these 5 derivations will be built:
  /nix/store/7r8s17vf0m7sp1xz3gwlsw45pyzx2gkk-clan-cli.drv
  /nix/store/h7c48kncfrn0r8hxnb0kg5qpvf2gjd99-test-script.drv
  /nix/store/10zqf4ri9vx2mf7vy20ciw5w0jbnr5g7-driverConfiguration.json.drv
  /nix/store/dw1qdihb5jpvrp1sgq8fprq9vkcv3qhk-nixos-test-driver-update-hardware-configuration.drv
  /nix/store/62sjfm5wzk3ndrsw33pwhn8vl9rph498-vm-test-run-update-hardware-configuration.drv
building '/nix/store/h7c48kncfrn0r8hxnb0kg5qpvf2gjd99-test-script.drv'
building '/nix/store/10zqf4ri9vx2mf7vy20ciw5w0jbnr5g7-driverConfiguration.json.drv'
driverConfiguration.json> structuredAttrs is enabled
building '/nix/store/dw1qdihb5jpvrp1sgq8fprq9vkcv3qhk-nixos-test-driver-update-hardware-configuration.drv'
nixos-test-driver-update-hardware-configuration> Running type check (enable/disable: config.skipTypeCheck)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck
nixos-test-driver-update-hardware-configuration> All checks passed!
nixos-test-driver-update-hardware-configuration> Linting test script (enable/disable: config.skipLint)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint
nixos-test-driver-update-hardware-configuration> All checks passed!
building '/nix/store/62sjfm5wzk3ndrsw33pwhn8vl9rph498-vm-test-run-update-hardware-configuration.drv'
vm-test-run-update-hardware-configuration> Machine state will be reset. To keep it, pass --keep-machine-state
vm-test-run-update-hardware-configuration> start all VLans
vm-test-run-update-hardware-configuration> (finished: start all VLans, in 0.00 seconds)
vm-test-run-update-hardware-configuration> Test will time out and terminate in 3600.0 seconds
vm-test-run-update-hardware-configuration> run the VM test script
vm-test-run-update-hardware-configuration> additionally exposed symbols:
vm-test-run-update-hardware-configuration>     target,
vm-test-run-update-hardware-configuration>     vlan1,
vm-test-run-update-hardware-configuration>     start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh
vm-test-run-update-hardware-configuration> target: starting vm
vm-test-run-update-hardware-configuration> target # Disk image does not exist, creating the virtualisation disk image...
vm-test-run-update-hardware-configuration> target # Formatting '/build/vm-state-target/tmp.n0hcPnpAsc', fmt=raw size=8589934592
vm-test-run-update-hardware-configuration> target # mke2fs 1.47.4 (6-Mar-2025)
vm-test-run-update-hardware-configuration> target # Discarding device blocks:       0/2097152               done
vm-test-run-update-hardware-configuration> target # Creating filesystem with 2097152 4k blocks and 524288 inodes
vm-test-run-update-hardware-configuration> target # Filesystem UUID: fc155e9b-bcc9-4bac-b728-a3658f24ee80
vm-test-run-update-hardware-configuration> target # Superblock backups stored on blocks:
vm-test-run-update-hardware-configuration> target # 	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Allocating group tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Writing inode tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Creating journal (16384 blocks): done
vm-test-run-update-hardware-configuration> target # Writing superblocks and filesystem accounting information:  0/64     done
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Virtualisation disk image created.
vm-test-run-update-hardware-configuration> target # Formatting 'empty0.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=536870912 lazy_refcounts=off refcount_bits=16
vm-test-run-update-hardware-configuration> target: QEMU running (pid 45)
vm-test-run-update-hardware-configuration> target # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC550+7EF2C550 CA00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:02.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:09.0 CB00 PCI2.10 PnP PMM 7EFCC550 7EF2C550 CB00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:09.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Booting from ROM...
vm-test-run-update-hardware-configuration> target # Probing EDD (edd=off to disable)... o[    0.000000] Linux version 6.18.49 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Wed Sep  2 12:31:51 UTC 2026
vm-test-run-update-hardware-configuration> target # [    0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/5kjwhphj8smxlmc9xhbsz4apxgxyd6zf-nixos-system-target-test/init regInfo=/nix/store/svqphvdbz457l58cdkjzpjfj4pa8h330-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-provided physical RAM map:
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd4fff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000007ffd5000-0x000000007fffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013e7fffff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] NX (Execute Disable) protection: active
vm-test-run-update-hardware-configuration> target # [    0.000000] APIC: Static calls initialized
vm-test-run-update-hardware-configuration> target # [    0.000000] SMBIOS 2.8 present.
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: Memory slots populated: 1/1
vm-test-run-update-hardware-configuration> target # [    0.000000] Hypervisor detected: KVM
vm-test-run-update-hardware-configuration> target # [    0.000000] last_pfn = 0x7ffd5 max_arch_pfn = 0x10000000000
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
vm-test-run-update-hardware-configuration> target # [    0.000001] kvm-clock: using sched offset of 609455013 cycles
vm-test-run-update-hardware-configuration> target # [    0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
vm-test-run-update-hardware-configuration> target # [    0.000007] tsc: Detected 2749.996 MHz processor
vm-test-run-update-hardware-configuration> target # [    0.001169] last_pfn = 0x13e800 max_arch_pfn = 0x10000000000
vm-test-run-update-hardware-configuration> target # [    0.001216] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
vm-test-run-update-hardware-configuration> target # [    0.001219] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
vm-test-run-update-hardware-configuration> target # [    0.001273] last_pfn = 0x7ffd5 max_arch_pfn = 0x10000000000
vm-test-run-update-hardware-configuration> target # [    0.003960] found SMP MP-table at [mem 0x000f5450-0x000f545f]
vm-test-run-update-hardware-configuration> target # [    0.003981] Using GB pages for direct mapping
vm-test-run-update-hardware-configuration> target # [    0.004166] RAMDISK: [mem 0x7e369000-0x7ffcffff]
vm-test-run-update-hardware-configuration> target # [    0.004173] ACPI: Early table checksum verification disabled
vm-test-run-update-hardware-configuration> target # [    0.004176] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS )
vm-test-run-update-hardware-configuration> target # [    0.004181] ACPI: RSDT 0x000000007FFE2433 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.004187] ACPI: FACP 0x000000007FFE222B 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.004196] ACPI: DSDT 0x000000007FFE0040 0021EB (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.004200] ACPI: FACS 0x000000007FFE0000 000040
vm-test-run-update-hardware-configuration> target # [    0.004203] ACPI: APIC 0x000000007FFE231F 000078 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.004205] ACPI: HPET 0x000000007FFE2397 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.004215] ACPI: MCFG 0x000000007FFE23CF 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.004218] ACPI: WAET 0x000000007FFE240B 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.004220] ACPI: Reserving FACP table memory at [mem 0x7ffe222b-0x7ffe231e]
vm-test-run-update-hardware-configuration> target # [    0.004222] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe222a]
vm-test-run-update-hardware-configuration> target # [    0.004223] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
vm-test-run-update-hardware-configuration> target # [    0.004224] ACPI: Reserving APIC table memory at [mem 0x7ffe231f-0x7ffe2396]
vm-test-run-update-hardware-configuration> target # [    0.004224] ACPI: Reserving HPET table memory at [mem 0x7ffe2397-0x7ffe23ce]
vm-test-run-update-hardware-configuration> target # [    0.004225] ACPI: Reserving MCFG table memory at [mem 0x7ffe23cf-0x7ffe240a]
vm-test-run-update-hardware-configuration> target # [    0.004226] ACPI: Reserving WAET table memory at [mem 0x7ffe240b-0x7ffe2432]
vm-test-run-update-hardware-configuration> target # [    0.004724] No NUMA configuration found
vm-test-run-update-hardware-configuration> target # [    0.004726] Faking a node at [mem 0x0000000000000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.004731] NODE_DATA(0) allocated [mem 0x13e7f8780-0x13e7fdcff]
vm-test-run-update-hardware-configuration> target # [    0.007634] Zone ranges:
vm-test-run-update-hardware-configuration> target # [    0.007635]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
vm-test-run-update-hardware-configuration> target # [    0.007637]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
vm-test-run-update-hardware-configuration> target # [    0.007639]   Normal   [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.007640]   Device   empty
vm-test-run-update-hardware-configuration> target # [    0.007641] Movable zone start for each node
vm-test-run-update-hardware-configuration> target # [    0.007642] Early memory node ranges
vm-test-run-update-hardware-configuration> target # [    0.007643]   node   0: [mem 0x0000000000001000-0x000000000009efff]
vm-test-run-update-hardware-configuration> target # [    0.007644]   node   0: [mem 0x0000000000100000-0x000000007ffd4fff]
vm-test-run-update-hardware-configuration> target # [    0.007646]   node   0: [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.007647] Initmem setup node 0 [mem 0x0000000000001000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.007671] On node 0, zone DMA: 1 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.008013] On node 0, zone DMA: 97 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.071922] On node 0, zone Normal: 43 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.072355] On node 0, zone Normal: 6144 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.073511] ACPI: PM-Timer IO Port: 0x608
vm-test-run-update-hardware-configuration> target # [    0.073528] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
vm-test-run-update-hardware-configuration> target # [    0.073563] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
vm-test-run-update-hardware-configuration> target # [    0.073566] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
vm-test-run-update-hardware-configuration> target # [    0.073568] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
vm-test-run-update-hardware-configuration> target # [    0.073570] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
vm-test-run-update-hardware-configuration> target # [    0.073571] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
vm-test-run-update-hardware-configuration> target # [    0.073572] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
vm-test-run-update-hardware-configuration> target # [    0.073575] ACPI: Using ACPI (MADT) for SMP configuration information
vm-test-run-update-hardware-configuration> target # [    0.073576] ACPI: HPET id: 0x8086a201 base: 0xfed00000
vm-test-run-update-hardware-configuration> target # [    0.073582] TSC deadline timer available
vm-test-run-update-hardware-configuration> target # [    0.073588] CPU topo: Max. logical packages:   1
vm-test-run-update-hardware-configuration> target # [    0.073588] CPU topo: Max. logical dies:       1
vm-test-run-update-hardware-configuration> target # [    0.073589] CPU topo: Max. dies per package:   1
vm-test-run-update-hardware-configuration> target # [    0.073593] CPU topo: Max. threads per core:   1
vm-test-run-update-hardware-configuration> target # [    0.073593] CPU topo: Num. cores per package:     1
vm-test-run-update-hardware-configuration> target # [    0.073594] CPU topo: Num. threads per package:   1
vm-test-run-update-hardware-configuration> target # [    0.073594] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs
vm-test-run-update-hardware-configuration> target # [    0.073618] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
vm-test-run-update-hardware-configuration> target # [    0.073652] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
vm-test-run-update-hardware-configuration> target # [    0.073654] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
vm-test-run-update-hardware-configuration> target # [    0.073655] PM: hibernation: Registered nosave memory: [mem 0x7ffd5000-0xffffffff]
vm-test-run-update-hardware-configuration> target # [    0.073657] [mem 0xc0000000-0xfed1bfff] available for PCI devices
vm-test-run-update-hardware-configuration> target # [    0.073658] Booting paravirtualized kernel on KVM
vm-test-run-update-hardware-configuration> target # [    0.073662] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
vm-test-run-update-hardware-configuration> target # [    0.078180] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
vm-test-run-update-hardware-configuration> target # [    0.080461] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152
vm-test-run-update-hardware-configuration> target # [    0.080511] kvm-guest: PV spinlocks disabled, single CPU
vm-test-run-update-hardware-configuration> target # [    0.080513] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/5kjwhphj8smxlmc9xhbsz4apxgxyd6zf-nixos-system-target-test/init regInfo=/nix/store/svqphvdbz457l58cdkjzpjfj4pa8h330-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.080610] Unknown kernel command line parameters "regInfo=/nix/store/svqphvdbz457l58cdkjzpjfj4pa8h330-closure-info/registration", will be passed to user space.
vm-test-run-update-hardware-configuration> target # [    0.080624] random: crng init done
vm-test-run-update-hardware-configuration> target # [    0.080625] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
vm-test-run-update-hardware-configuration> target # [    0.085255] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.087439] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.087476] software IO TLB: area num 1.
vm-test-run-update-hardware-configuration> target # [    0.161502] Fallback order for Node 0: 0
vm-test-run-update-hardware-configuration> target # [    0.161511] Built 1 zonelists, mobility grouping on.  Total pages: 780147
vm-test-run-update-hardware-configuration> target # [    0.161514] Policy zone: Normal
vm-test-run-update-hardware-configuration> target # [    0.163986] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
vm-test-run-update-hardware-configuration> target # [    0.169567] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
vm-test-run-update-hardware-configuration> target # [    0.176870] allocated 6291456 bytes of page_ext
vm-test-run-update-hardware-configuration> target # [    0.187883] ftrace: allocating 48732 entries in 192 pages
vm-test-run-update-hardware-configuration> target # [    0.187888] ftrace: allocated 192 pages with 2 groups
vm-test-run-update-hardware-configuration> target # [    0.188942] Dynamic Preempt: lazy
vm-test-run-update-hardware-configuration> target # [    0.189177] rcu: Preemptible hierarchical RCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.189178] rcu: 	RCU event tracing is enabled.
vm-test-run-update-hardware-configuration> target # [    0.189179] rcu: 	RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.189181] 	Trampoline variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.189181] 	Rude variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.189182] 	Tracing variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.189183] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
vm-test-run-update-hardware-configuration> target # [    0.189184] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
vm-test-run-update-hardware-configuration> target # [    0.189221] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.189223] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.189224] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.194953] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16
vm-test-run-update-hardware-configuration> target # [    0.195278] rcu: srcu_init: Setting srcu_struct sizes based on contention.
vm-test-run-update-hardware-configuration> target # [    0.195287] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
vm-test-run-update-hardware-configuration> target # [    0.195434] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
vm-test-run-update-hardware-configuration> target # [    0.203061] Console: colour VGA+ 80x25
vm-test-run-update-hardware-configuration> target # [    0.203065] printk: legacy console [tty0] enabled
vm-test-run-update-hardware-configuration> target # [    0.252799] printk: legacy console [ttyS0] enabled
vm-test-run-update-hardware-configuration> target # [    0.449574] ACPI: Core revision 20250807
vm-test-run-update-hardware-configuration> target # [    0.451187] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
vm-test-run-update-hardware-configuration> target # [    0.453834] APIC: Switch to symmetric I/O mode setup
vm-test-run-update-hardware-configuration> target # [    0.455456] x2apic enabled
vm-test-run-update-hardware-configuration> target # [    0.456772] APIC: Switched APIC routing to: physical x2apic
vm-test-run-update-hardware-configuration> target # [    0.459779] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
vm-test-run-update-hardware-configuration> target # [    0.461573] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bbc354b, max_idle_ns: 440795297204 ns
vm-test-run-update-hardware-configuration> target # [    0.464510] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749996)
vm-test-run-update-hardware-configuration> target # [    0.466623] x86/cpu: User Mode Instruction Prevention (UMIP) activated
vm-test-run-update-hardware-configuration> target # [    0.467674] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
vm-test-run-update-hardware-configuration> target # [    0.468508] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
vm-test-run-update-hardware-configuration> target # [    0.469515] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
vm-test-run-update-hardware-configuration> target # [    0.471509] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
vm-test-run-update-hardware-configuration> target # [    0.472509] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
vm-test-run-update-hardware-configuration> target # [    0.473509] Speculative Return Stack Overflow: Mitigation: Safe RET
vm-test-run-update-hardware-configuration> target # [    0.474508] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
vm-test-run-update-hardware-configuration> target # [    0.475520] Spectre V2 : Enabling IBPB for BPF
vm-test-run-update-hardware-configuration> target # [    0.476510] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
vm-test-run-update-hardware-configuration> target # [    0.478509] active return thunk: srso_alias_return_thunk
vm-test-run-update-hardware-configuration> target # [    0.479533] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
vm-test-run-update-hardware-configuration> target # [    0.480508] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
vm-test-run-update-hardware-configuration> target # [    0.481508] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
vm-test-run-update-hardware-configuration> target # [    0.482508] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
vm-test-run-update-hardware-configuration> target # [    0.483508] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
vm-test-run-update-hardware-configuration> target # [    0.485508] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
vm-test-run-update-hardware-configuration> target # [    0.486509] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
vm-test-run-update-hardware-configuration> target # [    0.487508] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
vm-test-run-update-hardware-configuration> target # [    0.488508] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
vm-test-run-update-hardware-configuration> target # [    0.490509] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
vm-test-run-update-hardware-configuration> target # [    0.491509] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
vm-test-run-update-hardware-configuration> target # [    0.493507] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
vm-test-run-update-hardware-configuration> target # [    0.494509] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
vm-test-run-update-hardware-configuration> target # [    0.495509] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
vm-test-run-update-hardware-configuration> target # [    0.497508] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16
vm-test-run-update-hardware-configuration> target # [    0.498508] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]:   24
vm-test-run-update-hardware-configuration> target # [    0.499509] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.
vm-test-run-update-hardware-configuration> target # [    0.537751] Freeing SMP alternatives memory: 44K
vm-test-run-update-hardware-configuration> target # [    0.538511] pid_max: default: 32768 minimum: 301
vm-test-run-update-hardware-configuration> target # [    0.539586] LSM: initializing lsm=capability,landlock,yama,bpf,ima
vm-test-run-update-hardware-configuration> target # [    0.541635] landlock: Up and running.
vm-test-run-update-hardware-configuration> target # [    0.542508] Yama: becoming mindful.
vm-test-run-update-hardware-configuration> target # [    0.544663] LSM support for eBPF active
vm-test-run-update-hardware-configuration> target # [    0.545679] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.546588] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.549214] smpboot: CPU0: AMD EPYC 9454P 48-Core Processor (family: 0x19, model: 0x11, stepping: 0x1)
vm-test-run-update-hardware-configuration> target # [    0.550026] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
vm-test-run-update-hardware-configuration> target # [    0.550511] ... version:                   2
vm-test-run-update-hardware-configuration> target # [    0.551509] ... bit width:                 48
vm-test-run-update-hardware-configuration> target # [    0.552522] ... generic counters:          6
vm-test-run-update-hardware-configuration> target # [    0.553510] ... generic bitmap:            000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.554510] ... fixed-purpose counters:    0
vm-test-run-update-hardware-configuration> target # [    0.555509] ... fixed-purpose bitmap:      0000000000000000
vm-test-run-update-hardware-configuration> target # [    0.556510] ... value mask:                0000ffffffffffff
vm-test-run-update-hardware-configuration> target # [    0.557510] ... max period:                00007fffffffffff
vm-test-run-update-hardware-configuration> target # [    0.558510] ... global_ctrl mask:          000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.559654] signal: max sigframe size: 3376
vm-test-run-update-hardware-configuration> target # [    0.560694] rcu: Hierarchical SRCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.561517] rcu: 	Max phase no-delay instances is 400.
vm-test-run-update-hardware-configuration> target # [    0.567609] smp: Bringing up secondary CPUs ...
vm-test-run-update-hardware-configuration> target # [    0.568522] smp: Brought up 1 node, 1 CPU
vm-test-run-update-hardware-configuration> target # [    0.569520] smpboot: Total of 1 processors activated (5499.99 BogoMIPS)
vm-test-run-update-hardware-configuration> target # [    0.570715] Memory: 2904912K/3120588K available (17215K kernel code, 2726K rwdata, 13584K rodata, 3644K init, 2988K bss, 203300K reserved, 0K cma-reserved)
vm-test-run-update-hardware-configuration> target # [    0.571859] devtmpfs: initialized
vm-test-run-update-hardware-configuration> target # [    0.572860] x86/mm: Memory block size: 128MB
vm-test-run-update-hardware-configuration> target # [    0.575179] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.576550] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).
vm-test-run-update-hardware-configuration> target # [    0.577624] pinctrl core: initialized pinctrl subsystem
vm-test-run-update-hardware-configuration> target # [    0.578934] PM: RTC time: 15:03:34, date: 2026-09-04
vm-test-run-update-hardware-configuration> target # [    0.582742] NET: Registered PF_NETLINK/PF_ROUTE protocol family
vm-test-run-update-hardware-configuration> target # [    0.584328] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.585541] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.587148] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.588526] audit: initializing netlink subsys (disabled)
vm-test-run-update-hardware-configuration> target # [    0.589925] thermal_sys: Registered thermal governor 'fair_share'
vm-test-run-update-hardware-configuration> target # [    0.589928] thermal_sys: Registered thermal governor 'bang_bang'
vm-test-run-update-hardware-configuration> target # [    0.590516] audit: type=2000 audit(1788534214.464:1): state=initialized audit_enabled=0 res=1
vm-test-run-update-hardware-configuration> target # [    0.592531] thermal_sys: Registered thermal governor 'step_wise'
vm-test-run-update-hardware-configuration> target # [    0.592535] thermal_sys: Registered thermal governor 'user_space'
vm-test-run-update-hardware-configuration> target # [    0.593513] thermal_sys: Registered thermal governor 'power_allocator'
vm-test-run-update-hardware-configuration> target # [    0.594556] cpuidle: using governor menu
vm-test-run-update-hardware-configuration> target # [    0.597775] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vm-test-run-update-hardware-configuration> target # [    0.598875] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.599514] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
vm-test-run-update-hardware-configuration> target # [    0.600530] PCI: Using configuration type 1 for base access
vm-test-run-update-hardware-configuration> target # [    0.601798] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
vm-test-run-update-hardware-configuration> target # [    0.611553] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.612511] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
vm-test-run-update-hardware-configuration> target # [    0.615514] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.616511] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
vm-test-run-update-hardware-configuration> target # [    0.626963] ACPI: Added _OSI(Module Device)
vm-test-run-update-hardware-configuration> target # [    0.627512] ACPI: Added _OSI(Processor Device)
vm-test-run-update-hardware-configuration> target # [    0.632511] ACPI: Added _OSI(Processor Aggregator Device)
vm-test-run-update-hardware-configuration> target # [    0.642575] ACPI: 1 ACPI AML tables successfully acquired and loaded
vm-test-run-update-hardware-configuration> target # [    0.647011] ACPI: Interpreter enabled
vm-test-run-update-hardware-configuration> target # [    0.647533] ACPI: PM: (supports S0 S3 S4 S5)
vm-test-run-update-hardware-configuration> target # [    0.650511] ACPI: Using IOAPIC for interrupt routing
vm-test-run-update-hardware-configuration> target # [    0.651613] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
vm-test-run-update-hardware-configuration> target # [    0.654511] PCI: Using E820 reservations for host bridge windows
vm-test-run-update-hardware-configuration> target # [    0.655767] ACPI: Enabled 2 GPEs in block 00 to 3F
vm-test-run-update-hardware-configuration> target # [    0.664973] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
vm-test-run-update-hardware-configuration> target # [    0.665517] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
vm-test-run-update-hardware-configuration> target # [    0.666611] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]
vm-test-run-update-hardware-configuration> target # [    0.667672] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
vm-test-run-update-hardware-configuration> target # [    0.669169] PCI host bridge to bus 0000:00
vm-test-run-update-hardware-configuration> target # [    0.669519] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.670512] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.671512] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.672512] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.673513] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.674512] pci_bus 0000:00: root bus resource [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.675513] pci_bus 0000:00: root bus resource [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.676721] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.678459] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.681609] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
vm-test-run-update-hardware-configuration> target # [    0.682541] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
vm-test-run-update-hardware-configuration> target # [    0.683568] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
vm-test-run-update-hardware-configuration> target # [    0.684770] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
vm-test-run-update-hardware-configuration> target # [    0.686775] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.689547] pci 0000:00:02.0: BAR 0 [io  0xc1c0-0xc1df]
vm-test-run-update-hardware-configuration> target # [    0.690550] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
vm-test-run-update-hardware-configuration> target # [    0.691566] pci 0000:00:02.0: BAR 4 [mem 0xe0000000000-0xe0000003fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.692526] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]
vm-test-run-update-hardware-configuration> target # [    0.695018] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.698532] pci 0000:00:03.0: BAR 0 [io  0xc1e0-0xc1ff]
vm-test-run-update-hardware-configuration> target # [    0.699526] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
vm-test-run-update-hardware-configuration> target # [    0.700566] pci 0000:00:03.0: BAR 4 [mem 0xe0000004000-0xe0000007fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.702871] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.705526] pci 0000:00:04.0: BAR 0 [io  0xc100-0xc13f]
vm-test-run-update-hardware-configuration> target # [    0.706525] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
vm-test-run-update-hardware-configuration> target # [    0.707567] pci 0000:00:04.0: BAR 4 [mem 0xe0000008000-0xe000000bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.709829] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.712527] pci 0000:00:05.0: BAR 0 [io  0xc200-0xc21f]
vm-test-run-update-hardware-configuration> target # [    0.713974] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]
vm-test-run-update-hardware-configuration> target # [    0.714566] pci 0000:00:05.0: BAR 4 [mem 0xe000000c000-0xe000000ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.717104] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.720567] pci 0000:00:06.0: BAR 0 [io  0xc220-0xc23f]
vm-test-run-update-hardware-configuration> target # [    0.721527] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]
vm-test-run-update-hardware-configuration> target # [    0.722563] pci 0000:00:06.0: BAR 4 [mem 0xe0000010000-0xe0000013fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.724832] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.727525] pci 0000:00:07.0: BAR 0 [io  0xc000-0xc07f]
vm-test-run-update-hardware-configuration> target # [    0.728526] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]
vm-test-run-update-hardware-configuration> target # [    0.729566] pci 0000:00:07.0: BAR 4 [mem 0xe0000014000-0xe0000017fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.732043] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.735544] pci 0000:00:08.0: BAR 0 [io  0xc080-0xc0ff]
vm-test-run-update-hardware-configuration> target # [    0.736526] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]
vm-test-run-update-hardware-configuration> target # [    0.737560] pci 0000:00:08.0: BAR 4 [mem 0xe0000018000-0xe000001bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.739752] pci 0000:00:09.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.743468] pci 0000:00:09.0: BAR 0 [io  0xc240-0xc25f]
vm-test-run-update-hardware-configuration> target # [    0.744540] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]
vm-test-run-update-hardware-configuration> target # [    0.745561] pci 0000:00:09.0: BAR 4 [mem 0xe000001c000-0xe000001ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.746527] pci 0000:00:09.0: ROM [mem 0xfeb80000-0xfebbffff pref]
vm-test-run-update-hardware-configuration> target # [    0.748762] pci 0000:00:0a.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.751539] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]
vm-test-run-update-hardware-configuration> target # [    0.752566] pci 0000:00:0a.0: BAR 4 [mem 0xe0000020000-0xe0000023fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.754882] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.757550] pci 0000:00:0b.0: BAR 0 [io  0xc140-0xc17f]
vm-test-run-update-hardware-configuration> target # [    0.758527] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]
vm-test-run-update-hardware-configuration> target # [    0.759567] pci 0000:00:0b.0: BAR 4 [mem 0xe0000024000-0xe0000027fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.762048] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.765539] pci 0000:00:0c.0: BAR 0 [io  0xc260-0xc27f]
vm-test-run-update-hardware-configuration> target # [    0.766525] pci 0000:00:0c.0: BAR 1 [mem 0xfebdb000-0xfebdbfff]
vm-test-run-update-hardware-configuration> target # [    0.767571] pci 0000:00:0c.0: BAR 4 [mem 0xe0000028000-0xe000002bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.770034] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.771569] pci 0000:00:1d.0: BAR 4 [io  0xc280-0xc29f]
vm-test-run-update-hardware-configuration> target # [    0.772917] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.775321] pci 0000:00:1d.1: BAR 4 [io  0xc2a0-0xc2bf]
vm-test-run-update-hardware-configuration> target # [    0.776878] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.778586] pci 0000:00:1d.2: BAR 4 [io  0xc2c0-0xc2df]
vm-test-run-update-hardware-configuration> target # [    0.779956] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.781524] pci 0000:00:1d.7: BAR 0 [mem 0xfebdc000-0xfebdcfff]
vm-test-run-update-hardware-configuration> target # [    0.782978] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.784146] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
vm-test-run-update-hardware-configuration> target # [    0.785966] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.788356] pci 0000:00:1f.2: BAR 4 [io  0xc2e0-0xc2ff]
vm-test-run-update-hardware-configuration> target # [    0.789526] pci 0000:00:1f.2: BAR 5 [mem 0xfebdd000-0xfebddfff]
vm-test-run-update-hardware-configuration> target # [    0.791514] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.794281] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
vm-test-run-update-hardware-configuration> target # [    0.802582] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.803699] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.804719] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.805700] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.806693] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.807792] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.808699] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.809693] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.810586] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.811541] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.812573] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.813534] ACPI: PCI: Interrupt link GSID configured for IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.814542] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
vm-test-run-update-hardware-configuration> target # [    0.815532] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
vm-test-run-update-hardware-configuration> target # [    0.816539] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
vm-test-run-update-hardware-configuration> target # [    0.817535] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
vm-test-run-update-hardware-configuration> target # [    0.819654] iommu: Default domain type: Translated
vm-test-run-update-hardware-configuration> target # [    0.820523] iommu: DMA domain TLB invalidation policy: lazy mode
vm-test-run-update-hardware-configuration> target # [    0.821839] ACPI: bus type USB registered
vm-test-run-update-hardware-configuration> target # [    0.822573] usbcore: registered new interface driver usbfs
vm-test-run-update-hardware-configuration> target # [    0.823573] usbcore: registered new interface driver hub
vm-test-run-update-hardware-configuration> target # [    0.824528] usbcore: registered new device driver usb
vm-test-run-update-hardware-configuration> target # [    0.826482] NetLabel: Initializing
vm-test-run-update-hardware-configuration> target # [    0.827331] NetLabel:  domain hash size = 128
vm-test-run-update-hardware-configuration> target # [    0.828510] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
vm-test-run-update-hardware-configuration> target # [    0.829564] NetLabel:  unlabeled traffic allowed by default
vm-test-run-update-hardware-configuration> target # [    0.830528] PCI: Using ACPI for IRQ routing
vm-test-run-update-hardware-configuration> target # [    0.937306] pci 0000:00:01.0: vgaarb: setting as boot VGA device
vm-test-run-update-hardware-configuration> target # [    0.937505] pci 0000:00:01.0: vgaarb: bridge control possible
vm-test-run-update-hardware-configuration> target # [    0.937505] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vm-test-run-update-hardware-configuration> target # [    0.937517] vgaarb: loaded
vm-test-run-update-hardware-configuration> target # [    0.938717] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
vm-test-run-update-hardware-configuration> target # [    0.939512] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
vm-test-run-update-hardware-configuration> target # [    0.944619] clocksource: Switched to clocksource kvm-clock
vm-test-run-update-hardware-configuration> target # [    0.947032] VFS: Disk quotas dquot_6.6.0
vm-test-run-update-hardware-configuration> target # [    0.950197] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
vm-test-run-update-hardware-configuration> target # [    0.952573] pnp: PnP ACPI init
vm-test-run-update-hardware-configuration> target # [    0.953847] ACPI: IRQ 4 override to edge(!), high(!)
vm-test-run-update-hardware-configuration> target # [    0.955468] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
vm-test-run-update-hardware-configuration> target # [    0.957947] pnp: PnP ACPI: found 6 devices
vm-test-run-update-hardware-configuration> target # [    0.966284] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
vm-test-run-update-hardware-configuration> target # [    0.968741] clocksource: Switched to clocksource acpi_pm
vm-test-run-update-hardware-configuration> target # [    0.970351] NET: Registered PF_INET protocol family
vm-test-run-update-hardware-configuration> target # [    0.972495] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.990820] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.993445] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.995659] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.999015] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    1.001303] TCP: Hash tables configured (established 32768 bind 32768)
vm-test-run-update-hardware-configuration> target # [    1.003066] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    1.005321] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    1.007332] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    1.009631] NET: Registered PF_UNIX/PF_LOCAL protocol family
vm-test-run-update-hardware-configuration> target # [    1.011195] NET: Registered PF_XDP protocol family
vm-test-run-update-hardware-configuration> target # [    1.012565] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    1.014313] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    1.016158] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    1.017979] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    1.019855] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    1.021929] pci_bus 0000:00: resource 9 [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    1.025095] ACPI: \_SB_.GSIA: Enabled at IRQ 16
vm-test-run-update-hardware-configuration> target # [    1.028391] ACPI: \_SB_.GSIB: Enabled at IRQ 17
vm-test-run-update-hardware-configuration> target # [    1.031713] ACPI: \_SB_.GSIC: Enabled at IRQ 18
vm-test-run-update-hardware-configuration> target # [    1.035383] ACPI: \_SB_.GSID: Enabled at IRQ 19
vm-test-run-update-hardware-configuration> target # [    1.037840] PCI: CLS 0 bytes, default 64
vm-test-run-update-hardware-configuration> target # [    1.039313] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
vm-test-run-update-hardware-configuration> target # [    1.041821] Trying to unpack rootfs image as initramfs...
vm-test-run-update-hardware-configuration> target # [    1.050266] software IO TLB: mapped [mem 0x000000007a369000-0x000000007e369000] (64MB)
vm-test-run-update-hardware-configuration> target # [    1.052637] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bbc354b, max_idle_ns: 440795297204 ns
vm-test-run-update-hardware-configuration> target # [    1.104732] Initialise system trusted keyrings
vm-test-run-update-hardware-configuration> target # [    1.109336] workingset: timestamp_bits=40 max_order=20 bucket_order=0
vm-test-run-update-hardware-configuration> target # [    1.143471] Key type asymmetric registered
vm-test-run-update-hardware-configuration> target # [    1.144761] Asymmetric key parser 'x509' registered
vm-test-run-update-hardware-configuration> target # [    1.148358] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
vm-test-run-update-hardware-configuration> target # [    1.153321] io scheduler mq-deadline registered
vm-test-run-update-hardware-configuration> target # [    1.157260] io scheduler kyber registered
vm-test-run-update-hardware-configuration> target # [    1.160932] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
vm-test-run-update-hardware-configuration> target # [    1.165665] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
vm-test-run-update-hardware-configuration> target # [    1.174548] Linux agpgart interface v0.103
vm-test-run-update-hardware-configuration> target # [    1.175888] ACPI: bus type drm_connector registered
vm-test-run-update-hardware-configuration> target # [    1.181777] usbcore: registered new interface driver usbserial_generic
vm-test-run-update-hardware-configuration> target # [    1.183596] usbserial: USB Serial support registered for generic
vm-test-run-update-hardware-configuration> target # [    1.188266] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.
vm-test-run-update-hardware-configuration> target # [    1.188266] Please enable it if your BIOS has the CPPC option.
vm-test-run-update-hardware-configuration> target # [    1.192053] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
vm-test-run-update-hardware-configuration> target # [    1.200444] drop_monitor: Initializing network drop monitor service
vm-test-run-update-hardware-configuration> target # [    1.204464] NET: Registered PF_INET6 protocol family
vm-test-run-update-hardware-configuration> target # [    1.209619] Segment Routing with IPv6
vm-test-run-update-hardware-configuration> target # [    1.213288] In-situ OAM (IOAM) with IPv6
vm-test-run-update-hardware-configuration> target # [    1.214811] IPI shorthand broadcast: enabled
vm-test-run-update-hardware-configuration> target # [    1.223825] sched_clock: Marking stable (960026307, 263218403)->(1458344070, -235099360)
vm-test-run-update-hardware-configuration> target # [    1.231496] registered taskstats version 1
vm-test-run-update-hardware-configuration> target # [    1.232954] Loading compiled-in X.509 certificates
vm-test-run-update-hardware-configuration> target # [    1.256264] Demotion targets for Node 0: null
vm-test-run-update-hardware-configuration> target # [    1.259330] Key type .fscrypt registered
vm-test-run-update-hardware-configuration> target # [    1.260534] Key type fscrypt-provisioning registered
vm-test-run-update-hardware-configuration> target # [    1.265432] ima: No TPM chip found, activating TPM-bypass!
vm-test-run-update-hardware-configuration> target # [    1.267056] ima: Allocated hash algorithm: sha1
vm-test-run-update-hardware-configuration> target # [    1.270304] ima: No architecture policies found
vm-test-run-update-hardware-configuration> target # [    1.273269] PM:   Magic number: 10:422:82
vm-test-run-update-hardware-configuration> target # [    1.277514] RAS: Correctable Errors collector initialized.
vm-test-run-update-hardware-configuration> target # [    1.289342] clk: Disabling unused clocks
vm-test-run-update-hardware-configuration> target # [    1.290552] PM: genpd: Disabling unused power domains
vm-test-run-update-hardware-configuration> target # [    1.459717] Freeing initrd memory: 29084K
vm-test-run-update-hardware-configuration> target # [    1.463548] Freeing unused decrypted memory: 2028K
vm-test-run-update-hardware-configuration> target # [    1.466776] Freeing unused kernel image (initmem) memory: 3644K
vm-test-run-update-hardware-configuration> target # [    1.468521] Write protecting the kernel read-only data: 32768k
vm-test-run-update-hardware-configuration> target # [    1.471046] Freeing unused kernel image (text/rodata gap) memory: 1216K
vm-test-run-update-hardware-configuration> target # [    1.473292] Freeing unused kernel image (rodata/data gap) memory: 752K
vm-test-run-update-hardware-configuration> target # [    1.519830] x86/mm: Checked W+X mappings: passed, no W+X pages found.
vm-test-run-update-hardware-configuration> target # [    1.521563] Run /init as init process
vm-test-run-update-hardware-configuration> target # [    1.533098] systemd[1]: Inserted module 'autofs4'
vm-test-run-update-hardware-configuration> target # [    1.550542] fuse: init (API version 7.45)
vm-test-run-update-hardware-configuration> target # [    1.556905] ACPI: \_SB_.GSIG: Enabled at IRQ 22
vm-test-run-update-hardware-configuration> target # [    1.560198] ACPI: \_SB_.GSIH: Enabled at IRQ 23
vm-test-run-update-hardware-configuration> target # [    1.564542] ACPI: \_SB_.GSIE: Enabled at IRQ 20
vm-test-run-update-hardware-configuration> target # [    1.567705] ACPI: \_SB_.GSIF: Enabled at IRQ 21
vm-test-run-update-hardware-configuration> target # [    1.602199] systemd[1]: Successfully made /usr/ read-only.
vm-test-run-update-hardware-configuration> target # [    1.951044] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    1.961289] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    1.962864] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    1.964555] systemd[1]: Running in initrd.
vm-test-run-update-hardware-configuration> target # [    1.966209] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    1.968326] systemd[1]: Hostname set to <target>.
vm-test-run-update-hardware-configuration> target # [    2.182712] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    2.235097] systemd[1]: Queued start job for default target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    2.241015] systemd[1]: Created slice Slice /system/modprobe.
vm-test-run-update-hardware-configuration> target # [    2.243331] systemd[1]: Created slice Slice /system/systemd-makefs.
vm-test-run-update-hardware-configuration> target # [    2.245286] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    2.247565] systemd[1]: Expecting device /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.249054] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    2.250580] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    2.252162] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    2.253616] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    2.255312] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    2.257436] systemd[1]: Listening on Journal Socket (/dev/log).
vm-test-run-update-hardware-configuration> target # [    2.259365] systemd[1]: Listening on Journal Sockets.
vm-test-run-update-hardware-configuration> target # [    2.261059] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    2.262783] systemd[1]: Listening on udev Kernel Socket.
vm-test-run-update-hardware-configuration> target # [    2.264397] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    2.267190] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    2.274346] systemd[1]: Starting Load Kernel Module 9pnet_virtio...
vm-test-run-update-hardware-configuration> target # [    2.284389] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    2.298481] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    2.314329] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    2.321385] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    2.330678] netfs: FS-Cache loaded
vm-test-run-update-hardware-configuration> target # [    2.338440] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    2.354688] 9pnet: Installing 9P2000 support
vm-test-run-update-hardware-configuration> target # [    2.362786] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    2.373010] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    2.379892] systemd-journald[67]: Collecting audit messages is disabled.
vm-test-run-update-hardware-configuration> target # [    2.387934] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    2.396895] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    2.402268] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
vm-test-run-update-hardware-configuration> target # [    2.409929] systemd[1]: Finished Load Kernel Module 9pnet_virtio.
vm-test-run-update-hardware-configuration> target # [    2.413355] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
vm-test-run-update-hardware-configuration> target # [    2.419161] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config
vm-test-run-update-hardware-configuration> target # [    2.436480] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    2.458376] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    2.468628] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    2.495491] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    2.509506] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    2.528426] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    2.551425] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    2.556608] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    2.564352] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    2.574338] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    2.596401] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    2.336336] systemd-modules-load[68]: Inserted module 'dm_mod'
vm-test-run-update-hardware-configuration> target # [    2.338636] systemd-modules-load[68]: Inserted module 'virtio_balloon'
vm-test-run-update-hardware-configuration> target # [    2.342449] systemd-modules-load[68]: Inserted module 'virtio_gpu'
vm-test-run-update-hardware-configuration> target # [    2.353105] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    2.385880] systemd-udevd[76]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    2.406179] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    2.432167] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    2.464164] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    2.467769] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    2.469313] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    3.069422] virtio_blk virtio5: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    3.103303] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
vm-test-run-update-hardware-configuration> target # [    3.106620] virtio_blk virtio5: [vda] 16777216 512-byte logical blocks (8.59 GB/8.00 GiB)
vm-test-run-update-hardware-configuration> target # [    3.135829] serio: i8042 KBD port at 0x60,0x64 irq 1
vm-test-run-update-hardware-configuration> target # [    3.136904] serio: i8042 AUX port at 0x60,0x64 irq 12
vm-test-run-update-hardware-configuration> target # [    3.147734] ehci-pci 0000:00:1d.7: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.148921] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
vm-test-run-update-hardware-configuration> target # [    3.152568] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdc000
vm-test-run-update-hardware-configuration> target # [    3.159292] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
vm-test-run-update-hardware-configuration> target # [    3.160633] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    3.162799] virtio_blk virtio6: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    3.164551] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    3.169260] usb usb1: Product: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.170453] usb usb1: Manufacturer: Linux 6.18.49 ehci_hcd
vm-test-run-update-hardware-configuration> target # [    3.173258] usb usb1: SerialNumber: 0000:00:1d.7
vm-test-run-update-hardware-configuration> target # [    3.175403] hub 1-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    3.177265] hub 1-0:1.0: 6 ports detected
vm-test-run-update-hardware-configuration> target # [    3.182925] virtio_blk virtio6: [vdb] 1048576 512-byte logical blocks (537 MB/512 MiB)
vm-test-run-update-hardware-configuration> target # [    3.188713] uhci_hcd 0000:00:1d.0: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.189844] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
vm-test-run-update-hardware-configuration> target # [    3.208355] uhci_hcd 0000:00:1d.0: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    3.223445] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c280
vm-test-run-update-hardware-configuration> target # [    3.232895] SCSI subsystem initialized
vm-test-run-update-hardware-configuration> target # [    2.976860] (udev-worker)[100]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    3.243082] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.989941] (udev-worker)[103]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.997932] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    3.270032] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    3.291889] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
vm-test-run-update-hardware-configuration> target # [    3.046885] systemd-vconsole-setup[110]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [    3.052241] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    3.318549] usb usb2: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.334300] usb usb2: Manufacturer: Linux 6.18.49 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    3.341165] usb usb2: SerialNumber: 0000:00:1d.0
vm-test-run-update-hardware-configuration> target # [    3.347558] hub 2-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    3.355289] hub 2-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    3.368012] uhci_hcd 0000:00:1d.1: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.110567] systemd[1]: Found device /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    3.113104] systemd[1]: Reached target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    3.377904] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
vm-test-run-update-hardware-configuration> target # [    3.118110] systemd[1]: Starting Make File System on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    3.388131] uhci_hcd 0000:00:1d.1: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    3.389951] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c2a0
vm-test-run-update-hardware-configuration> target # [    3.398458] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    3.404283] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    3.150109] systemd-makefs[113]: Formatting /dev/vdb as ext4
vm-test-run-update-hardware-configuration> target # [    3.419550] usb usb3: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.420792] usb 1-1: new high-speed USB device number 2 using ehci-pci
vm-test-run-update-hardware-configuration> target # [    3.426813] usb usb3: Manufacturer: Linux 6.18.49 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    3.428467] usb usb3: SerialNumber: 0000:00:1d.1
vm-test-run-update-hardware-configuration> target # [    3.432691] hub 3-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    3.436272] hub 3-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    3.439708] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
vm-test-run-update-hardware-configuration> target # [    3.442374] uhci_hcd 0000:00:1d.2: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.443581] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
vm-test-run-update-hardware-configuration> target # [    3.446262] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
vm-test-run-update-hardware-configuration> target # [    3.447653] ahci 0000:00:1f.2: flags: 64bit ncq only
vm-test-run-update-hardware-configuration> target # [    3.449664] uhci_hcd 0000:00:1d.2: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    3.451433] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c2c0
vm-test-run-update-hardware-configuration> target # [    3.457443] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    3.459634] scsi host0: ahci
vm-test-run-update-hardware-configuration> target # [    3.462709] scsi host1: ahci
vm-test-run-update-hardware-configuration> target # [    3.464030] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    3.466585] scsi host2: ahci
vm-test-run-update-hardware-configuration> target # [    3.469038] scsi host3: ahci
vm-test-run-update-hardware-configuration> target # [    3.470266] usb usb4: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.472093] scsi host4: ahci
vm-test-run-update-hardware-configuration> target # [    3.474259] usb usb4: Manufacturer: Linux 6.18.49 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    3.475908] scsi host5: ahci
vm-test-run-update-hardware-configuration> target # [    3.478057] ata1: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd100 irq 46 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.480176] usb usb4: SerialNumber: 0000:00:1d.2
vm-test-run-update-hardware-configuration> target # [    3.481698] hub 4-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    3.483194] hub 4-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    3.484626] ata2: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd180 irq 46 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.494897] ata3: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd200 irq 46 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.503122] ata4: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd280 irq 46 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.511269] ata5: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd300 irq 46 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.518276] ata6: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd380 irq 46 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.554317] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
vm-test-run-update-hardware-configuration> target # [    3.556002] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
vm-test-run-update-hardware-configuration> target # [    3.557913] usb 1-1: Product: QEMU USB Tablet
vm-test-run-update-hardware-configuration> target # [    3.558999] usb 1-1: Manufacturer: QEMU
vm-test-run-update-hardware-configuration> target # [    3.560028] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1
vm-test-run-update-hardware-configuration> target # [    3.577438] hid: raw HID events driver (C) Jiri Kosina
vm-test-run-update-hardware-configuration> target # [    3.432771] systemd-makefs[113]: /dev/vdb successfully formatted as ext4 (label "vdb", uuid b9360e61-d7b1-4713-8019-c9d953b20e20)
vm-test-run-update-hardware-configuration> target # [    3.437842] systemd[1]: Finished Make File System on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    3.442286] systemd[1]: Starting File System Check on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    3.479763] systemd-fsck[141]: vdb: clean, 12/32768 files, 6385/131072 blocks
vm-test-run-update-hardware-configuration> target # [    3.519143] systemd[1]: Finished File System Check on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    3.524144] systemd[1]: Mounting /sysroot...
vm-test-run-update-hardware-configuration> target # [    3.825496] ata1: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.835321] ata5: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.836870] ata2: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.838501] ata4: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.840410] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.841840] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
vm-test-run-update-hardware-configuration> target # [    3.843463] ata3.00: applying bridge limits
vm-test-run-update-hardware-configuration> target # [    3.844784] ata3.00: configured for UDMA/100
vm-test-run-update-hardware-configuration> target # [    3.846579] ata6: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.848462] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
vm-test-run-update-hardware-configuration> target # [    3.918158] usbcore: registered new interface driver usbhid
vm-test-run-update-hardware-configuration> target # [    3.926857] usbhid: USB HID core driver
vm-test-run-update-hardware-configuration> target # [    3.950031] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2
vm-test-run-update-hardware-configuration> target # [    3.970383] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
vm-test-run-update-hardware-configuration> target # [    3.975563] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
vm-test-run-update-hardware-configuration> target # [    3.981165] EXT4-fs (vdb): mounted filesystem b9360e61-d7b1-4713-8019-c9d953b20e20 r/w with ordered data mode. Quota mode: none.
vm-test-run-update-hardware-configuration> target # [    3.989422] cdrom: Uniform CD-ROM driver Revision: 3.20
vm-test-run-update-hardware-configuration> target # [    3.728648] systemd[1]: Mounted /sysroot.
vm-test-run-update-hardware-configuration> target # [    3.730542] systemd[1]: Reached target Initrd Root File System.
vm-test-run-update-hardware-configuration> target # [    3.736110] systemd[1]: Starting Mountpoints Configured in the Real Root...
vm-test-run-update-hardware-configuration> target # [    3.759627] systemd-sysroot-fstab-check[151]: /sysroot should be mounted in the initrd, will request daemon-reload.
vm-test-run-update-hardware-configuration> target # [    3.767097] systemd[1]: Reload requested from client PID 151 ('systemd-sysroot') (unit initrd-parse-etc.service)...
vm-test-run-update-hardware-configuration> target # [    3.769619] systemd[1]: Reloading...
vm-test-run-update-hardware-configuration> target # [    3.893771] systemd[1]: Reloading finished in 126 ms.
vm-test-run-update-hardware-configuration> target # [    3.903755] systemd-sysroot-fstab-check[151]: Requesting initrd-fs.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    3.909217] systemd-sysroot-fstab-check[151]: Requesting swap.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    3.916729] systemd[1]: initrd-parse-etc.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.920105] systemd[1]: Finished Mountpoints Configured in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.921991] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.
vm-test-run-update-hardware-configuration> target # [    3.925778] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio
vm-test-run-update-hardware-configuration> target # [    4.092186] systemd[1]: Mounting /sysroot/nix/.ro-store...
vm-test-run-update-hardware-configuration> target # [    4.096180] systemd[1]: Mounting /sysroot/nix/.rw-store...
vm-test-run-update-hardware-configuration> target # [    4.102109] systemd[1]: Mounting /sysroot/run...
vm-test-run-update-hardware-configuration> target # [    4.107445] systemd[1]: Mounting /sysroot/tmp/shared...
vm-test-run-update-hardware-configuration> target # [    4.114307] systemd[1]: Mounting /sysroot/tmp/xchg...
vm-test-run-update-hardware-configuration> target # [    4.412996] 9p: Installing v9fs 9p2000 file system support
vm-test-run-update-hardware-configuration> target # [    4.157648] systemd[1]: Mounted /sysroot/nix/.rw-store.
vm-test-run-update-hardware-configuration> target # [    4.165974] systemd[1]: Mounted /sysroot/nix/.ro-store.
vm-test-run-update-hardware-configuration> target # [    4.171185] systemd[1]: Mounted /sysroot/run.
vm-test-run-update-hardware-configuration> target # [    4.172683] systemd[1]: Mounted /sysroot/tmp/shared.
vm-test-run-update-hardware-configuration> target # [    4.175116] systemd[1]: Mounted /sysroot/tmp/xchg.
vm-test-run-update-hardware-configuration> target # [    4.179940] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    4.192166] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.194663] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    5.091595] systemd[1]: Mounting /sysroot/nix/store...
vm-test-run-update-hardware-configuration> target # [    5.118791] systemd[1]: Mounted /sysroot/nix/store.
vm-test-run-update-hardware-configuration> target # [    5.120850] systemd[1]: Reached target Initrd File Systems.
vm-test-run-update-hardware-configuration> target # [    5.124117] systemd[1]: Starting Find NixOS closure...
vm-test-run-update-hardware-configuration> target # [    5.128175] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...
vm-test-run-update-hardware-configuration> target # [    5.151153] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    5.152972] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.161107] systemd[1]: Finished Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    5.163263] systemd[1]: Reached target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    5.165178] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...
vm-test-run-update-hardware-configuration> target # [    5.181239] systemd[1]: Stopped target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    5.183127] systemd[1]: Stopped target Basic System.
vm-test-run-update-hardware-configuration> target # [    5.185186] systemd[1]: Stopped target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    5.186507] systemd[1]: Stopped target Path Units.
vm-test-run-update-hardware-configuration> target # [    5.187827] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.189974] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    5.193179] systemd[1]: Stopped target Slice Units.
vm-test-run-update-hardware-configuration> target # [    5.194540] systemd[1]: Stopped target Socket Units.
vm-test-run-update-hardware-configuration> target # [    5.195773] systemd[1]: Stopped target System Initialization.
vm-test-run-update-hardware-configuration> target # [    5.197163] systemd[1]: Stopped target Swaps.
vm-test-run-update-hardware-configuration> target # [    5.198654] systemd[1]: Stopped target Timer Units.
vm-test-run-update-hardware-configuration> target # [    5.200199] systemd[1]: dbus.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.202215] systemd[1]: Closed D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    5.203640] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.206180] systemd[1]: Stopped Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    5.207398] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio
vm-test-run-update-hardware-configuration> target # [    5.210287] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    5.211922] systemd[1]: systemd-sysctl.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.214191] systemd[1]: Stopped Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    5.215571] systemd[1]: systemd-modules-load.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.218169] systemd[1]: Stopped Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    5.219405] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.221191] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    5.222922] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.224920] systemd[1]: Stopped Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    5.226656] systemd[1]: Stopped target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    5.229196] systemd[1]: Stopped target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    5.230716] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.232528] systemd[1]: Stopped Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    5.234236] systemd[1]: Stopping Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    5.237220] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.239550] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    5.253392] systemd[1]: initrd-cleanup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.257732] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.
vm-test-run-update-hardware-configuration> target # [    5.261188] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.265797] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    5.268952] systemd[1]: systemd-udevd.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.271267] systemd[1]: Stopped Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    5.273806] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.276223] systemd[1]: Closed udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    5.278113] systemd[1]: Starting Cleanup udev Database...
vm-test-run-update-hardware-configuration> target # [    5.280218] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.281944] systemd[1]: Stopped Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    5.283429] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.286210] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    5.287834] systemd[1]: kmod-static-nodes.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.289404] systemd[1]: Stopped Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    5.304321] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.306791] systemd[1]: Finished Cleanup udev Database.
vm-test-run-update-hardware-configuration> target # [    5.309222] systemd[1]: Reached target Switch Root.
vm-test-run-update-hardware-configuration> target # [    5.311602] systemd[1]: Starting NixOS Activation...
vm-test-run-update-hardware-configuration> target # [    5.428491] initrd-nixos-activation-start[204]: booting system configuration /nix/store/5kjwhphj8smxlmc9xhbsz4apxgxyd6zf-nixos-system-target-test
vm-test-run-update-hardware-configuration> target # [    5.475109] initrd-nixos-activation-start[204]: running activation script...
vm-test-run-update-hardware-configuration> target # [    5.871403] initrd-nixos-activation-start[227]: setting up /etc...
vm-test-run-update-hardware-configuration> target # [    6.075584] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    6.079096] systemd[1]: Finished NixOS Activation.
vm-test-run-update-hardware-configuration> target # [    6.081250] systemd[1]: Starting Switch Root...
vm-test-run-update-hardware-configuration> target # [    6.098798] systemd[1]: Switching root.
vm-test-run-update-hardware-configuration> target # [    6.493356] systemd-journald[67]: Received SIGTERM from PID 1 (systemd).
vm-test-run-update-hardware-configuration> target # [   11.604243] clocksource: Long readout interval, skipping watchdog check: cs_nsec: 3632967087 wd_nsec: 3632965652
vm-test-run-update-hardware-configuration> target # [   11.678744] NET: Registered PF_VSOCK protocol family
vm-test-run-update-hardware-configuration> target # [   12.048070] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [   12.054178] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [   12.055344] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [   12.056517] systemd[1]: Detected first boot.
vm-test-run-update-hardware-configuration> target # [   12.059913] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target: waiting for TCP port 22 on localhost
vm-test-run-update-hardware-configuration> target: waiting for the VM to finish booting
vm-test-run-update-hardware-configuration> target # [   12.178805] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [   12.279640] systemd[1]: Applying preset policy.
vm-test-run-update-hardware-configuration> target # [   12.631941] systemd[1]: Populated /etc with preset unit settings.
vm-test-run-update-hardware-configuration> target # [   13.020584] systemd[1]: initrd-switch-root.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   13.022855] systemd[1]: Stopped initrd-switch-root.service.
vm-test-run-update-hardware-configuration> target # [   13.026606] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
vm-test-run-update-hardware-configuration> target # [   13.029777] systemd[1]: Created slice Slice /system/getty.
vm-test-run-update-hardware-configuration> target # [   13.031964] systemd[1]: Created slice User and Session Slice.
vm-test-run-update-hardware-configuration> target # [   13.033482] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [   13.035362] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
vm-test-run-update-hardware-configuration> target # [   13.037015] systemd[1]: Expecting device /dev/hvc0...
vm-test-run-update-hardware-configuration> target # [   13.038233] systemd[1]: Expecting device /dev/ttyS0...
vm-test-run-update-hardware-configuration> target # [   13.039579] systemd[1]: Reached target Local Encrypted Volumes.
vm-test-run-update-hardware-configuration> target # [   13.041022] systemd[1]: Stopped target initrd-fs.target.
vm-test-run-update-hardware-configuration> target # [   13.042359] systemd[1]: Stopped target initrd-root-fs.target.
vm-test-run-update-hardware-configuration> target # [   13.043615] systemd[1]: Stopped target initrd-switch-root.target.
vm-test-run-update-hardware-configuration> target # [   13.045110] systemd[1]: Reached target Virtual Machines and Containers.
vm-test-run-update-hardware-configuration> target # [   13.046764] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [   13.048055] systemd[1]: Reached target Remote File Systems.
vm-test-run-update-hardware-configuration> target # [   13.049316] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [   13.050463] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [   13.053605] systemd[1]: Listening on Query the User Interactively for a Password.
vm-test-run-update-hardware-configuration> target # [   13.057557] systemd[1]: Listening on Process Core Dump Socket.
vm-test-run-update-hardware-configuration> target # [   13.060434] systemd[1]: Listening on Credential Encryption/Decryption.
vm-test-run-update-hardware-configuration> target # [   13.063813] systemd[1]: Listening on Factory Reset Management.
vm-test-run-update-hardware-configuration> target # [   13.065476] systemd[1]: Listening on Hostname Service Socket.
vm-test-run-update-hardware-configuration> target # [   13.069755] systemd[1]: Starting Journal Log Access Socket...
vm-test-run-update-hardware-configuration> target # [   13.072844] systemd[1]: Listening on Journal Audit Socket.
vm-test-run-update-hardware-configuration> target # [   13.076670] systemd[1]: Listening on Console Output Muting Service Socket.
vm-test-run-update-hardware-configuration> target # [   13.078361] systemd[1]: Listening on Network Management Metrics Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   13.080132] systemd[1]: Listening on Network Management Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   13.081700] systemd[1]: Listening on Network Management Netlink Socket.
vm-test-run-update-hardware-configuration> target # [   13.083331] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
vm-test-run-update-hardware-configuration> target # [   13.084956] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [   13.086922] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
vm-test-run-update-hardware-configuration> target # [   13.094039] systemd[1]: Listening on Disk Repartitioning Service Socket.
vm-test-run-update-hardware-configuration> target # [   13.095664] systemd[1]: Listening on Resolve Monitor Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   13.097150] systemd[1]: Listening on Resolve Service Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   13.098668] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [   13.099985] systemd[1]: Listening on udev Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   13.103660] systemd[1]: Mounting Huge Pages File System...
vm-test-run-update-hardware-configuration> target # [   13.108760] systemd[1]: Mounting POSIX Message Queue File System...
vm-test-run-update-hardware-configuration> target # [   13.116955] systemd[1]: Mounting Kernel Debug File System...
vm-test-run-update-hardware-configuration> target # [   13.123151] systemd[1]: Mounting Kernel Trace File System...
vm-test-run-update-hardware-configuration> target # [   13.131718] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [   13.136613] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio
vm-test-run-update-hardware-configuration> target # [   13.153829] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [   13.164864] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
vm-test-run-update-hardware-configuration> target # [   13.177778] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore
vm-test-run-update-hardware-configuration> target # [   13.180947] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [   13.194512] systemd[1]: Mounting FUSE Control File System...
vm-test-run-update-hardware-configuration> target # [   13.196161] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
vm-test-run-update-hardware-configuration> target # [   13.208027] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [   13.215952] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [   13.229921] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...
vm-test-run-update-hardware-configuration> target # [   13.244635] systemd[1]: Starting Remount Root and Kernel File Systems...
vm-test-run-update-hardware-configuration> target # [   13.254496] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [   13.272119] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [   13.277130] systemd-journald[297]: Collecting audit messages is enabled.
vm-test-run-update-hardware-configuration> target # [   13.293405] loop: module loaded
vm-test-run-update-hardware-configuration> target # [   13.300676] systemd[1]: Listening on Journal Log Access Socket.
vm-test-run-update-hardware-configuration> target # [   13.309598] systemd[1]: Mounted Huge Pages File System.
vm-test-run-update-hardware-configuration> target # [   13.315079] systemd[1]: Mounted POSIX Message Queue File System.
vm-test-run-update-hardware-configuration> target # [   13.317911] EXT4-fs (vdb): re-mounted b9360e61-d7b1-4713-8019-c9d953b20e20.
vm-test-run-update-hardware-configuration> target # [   13.321936] systemd[1]: Mounted Kernel Debug File System.
vm-test-run-update-hardware-configuration> target # [   13.332297] systemd[1]: Mounted Kernel Trace File System.
vm-test-run-update-hardware-configuration> target # [   13.338378] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [   13.345490] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   13.090105] systemd[1]: Queued start job for default target Multi-User System.
vm-test-run-update-hardware-configuration> target # [   13.355514] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [   13.094560] systemd[1]: Unnecessary job was removed for /dev/vdb.
vm-test-run-update-hardware-configuration> target # [   13.098586] systemd[1]: systemd-journald.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   13.364523] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [   13.102977] systemd-modules-load[298]: Inserted module 'loop'
vm-test-run-update-hardware-configuration> target # [   13.110295] systemd[1]: Mounted FUSE Control File System.
vm-test-run-update-hardware-configuration> target # [   13.115329] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [   13.118981] systemd[1]: Finished Remount Root and Kernel File Systems.
vm-test-run-update-hardware-configuration> target # [   13.127430] systemd-oomd[300]: No swap; memory pressure usage will be degraded
vm-test-run-update-hardware-configuration> target # [   13.139628] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.
vm-test-run-update-hardware-configuration> target # [   13.144344] systemd[1]: Listening on Disk Image Download Service Socket.
vm-test-run-update-hardware-configuration> target # [   13.149688] systemd[1]: Mounting Kernel Configuration File System...
vm-test-run-update-hardware-configuration> target # [   13.155599] systemd[1]: Starting Firewall...
vm-test-run-update-hardware-configuration> target # [   13.166320] systemd[1]: Starting Flush Journal to Persistent Storage...
vm-test-run-update-hardware-configuration> target # [   13.168472] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore
vm-test-run-update-hardware-configuration> target # [   13.181098] systemd[1]: Starting Load/Save OS Random Seed...
vm-test-run-update-hardware-configuration> target # [   13.193118] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [   13.209777] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [   13.212422] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [   13.534295] systemd-journald[297]: Received client request to flush runtime journal.
vm-test-run-update-hardware-configuration> target # [   13.608690] systemd[1]: Finished Load/Save OS Random Seed.
vm-test-run-update-hardware-configuration> target # [   13.614933] systemd[1]: Mounted Kernel Configuration File System.
vm-test-run-update-hardware-configuration> target # [   13.621339] systemd[1]: Reached target First Boot Complete.
vm-test-run-update-hardware-configuration> target # [   13.627486] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [   13.632778] systemd[1]: Starting Network Name Resolution...
vm-test-run-update-hardware-configuration> target # [   13.634650] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [   13.638488] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [   13.642207] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [   13.644512] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [   13.649063] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [   13.653141] systemd-resolved[326]: Positive Trust Anchors:
vm-test-run-update-hardware-configuration> target # [   13.657467] systemd-resolved[326]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
vm-test-run-update-hardware-configuration> target # [   13.661860] systemd-resolved[326]: . IN DS 38696 8 2 683d2d0acb8c9b712a1948b27f741219298d0a450d612c483af444a4c0fb2b16
vm-test-run-update-hardware-configuration> target # [   13.665240] systemd-resolved[326]: Negative trust anchors: home.arpa 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 170.0.0.192.in-addr.arpa 171.0.0.192.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa ipv4only.arpa resolver.arpa corp home internal intranet lan local private test
vm-test-run-update-hardware-configuration> target # [   13.688281] systemd[1]: Finished Flush Journal to Persistent Storage.
vm-test-run-update-hardware-configuration> target # [   13.700562] systemd-udevd[337]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [   13.758618] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [   13.771670] systemd[1]: Mounting /run/wrappers...
vm-test-run-update-hardware-configuration> target # [   13.798975] systemd-resolved[326]: Using system hostname 'target'.
vm-test-run-update-hardware-configuration> target # [   13.810991] systemd[1]: Started Network Name Resolution.
vm-test-run-update-hardware-configuration> target # [   13.832118] systemd[1]: Mounted /run/wrappers.
vm-test-run-update-hardware-configuration> target # [   13.834366] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [   13.840212] systemd[1]: Listening on Boot Loader Control Service Socket.
vm-test-run-update-hardware-configuration> target # [   13.844703] systemd[1]: Starting register-nix-paths.service...
vm-test-run-update-hardware-configuration> target # [   13.852382] systemd[1]: Starting Create SUID/SGID Wrappers...
vm-test-run-update-hardware-configuration> target # [   13.854961] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.
vm-test-run-update-hardware-configuration> target # [   13.872697] systemd[1]: Starting Save Transient machine-id to Disk...
vm-test-run-update-hardware-configuration> target # [   13.884181] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [   13.886334] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [   14.001242] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   14.014968] systemd[1]: Finished Save Transient machine-id to Disk.
vm-test-run-update-hardware-configuration> target # [   14.089393] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [   14.104180] systemd[1]: Starting Rebuild Journal Catalog...
vm-test-run-update-hardware-configuration> target # [   14.117407] systemd[1]: Starting Record System Boot/Shutdown in UTMP...
vm-test-run-update-hardware-configuration> target # [   14.205656] systemd[1]: Finished Record System Boot/Shutdown in UTMP.
vm-test-run-update-hardware-configuration> target # [   14.259856] systemd[1]: Finished Rebuild Journal Catalog.
vm-test-run-update-hardware-configuration> target # [   14.271643] systemd[1]: Starting Update is Completed...
vm-test-run-update-hardware-configuration> target # [   14.342513] systemd[1]: Finished Update is Completed.
vm-test-run-update-hardware-configuration> target # [   14.454234] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [   14.565796] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   14.570178] systemd[1]: Finished Create SUID/SGID Wrappers.
vm-test-run-update-hardware-configuration> target # [   14.663119] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.
vm-test-run-update-hardware-configuration> target # [   14.762811] systemd[1]: Finished Firewall.
vm-test-run-update-hardware-configuration> target # [   14.767088] systemd[1]: Reached target Preparation for Network.
vm-test-run-update-hardware-configuration> target # [   14.768541] systemd[1]: Listening on Network Management Resolve Hook Socket.
vm-test-run-update-hardware-configuration> target # [   14.779098] systemd[1]: Starting Network Management...
vm-test-run-update-hardware-configuration> target # [   14.792909] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.
vm-test-run-update-hardware-configuration> target # [   14.856737] systemd[1]: Finished register-nix-paths.service.
vm-test-run-update-hardware-configuration> target # [   14.858626] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [   14.862227] systemd[1]: Started Discard unused filesystem blocks once a week.
vm-test-run-update-hardware-configuration> target # [   14.865676] systemd[1]: Started Daily Cleanup of Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   14.867214] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [   14.870230] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   14.871711] systemd[1]: Listening on Nix Daemon Socket.
vm-test-run-update-hardware-configuration> target # [   14.876099] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).
vm-test-run-update-hardware-configuration> target # [   14.880088] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.
vm-test-run-update-hardware-configuration> target # [   14.881978] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [   14.883239] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   14.884651] (udev-worker)[438]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [   14.889649] (udev-worker)[421]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [   14.893127] systemd[1]: Started backdoor.service.
vm-test-run-update-hardware-configuration> target # [   14.901263] systemd[1]: Starting Import lastlog data into lastlog2 database...
vm-test-run-update-hardware-configuration> target # [   14.922838] systemd[1]: Starting Name Service Cache Daemon (nsncd)...
vm-test-run-update-hardware-configuration> target # [   14.942227] systemd[1]: Starting Post-Boot Actions...
vm-test-run-update-hardware-configuration> target # [   14.969162] systemd[1]: Started Reset console on configuration changes.
vm-test-run-update-hardware-configuration> target # [   14.992689] systemd[1]: Starting SSH Host Keys Generation...
vm-test-run-update-hardware-configuration> target # connecting to host...
vm-test-run-update-hardware-configuration> target # [   15.050251] systemd[1]: Finished Post-Boot Actions.
vm-test-run-update-hardware-configuration> target: Guest shell says: b'Spawning backdoor root shell...\n'
vm-test-run-update-hardware-configuration> target: connected to guest root shell
vm-test-run-update-hardware-configuration> target: (connecting took 3.16 seconds)
vm-test-run-update-hardware-configuration> target: (finished: waiting for the VM to finish booting, in 3.16 seconds)
vm-test-run-update-hardware-configuration> target # [   15.093340] nsncd[529]: Sep 04 15:03:49.228 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"
vm-test-run-update-hardware-configuration> target # [   15.100325] systemd[1]: Started Name Service Cache Daemon (nsncd).
vm-test-run-update-hardware-configuration> target # [   15.123331] systemd[1]: Reached target Host and Network Name Lookups.
vm-test-run-update-hardware-configuration> target # [   15.125343] systemd[1]: Reached target User and Group Name Lookups.
vm-test-run-update-hardware-configuration> target # [   15.141632] systemd[1]: Starting D-Bus System Message Bus...
vm-test-run-update-hardware-configuration> target # [   15.168714] systemd[1]: Starting User Login Management...
vm-test-run-update-hardware-configuration> target # [   15.185057] systemd[1]: Finished Import lastlog data into lastlog2 database.
vm-test-run-update-hardware-configuration> target # [   15.525166] cfg80211: Loading compiled-in X.509 certificates for regulatory database
vm-test-run-update-hardware-configuration> target # [   15.564728] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
vm-test-run-update-hardware-configuration> target # [   15.566029] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
vm-test-run-update-hardware-configuration> target # [   15.579164] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
vm-test-run-update-hardware-configuration> target # [   15.580931] cfg80211: failed to load regulatory.db
vm-test-run-update-hardware-configuration> target # [   15.344562] dbus-broker-launch[558]: Looking up NSS user entry for 'systemd-timesync'...
vm-test-run-update-hardware-configuration> target # [   15.361766] dbus-broker-launch[558]: NSS returned no entry for 'systemd-timesync'
vm-test-run-update-hardware-configuration> target # [   15.363647] dbus-broker-launch[558]: Invalid user-name in /nix/store/p58j9r2nnmjysv85d55r0jhqd2cibi5f-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"
vm-test-run-update-hardware-configuration> target # [   15.393473] systemd-networkd[521]: lo: Link UP
vm-test-run-update-hardware-configuration> target # [   15.398357] systemd-networkd[521]: lo: Gained carrier
vm-test-run-update-hardware-configuration> target # [   15.403502] systemd[1]: Started D-Bus System Message Bus.
vm-test-run-update-hardware-configuration> target # [   15.416963] systemd-logind[563]: New seat seat0.
vm-test-run-update-hardware-configuration> target # [   15.421657] systemd[1]: Started User Login Management.
vm-test-run-update-hardware-configuration> target # [   15.434096] systemd-networkd[521]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [   15.438673] systemd[1]: Starting linger-users.service...
vm-test-run-update-hardware-configuration> target # [   15.439961] systemd[1]: Started Network Management.
vm-test-run-update-hardware-configuration> target # [   15.441482] systemd-networkd[521]: eth1: Configuring with /etc/systemd/network/40-eth1.network.
vm-test-run-update-hardware-configuration> target # [   15.446783] systemd[1]: Reached target Network.
vm-test-run-update-hardware-configuration> target # [   15.454163] systemd-networkd[521]: eth0: Configuring with /etc/systemd/network/99-ethernet-default-dhcp.network.
vm-test-run-update-hardware-configuration> target # [   15.462174] systemd-networkd[521]: eth1: Link UP
vm-test-run-update-hardware-configuration> target # [   15.468303] systemd-networkd[521]: eth1: Gained carrier
vm-test-run-update-hardware-configuration> target # [   15.469564] systemd-networkd[521]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [   15.477413] systemd[1]: Starting Enable Persistent Storage in systemd-networkd...
vm-test-run-update-hardware-configuration> target # [   15.484652] dbus-broker-launch[558]: Ready
vm-test-run-update-hardware-configuration> target # [   15.495757] systemd[1]: Starting Permit User Sessions...
vm-test-run-update-hardware-configuration> target # [   15.765695] NET: Registered PF_PACKET protocol family
vm-test-run-update-hardware-configuration> target # [   15.522257] systemd-networkd[521]: eth0: Link UP
vm-test-run-update-hardware-configuration> target # [   15.530886] systemd-networkd[521]: eth0: Gained carrier
vm-test-run-update-hardware-configuration> target # [   15.555674] systemd-networkd[521]: eth0: DHCPv4 address 10.0.2.15/24, gateway 10.0.2.2 acquired from 10.0.2.2
vm-test-run-update-hardware-configuration> target # [   15.600394] systemd[1]: linger-users.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   15.605559] systemd[1]: Finished linger-users.service.
vm-test-run-update-hardware-configuration> target # [   15.614059] systemd[1]: Finished Permit User Sessions.
vm-test-run-update-hardware-configuration> target # [   15.630870] systemd[1]: Started Getty on tty1.
vm-test-run-update-hardware-configuration> target # [   15.632353] systemd[1]: Reached target Login Prompts.
vm-test-run-update-hardware-configuration> target # [   15.649959] systemd[1]: Finished Enable Persistent Storage in systemd-networkd.
vm-test-run-update-hardware-configuration> target # [   15.971657] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console
vm-test-run-update-hardware-configuration> target # [   16.015398] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
vm-test-run-update-hardware-configuration> target # [   15.992860] systemd-resolved[326]: Clock change detected. Flushing caches.
vm-test-run-update-hardware-configuration> target # [   16.023145] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
vm-test-run-update-hardware-configuration> target # [   16.027301] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:0a.0/virtio8/input/input4
vm-test-run-update-hardware-configuration> target # [   16.035393] mousedev: PS/2 mouse device common for all mice
vm-test-run-update-hardware-configuration> target # [   16.039269] ACPI: button: Power Button [PWRF]
vm-test-run-update-hardware-configuration> target # [   16.211133] rtc_cmos 00:04: RTC can wake from S4
vm-test-run-update-hardware-configuration> target # [   16.249260] Console: switching to colour dummy device 80x25
vm-test-run-update-hardware-configuration> target # [   16.253504] rtc_cmos 00:04: registered as rtc0
vm-test-run-update-hardware-configuration> target # [   16.253625] rtc_cmos 00:04: setting system clock to 2026-09-04T15:03:50 UTC (1788534230)
vm-test-run-update-hardware-configuration> target # [   16.253747] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
vm-test-run-update-hardware-configuration> target # [   16.259800] parport_pc 00:02: reported by Plug and Play ACPI
vm-test-run-update-hardware-configuration> target # [   16.259912] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
vm-test-run-update-hardware-configuration> target # [   16.292814] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
vm-test-run-update-hardware-configuration> target # [   16.223378] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
vm-test-run-update-hardware-configuration> target # [   16.292938] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
vm-test-run-update-hardware-configuration> target # [   16.469070] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6
vm-test-run-update-hardware-configuration> target # [   16.277198] sshd-keygen-start[565]: Generating public/private rsa key pair.
vm-test-run-update-hardware-configuration> target # [   16.279601] sshd-keygen-start[565]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key
vm-test-run-update-hardware-configuration> target # [   16.282992] sshd-keygen-start[565]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
vm-test-run-update-hardware-configuration> target # [   16.285690] sshd-keygen-start[565]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [   16.289845] sshd-keygen-start[565]: SHA256:ulupp3w4MAEZhxzRRWl2zm2DraF7Z7NeggZgkKn1VHc root@target
vm-test-run-update-hardware-configuration> target # [   16.292179] sshd-keygen-start[565]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [   16.294206] sshd-keygen-start[565]: +---[RSA 4096]----+
vm-test-run-update-hardware-configuration> target # [   16.296395] sshd-keygen-start[565]: | .=X.++.. E      |
vm-test-run-update-hardware-configuration> target # [   16.299084] sshd-keygen-start[565]: |  Ooo +...       |
vm-test-run-update-hardware-configuration> target # [   16.300642] sshd-keygen-start[565]: | o +oo + +       |
vm-test-run-update-hardware-configuration> target # [   16.303137] sshd-keygen-start[565]: |.  .o.  = =      |
vm-test-run-update-hardware-configuration> target # [   16.305498] sshd-keygen-start[565]: |     ...S+ .     |
vm-test-run-update-hardware-configuration> target # [   16.307355] sshd-keygen-start[565]: |    o .o.o       |
vm-test-run-update-hardware-configuration> target # [   16.309284] sshd-keygen-start[565]: |     o.o= . .    |
vm-test-run-update-hardware-configuration> target # [   16.469610] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5
vm-test-run-update-hardware-configuration> target # [   16.313424] sshd-keygen-start[565]: |     .+=+ +o     |
vm-test-run-update-hardware-configuration> target # [   16.314850] sshd-keygen-start[565]: |      *B +oo     |
vm-test-run-update-hardware-configuration> target # [   16.316258] sshd-keygen-start[565]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   16.317705] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   16.635786] [drm] Found bochs VGA, ID 0xb0c5.
vm-test-run-update-hardware-configuration> target # [   16.635789] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
vm-test-run-update-hardware-configuration> target # [   16.368650] sshd-keygen-start[598]: Generating public/private ed25519 key pair.
vm-test-run-update-hardware-configuration> target # [   16.376316] sshd-keygen-start[598]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
vm-test-run-update-hardware-configuration> target # [   16.378762] sshd-keygen-start[598]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
vm-test-run-update-hardware-configuration> target # [   16.381132] sshd-keygen-start[598]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [   16.382553] sshd-keygen-start[598]: SHA256:lLYOrW7rh0ZbgMMvIQUAf2tDIRpBYlU9TKIbMU9X+dQ root@target
vm-test-run-update-hardware-configuration> target # [   16.386837] sshd-keygen-start[598]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [   16.388700] sshd-keygen-start[598]: +--[ED25519 256]--+
vm-test-run-update-hardware-configuration> target # [   16.653504] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic
vm-test-run-update-hardware-configuration> target # [   16.391849] sshd-keygen-start[598]: |O=+=o++o... .    |
vm-test-run-update-hardware-configuration> target # [   16.394271] sshd-keygen-start[598]: |o+ .B.o+ o . E   |
vm-test-run-update-hardware-configuration> target # [   16.395516] sshd-keygen-start[598]: |. .=oo  = o      |
vm-test-run-update-hardware-configuration> target # [   16.396782] sshd-keygen-start[598]: |  .oB..+ . .     |
vm-test-run-update-hardware-configuration> target # [   16.398409] sshd-keygen-start[598]: |   o++..S        |
vm-test-run-update-hardware-configuration> target # [   16.399785] sshd-keygen-start[598]: |   ...o+.        |
vm-test-run-update-hardware-configuration> target # [   16.401359] sshd-keygen-start[598]: |     o.+.        |
vm-test-run-update-hardware-configuration> target # [   16.403386] sshd-keygen-start[598]: |     .= .        |
vm-test-run-update-hardware-configuration> target # [   16.405430] sshd-keygen-start[598]: |     ++o         |
vm-test-run-update-hardware-configuration> target # [   16.407322] sshd-keygen-start[598]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   16.410190] systemd[1]: sshd-keygen.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   16.413319] systemd[1]: Finished SSH Host Keys Generation.
vm-test-run-update-hardware-configuration> target # [   16.416351] systemd[1]: Starting SSH Daemon...
vm-test-run-update-hardware-configuration> target # [   16.732809] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0
vm-test-run-update-hardware-configuration> target # [   16.473457] sshd[601]: Server listening on 0.0.0.0 port 22.
vm-test-run-update-hardware-configuration> target # [   16.476574] sshd[601]: Server listening on :: port 22.
vm-test-run-update-hardware-configuration> target # [   16.478916] systemd[1]: Started SSH Daemon.
vm-test-run-update-hardware-configuration> target # [   16.481207] systemd[1]: Reached target Multi-User System.
vm-test-run-update-hardware-configuration> target # Connection to localhost (::1) 22 port [tcp/ssh] succeeded!
vm-test-run-update-hardware-configuration> target: (finished: waiting for TCP port 22 on localhost, in 4.64 seconds)
vm-test-run-update-hardware-configuration> Setting up port forwarding from host port 60293 to guest port 22
vm-test-run-update-hardware-configuration> target # [   16.811246] iTCO_wdt iTCO_wdt.0.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
vm-test-run-update-hardware-configuration> target # [   16.558778] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   16.562803] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   16.576581] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   16.601410] systemd-logind[563]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)
vm-test-run-update-hardware-configuration> target # [   16.611679] sshd-session[607]: Connection closed by ::1 port 43764 [preauth]
vm-test-run-update-hardware-configuration> target # [   16.615484] systemd-networkd[521]: eth1: Gained IPv6LL
vm-test-run-update-hardware-configuration> target # [   16.625336] systemd-logind[563]: Watching system buttons on /dev/input/event2 (Power Button)
vm-test-run-update-hardware-configuration> target # [   16.914589] iTCO_wdt iTCO_wdt.0.auto: initialized. heartbeat=30 sec (nowayout=0)
vm-test-run-update-hardware-configuration> target # [   16.671575] systemd-logind[563]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)
vm-test-run-update-hardware-configuration> target # [   16.929635] ppdev: user-space parallel port driver
vm-test-run-update-hardware-configuration> target # [   16.977743] Console: switching to colour frame buffer device 160x50
vm-test-run-update-hardware-configuration> target # [   16.995564] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device
vm-test-run-update-hardware-configuration> target # [   17.103029] kvm_amd: TSC scaling supported
vm-test-run-update-hardware-configuration> target # [   17.107253] kvm_amd: Nested Virtualization enabled
vm-test-run-update-hardware-configuration> target # [   17.108027] kvm_amd: Nested Paging enabled
vm-test-run-update-hardware-configuration> target # [   17.113415] kvm_amd: LBR virtualization supported
vm-test-run-update-hardware-configuration> target # [   17.116732] kvm_amd: Virtual VMLOAD VMSAVE supported
vm-test-run-update-hardware-configuration> target # [   17.124250] kvm_amd: Virtual GIF supported
vm-test-run-update-hardware-configuration> target # [   17.124906] kvm_amd: Virtual NMI enabled
vm-test-run-update-hardware-configuration> target # [   16.925623] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   16.929181] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   16.937917] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   17.257665] EDAC MC: Ver: 3.0.0
vm-test-run-update-hardware-configuration> target # [   17.163466] systemd-vconsole-setup[631]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [   17.168746] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   17.174584] systemd[1]: Startup finished in 1.262s (kernel) + 10.112s (initrd) + 5.798s (userspace) = 17.174s.
vm-test-run-update-hardware-configuration> target # [   17.381192] systemd-networkd[521]: eth0: Gained IPv6LL
vm-test-run-update-hardware-configuration> Host port 60293 is now listening
vm-test-run-update-hardware-configuration> target # [   18.569617] sshd-session[635]: Connection closed by 10.0.2.2 port 55088 [preauth]
vm-test-run-update-hardware-configuration> target # [   44.212809] sshd-session[644]: Accepted publickey for nonrootuser from 10.0.2.2 port 56814 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   44.223914] sshd-session[644]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   44.245771] systemd[1]: Created slice Slice /user/1000.
vm-test-run-update-hardware-configuration> target # [   44.249284] systemd[1]: Starting User Runtime Directory /run/user/1000...
vm-test-run-update-hardware-configuration> target # [   44.260987] systemd-logind[563]: New session '1' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   44.285174] systemd[1]: Finished User Runtime Directory /run/user/1000.
vm-test-run-update-hardware-configuration> target # [   44.295213] systemd[1]: Starting User Manager for UID 1000...
vm-test-run-update-hardware-configuration> target # [   44.327745] (systemd)[650]: pam_unix(systemd-user:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   44.334783] systemd-logind[563]: New session '2' of user 'nonrootuser' with class 'manager' and type 'unspecified'.
vm-test-run-update-hardware-configuration> target # [   44.359561] systemd[650]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   44.510348] systemd[650]: Queued start job for default target Main User Target.
vm-test-run-update-hardware-configuration> target # [   44.513905] systemd[650]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   44.518119] systemd[650]: Created slice User Application Slice.
vm-test-run-update-hardware-configuration> target # [   44.520714] systemd[650]: Started Daily Cleanup of User's Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   44.522359] systemd[650]: Reached target Paths.
vm-test-run-update-hardware-configuration> target # [   44.523823] systemd[650]: Reached target Timers.
vm-test-run-update-hardware-configuration> target # [   44.527094] systemd[650]: Starting D-Bus User Message Bus Socket...
vm-test-run-update-hardware-configuration> target # [   44.530385] systemd[650]: Starting Create User Files and Directories...
vm-test-run-update-hardware-configuration> target # [   44.558125] systemd[650]: Finished Create User Files and Directories.
vm-test-run-update-hardware-configuration> target # [   44.584629] systemd[650]: Listening on D-Bus User Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   44.586532] systemd[650]: Reached target Sockets.
vm-test-run-update-hardware-configuration> target # [   44.587835] systemd[650]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   44.591206] systemd[1]: Started User Manager for UID 1000.
vm-test-run-update-hardware-configuration> target # [   44.596716] systemd[1]: Started Session 1 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   44.598683] systemd[650]: Starting Run user-specific NixOS activation...
vm-test-run-update-hardware-configuration> target # [   44.636606] systemd[650]: Finished Run user-specific NixOS activation.
vm-test-run-update-hardware-configuration> target # [   44.638935] systemd[650]: Reached target Main User Target.
vm-test-run-update-hardware-configuration> target # [   44.641376] systemd[650]: Startup finished in 288ms.
vm-test-run-update-hardware-configuration> target # [   44.725938] sudo[672]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-facter
vm-test-run-update-hardware-configuration> target # [   44.736833] sudo[672]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   45.148643] sr 2:0:0:0: Attached scsi generic sg0 type 5
vm-test-run-update-hardware-configuration> target # [   45.053726] sudo[672]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   45.065130] sshd-session[663]: Received disconnect from 10.0.2.2 port 56814:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   45.067098] sshd-session[663]: Disconnected from user nonrootuser 10.0.2.2 port 56814
vm-test-run-update-hardware-configuration> target # [   45.069306] sshd-session[644]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   45.075314] systemd-logind[563]: Session 1 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> target # [   68.720297] sshd-session[701]: Accepted publickey for nonrootuser from 10.0.2.2 port 46448 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   68.731482] sshd-session[701]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   68.740328] systemd-logind[563]: New session '3' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   68.746704] systemd[1]: Started Session 3 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   68.847760] sudo[711]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-generate-config --no-filesystems --show-hardware-config
vm-test-run-update-hardware-configuration> target # [   68.859607] sudo[711]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   69.135227] sudo[711]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   69.147042] sshd-session[704]: Received disconnect from 10.0.2.2 port 46448:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   69.148923] sshd-session[704]: Disconnected from user nonrootuser 10.0.2.2 port 46448
vm-test-run-update-hardware-configuration> target # [   69.151180] sshd-session[701]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   69.156941] systemd-logind[563]: Session 3 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> (finished: run the VM test script, in 72.03 seconds)
vm-test-run-update-hardware-configuration> test script finished in 72.07s
vm-test-run-update-hardware-configuration> cleanup
vm-test-run-update-hardware-configuration> kill QemuMachine (pid 45)
vm-test-run-update-hardware-configuration> target # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin/python3.14)
vm-test-run-update-hardware-configuration> (finished: cleanup, in 0.15 seconds)

post-build step Upload to niks3: ok
time=2026-09-04T15:04:56.240Z level=INFO msg="Uploading 0 paths to niks3.clan.lol (1 already cached)"
time=2026-09-04T15:04:56.438Z level=INFO msg="Uploading 1 narinfos"
time=2026-09-04T15:04:56.932Z level=INFO msg="Upload complete. (769ms)"