAL protocol family
vm-test-run-update-hardware-configuration> target # [    0.804729] NET: Registered PF_XDP protocol family
vm-test-run-update-hardware-configuration> target # [    0.805807] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.807173] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.808473] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.809884] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.811311] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.812721] pci_bus 0000:00: resource 9 [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.814907] ACPI: \_SB_.GSIA: Enabled at IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.817010] ACPI: \_SB_.GSIB: Enabled at IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.818975] ACPI: \_SB_.GSIC: Enabled at IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.820979] ACPI: \_SB_.GSID: Enabled at IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.822665] PCI: CLS 0 bytes, default 64
vm-test-run-update-hardware-configuration> target # [    0.823641] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
vm-test-run-update-hardware-configuration> target # [    0.825116] Trying to unpack rootfs image as initramfs...
vm-test-run-update-hardware-configuration> target # [    0.830868] software IO TLB: mapped [mem 0x000000007a2e3000-0x000000007e2e3000] (64MB)
vm-test-run-update-hardware-configuration> target # [    0.832594] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d51807ee, max_idle_ns: 440795380511 ns
vm-test-run-update-hardware-configuration> target # [    0.866954] Initialise system trusted keyrings
vm-test-run-update-hardware-configuration> target # [    0.870055] workingset: timestamp_bits=40 max_order=20 bucket_order=0
vm-test-run-update-hardware-configuration> target # [    0.888642] Key type asymmetric registered
vm-test-run-update-hardware-configuration> target # [    0.892889] Asymmetric key parser 'x509' registered
vm-test-run-update-hardware-configuration> target # [    0.894006] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
vm-test-run-update-hardware-configuration> target # [    0.897990] io scheduler mq-deadline registered
vm-test-run-update-hardware-configuration> target # [    0.899005] io scheduler kyber registered
vm-test-run-update-hardware-configuration> target # [    0.902344] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
vm-test-run-update-hardware-configuration> target # [    0.905870] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
vm-test-run-update-hardware-configuration> target # [    0.911545] Linux agpgart interface v0.103
vm-test-run-update-hardware-configuration> target # [    0.912685] ACPI: bus type drm_connector registered
vm-test-run-update-hardware-configuration> target # [    0.915357] usbcore: registered new interface driver usbserial_generic
vm-test-run-update-hardware-configuration> target # [    0.916734] usbserial: USB Serial support registered for generic
vm-test-run-update-hardware-configuration> target # [    0.919873] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.
vm-test-run-update-hardware-configuration> target # [    0.919873] Please enable it if your BIOS has the CPPC option.
vm-test-run-update-hardware-configuration> target # [    0.922617] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
vm-test-run-update-hardware-configuration> target # [    0.929002] drop_monitor: Initializing network drop monitor service
vm-test-run-update-hardware-configuration> target # [    0.930436] NET: Registered PF_INET6 protocol family
vm-test-run-update-hardware-configuration> target # [    0.934370] Segment Routing with IPv6
vm-test-run-update-hardware-configuration> target # [    0.937891] In-situ OAM (IOAM) with IPv6
vm-test-run-update-hardware-configuration> target # [    0.939113] IPI shorthand broadcast: enabled
vm-test-run-update-hardware-configuration> target # [    0.947122] sched_clock: Marking stable (753030709, 193827769)->(1070434529, -123576051)
vm-test-run-update-hardware-configuration> target # [    0.953038] registered taskstats version 1
vm-test-run-update-hardware-configuration> target # [    0.954116] Loading compiled-in X.509 certificates
vm-test-run-update-hardware-configuration> target # [    0.969528] Demotion targets for Node 0: null
vm-test-run-update-hardware-configuration> target # [    0.972910] Key type .fscrypt registered
vm-test-run-update-hardware-configuration> target # [    0.973757] Key type fscrypt-provisioning registered
vm-test-run-update-hardware-configuration> target # [    0.976961] ima: No TPM chip found, activating TPM-bypass!
vm-test-run-update-hardware-configuration> target # [    0.978135] ima: Allocated hash algorithm: sha1
vm-test-run-update-hardware-configuration> target # [    0.980885] ima: No architecture policies found
vm-test-run-update-hardware-configuration> target # [    0.982050] PM:   Magic number: 14:615:936
vm-test-run-update-hardware-configuration> target # [    0.983648] RAS: Correctable Errors collector initialized.
vm-test-run-update-hardware-configuration> target # [    0.993797] clk: Disabling unused clocks
vm-test-run-update-hardware-configuration> target # [    0.994727] PM: genpd: Disabling unused power domains
vm-test-run-update-hardware-configuration> target # [    1.133599] Freeing initrd memory: 29620K
vm-test-run-update-hardware-configuration> target # [    1.136460] Freeing unused decrypted memory: 2028K
vm-test-run-update-hardware-configuration> target # [    1.139137] Freeing unused kernel image (initmem) memory: 3660K
vm-test-run-update-hardware-configuration> target # [    1.140430] Write protecting the kernel read-only data: 32768k
vm-test-run-update-hardware-configuration> target # [    1.141915] Freeing unused kernel image (text/rodata gap) memory: 296K
vm-test-run-update-hardware-configuration> target # [    1.143623] Freeing unused kernel image (rodata/data gap) memory: 684K
vm-test-run-update-hardware-configuration> target # [    1.178207] x86/mm: Checked W+X mappings: passed, no W+X pages found.
vm-test-run-update-hardware-configuration> target # [    1.179585] Run /init as init process
vm-test-run-update-hardware-configuration> target # [    1.189214] systemd[1]: Inserted module 'autofs4'
vm-test-run-update-hardware-configuration> target # [    1.204712] fuse: init (API version 7.45)
vm-test-run-update-hardware-configuration> target # [    1.210782] ACPI: \_SB_.GSIG: Enabled at IRQ 22
vm-test-run-update-hardware-configuration> target # [    1.213502] ACPI: \_SB_.GSIH: Enabled at IRQ 23
vm-test-run-update-hardware-configuration> target # [    1.216932] ACPI: \_SB_.GSIE: Enabled at IRQ 20
vm-test-run-update-hardware-configuration> target # [    1.219427] ACPI: \_SB_.GSIF: Enabled at IRQ 21
vm-test-run-update-hardware-configuration> target # [    1.226271] virtiofs virtio6: discovered new tag: nix-store
vm-test-run-update-hardware-configuration> target # [    1.228450] virtiofs virtio6: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.236482] virtiofs virtio7: discovered new tag: shared
vm-test-run-update-hardware-configuration> target # [    1.238556] virtiofs virtio7: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.250440] virtiofs virtio8: discovered new tag: xchg
vm-test-run-update-hardware-configuration> target # [    1.252588] virtiofs virtio8: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.272426] systemd[1]: Successfully made /usr/ read-only.
vm-test-run-update-hardware-configuration> target # [    1.608689] systemd[1]: systemd 261.3 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    1.614863] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    1.615942] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    1.617095] systemd[1]: Running in initrd.
vm-test-run-update-hardware-configuration> target # [    1.618368] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    1.619913] systemd[1]: Hostname set to <target>.
vm-test-run-update-hardware-configuration> target # [    1.680066] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    1.713201] systemd[1]: Queued start job for default target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    1.717189] systemd[1]: Created slice Slice /system/modprobe.
vm-test-run-update-hardware-configuration> target # [    1.718925] systemd[1]: Created slice Slice /system/systemd-makefs.
vm-test-run-update-hardware-configuration> target # [    1.720414] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    1.722186] systemd[1]: Expecting device /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    1.723374] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    1.724517] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    1.725674] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    1.726725] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    1.728031] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    1.729593] systemd[1]: Listening on Journal Socket (/dev/log).
vm-test-run-update-hardware-configuration> target # [    1.731089] systemd[1]: Listening on Journal Sockets.
vm-test-run-update-hardware-configuration> target # [    1.732362] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    1.733671] systemd[1]: Listening on udev Kernel Socket.
vm-test-run-update-hardware-configuration> target # [    1.734923] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    1.737930] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    1.741682] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    1.751406] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    1.760439] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    1.763692] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    1.769504] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    1.786416] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    1.794565] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    1.798664] systemd-journald[65]: Collecting audit messages is disabled.
vm-test-run-update-hardware-configuration> target # [    1.804438] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    1.812567] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config
vm-test-run-update-hardware-configuration> target # [    1.818683] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
vm-test-run-update-hardware-configuration> target # [    1.827119] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    1.831681] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
vm-test-run-update-hardware-configuration> target # [    1.863643] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    1.873033] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    1.886273] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    1.898211] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    1.911958] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    1.927501] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    1.933130] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    1.936922] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    1.944408] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    1.973019] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    1.782270] systemd-modules-load[66]: Inserted module 'dm_mod'
vm-test-run-update-hardware-configuration> target # [    1.784680] systemd-modules-load[66]: Inserted module 'virtio_balloon'
vm-test-run-update-hardware-configuration> target # [    1.788400] systemd-modules-load[66]: Inserted module 'virtio_gpu'
vm-test-run-update-hardware-configuration> target # [    1.797082] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    1.823264] systemd-udevd[73]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    1.839231] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    1.856153] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    1.871163] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    1.873746] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    1.874825] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    2.303178] virtio_blk virtio2: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.307528] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
vm-test-run-update-hardware-configuration> target # [    2.316175] serio: i8042 KBD port at 0x60,0x64 irq 1
vm-test-run-update-hardware-configuration> target # [    2.317029] serio: i8042 AUX port at 0x60,0x64 irq 12
vm-test-run-update-hardware-configuration> target # [    2.330321] virtio_blk virtio2: [vda] 16777216 512-byte logical blocks (8.59 GB/8.00 GiB)
vm-test-run-update-hardware-configuration> target # [    2.349705] virtio_blk virtio3: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.353419] virtio_blk virtio3: [vdb] 1048576 512-byte logical blocks (537 MB/512 MiB)
vm-test-run-update-hardware-configuration> target # [    2.369709] SCSI subsystem initialized
vm-test-run-update-hardware-configuration> target # [    2.378643] ehci-pci 0000:00:1d.7: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.379541] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
vm-test-run-update-hardware-configuration> target # [    2.381505] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdc000
vm-test-run-update-hardware-configuration> target # [    2.388888] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
vm-test-run-update-hardware-configuration> target # [    2.391474] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.392767] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.397132] usb usb1: Product: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.398402] usb usb1: Manufacturer: Linux 6.18.56 ehci_hcd
vm-test-run-update-hardware-configuration> target # [    2.400400] usb usb1: SerialNumber: 0000:00:1d.7
vm-test-run-update-hardware-configuration> target # [    2.208902] (udev-worker)[98]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.404418] hub 1-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.405744] hub 1-0:1.0: 6 ports detected
vm-test-run-update-hardware-configuration> target # [    2.213485] (udev-worker)[97]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.411533] uhci_hcd 0000:00:1d.0: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.412400] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
vm-test-run-update-hardware-configuration> target # [    2.425978] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
vm-test-run-update-hardware-configuration> target # [    2.236060] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    2.445751] uhci_hcd 0000:00:1d.0: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.452249] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200
vm-test-run-update-hardware-configuration> target # [    2.279650] systemd-vconsole-setup[106]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [    2.282840] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    2.481905] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.483291] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.496388] usb usb2: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.503324] usb usb2: Manufacturer: Linux 6.18.56 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.312775] systemd[1]: Found device /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.315938] systemd[1]: Reached target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    2.510874] usb usb2: SerialNumber: 0000:00:1d.0
vm-test-run-update-hardware-configuration> target # [    2.319332] systemd[1]: Starting Make File System on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.514540] hub 2-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.519355] hub 2-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.528887] uhci_hcd 0000:00:1d.1: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.529742] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
vm-test-run-update-hardware-configuration> target # [    2.533960] uhci_hcd 0000:00:1d.1: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.537017] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220
vm-test-run-update-hardware-configuration> target # [    2.348270] systemd-makefs[109]: Formatting /dev/vdb as ext4
vm-test-run-update-hardware-configuration> target # [    2.549158] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.550666] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.554362] usb usb3: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.556862] usb usb3: Manufacturer: Linux 6.18.56 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.558075] usb usb3: SerialNumber: 0000:00:1d.1
vm-test-run-update-hardware-configuration> target # [    2.559665] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
vm-test-run-update-hardware-configuration> target # [    2.561338] hub 3-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.563234] hub 3-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.564527] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
vm-test-run-update-hardware-configuration> target # [    2.567735] uhci_hcd 0000:00:1d.2: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.568683] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
vm-test-run-update-hardware-configuration> target # [    2.570588] ahci 0000:00:1f.2: flags: 64bit ncq only
vm-test-run-update-hardware-configuration> target # [    2.381109] systemd-makefs[109]: /dev/vdb successfully formatted as ext4 (label "vdb", uuid f8a48294-19f0-4d35-a530-e79b338b6974)
vm-test-run-update-hardware-configuration> target # [    2.383403] systemd[1]: Finished Make File System on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.387114] systemd[1]: Starting File System Check on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.586945] scsi host0: ahci
vm-test-run-update-hardware-configuration> target # [    2.591019] uhci_hcd 0000:00:1d.2: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.595052] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240
vm-test-run-update-hardware-configuration> target # [    2.599490] scsi host1: ahci
vm-test-run-update-hardware-configuration> target # [    2.602974] scsi host2: ahci
vm-test-run-update-hardware-configuration> target # [    2.609257] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.417405] systemd-fsck[124]: vdb: clean, 12/32768 files, 6385/131072 blocks
vm-test-run-update-hardware-configuration> target # [    2.613187] scsi host3: ahci
vm-test-run-update-hardware-configuration> target # [    2.616024] scsi host4: ahci
vm-test-run-update-hardware-configuration> target # [    2.617415] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.619304] scsi host5: ahci
vm-test-run-update-hardware-configuration> target # [    2.620258] ata1: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd100 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.623005] usb usb4: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.623795] usb usb4: Manufacturer: Linux 6.18.56 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.624954] usb usb4: SerialNumber: 0000:00:1d.2
vm-test-run-update-hardware-configuration> target # [    2.626176] ata2: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd180 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.628139] hub 4-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.632271] ata3: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd200 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.440456] systemd[1]: Finished File System Check on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.635689] hub 4-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.641000] ata4: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd280 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.647860] ata5: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd300 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.649866] usb 1-1: new high-speed USB device number 2 using ehci-pci
vm-test-run-update-hardware-configuration> target # [    2.655251] ata6: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd380 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.588212] systemd[1]: Mounting /sysroot...
vm-test-run-update-hardware-configuration> target # [    2.784933] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
vm-test-run-update-hardware-configuration> target # [    2.786293] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
vm-test-run-update-hardware-configuration> target # [    2.788600] usb 1-1: Product: QEMU USB Tablet
vm-test-run-update-hardware-configuration> target # [    2.790852] usb 1-1: Manufacturer: QEMU
vm-test-run-update-hardware-configuration> target # [    2.791537] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1
vm-test-run-update-hardware-configuration> target # [    2.814323] hid: raw HID events driver (C) Jiri Kosina
vm-test-run-update-hardware-configuration> target # [    2.968545] ata2: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.969862] ata5: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.970975] ata6: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.972084] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.973213] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
vm-test-run-update-hardware-configuration> target # [    2.974568] ata3.00: applying bridge limits
vm-test-run-update-hardware-configuration> target # [    2.975481] ata3.00: configured for UDMA/100
vm-test-run-update-hardware-configuration> target # [    2.976502] ata1: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.977883] ata4: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.979478] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
vm-test-run-update-hardware-configuration> target # [    3.035362] usbcore: registered new interface driver usbhid
vm-test-run-update-hardware-configuration> target # [    3.039454] usbhid: USB HID core driver
vm-test-run-update-hardware-configuration> target # [    3.056220] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2
vm-test-run-update-hardware-configuration> target # [    3.066399] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
vm-test-run-update-hardware-configuration> target # [    3.071324] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
vm-test-run-update-hardware-configuration> target # [    3.085068] EXT4-fs (vdb): mounted filesystem f8a48294-19f0-4d35-a530-e79b338b6974 r/w with ordered data mode. Quota mode: none.
vm-test-run-update-hardware-configuration> target # [    2.899495] systemd[1]: Mounted /sysroot.
vm-test-run-update-hardware-configuration> target # [    2.903102] systemd[1]: Reached target Initrd Root File System.
vm-test-run-update-hardware-configuration> target # [    2.906463] systemd[1]: Starting Mountpoints Configured in the Real Root...
vm-test-run-update-hardware-configuration> target # [    3.111110] cdrom: Uniform CD-ROM driver Revision: 3.20
vm-test-run-update-hardware-configuration> target # [    2.939373] systemd-sysroot-fstab-check[148]: /sysroot should be mounted in the initrd, will request daemon-reload.
vm-test-run-update-hardware-configuration> target # [    2.945076] systemd[1]: Reload requested from client PID 148 ('systemd-sysroot') (unit initrd-parse-etc.service)...
vm-test-run-update-hardware-configuration> target # [    2.948277] systemd[1]: Reloading...
vm-test-run-update-hardware-configuration> target # [    3.054487] systemd[1]: Reloading finished in 106 ms.
vm-test-run-update-hardware-configuration> target # [    3.062743] systemd-sysroot-fstab-check[148]: Requesting initrd-fs.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    3.067971] systemd-sysroot-fstab-check[148]: Requesting swap.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    3.072636] systemd[1]: initrd-parse-etc.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.075092] systemd[1]: Finished Mountpoints Configured in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.076493] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.
vm-test-run-update-hardware-configuration> target # [    3.589133] systemd[1]: Mounting /sysroot/nix/.ro-store...
vm-test-run-update-hardware-configuration> target # [    3.594239] systemd[1]: Mounting /sysroot/nix/.rw-store...
vm-test-run-update-hardware-configuration> target # [    3.599207] systemd[1]: Mounting /sysroot/run...
vm-test-run-update-hardware-configuration> target # [    3.604788] systemd[1]: Mounting /sysroot/tmp/shared...
vm-test-run-update-hardware-configuration> target # [    3.609140] systemd[1]: Mounting /sysroot/tmp/xchg...
vm-test-run-update-hardware-configuration> target # [    3.633169] systemd[1]: Mounted /sysroot/nix/.ro-store.
vm-test-run-update-hardware-configuration> target # [    3.634950] systemd[1]: Mounted /sysroot/nix/.rw-store.
vm-test-run-update-hardware-configuration> target # [    3.641066] systemd[1]: Mounted /sysroot/run.
vm-test-run-update-hardware-configuration> target # [    3.643082] systemd[1]: Mounted /sysroot/tmp/shared.
vm-test-run-update-hardware-configuration> target # [    3.644326] systemd[1]: Mounted /sysroot/tmp/xchg.
vm-test-run-update-hardware-configuration> target # [    3.649098] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    3.659232] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.662107] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    3.663882] systemd[1]: Mounting /sysroot/nix/store...
vm-test-run-update-hardware-configuration> target # [    3.684837] systemd[1]: Mounted /sysroot/nix/store.
vm-test-run-update-hardware-configuration> target # [    3.686370] systemd[1]: Reached target Initrd File Systems.
vm-test-run-update-hardware-configuration> target # [    3.689111] systemd[1]: Starting Find NixOS closure...
vm-test-run-update-hardware-configuration> target # [    3.692152] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...
vm-test-run-update-hardware-configuration> target # [    3.715693] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.724208] systemd[1]: Finished Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    3.725988] systemd[1]: Reached target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    3.728637] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...
vm-test-run-update-hardware-configuration> target # [    3.744880] systemd[1]: Stopped target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    3.746819] systemd[1]: Stopped target Basic System.
vm-test-run-update-hardware-configuration> target # [    3.748256] systemd[1]: Stopped target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    3.750185] systemd[1]: Stopped target Path Units.
vm-test-run-update-hardware-configuration> target # [    3.751272] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.752745] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    3.754694] systemd[1]: Stopped target Slice Units.
vm-test-run-update-hardware-configuration> target # [    3.756438] systemd[1]: Stopped target Socket Units.
vm-test-run-update-hardware-configuration> target # [    3.758191] systemd[1]: Stopped target System Initialization.
vm-test-run-update-hardware-configuration> target # [    3.759325] systemd[1]: Stopped target Swaps.
vm-test-run-update-hardware-configuration> target # [    3.760323] systemd[1]: Stopped target Timer Units.
vm-test-run-update-hardware-configuration> target # [    3.762082] systemd[1]: dbus.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.763167] systemd[1]: Closed D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    3.764323] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.765902] systemd[1]: Stopped Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    3.767347] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    3.769183] systemd[1]: systemd-sysctl.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.770589] systemd[1]: Stopped Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    3.771973] systemd[1]: systemd-modules-load.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.773674] systemd[1]: Stopped Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    3.775198] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.778131] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.779531] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.781069] systemd[1]: Stopped Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    3.782657] systemd[1]: Stopped target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    3.784141] systemd[1]: Stopped target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    3.785651] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.787477] systemd[1]: Stopped Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    3.789785] systemd[1]: Stopping Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    3.791220] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.793724] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    3.805745] systemd[1]: initrd-cleanup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.809102] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.
vm-test-run-update-hardware-configuration> target # [    3.815468] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.818732] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    3.820808] systemd[1]: systemd-udevd.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.822227] systemd[1]: Stopped Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    3.825094] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.827830] systemd[1]: Closed udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    3.829720] systemd[1]: Starting Cleanup udev Database...
vm-test-run-update-hardware-configuration> target # [    3.831225] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.833755] systemd[1]: Stopped Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    3.834938] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.837206] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    3.839150] systemd[1]: kmod-static-nodes.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.840504] systemd[1]: Stopped Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    3.859447] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.861311] systemd[1]: Finished Cleanup udev Database.
vm-test-run-update-hardware-configuration> target # [    3.864079] systemd[1]: Reached target Switch Root.
vm-test-run-update-hardware-configuration> target # [    3.866075] systemd[1]: Starting NixOS Activation...
vm-test-run-update-hardware-configuration> target # [    3.930415] initrd-nixos-activation-start[200]: booting system configuration /nix/store/4knrinnlra2bn3vs9475y93vwsdzlkg3-nixos-system-target-test
vm-test-run-update-hardware-configuration> target # [    3.954814] initrd-nixos-activation-start[200]: running activation script...
vm-test-run-update-hardware-configuration> target # [    4.138366] initrd-nixos-activation-start[223]: setting up /etc...
vm-test-run-update-hardware-configuration> target # [    4.233109] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.235127] systemd[1]: Finished NixOS Activation.
vm-test-run-update-hardware-configuration> target # [    4.237371] systemd[1]: Starting Switch Root...
vm-test-run-update-hardware-configuration> target # [    4.250360] systemd[1]: Switching root.
vm-test-run-update-hardware-configuration> target # [    4.574306] systemd-journald[65]: Received SIGTERM from PID 1 (systemd).
vm-test-run-update-hardware-configuration> target: waiting for TCP port 22 on localhost
vm-test-run-update-hardware-configuration> target: waiting for the VM to finish booting
vm-test-run-update-hardware-configuration> target # [    7.353284] NET: Registered PF_VSOCK protocol family
vm-test-run-update-hardware-configuration> target # [    7.705541] systemd[1]: systemd 261.3 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    7.710400] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    7.711352] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    7.712362] systemd[1]: Detected first boot.
vm-test-run-update-hardware-configuration> target # [    7.714128] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    7.810082] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    7.863317] systemd[1]: Applying preset policy.
vm-test-run-update-hardware-configuration> target # [    8.011556] systemd[1]: Populated /etc with preset unit settings.
vm-test-run-update-hardware-configuration> target # [    8.182260] systemd[1]: initrd-switch-root.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    8.183954] systemd[1]: Stopped initrd-switch-root.service.
vm-test-run-update-hardware-configuration> target # [    8.186312] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
vm-test-run-update-hardware-configuration> target # [    8.188538] systemd[1]: Created slice Slice /system/getty.
vm-test-run-update-hardware-configuration> target # [    8.190026] systemd[1]: Created slice User and Session Slice.
vm-test-run-update-hardware-configuration> target # [    8.191133] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    8.192573] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
vm-test-run-update-hardware-configuration> target # [    8.193904] systemd[1]: Expecting device /dev/hvc0...
vm-test-run-update-hardware-configuration> target # [    8.194834] systemd[1]: Expecting device /dev/ttyS0...
vm-test-run-update-hardware-configuration> target # [    8.195731] systemd[1]: Reached target Local Encrypted Volumes.
vm-test-run-update-hardware-configuration> target # [    8.196816] systemd[1]: Stopped target initrd-fs.target.
vm-test-run-update-hardware-configuration> target # [    8.197717] systemd[1]: Stopped target initrd-root-fs.target.
vm-test-run-update-hardware-configuration> target # [    8.198730] systemd[1]: Stopped target initrd-switch-root.target.
vm-test-run-update-hardware-configuration> target # [    8.199843] systemd[1]: Reached target Virtual Machines and Containers.
vm-test-run-update-hardware-configuration> target # [    8.200981] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    8.201864] systemd[1]: Reached target Remote File Systems.
vm-test-run-update-hardware-configuration> target # [    8.202865] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    8.203740] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    8.205562] systemd[1]: Listening on Query the User Interactively for a Password.
vm-test-run-update-hardware-configuration> target # [    8.208091] systemd[1]: Listening on Process Core Dump Socket.
vm-test-run-update-hardware-configuration> target # [    8.210203] systemd[1]: Listening on Credential Encryption/Decryption.
vm-test-run-update-hardware-configuration> target # [    8.212312] systemd[1]: Listening on Factory Reset Management.
vm-test-run-update-hardware-configuration> target # [    8.213623] systemd[1]: Listening on Hostname Service Socket.
vm-test-run-update-hardware-configuration> target # [    8.216359] systemd[1]: Starting Journal Log Access Socket...
vm-test-run-update-hardware-configuration> target # [    8.218654] systemd[1]: Listening on Journal Audit Socket.
vm-test-run-update-hardware-configuration> target # [    8.220424] systemd[1]: Listening on Console Output Muting Service Socket.
vm-test-run-update-hardware-configuration> target # [    8.221701] systemd[1]: Listening on Network Management Metrics Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    8.223137] systemd[1]: Listening on Network Management Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    8.224349] systemd[1]: Listening on Network Management Netlink Socket.
vm-test-run-update-hardware-configuration> target # [    8.225588] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
vm-test-run-update-hardware-configuration> target # [    8.226897] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    8.228423] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
vm-test-run-update-hardware-configuration> target # [    8.232148] systemd[1]: Listening on Disk Repartitioning Service Socket.
vm-test-run-update-hardware-configuration> target # [    8.233367] systemd[1]: Listening on Resolve Monitor Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    8.234558] systemd[1]: Listening on Resolve Service Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    8.235717] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    8.236796] systemd[1]: Listening on udev Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    8.238896] systemd[1]: Mounting Huge Pages File System...
vm-test-run-update-hardware-configuration> target # [    8.241856] systemd[1]: Mounting POSIX Message Queue File System...
vm-test-run-update-hardware-configuration> target # [    8.248921] systemd[1]: Mounting Kernel Debug File System...
vm-test-run-update-hardware-configuration> target # [    8.256363] systemd[1]: Mounting Kernel Trace File System...
vm-test-run-update-hardware-configuration> target # [    8.267549] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    8.278646] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    8.285870] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
vm-test-run-update-hardware-configuration> target # [    8.292407] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore
vm-test-run-update-hardware-configuration> target # [    8.295934] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [    8.300899] systemd[1]: Mounting FUSE Control File System...
vm-test-run-update-hardware-configuration> target # [    8.303955] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
vm-test-run-update-hardware-configuration> target # [    8.310386] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    8.314028] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    8.322864] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...
vm-test-run-update-hardware-configuration> target # [    8.336442] systemd[1]: Starting Remount Root and Kernel File Systems...
vm-test-run-update-hardware-configuration> target # [    8.339030] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    8.351173] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    8.360202] systemd[1]: Listening on Journal Log Access Socket.
vm-test-run-update-hardware-configuration> target # [    8.363181] systemd[1]: Mounted Huge Pages File System.
vm-test-run-update-hardware-configuration> target # [    8.367245] systemd[1]: Mounted POSIX Message Queue File System.
vm-test-run-update-hardware-configuration> target # [    8.368657] systemd-journald[293]: Collecting audit messages is enabled.
vm-test-run-update-hardware-configuration> target # [    8.371999] systemd[1]: Mounted Kernel Debug File System.
vm-test-run-update-hardware-configuration> target # [    8.376086] systemd[1]: Mounted Kernel Trace File System.
vm-test-run-update-hardware-configuration> target # [    8.391214] loop: module loaded
vm-test-run-update-hardware-configuration> target # [    8.392024] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    8.401278] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    8.407639] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    8.416896] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    8.420996] EXT4-fs (vdb): re-mounted f8a48294-19f0-4d35-a530-e79b338b6974.
vm-test-run-update-hardware-configuration> target # [    8.233819] systemd[1]: Queued start job for default target Multi-User System.
vm-test-run-update-hardware-configuration> target # [    8.430388] systemd[1]: Mounting Kernel Configuration File System...
vm-test-run-update-hardware-configuration> target # [    8.235970] systemd[1]: Unnecessary job was removed for /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    8.239323] systemd[1]: systemd-journald.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    8.240883] systemd-modules-load[294]: Inserted module 'loop'
vm-test-run-update-hardware-configuration> target # [    8.242794] systemd-oomd[295]: No swap; memory pressure usage will be degraded
vm-test-run-update-hardware-configuration> target # [    8.440423] systemd[1]: Starting Firewall...
vm-test-run-update-hardware-configuration> target # [    8.447005] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    8.461945] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    8.473565] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.
vm-test-run-update-hardware-configuration> target # [    8.484376] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    8.304114] systemd[1]: Mounted FUSE Control File System.
vm-test-run-update-hardware-configuration> target # [    8.309109] systemd[1]: Finished Remount Root and Kernel File Systems.
vm-test-run-update-hardware-configuration> target # [    8.327345] systemd[1]: Listening on Disk Image Download Service Socket.
vm-test-run-update-hardware-configuration> target # [    8.335523] systemd[1]: Starting Flush Journal to Persistent Storage...
vm-test-run-update-hardware-configuration> target # [    8.337372] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore
vm-test-run-update-hardware-configuration> target # [    8.346694] systemd[1]: Starting Load/Save OS Random Seed...
vm-test-run-update-hardware-configuration> target # [    8.347758] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    8.366337] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    8.377270] systemd[1]: Starting Network Name Resolution...
vm-test-run-update-hardware-configuration> target # [    8.409217] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    8.410616] systemd[1]: Mounted Kernel Configuration File System.
vm-test-run-update-hardware-configuration> target # [    8.422961] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    8.621618] systemd-journald[293]: Received client request to flush runtime journal.
vm-test-run-update-hardware-configuration> target # [    8.624354] systemd[1]: Finished Load/Save OS Random Seed.
vm-test-run-update-hardware-configuration> target # [    8.626295] systemd[1]: Reached target First Boot Complete.
vm-test-run-update-hardware-configuration> target # [    8.627901] systemd-resolved[321]: Positive Trust Anchors:
vm-test-run-update-hardware-configuration> target # [    8.631554] systemd-resolved[321]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
vm-test-run-update-hardware-configuration> target # [    8.635223] systemd-resolved[321]: . IN DS 38696 8 2 683d2d0acb8c9b712a1948b27f741219298d0a450d612c483af444a4c0fb2b16
vm-test-run-update-hardware-configuration> target # [    8.639336] systemd-resolved[321]: Negative trust anchors: home.arpa 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 170.0.0.192.in-addr.arpa 171.0.0.192.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa ipv4only.arpa resolver.arpa corp home internal intranet lan local private test
vm-test-run-update-hardware-configuration> target # [    8.650741] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    8.652234] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    8.655167] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    8.656700] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    8.658858] systemd[1]: Finished Flush Journal to Persistent Storage.
vm-test-run-update-hardware-configuration> target # [    8.665511] systemd-resolved[321]: Using system hostname 'target'.
vm-test-run-update-hardware-configuration> target # [    8.668751] systemd[1]: Started Network Name Resolution.
vm-test-run-update-hardware-configuration> target # [    8.673178] systemd-udevd[333]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    8.711701] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    8.832912] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [    8.902760] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.
vm-test-run-update-hardware-configuration> target # [    8.953295] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.
vm-test-run-update-hardware-configuration> target # [    8.961281] (udev-worker)[366]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    8.964324] (udev-worker)[367]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    8.992735] systemd[1]: Mounting /run/wrappers...
vm-test-run-update-hardware-configuration> target # [    9.027088] systemd[1]: Mounted /run/wrappers.
vm-test-run-update-hardware-configuration> target # [    9.027992] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    9.032291] systemd[1]: Listening on Boot Loader Control Service Socket.
vm-test-run-update-hardware-configuration> target # [    9.036140] systemd[1]: Starting register-nix-paths.service...
vm-test-run-update-hardware-configuration> target # [    9.043893] systemd[1]: Starting Create SUID/SGID Wrappers...
vm-test-run-update-hardware-configuration> target # [    9.044961] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.
vm-test-run-update-hardware-configuration> target # [    9.050333] systemd[1]: Starting Save Transient machine-id to Disk...
vm-test-run-update-hardware-configuration> target # [    9.058116] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    9.170860] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.180294] systemd[1]: Finished Save Transient machine-id to Disk.
vm-test-run-update-hardware-configuration> target # [    9.189553] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    9.205075] systemd[1]: Starting Rebuild Journal Catalog...
vm-test-run-update-hardware-configuration> target # [    9.213333] systemd[1]: Starting Record System Boot/Shutdown in UTMP...
vm-test-run-update-hardware-configuration> target # [    9.325108] systemd[1]: Finished Record System Boot/Shutdown in UTMP.
vm-test-run-update-hardware-configuration> target # [    9.341303] systemd[1]: Finished Rebuild Journal Catalog.
vm-test-run-update-hardware-configuration> target # [    9.350416] systemd[1]: Starting Update is Completed...
vm-test-run-update-hardware-configuration> target # [    9.556042] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console
vm-test-run-update-hardware-configuration> target # [    9.399468] systemd[1]: Finished Update is Completed.
vm-test-run-update-hardware-configuration> target # [    9.620129] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
vm-test-run-update-hardware-configuration> target # [    9.528088] systemd[1]: Finished Firewall.
vm-test-run-update-hardware-configuration> target # [    9.528992] systemd[1]: Reached target Preparation for Network.
vm-test-run-update-hardware-configuration> target # [    9.532067] systemd[1]: Listening on Network Management Resolve Hook Socket.
vm-test-run-update-hardware-configuration> target # [    9.538924] systemd[1]: Starting Network Management...
vm-test-run-update-hardware-configuration> target # [    9.688861] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
vm-test-run-update-hardware-configuration> target # [    9.694486] ACPI: button: Power Button [PWRF]
vm-test-run-update-hardware-configuration> target # [    9.710161] mousedev: PS/2 mouse device common for all mice
vm-test-run-update-hardware-configuration> target # [    9.736344] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:07.0/virtio5/input/input4
vm-test-run-update-hardware-configuration> target # [    9.632070] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.636059] systemd[1]: Finished Create SUID/SGID Wrappers.
vm-test-run-update-hardware-configuration> target # [    9.766870] Console: switching to colour dummy device 80x25
vm-test-run-update-hardware-configuration> target # [    9.849143] rtc_cmos PNP0B00:00: RTC can wake from S4
vm-test-run-update-hardware-configuration> target # [    9.661281] systemd[1]: Finished register-nix-paths.service.
vm-test-run-update-hardware-configuration> target # [    9.664660] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    9.666090] systemd[1]: Started Discard unused filesystem blocks once a week.
vm-test-run-update-hardware-configuration> target # [    9.667699] systemd[1]: Started Daily Cleanup of Temporary Directories.
vm-test-run-update-hardware-configuration> target # [    9.672354] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    9.673320] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    9.676183] systemd[1]: Listening on Nix Daemon Socket.
vm-test-run-update-hardware-configuration> target # [    9.680107] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).
vm-test-run-update-hardware-configuration> target # [    9.681574] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.
vm-test-run-update-hardware-configuration> target # [    9.683035] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    9.683950] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    9.690091] systemd[1]: Started backdoor.service.
vm-test-run-update-hardware-configuration> target # [    9.694146] systemd[1]: Starting Import lastlog data into lastlog2 database...
vm-test-run-update-hardware-configuration> target # [    9.714084] systemd[1]: Starting Name Service Cache Daemon (nsncd)...
vm-test-run-update-hardware-configuration> target # [    9.920163] [drm] Found bochs VGA, ID 0xb0c5.
vm-test-run-update-hardware-configuration> target # [    9.920699] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
vm-test-run-update-hardware-configuration> target # [    9.728076] systemd[1]: Starting Post-Boot Actions...
vm-test-run-update-hardware-configuration> target # [    9.731079] systemd[1]: Started Reset console on configuration changes.
vm-test-run-update-hardware-configuration> target # [    9.931331] rtc_cmos PNP0B00:00: registered as rtc0
vm-test-run-update-hardware-configuration> target # [    9.738637] systemd[1]: Starting SSH Host Keys Generation...
vm-test-run-update-hardware-configuration> target # [    9.948293] rtc_cmos PNP0B00:00: setting system clock to 2026-10-19T12:54:33 UTC (1792414473)
vm-test-run-update-hardware-configuration> target # [    9.950599] systemd-journald[293]: Time jumped backwards, rotating.
vm-test-run-update-hardware-configuration> target # [    9.997046] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic
vm-test-run-update-hardware-configuration> target # [    9.997884] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0
vm-test-run-update-hardware-configuration> target # [    9.817883] systemd-resolved[321]: Clock change detected. Flushing caches.
vm-test-run-update-hardware-configuration> target # connecting to host...
vm-test-run-update-hardware-configuration> target # [    9.834216] systemd[1]: Starting D-Bus System Message Bus...
vm-test-run-update-hardware-configuration> target # [    9.847679] systemd[1]: Finished Post-Boot Actions.
vm-test-run-update-hardware-configuration> target # [    9.848965] nsncd[528]: Oct 19 12:54:33.586 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"
vm-test-run-update-hardware-configuration> target # [    9.861155] systemd[1]: Started Name Service Cache Daemon (nsncd).
vm-test-run-update-hardware-configuration> target # [    9.862501] systemd[1]: Reached target Host and Network Name Lookups.
vm-test-run-update-hardware-configuration> target # [   10.061957] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
vm-test-run-update-hardware-configuration> target # [    9.869956] systemd[1]: Reached target User and Group Name Lookups.
vm-test-run-update-hardware-configuration> target: Guest shell says: b'Spawning backdoor root shell...\n'
vm-test-run-update-hardware-configuration> target: connected to guest root shell
vm-test-run-update-hardware-configuration> target: (connecting took 3.61 seconds)
vm-test-run-update-hardware-configuration> target: (finished: waiting for the VM to finish booting, in 3.61 seconds)
vm-test-run-update-hardware-configuration> target # [    9.900650] systemd[1]: Starting User Login Management...
vm-test-run-update-hardware-configuration> target # [    9.910208] systemd[1]: Finished Import lastlog data into lastlog2 database.
vm-test-run-update-hardware-configuration> target # [   10.128206] cfg80211: Loading compiled-in X.509 certificates for regulatory database
vm-test-run-update-hardware-configuration> target # [   10.129553] parport_pc 00:02: reported by Plug and Play ACPI
vm-test-run-update-hardware-configuration> target # [   10.130354] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
vm-test-run-update-hardware-configuration> target # [    9.995873] dbus-broker-launch[534]: Looking up NSS user entry for 'systemd-timesync'...
vm-test-run-update-hardware-configuration> target # [   10.197909] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
vm-test-run-update-hardware-configuration> target # [   10.198674] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
vm-test-run-update-hardware-configuration> target # [   10.013767] dbus-broker-launch[534]: NSS returned no entry for 'systemd-timesync'
vm-test-run-update-hardware-configuration> target # [   10.015091] dbus-broker-launch[534]: Invalid user-name in /nix/store/5c4ly9c8g4jqzlljnhpsria7qpf4g13x-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"
vm-test-run-update-hardware-configuration> target # [   10.211711] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
vm-test-run-update-hardware-configuration> target # [   10.215491] cfg80211: failed to load regulatory.db
vm-test-run-update-hardware-configuration> target # [   10.056427] systemd[1]: Started D-Bus System Message Bus.
vm-test-run-update-hardware-configuration> target # [   10.076936] systemd-networkd[515]: lo: Link UP
vm-test-run-update-hardware-configuration> target # [   10.077946] systemd-networkd[515]: lo: Gained carrier
vm-test-run-update-hardware-configuration> target # [   10.085068] dbus-broker-launch[534]: Ready
vm-test-run-update-hardware-configuration> target # [   10.286214] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6
vm-test-run-update-hardware-configuration> target # [   10.287172] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5
vm-test-run-update-hardware-configuration> target # [   10.302802] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
vm-test-run-update-hardware-configuration> target # [   10.302908] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
vm-test-run-update-hardware-configuration> target # [   10.313389] Console: switching to colour frame buffer device 160x50
vm-test-run-update-hardware-configuration> target # [   10.332253] NET: Registered PF_PACKET protocol family
vm-test-run-update-hardware-configuration> target # [   10.498488] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device
vm-test-run-update-hardware-configuration> target # [   10.095289] systemd-networkd[515]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [   10.313085] systemd-networkd[515]: eth1: Configuring with /etc/systemd/network/40-eth1.network.
vm-test-run-update-hardware-configuration> target # [   10.314752] systemd-networkd[515]: eth0: Configuring with /etc/systemd/network/99-ethernet-default-dhcp.network.
vm-test-run-update-hardware-configuration> target # [   10.321264] systemd[1]: Started Network Management.
vm-test-run-update-hardware-configuration> target # [   10.324613] systemd-networkd[515]: eth1: Link UP
vm-test-run-update-hardware-configuration> target # [   10.330097] systemd[1]: Reached target Network.
vm-test-run-update-hardware-configuration> target # [   10.331086] systemd-networkd[515]: eth1: Gained carrier
vm-test-run-update-hardware-configuration> target # [   10.332273] systemd-networkd[515]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [   10.337420] systemd[1]: Starting Enable Persistent Storage in systemd-networkd...
vm-test-run-update-hardware-configuration> target # [   10.338696] systemd[1]: Starting Permit User Sessions...
vm-test-run-update-hardware-configuration> target # [   10.341150] systemd-networkd[515]: eth0: Link UP
vm-test-run-update-hardware-configuration> target # [   10.341980] systemd-networkd[515]: eth0: Gained carrier
vm-test-run-update-hardware-configuration> target # [   10.344690] systemd-networkd[515]: eth0: DHCPv4 address 10.0.2.15/24, gateway 10.0.2.2 acquired from 10.0.2.2
vm-test-run-update-hardware-configuration> target # [   10.346308] systemd[1]: Finished Permit User Sessions.
vm-test-run-update-hardware-configuration> target # [   10.347954] systemd[1]: Finished Enable Persistent Storage in systemd-networkd.
vm-test-run-update-hardware-configuration> target # [   10.349500] systemd[1]: Started Getty on tty1.
vm-test-run-update-hardware-configuration> target # [   10.352153] systemd[1]: Reached target Login Prompts.
vm-test-run-update-hardware-configuration> target # [   10.354663] systemd-logind[560]: New seat seat0.
vm-test-run-update-hardware-configuration> target # [   10.356258] systemd[1]: Started User Login Management.
vm-test-run-update-hardware-configuration> target # [   10.359199] systemd-logind[560]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)
vm-test-run-update-hardware-configuration> target # [   10.375147] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
vm-test-run-update-hardware-configuration> target # [   10.379069] systemd[1]: Starting linger-users.service...
vm-test-run-update-hardware-configuration> target # [   10.384076] systemd-logind[560]: Watching system buttons on /dev/input/event2 (Power Button)
vm-test-run-update-hardware-configuration> target # [   10.386318] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   10.616533] iTCO_wdt iTCO_wdt.0.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
vm-test-run-update-hardware-configuration> target # [   10.459263] systemd[1]: linger-users.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   10.465193] systemd[1]: Finished linger-users.service.
vm-test-run-update-hardware-configuration> target # [   10.473497] systemd-logind[560]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)
vm-test-run-update-hardware-configuration> target # [   10.678927] iTCO_wdt iTCO_wdt.0.auto: initialized. heartbeat=30 sec (nowayout=0)
vm-test-run-update-hardware-configuration> target # [   10.695105] ppdev: user-space parallel port driver
vm-test-run-update-hardware-configuration> target # [   10.576089] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   10.577978] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   10.588155] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   10.927839] kvm_amd: TSC scaling supported
vm-test-run-update-hardware-configuration> target # [   10.928367] kvm_amd: Nested Virtualization enabled
vm-test-run-update-hardware-configuration> target # [   10.930997] kvm_amd: Nested Paging enabled
vm-test-run-update-hardware-configuration> target # [   10.931504] kvm_amd: LBR virtualization supported
vm-test-run-update-hardware-configuration> target # [   10.933798] kvm_amd: Virtual GIF supported
vm-test-run-update-hardware-configuration> target # [   10.934320] kvm_amd: Virtual NMI enabled
vm-test-run-update-hardware-configuration> target # [   10.975860] EDAC MC: Ver: 3.0.0
vm-test-run-update-hardware-configuration> target # [   10.928975] sshd-keygen-start[565]: Generating public/private rsa key pair.
vm-test-run-update-hardware-configuration> target # [   10.930277] sshd-keygen-start[565]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key
vm-test-run-update-hardware-configuration> target # [   10.931805] sshd-keygen-start[565]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
vm-test-run-update-hardware-configuration> target # [   10.933245] sshd-keygen-start[565]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [   10.934204] sshd-keygen-start[565]: SHA256:j8/5pinCR+TABzhhwqE6e/nbQrLTp+WYDnkmq8onozI root@target
vm-test-run-update-hardware-configuration> target # [   10.935617] sshd-keygen-start[565]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [   10.937258] sshd-keygen-start[565]: +---[RSA 4096]----+
vm-test-run-update-hardware-configuration> target # [   10.938243] sshd-keygen-start[565]: | .o.oo           |
vm-test-run-update-hardware-configuration> target # [   10.939177] sshd-keygen-start[565]: | ..oo .          |
vm-test-run-update-hardware-configuration> target # [   10.940084] sshd-keygen-start[565]: |.    o .         |
vm-test-run-update-hardware-configuration> target # [   10.940985] sshd-keygen-start[565]: |.     o o        |
vm-test-run-update-hardware-configuration> target # [   10.941904] sshd-keygen-start[565]: |o      =S        |
vm-test-run-update-hardware-configuration> target # [   10.942894] sshd-keygen-start[565]: | o.o.   oo       |
vm-test-run-update-hardware-configuration> target # [   10.943817] sshd-keygen-start[565]: |. *=o.... .      |
vm-test-run-update-hardware-configuration> target # [   10.944798] sshd-keygen-start[565]: |E+oOo*+ oo o.    |
vm-test-run-update-hardware-configuration> target # [   10.945733] sshd-keygen-start[565]: |B+=oB=oo .*+.    |
vm-test-run-update-hardware-configuration> target # [   10.946667] sshd-keygen-start[565]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   10.968237] sshd-keygen-start[603]: Generating public/private ed25519 key pair.
vm-test-run-update-hardware-configuration> target # [   10.969598] sshd-keygen-start[603]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
vm-test-run-update-hardware-configuration> target # [   10.971152] sshd-keygen-start[603]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
vm-test-run-update-hardware-configuration> target # [   10.972660] sshd-keygen-start[603]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [   10.973618] sshd-keygen-start[603]: SHA256:pmhX/PZGWNUkNq2Vh1Uxsp7pTrttUj3VJyxI6GyRUHw root@target
vm-test-run-update-hardware-configuration> target # [   10.975052] sshd-keygen-start[603]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [   10.976080] sshd-keygen-start[603]: +--[ED25519 256]--+
vm-test-run-update-hardware-configuration> target # [   10.976955] sshd-keygen-start[603]: |      .+.o   .+OB|
vm-test-run-update-hardware-configuration> target # [   10.977955] sshd-keygen-start[603]: |        = E  .=+*|
vm-test-run-update-hardware-configuration> target # [   10.978867] sshd-keygen-start[603]: |       o + . + oo|
vm-test-run-update-hardware-configuration> target # [   10.979790] sshd-keygen-start[603]: |       .+ . + * +|
vm-test-run-update-hardware-configuration> target # [   10.980708] sshd-keygen-start[603]: |       .S  o = .+|
vm-test-run-update-hardware-configuration> target # [   10.981639] sshd-keygen-start[603]: |     . + .. o  o.|
vm-test-run-update-hardware-configuration> target # [   10.982633] sshd-keygen-start[603]: |    o o   o. o. .|
vm-test-run-update-hardware-configuration> target # [   10.983558] sshd-keygen-start[603]: |   . .   . .+.o. |
vm-test-run-update-hardware-configuration> target # [   10.984466] sshd-keygen-start[603]: |           ..++. |
vm-test-run-update-hardware-configuration> target # [   10.985384] sshd-keygen-start[603]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   10.988223] systemd[1]: sshd-keygen.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   10.990437] systemd[1]: Finished SSH Host Keys Generation.
vm-test-run-update-hardware-configuration> target # [   10.994598] systemd[1]: Starting SSH Daemon...
vm-test-run-update-hardware-configuration> target # [   11.016339] sshd[605]: Server listening on 0.0.0.0 port 22.
vm-test-run-update-hardware-configuration> target # [   11.017839] sshd[605]: Server listening on :: port 22.
vm-test-run-update-hardware-configuration> target # [   11.019588] systemd[1]: Started SSH Daemon.
vm-test-run-update-hardware-configuration> target # [   11.020814] systemd[1]: Reached target Multi-User System.
vm-test-run-update-hardware-configuration> target # [   11.053639] systemd-vconsole-setup[595]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [   11.057323] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   11.061124] systemd[1]: Startup finished in 989ms (kernel) + 6.155s (initrd) + 3.915s (userspace) = 11.060s.
vm-test-run-update-hardware-configuration> target # [   11.129512] systemd-networkd[515]: eth1: Gained IPv6LL
vm-test-run-update-hardware-configuration> target # Connection to localhost (::1) 22 port [tcp/ssh] succeeded!
vm-test-run-update-hardware-configuration> target: (finished: waiting for TCP port 22 on localhost, in 4.88 seconds)
vm-test-run-update-hardware-configuration> Setting up port forwarding from host port 52131 to guest port 22
vm-test-run-update-hardware-configuration> target # [   11.147954] sshd-session[611]: Connection closed by ::1 port 35890 [preauth]
vm-test-run-update-hardware-configuration> target # [   11.642089] systemd-networkd[515]: eth0: Gained IPv6LL
vm-test-run-update-hardware-configuration> Host port 52131 is now listening
vm-test-run-update-hardware-configuration> target # [   13.151597] sshd-session[613]: Connection closed by 10.0.2.2 port 59246 [preauth]
vm-test-run-update-hardware-configuration> target # [   22.643371] sshd-session[618]: Accepted publickey for nonrootuser from 10.0.2.2 port 39268 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   22.650664] sshd-session[618]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   22.666825] systemd[1]: Created slice Slice /user/1000.
vm-test-run-update-hardware-configuration> target # [   22.669439] systemd[1]: Starting User Runtime Directory /run/user/1000...
vm-test-run-update-hardware-configuration> target # [   22.683882] systemd-logind[560]: New session '1' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   22.698152] systemd[1]: Finished User Runtime Directory /run/user/1000.
vm-test-run-update-hardware-configuration> target # [   22.700798] systemd[1]: Starting User Manager for UID 1000...
vm-test-run-update-hardware-configuration> target # [   22.717267] (systemd)[624]: pam_unix(systemd-user:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   22.722067] systemd-logind[560]: New session '2' of user 'nonrootuser' with class 'manager' and type 'unspecified'.
vm-test-run-update-hardware-configuration> target # [   22.739243] systemd[624]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   22.848376] systemd[624]: Queued start job for default target Main User Target.
vm-test-run-update-hardware-configuration> target # [   22.851913] systemd[624]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   22.854883] systemd[624]: Created slice User Application Slice.
vm-test-run-update-hardware-configuration> target # [   22.856191] systemd[624]: Started Daily Cleanup of User's Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   22.858366] systemd[624]: Reached target Paths.
vm-test-run-update-hardware-configuration> target # [   22.859403] systemd[624]: Reached target Timers.
vm-test-run-update-hardware-configuration> target # [   22.862109] systemd[624]: Starting D-Bus User Message Bus Socket...
vm-test-run-update-hardware-configuration> target # [   22.864336] systemd[624]: Starting Create User Files and Directories...
vm-test-run-update-hardware-configuration> target # [   22.886953] systemd[624]: Finished Create User Files and Directories.
vm-test-run-update-hardware-configuration> target # [   22.894967] systemd[624]: Listening on D-Bus User Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   22.897459] systemd[624]: Reached target Sockets.
vm-test-run-update-hardware-configuration> target # [   22.898382] systemd[624]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   22.899340] systemd[1]: Started User Manager for UID 1000.
vm-test-run-update-hardware-configuration> target # [   22.902686] systemd[624]: Starting Run user-specific NixOS activation...
vm-test-run-update-hardware-configuration> target # [   22.906145] systemd[1]: Started Session 1 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   22.931478] systemd[624]: Finished Run user-specific NixOS activation.
vm-test-run-update-hardware-configuration> target # [   22.932935] systemd[624]: Reached target Main User Target.
vm-test-run-update-hardware-configuration> target # [   22.934190] systemd[624]: Startup finished in 199ms.
vm-test-run-update-hardware-configuration> target # [   22.976306] sudo[646]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-facter
vm-test-run-update-hardware-configuration> target # [   22.982782] sudo[646]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   23.260429] sr 2:0:0:0: Attached scsi generic sg0 type 5
vm-test-run-update-hardware-configuration> target # [   23.179835] sudo[646]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   23.188709] sshd-session[637]: Received disconnect from 10.0.2.2 port 39268:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   23.190222] sshd-session[637]: Disconnected from user nonrootuser 10.0.2.2 port 39268
vm-test-run-update-hardware-configuration> target # [   23.191757] sshd-session[618]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   23.196158] systemd-logind[560]: Session 1 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> target # [   33.147208] sshd-session[676]: Accepted publickey for nonrootuser from 10.0.2.2 port 42852 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   33.153577] sshd-session[676]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   33.159291] systemd-logind[560]: New session '3' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   33.162748] systemd[1]: Started Session 3 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   33.213914] sudo[686]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-generate-config --no-filesystems --show-hardware-config
vm-test-run-update-hardware-configuration> target # [   33.221264] sudo[686]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   33.361158] sudo[686]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   33.369539] sshd-session[679]: Received disconnect from 10.0.2.2 port 42852:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   33.371072] sshd-session[679]: Disconnected from user nonrootuser 10.0.2.2 port 42852
vm-test-run-update-hardware-configuration> target # [   33.372726] sshd-session[676]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   33.376968] systemd-logind[560]: Session 3 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> (finished: run the VM test script, in 34.83 seconds)
vm-test-run-update-hardware-configuration> test script finished in 35.44s
vm-test-run-update-hardware-configuration> cleanup
vm-test-run-update-hardware-configuration> kill QemuMachine (pid 45)
vm-test-run-update-hardware-configuration> target # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/lb41b0anx1f98y9y5s9mdv97gjgsq740-python3-3.14.7/bin/python3.14)
vm-test-run-update-hardware-configuration> target # [2026-10-19T12:54:58Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-10-19T12:54:58Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-10-19T12:54:58Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> (finished: cleanup, in 0.13 seconds)