these 4 derivations will be built:
  /nix/store/zpxwxi71rb77ynl5m1fm1bajh8h2z93i-test-script.drv
  /nix/store/pz00lnb55pcj68azwanq4da31z6cklda-driverConfiguration.json.drv
  /nix/store/fi1ia79bsiaxb41x6bh1697g16hw14m0-nixos-test-driver-update-hardware-configuration.drv
  /nix/store/fbqa3q62dmr2nk4dlhdpxk3d96fjm97p-vm-test-run-update-hardware-configuration.drv
these 3 paths will be fetched (0.0 KiB download, 968.5 MiB unpacked):
  /nix/store/5kcdnsqmgfyc1y0c1vrlhra9xjp4qrqw-nixos-vm
  /nix/store/r6fjh1lw1wzcmjp68a2x64n2dbj6g1y7-qemu-for-vm-tests-11.1.0
  /nix/store/a2y40fqyk9n8lnxhl2dld5dd1bzva3na-run-nixos-vm
building '/nix/store/zpxwxi71rb77ynl5m1fm1bajh8h2z93i-test-script.drv'
test-script> structuredAttrs is enabled
building '/nix/store/pz00lnb55pcj68azwanq4da31z6cklda-driverConfiguration.json.drv'
driverConfiguration.json> structuredAttrs is enabled
building '/nix/store/fi1ia79bsiaxb41x6bh1697g16hw14m0-nixos-test-driver-update-hardware-configuration.drv'
nixos-test-driver-update-hardware-configuration> Running type check (enable/disable: config.skipTypeCheck)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck
nixos-test-driver-update-hardware-configuration> All checks passed!
nixos-test-driver-update-hardware-configuration> Linting test script (enable/disable: config.skipLint)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint
nixos-test-driver-update-hardware-configuration> All checks passed!
building '/nix/store/fbqa3q62dmr2nk4dlhdpxk3d96fjm97p-vm-test-run-update-hardware-configuration.drv' on 'ssh-ng://builder@build-x86-01.clan.lol'
building '/nix/store/fbqa3q62dmr2nk4dlhdpxk3d96fjm97p-vm-test-run-update-hardware-configuration.drv'
vm-test-run-update-hardware-configuration> Machine state will be reset. To keep it, pass --keep-machine-state
vm-test-run-update-hardware-configuration> start all VLans
vm-test-run-update-hardware-configuration> (finished: start all VLans, in 0.00 seconds)
vm-test-run-update-hardware-configuration> Test will time out and terminate in 3600.0 seconds
vm-test-run-update-hardware-configuration> run the VM test script
vm-test-run-update-hardware-configuration> additionally exposed symbols:
vm-test-run-update-hardware-configuration>     target,
vm-test-run-update-hardware-configuration>     vlan1,
vm-test-run-update-hardware-configuration>     start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh
vm-test-run-update-hardware-configuration> target: starting vm
vm-test-run-update-hardware-configuration> target # Disk image does not exist, creating the virtualisation disk image...
vm-test-run-update-hardware-configuration> target: QEMU running (pid 45)
vm-test-run-update-hardware-configuration> target # Formatting '/build/vm-state-target/tmp.Us954UOn7X', fmt=raw size=8589934592
vm-test-run-update-hardware-configuration> target # mke2fs 1.47.4 (6-Mar-2025)
vm-test-run-update-hardware-configuration> target # Discarding device blocks:       0/2097152               done
vm-test-run-update-hardware-configuration> target # Creating filesystem with 2097152 4k blocks and 524288 inodes
vm-test-run-update-hardware-configuration> target # Filesystem UUID: 90292c1a-7f90-4b38-8e0d-df4b9fb109d2
vm-test-run-update-hardware-configuration> target # Superblock backups stored on blocks:
vm-test-run-update-hardware-configuration> target # 	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Allocating group tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Writing inode tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Creating journal (16384 blocks): done
vm-test-run-update-hardware-configuration> target # Writing superblocks and filesystem accounting information:  0/64     done
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Virtualisation disk image created.
vm-test-run-update-hardware-configuration> target # Formatting 'empty0.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=536870912 lazy_refcounts=off refcount_bits=16
vm-test-run-update-hardware-configuration> target # Starting virtiofs daemons...
vm-test-run-update-hardware-configuration> target # [2026-09-16T10:03:23Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-09-16T10:03:23Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-09-16T10:03:23Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-09-16T10:03:23Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-09-16T10:03:23Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-09-16T10:03:23Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-09-16T10:03:23Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-09-16T10:03:23Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-09-16T10:03:23Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-09-16T10:03:23Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-09-16T10:03:23Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-09-16T10:03:23Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC550+7EF2C550 CA00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:02.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:06.0 CB00 PCI2.10 PnP PMM 7EFCC550 7EF2C550 CB00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:06.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Booting from ROM...
vm-test-run-update-hardware-configuration> target # Probing EDD (edd=off to disable)... o[    0.000000] Linux version 6.18.51 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Fri Sep 11 09:49:46 UTC 2026
vm-test-run-update-hardware-configuration> target # [    0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/hznfsb5gzyqqwa6mp3a39vq6ggamdmb7-nixos-system-target-test/init regInfo=/nix/store/0hpj07lyfh1z1d9qwv6634gz2slsiqfp-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-provided physical RAM map:
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd4fff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000007ffd5000-0x000000007fffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013e7fffff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] NX (Execute Disable) protection: active
vm-test-run-update-hardware-configuration> target # [    0.000000] APIC: Static calls initialized
vm-test-run-update-hardware-configuration> target # [    0.000000] SMBIOS 2.8 present.
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: Memory slots populated: 1/1
vm-test-run-update-hardware-configuration> target # [    0.000000] Hypervisor detected: KVM
vm-test-run-update-hardware-configuration> target # [    0.000000] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: using sched offset of 522788259 cycles
vm-test-run-update-hardware-configuration> target # [    0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
vm-test-run-update-hardware-configuration> target # [    0.000009] tsc: Detected 4192.120 MHz processor
vm-test-run-update-hardware-configuration> target # [    0.000866] last_pfn = 0x13e800 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000910] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
vm-test-run-update-hardware-configuration> target # [    0.000915] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
vm-test-run-update-hardware-configuration> target # [    0.000972] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.002916] found SMP MP-table at [mem 0x000f5450-0x000f545f]
vm-test-run-update-hardware-configuration> target # [    0.002966] Using GB pages for direct mapping
vm-test-run-update-hardware-configuration> target # [    0.003143] RAMDISK: [mem 0x7e36c000-0x7ffcffff]
vm-test-run-update-hardware-configuration> target # [    0.003152] ACPI: Early table checksum verification disabled
vm-test-run-update-hardware-configuration> target # [    0.003159] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS )
vm-test-run-update-hardware-configuration> target # [    0.003164] ACPI: RSDT 0x000000007FFE2433 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.003172] ACPI: FACP 0x000000007FFE222B 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.003183] ACPI: DSDT 0x000000007FFE0040 0021EB (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.003186] ACPI: FACS 0x000000007FFE0000 000040
vm-test-run-update-hardware-configuration> target # [    0.003188] ACPI: APIC 0x000000007FFE231F 000078 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.003190] ACPI: HPET 0x000000007FFE2397 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.003192] ACPI: MCFG 0x000000007FFE23CF 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.003195] ACPI: WAET 0x000000007FFE240B 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.003197] ACPI: Reserving FACP table memory at [mem 0x7ffe222b-0x7ffe231e]
vm-test-run-update-hardware-configuration> target # [    0.003199] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe222a]
vm-test-run-update-hardware-configuration> target # [    0.003200] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
vm-test-run-update-hardware-configuration> target # [    0.003201] ACPI: Reserving APIC table memory at [mem 0x7ffe231f-0x7ffe2396]
vm-test-run-update-hardware-configuration> target # [    0.003201] ACPI: Reserving HPET table memory at [mem 0x7ffe2397-0x7ffe23ce]
vm-test-run-update-hardware-configuration> target # [    0.003202] ACPI: Reserving MCFG table memory at [mem 0x7ffe23cf-0x7ffe240a]
vm-test-run-update-hardware-configuration> target # [    0.003203] ACPI: Reserving WAET table memory at [mem 0x7ffe240b-0x7ffe2432]
vm-test-run-update-hardware-configuration> target # [    0.003688] No NUMA configuration found
vm-test-run-update-hardware-configuration> target # [    0.003689] Faking a node at [mem 0x0000000000000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003694] NODE_DATA(0) allocated [mem 0x13e7f8780-0x13e7fdcff]
vm-test-run-update-hardware-configuration> target # [    0.003826] Zone ranges:
vm-test-run-update-hardware-configuration> target # [    0.003827]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
vm-test-run-update-hardware-configuration> target # [    0.003829]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
vm-test-run-update-hardware-configuration> target # [    0.003831]   Normal   [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003832]   Device   empty
vm-test-run-update-hardware-configuration> target # [    0.003833] Movable zone start for each node
vm-test-run-update-hardware-configuration> target # [    0.003835] Early memory node ranges
vm-test-run-update-hardware-configuration> target # [    0.003835]   node   0: [mem 0x0000000000001000-0x000000000009efff]
vm-test-run-update-hardware-configuration> target # [    0.003837]   node   0: [mem 0x0000000000100000-0x000000007ffd4fff]
vm-test-run-update-hardware-configuration> target # [    0.003838]   node   0: [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003840] Initmem setup node 0 [mem 0x0000000000001000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003868] On node 0, zone DMA: 1 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.004188] On node 0, zone DMA: 97 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.048909] On node 0, zone Normal: 43 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.049311] On node 0, zone Normal: 6144 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.050387] ACPI: PM-Timer IO Port: 0x608
vm-test-run-update-hardware-configuration> target # [    0.050410] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
vm-test-run-update-hardware-configuration> target # [    0.050469] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
vm-test-run-update-hardware-configuration> target # [    0.050474] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
vm-test-run-update-hardware-configuration> target # [    0.050477] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
vm-test-run-update-hardware-configuration> target # [    0.050478] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
vm-test-run-update-hardware-configuration> target # [    0.050480] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
vm-test-run-update-hardware-configuration> target # [    0.050481] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
vm-test-run-update-hardware-configuration> target # [    0.050485] ACPI: Using ACPI (MADT) for SMP configuration information
vm-test-run-update-hardware-configuration> target # [    0.050487] ACPI: HPET id: 0x8086a201 base: 0xfed00000
vm-test-run-update-hardware-configuration> target # [    0.050498] TSC deadline timer available
vm-test-run-update-hardware-configuration> target # [    0.050516] CPU topo: Max. logical packages:   1
vm-test-run-update-hardware-configuration> target # [    0.050517] CPU topo: Max. logical dies:       1
vm-test-run-update-hardware-configuration> target # [    0.050517] CPU topo: Max. dies per package:   1
vm-test-run-update-hardware-configuration> target # [    0.050526] CPU topo: Max. threads per core:   1
vm-test-run-update-hardware-configuration> target # [    0.050527] CPU topo: Num. cores per package:     1
vm-test-run-update-hardware-configuration> target # [    0.050527] CPU topo: Num. threads per package:   1
vm-test-run-update-hardware-configuration> target # [    0.050528] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs
vm-test-run-update-hardware-configuration> target # [    0.050558] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
vm-test-run-update-hardware-configuration> target # [    0.050604] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
vm-test-run-update-hardware-configuration> target # [    0.050606] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
vm-test-run-update-hardware-configuration> target # [    0.050607] PM: hibernation: Registered nosave memory: [mem 0x7ffd5000-0xffffffff]
vm-test-run-update-hardware-configuration> target # [    0.050609] [mem 0xc0000000-0xfed1bfff] available for PCI devices
vm-test-run-update-hardware-configuration> target # [    0.050611] Booting paravirtualized kernel on KVM
vm-test-run-update-hardware-configuration> target # [    0.050616] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
vm-test-run-update-hardware-configuration> target # [    0.054648] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
vm-test-run-update-hardware-configuration> target # [    0.056934] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152
vm-test-run-update-hardware-configuration> target # [    0.057012] kvm-guest: PV spinlocks disabled, single CPU
vm-test-run-update-hardware-configuration> target # [    0.057018] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/hznfsb5gzyqqwa6mp3a39vq6ggamdmb7-nixos-system-target-test/init regInfo=/nix/store/0hpj07lyfh1z1d9qwv6634gz2slsiqfp-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.057144] Unknown kernel command line parameters "regInfo=/nix/store/0hpj07lyfh1z1d9qwv6634gz2slsiqfp-closure-info/registration", will be passed to user space.
vm-test-run-update-hardware-configuration> target # [    0.057350] random: crng init done
vm-test-run-update-hardware-configuration> target # [    0.057351] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
vm-test-run-update-hardware-configuration> target # [    0.062217] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.064048] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.064097] software IO TLB: area num 1.
vm-test-run-update-hardware-configuration> target # [    0.143212] Fallback order for Node 0: 0
vm-test-run-update-hardware-configuration> target # [    0.143227] Built 1 zonelists, mobility grouping on.  Total pages: 780147
vm-test-run-update-hardware-configuration> target # [    0.143233] Policy zone: Normal
vm-test-run-update-hardware-configuration> target # [    0.145422] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
vm-test-run-update-hardware-configuration> target # [    0.151693] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
vm-test-run-update-hardware-configuration> target # [    0.157202] allocated 6291456 bytes of page_ext
vm-test-run-update-hardware-configuration> target # [    0.172127] ftrace: allocating 48736 entries in 192 pages
vm-test-run-update-hardware-configuration> target # [    0.172134] ftrace: allocated 192 pages with 2 groups
vm-test-run-update-hardware-configuration> target # [    0.173224] Dynamic Preempt: lazy
vm-test-run-update-hardware-configuration> target # [    0.173483] rcu: Preemptible hierarchical RCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.173485] rcu: 	RCU event tracing is enabled.
vm-test-run-update-hardware-configuration> target # [    0.173487] rcu: 	RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.173491] 	Trampoline variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.173491] 	Rude variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.173492] 	Tracing variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.173493] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
vm-test-run-update-hardware-configuration> target # [    0.173494] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
vm-test-run-update-hardware-configuration> target # [    0.173526] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.173528] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.173529] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.179091] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16
vm-test-run-update-hardware-configuration> target # [    0.179389] rcu: srcu_init: Setting srcu_struct sizes based on contention.
vm-test-run-update-hardware-configuration> target # [    0.179402] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
vm-test-run-update-hardware-configuration> target # [    0.179605] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
vm-test-run-update-hardware-configuration> target # [    0.185580] Console: colour VGA+ 80x25
vm-test-run-update-hardware-configuration> target # [    0.185590] printk: legacy console [tty0] enabled
vm-test-run-update-hardware-configuration> target # [    0.224907] printk: legacy console [ttyS0] enabled
vm-test-run-update-hardware-configuration> target # [    0.390078] ACPI: Core revision 20250807
vm-test-run-update-hardware-configuration> target # [    0.391224] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
vm-test-run-update-hardware-configuration> target # [    0.393480] APIC: Switch to symmetric I/O mode setup
vm-test-run-update-hardware-configuration> target # [    0.395002] x2apic enabled
vm-test-run-update-hardware-configuration> target # [    0.396086] APIC: Switched APIC routing to: physical x2apic
vm-test-run-update-hardware-configuration> target # [    0.398661] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
vm-test-run-update-hardware-configuration> target # [    0.400215] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d4d0b6d3, max_idle_ns: 440795255641 ns
vm-test-run-update-hardware-configuration> target # [    0.402816] Calibrating delay loop (skipped) preset value.. 8384.24 BogoMIPS (lpj=4192120)
vm-test-run-update-hardware-configuration> target # [    0.403939] x86/cpu: User Mode Instruction Prevention (UMIP) activated
vm-test-run-update-hardware-configuration> target # [    0.404997] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
vm-test-run-update-hardware-configuration> target # [    0.405812] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
vm-test-run-update-hardware-configuration> target # [    0.407817] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
vm-test-run-update-hardware-configuration> target # [    0.409812] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
vm-test-run-update-hardware-configuration> target # [    0.411812] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
vm-test-run-update-hardware-configuration> target # [    0.413812] Speculative Return Stack Overflow: Mitigation: Safe RET
vm-test-run-update-hardware-configuration> target # [    0.414811] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
vm-test-run-update-hardware-configuration> target # [    0.416820] Spectre V2 : Enabling IBPB for BPF
vm-test-run-update-hardware-configuration> target # [    0.417813] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
vm-test-run-update-hardware-configuration> target # [    0.418813] active return thunk: srso_alias_return_thunk
vm-test-run-update-hardware-configuration> target # [    0.419842] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
vm-test-run-update-hardware-configuration> target # [    0.421811] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
vm-test-run-update-hardware-configuration> target # [    0.423808] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
vm-test-run-update-hardware-configuration> target # [    0.424811] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
vm-test-run-update-hardware-configuration> target # [    0.425811] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
vm-test-run-update-hardware-configuration> target # [    0.426811] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
vm-test-run-update-hardware-configuration> target # [    0.427811] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
vm-test-run-update-hardware-configuration> target # [    0.428811] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
vm-test-run-update-hardware-configuration> target # [    0.429811] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
vm-test-run-update-hardware-configuration> target # [    0.430813] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
vm-test-run-update-hardware-configuration> target # [    0.431812] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
vm-test-run-update-hardware-configuration> target # [    0.432812] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
vm-test-run-update-hardware-configuration> target # [    0.434812] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
vm-test-run-update-hardware-configuration> target # [    0.436812] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
vm-test-run-update-hardware-configuration> target # [    0.437808] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16
vm-test-run-update-hardware-configuration> target # [    0.437812] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]:   24
vm-test-run-update-hardware-configuration> target # [    0.438811] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.
vm-test-run-update-hardware-configuration> target # [    0.475686] Freeing SMP alternatives memory: 44K
vm-test-run-update-hardware-configuration> target # [    0.476815] pid_max: default: 32768 minimum: 301
vm-test-run-update-hardware-configuration> target # [    0.477909] LSM: initializing lsm=capability,landlock,yama,bpf,ima
vm-test-run-update-hardware-configuration> target # [    0.478965] landlock: Up and running.
vm-test-run-update-hardware-configuration> target # [    0.479811] Yama: becoming mindful.
vm-test-run-update-hardware-configuration> target # [    0.481096] LSM support for eBPF active
vm-test-run-update-hardware-configuration> target # [    0.482628] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.483886] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.487782] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2)
vm-test-run-update-hardware-configuration> target # [    0.488470] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
vm-test-run-update-hardware-configuration> target # [    0.488816] ... version:                   2
vm-test-run-update-hardware-configuration> target # [    0.489813] ... bit width:                 48
vm-test-run-update-hardware-configuration> target # [    0.490882] ... generic counters:          6
vm-test-run-update-hardware-configuration> target # [    0.491813] ... generic bitmap:            000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.492813] ... fixed-purpose counters:    0
vm-test-run-update-hardware-configuration> target # [    0.493813] ... fixed-purpose bitmap:      0000000000000000
vm-test-run-update-hardware-configuration> target # [    0.494813] ... value mask:                0000ffffffffffff
vm-test-run-update-hardware-configuration> target # [    0.495813] ... max period:                00007fffffffffff
vm-test-run-update-hardware-configuration> target # [    0.496814] ... global_ctrl mask:          000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.497978] signal: max sigframe size: 3376
vm-test-run-update-hardware-configuration> target # [    0.499016] rcu: Hierarchical SRCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.499817] rcu: 	Max phase no-delay instances is 400.
vm-test-run-update-hardware-configuration> target # [    0.505608] smp: Bringing up secondary CPUs ...
vm-test-run-update-hardware-configuration> target # [    0.506727] smp: Brought up 1 node, 1 CPU
vm-test-run-update-hardware-configuration> target # [    0.507505] smpboot: Total of 1 processors activated (8384.24 BogoMIPS)
vm-test-run-update-hardware-configuration> target # [    0.508020] Memory: 2906972K/3120588K available (17231K kernel code, 2726K rwdata, 13600K rodata, 3644K init, 2988K bss, 201272K reserved, 0K cma-reserved)
vm-test-run-update-hardware-configuration> target # [    0.509167] devtmpfs: initialized
vm-test-run-update-hardware-configuration> target # [    0.510018] x86/mm: Memory block size: 128MB
vm-test-run-update-hardware-configuration> target # [    0.511985] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.512845] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).
vm-test-run-update-hardware-configuration> target # [    0.513977] pinctrl core: initialized pinctrl subsystem
vm-test-run-update-hardware-configuration> target # [    0.515146] PM: RTC time: 10:03:24, date: 2026-09-16
vm-test-run-update-hardware-configuration> target # [    0.518392] NET: Registered PF_NETLINK/PF_ROUTE protocol family
vm-test-run-update-hardware-configuration> target # [    0.519592] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.520920] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.522364] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.522873] audit: initializing netlink subsys (disabled)
vm-test-run-update-hardware-configuration> target # [    0.524299] thermal_sys: Registered thermal governor 'fair_share'
vm-test-run-update-hardware-configuration> target # [    0.524301] thermal_sys: Registered thermal governor 'bang_bang'
vm-test-run-update-hardware-configuration> target # [    0.524818] audit: type=2000 audit(1789553004.206:1): state=initialized audit_enabled=0 res=1
vm-test-run-update-hardware-configuration> target # [    0.526817] thermal_sys: Registered thermal governor 'step_wise'
vm-test-run-update-hardware-configuration> target # [    0.526820] thermal_sys: Registered thermal governor 'user_space'
vm-test-run-update-hardware-configuration> target # [    0.527813] thermal_sys: Registered thermal governor 'power_allocator'
vm-test-run-update-hardware-configuration> target # [    0.528863] cpuidle: using governor menu
vm-test-run-update-hardware-configuration> target # [    0.531790] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vm-test-run-update-hardware-configuration> target # [    0.533149] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.533819] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
vm-test-run-update-hardware-configuration> target # [    0.534843] PCI: Using configuration type 1 for base access
vm-test-run-update-hardware-configuration> target # [    0.536149] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
vm-test-run-update-hardware-configuration> target # [    0.541097] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.541813] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
vm-test-run-update-hardware-configuration> target # [    0.546816] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.547813] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
vm-test-run-update-hardware-configuration> target # [    0.558308] ACPI: Added _OSI(Module Device)
vm-test-run-update-hardware-configuration> target # [    0.558815] ACPI: Added _OSI(Processor Device)
vm-test-run-update-hardware-configuration> target # [    0.559776] ACPI: Added _OSI(Processor Aggregator Device)
vm-test-run-update-hardware-configuration> target # [    0.567964] ACPI: 1 ACPI AML tables successfully acquired and loaded
vm-test-run-update-hardware-configuration> target # [    0.572250] ACPI: Interpreter enabled
vm-test-run-update-hardware-configuration> target # [    0.572839] ACPI: PM: (supports S0 S3 S4 S5)
vm-test-run-update-hardware-configuration> target # [    0.575813] ACPI: Using IOAPIC for interrupt routing
vm-test-run-update-hardware-configuration> target # [    0.576879] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
vm-test-run-update-hardware-configuration> target # [    0.579812] PCI: Using E820 reservations for host bridge windows
vm-test-run-update-hardware-configuration> target # [    0.581012] ACPI: Enabled 2 GPEs in block 00 to 3F
vm-test-run-update-hardware-configuration> target # [    0.589173] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
vm-test-run-update-hardware-configuration> target # [    0.589821] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
vm-test-run-update-hardware-configuration> target # [    0.590908] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]
vm-test-run-update-hardware-configuration> target # [    0.591926] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
vm-test-run-update-hardware-configuration> target # [    0.593344] PCI host bridge to bus 0000:00
vm-test-run-update-hardware-configuration> target # [    0.593820] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.594817] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.595817] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.596832] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.597864] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.598816] pci_bus 0000:00: root bus resource [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.599816] pci_bus 0000:00: root bus resource [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.601068] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.602766] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.605901] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
vm-test-run-update-hardware-configuration> target # [    0.606835] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
vm-test-run-update-hardware-configuration> target # [    0.607857] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
vm-test-run-update-hardware-configuration> target # [    0.609092] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
vm-test-run-update-hardware-configuration> target # [    0.610945] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.613825] pci 0000:00:02.0: BAR 0 [io  0xc180-0xc19f]
vm-test-run-update-hardware-configuration> target # [    0.614824] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
vm-test-run-update-hardware-configuration> target # [    0.615855] pci 0000:00:02.0: BAR 4 [mem 0xe0000000000-0xe0000003fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.616827] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]
vm-test-run-update-hardware-configuration> target # [    0.618771] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.621768] pci 0000:00:03.0: BAR 0 [io  0xc1a0-0xc1bf]
vm-test-run-update-hardware-configuration> target # [    0.622775] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
vm-test-run-update-hardware-configuration> target # [    0.623857] pci 0000:00:03.0: BAR 4 [mem 0xe0000004000-0xe0000007fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.625834] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.628568] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
vm-test-run-update-hardware-configuration> target # [    0.628823] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
vm-test-run-update-hardware-configuration> target # [    0.629857] pci 0000:00:04.0: BAR 4 [mem 0xe0000008000-0xe000000bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.631800] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.634824] pci 0000:00:05.0: BAR 0 [io  0xc080-0xc0ff]
vm-test-run-update-hardware-configuration> target # [    0.635844] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]
vm-test-run-update-hardware-configuration> target # [    0.636863] pci 0000:00:05.0: BAR 4 [mem 0xe000000c000-0xe000000ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.638974] pci 0000:00:06.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.641827] pci 0000:00:06.0: BAR 0 [io  0xc1c0-0xc1df]
vm-test-run-update-hardware-configuration> target # [    0.642829] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]
vm-test-run-update-hardware-configuration> target # [    0.643860] pci 0000:00:06.0: BAR 4 [mem 0xe0000010000-0xe0000013fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.644824] pci 0000:00:06.0: ROM [mem 0xfeb80000-0xfebbffff pref]
vm-test-run-update-hardware-configuration> target # [    0.646916] pci 0000:00:07.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.648834] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]
vm-test-run-update-hardware-configuration> target # [    0.649854] pci 0000:00:07.0: BAR 4 [mem 0xe0000014000-0xe0000017fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.651833] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.653834] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]
vm-test-run-update-hardware-configuration> target # [    0.654852] pci 0000:00:08.0: BAR 4 [mem 0xe0000018000-0xe000001bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.656797] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.658834] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]
vm-test-run-update-hardware-configuration> target # [    0.659856] pci 0000:00:09.0: BAR 4 [mem 0xe000001c000-0xe000001ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.662854] pci 0000:00:0a.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.664835] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]
vm-test-run-update-hardware-configuration> target # [    0.665853] pci 0000:00:0a.0: BAR 4 [mem 0xe0000020000-0xe0000023fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.667863] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.670668] pci 0000:00:0b.0: BAR 0 [io  0xc100-0xc13f]
vm-test-run-update-hardware-configuration> target # [    0.671709] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]
vm-test-run-update-hardware-configuration> target # [    0.672859] pci 0000:00:0b.0: BAR 4 [mem 0xe0000024000-0xe0000027fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.675032] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.677826] pci 0000:00:0c.0: BAR 0 [io  0xc1e0-0xc1ff]
vm-test-run-update-hardware-configuration> target # [    0.678825] pci 0000:00:0c.0: BAR 1 [mem 0xfebdb000-0xfebdbfff]
vm-test-run-update-hardware-configuration> target # [    0.679858] pci 0000:00:0c.0: BAR 4 [mem 0xe0000028000-0xe000002bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.682815] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.684876] pci 0000:00:1d.0: BAR 4 [io  0xc200-0xc21f]
vm-test-run-update-hardware-configuration> target # [    0.686319] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.687879] pci 0000:00:1d.1: BAR 4 [io  0xc220-0xc23f]
vm-test-run-update-hardware-configuration> target # [    0.690006] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.691870] pci 0000:00:1d.2: BAR 4 [io  0xc240-0xc25f]
vm-test-run-update-hardware-configuration> target # [    0.693395] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.694833] pci 0000:00:1d.7: BAR 0 [mem 0xfebdc000-0xfebdcfff]
vm-test-run-update-hardware-configuration> target # [    0.696935] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.698333] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
vm-test-run-update-hardware-configuration> target # [    0.699211] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.700941] pci 0000:00:1f.2: BAR 4 [io  0xc260-0xc27f]
vm-test-run-update-hardware-configuration> target # [    0.701879] pci 0000:00:1f.2: BAR 5 [mem 0xfebdd000-0xfebddfff]
vm-test-run-update-hardware-configuration> target # [    0.703534] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.705783] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
vm-test-run-update-hardware-configuration> target # [    0.712616] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.713962] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.714955] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.715955] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.716954] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.717955] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.718961] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.719942] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.720864] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.721836] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.722827] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.723834] ACPI: PCI: Interrupt link GSID configured for IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.724834] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
vm-test-run-update-hardware-configuration> target # [    0.725834] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
vm-test-run-update-hardware-configuration> target # [    0.726828] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
vm-test-run-update-hardware-configuration> target # [    0.727830] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
vm-test-run-update-hardware-configuration> target # [    0.729953] iommu: Default domain type: Translated
vm-test-run-update-hardware-configuration> target # [    0.730821] iommu: DMA domain TLB invalidation policy: lazy mode
vm-test-run-update-hardware-configuration> target # [    0.732087] ACPI: bus type USB registered
vm-test-run-update-hardware-configuration> target # [    0.732873] usbcore: registered new interface driver usbfs
vm-test-run-update-hardware-configuration> target # [    0.733832] usbcore: registered new interface driver hub
vm-test-run-update-hardware-configuration> target # [    0.734836] usbcore: registered new device driver usb
vm-test-run-update-hardware-configuration> target # [    0.736688] NetLabel: Initializing
vm-test-run-update-hardware-configuration> target # [    0.737418] NetLabel:  domain hash size = 128
vm-test-run-update-hardware-configuration> target # [    0.737812] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
vm-test-run-update-hardware-configuration> target # [    0.738850] NetLabel:  unlabeled traffic allowed by default
vm-test-run-update-hardware-configuration> target # [    0.739827] PCI: Using ACPI for IRQ routing
vm-test-run-update-hardware-configuration> target # [    0.821931] pci 0000:00:01.0: vgaarb: setting as boot VGA device
vm-test-run-update-hardware-configuration> target # [    0.822808] pci 0000:00:01.0: vgaarb: bridge control possible
vm-test-run-update-hardware-configuration> target # [    0.822808] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vm-test-run-update-hardware-configuration> target # [    0.822820] vgaarb: loaded
vm-test-run-update-hardware-configuration> target # [    0.823702] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
vm-test-run-update-hardware-configuration> target # [    0.824654] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
vm-test-run-update-hardware-configuration> target # [    0.827900] clocksource: Switched to clocksource kvm-clock
vm-test-run-update-hardware-configuration> target # [    0.831384] VFS: Disk quotas dquot_6.6.0
vm-test-run-update-hardware-configuration> target # [    0.832333] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
vm-test-run-update-hardware-configuration> target # [    0.834097] pnp: PnP ACPI init
vm-test-run-update-hardware-configuration> target # [    0.835062] ACPI: IRQ 4 override to edge(!), high(!)
vm-test-run-update-hardware-configuration> target # [    0.836303] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
vm-test-run-update-hardware-configuration> target # [    0.838319] pnp: PnP ACPI: found 5 devices
vm-test-run-update-hardware-configuration> target # [    0.845801] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
vm-test-run-update-hardware-configuration> target # [    0.847699] clocksource: Switched to clocksource acpi_pm
vm-test-run-update-hardware-configuration> target # [    0.849010] NET: Registered PF_INET protocol family
vm-test-run-update-hardware-configuration> target # [    0.850654] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.865545] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.867589] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.869471] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.872114] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.873800] TCP: Hash tables configured (established 32768 bind 32768)
vm-test-run-update-hardware-configuration> target # [    0.875269] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.877030] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.878774] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.880547] NET: Registered PF_UNIX/PF_LOCAL protocol family
vm-test-run-update-hardware-configuration> target # [    0.881801] NET: Registered PF_XDP protocol family
vm-test-run-update-hardware-configuration> target # [    0.882898] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.884209] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.885550] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.886990] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.888446] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.889886] pci_bus 0000:00: resource 9 [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.892052] ACPI: \_SB_.GSIA: Enabled at IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.894240] ACPI: \_SB_.GSIB: Enabled at IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.896322] ACPI: \_SB_.GSIC: Enabled at IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.898344] ACPI: \_SB_.GSID: Enabled at IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.900180] PCI: CLS 0 bytes, default 64
vm-test-run-update-hardware-configuration> target # [    0.901188] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
vm-test-run-update-hardware-configuration> target # [    0.902687] Trying to unpack rootfs image as initramfs...
vm-test-run-update-hardware-configuration> target # [    0.908445] software IO TLB: mapped [mem 0x000000007a36c000-0x000000007e36c000] (64MB)
vm-test-run-update-hardware-configuration> target # [    0.910252] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d4d0b6d3, max_idle_ns: 440795255641 ns
vm-test-run-update-hardware-configuration> target # [    0.946050] Initialise system trusted keyrings
vm-test-run-update-hardware-configuration> target # [    0.950486] workingset: timestamp_bits=40 max_order=20 bucket_order=0
vm-test-run-update-hardware-configuration> target # [    0.965925] Key type asymmetric registered
vm-test-run-update-hardware-configuration> target # [    0.971457] Asymmetric key parser 'x509' registered
vm-test-run-update-hardware-configuration> target # [    0.972602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
vm-test-run-update-hardware-configuration> target # [    0.976583] io scheduler mq-deadline registered
vm-test-run-update-hardware-configuration> target # [    0.979451] io scheduler kyber registered
vm-test-run-update-hardware-configuration> target # [    0.982951] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
vm-test-run-update-hardware-configuration> target # [    0.986735] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
vm-test-run-update-hardware-configuration> target # [    0.993538] Linux agpgart interface v0.103
vm-test-run-update-hardware-configuration> target # [    0.994601] ACPI: bus type drm_connector registered
vm-test-run-update-hardware-configuration> target # [    0.997816] usbcore: registered new interface driver usbserial_generic
vm-test-run-update-hardware-configuration> target # [    0.999267] usbserial: USB Serial support registered for generic
vm-test-run-update-hardware-configuration> target # [    1.004454] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.
vm-test-run-update-hardware-configuration> target # [    1.004454] Please enable it if your BIOS has the CPPC option.
vm-test-run-update-hardware-configuration> target # [    1.007338] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
vm-test-run-update-hardware-configuration> target # [    1.011632] drop_monitor: Initializing network drop monitor service
vm-test-run-update-hardware-configuration> target # [    1.013166] NET: Registered PF_INET6 protocol family
vm-test-run-update-hardware-configuration> target # [    1.016904] Segment Routing with IPv6
vm-test-run-update-hardware-configuration> target # [    1.020453] In-situ OAM (IOAM) with IPv6
vm-test-run-update-hardware-configuration> target # [    1.021743] IPI shorthand broadcast: enabled
vm-test-run-update-hardware-configuration> target # [    1.029784] sched_clock: Marking stable (812034265, 217407124)->(1169208759, -139767370)
vm-test-run-update-hardware-configuration> target # [    1.035744] registered taskstats version 1
vm-test-run-update-hardware-configuration> target # [    1.036996] Loading compiled-in X.509 certificates
vm-test-run-update-hardware-configuration> target # [    1.054452] Demotion targets for Node 0: null
vm-test-run-update-hardware-configuration> target # [    1.057494] Key type .fscrypt registered
vm-test-run-update-hardware-configuration> target # [    1.058547] Key type fscrypt-provisioning registered
vm-test-run-update-hardware-configuration> target # [    1.062574] ima: No TPM chip found, activating TPM-bypass!
vm-test-run-update-hardware-configuration> target # [    1.063994] ima: Allocated hash algorithm: sha1
vm-test-run-update-hardware-configuration> target # [    1.066483] ima: No architecture policies found
vm-test-run-update-hardware-configuration> target # [    1.069468] PM:   Magic number: 10:792:72
vm-test-run-update-hardware-configuration> target # [    1.074119] RAS: Correctable Errors collector initialized.
vm-test-run-update-hardware-configuration> target # [    1.084677] clk: Disabling unused clocks
vm-test-run-update-hardware-configuration> target # [    1.087450] PM: genpd: Disabling unused power domains
vm-test-run-update-hardware-configuration> target # [    1.227999] Freeing initrd memory: 29072K
vm-test-run-update-hardware-configuration> target # [    1.231764] Freeing unused decrypted memory: 2028K
vm-test-run-update-hardware-configuration> target # [    1.235225] Freeing unused kernel image (initmem) memory: 3644K
vm-test-run-update-hardware-configuration> target # [    1.236909] Write protecting the kernel read-only data: 32768k
vm-test-run-update-hardware-configuration> target # [    1.239477] Freeing unused kernel image (text/rodata gap) memory: 1200K
vm-test-run-update-hardware-configuration> target # [    1.241480] Freeing unused kernel image (rodata/data gap) memory: 736K
vm-test-run-update-hardware-configuration> target # [    1.279503] x86/mm: Checked W+X mappings: passed, no W+X pages found.
vm-test-run-update-hardware-configuration> target # [    1.281055] Run /init as init process
vm-test-run-update-hardware-configuration> target # [    1.293613] systemd[1]: Inserted module 'autofs4'
vm-test-run-update-hardware-configuration> target # [    1.313893] fuse: init (API version 7.45)
vm-test-run-update-hardware-configuration> target # [    1.321553] ACPI: \_SB_.GSIG: Enabled at IRQ 22
vm-test-run-update-hardware-configuration> target # [    1.324399] ACPI: \_SB_.GSIH: Enabled at IRQ 23
vm-test-run-update-hardware-configuration> target # [    1.328109] ACPI: \_SB_.GSIE: Enabled at IRQ 20
vm-test-run-update-hardware-configuration> target # [    1.331347] ACPI: \_SB_.GSIF: Enabled at IRQ 21
vm-test-run-update-hardware-configuration> target # [    1.338890] virtiofs virtio6: discovered new tag: nix-store
vm-test-run-update-hardware-configuration> target # [    1.341090] virtiofs virtio6: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.349250] virtiofs virtio7: discovered new tag: shared
vm-test-run-update-hardware-configuration> target # [    1.351446] virtiofs virtio7: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.363634] virtiofs virtio8: discovered new tag: xchg
vm-test-run-update-hardware-configuration> target # [    1.365794] virtiofs virtio8: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.391140] systemd[1]: Successfully made /usr/ read-only.
vm-test-run-update-hardware-configuration> target # [    1.727527] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    1.734926] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    1.736248] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    1.737612] systemd[1]: Running in initrd.
vm-test-run-update-hardware-configuration> target # [    1.739093] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    1.740886] systemd[1]: Hostname set to <target>.
vm-test-run-update-hardware-configuration> target # [    1.918621] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    1.953936] systemd[1]: Queued start job for default target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    1.958824] systemd[1]: Created slice Slice /system/modprobe.
vm-test-run-update-hardware-configuration> target # [    1.960763] systemd[1]: Created slice Slice /system/systemd-makefs.
vm-test-run-update-hardware-configuration> target # [    1.962483] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    1.964500] systemd[1]: Expecting device /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    1.965759] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    1.966943] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    1.968226] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    1.969395] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    1.970811] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    1.972391] systemd[1]: Listening on Journal Socket (/dev/log).
vm-test-run-update-hardware-configuration> target # [    1.973898] systemd[1]: Listening on Journal Sockets.
vm-test-run-update-hardware-configuration> target # [    1.975159] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    1.976495] systemd[1]: Listening on udev Kernel Socket.
vm-test-run-update-hardware-configuration> target # [    1.977710] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    1.979783] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    1.984245] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    1.993837] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    2.002503] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    2.006516] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    2.013611] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    2.029589] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    2.032772] systemd-journald[66]: Collecting audit messages is disabled.
vm-test-run-update-hardware-configuration> target # [    2.036097] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    2.045930] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    2.052031] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config
vm-test-run-update-hardware-configuration> target # [    2.055736] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
vm-test-run-update-hardware-configuration> target # [    2.065188] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    2.066963] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
vm-test-run-update-hardware-configuration> target # [    2.099122] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    2.107609] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    2.121816] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    2.133786] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    2.149949] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    2.182595] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    2.188867] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    2.195571] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    2.203509] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    2.215670] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    2.001146] systemd-modules-load[67]: Inserted module 'dm_mod'
vm-test-run-update-hardware-configuration> target # [    2.002919] systemd-modules-load[67]: Inserted module 'virtio_balloon'
vm-test-run-update-hardware-configuration> target # [    2.005468] systemd-modules-load[67]: Inserted module 'virtio_gpu'
vm-test-run-update-hardware-configuration> target # [    2.027106] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    2.055566] systemd-udevd[74]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    2.063723] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    2.088092] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    2.109258] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    2.111822] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    2.112965] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    2.586334] virtio_blk virtio2: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.589145] ehci-pci 0000:00:1d.7: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.590073] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
vm-test-run-update-hardware-configuration> target # [    2.592360] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdc000
vm-test-run-update-hardware-configuration> target # [    2.599077] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
vm-test-run-update-hardware-configuration> target # [    2.600590] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
vm-test-run-update-hardware-configuration> target # [    2.601709] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.604299] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.606921] usb usb1: Product: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.609048] usb usb1: Manufacturer: Linux 6.18.51 ehci_hcd
vm-test-run-update-hardware-configuration> target # [    2.612451] usb usb1: SerialNumber: 0000:00:1d.7
vm-test-run-update-hardware-configuration> target # [    2.613374] hub 1-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.614652] hub 1-0:1.0: 6 ports detected
vm-test-run-update-hardware-configuration> target # [    2.617713] virtio_blk virtio2: [vda] 16777216 512-byte logical blocks (8.59 GB/8.00 GiB)
vm-test-run-update-hardware-configuration> target # [    2.619206] uhci_hcd 0000:00:1d.0: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.620169] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
vm-test-run-update-hardware-configuration> target # [    2.629974] serio: i8042 KBD port at 0x60,0x64 irq 1
vm-test-run-update-hardware-configuration> target # [    2.630933] serio: i8042 AUX port at 0x60,0x64 irq 12
vm-test-run-update-hardware-configuration> target # [    2.642496] uhci_hcd 0000:00:1d.0: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.650299] virtio_blk virtio3: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.651512] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200
vm-test-run-update-hardware-configuration> target # [    2.655739] virtio_blk virtio3: [vdb] 1048576 512-byte logical blocks (537 MB/512 MiB)
vm-test-run-update-hardware-configuration> target # [    2.662770] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.664139] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.472971] (udev-worker)[98]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.475671] (udev-worker)[94]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.698436] usb usb2: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.699240] usb usb2: Manufacturer: Linux 6.18.51 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.710230] usb usb2: SerialNumber: 0000:00:1d.0
vm-test-run-update-hardware-configuration> target # [    2.716774] hub 2-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.720069] hub 2-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.505086] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    2.735932] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
vm-test-run-update-hardware-configuration> target # [    2.762295] SCSI subsystem initialized
vm-test-run-update-hardware-configuration> target # [    2.546237] systemd-vconsole-setup[107]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [    2.550251] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    2.769986] uhci_hcd 0000:00:1d.1: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.770926] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
vm-test-run-update-hardware-configuration> target # [    2.785468] uhci_hcd 0000:00:1d.1: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.570362] systemd[1]: Found device /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.572277] systemd[1]: Reached target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    2.575362] systemd[1]: Starting Make File System on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.794114] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220
vm-test-run-update-hardware-configuration> target # [    2.801796] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.803177] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.813582] usb usb3: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.820451] usb usb3: Manufacturer: Linux 6.18.51 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.821341] usb usb3: SerialNumber: 0000:00:1d.1
vm-test-run-update-hardware-configuration> target # [    2.826504] hub 3-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.611138] systemd-makefs[111]: Formatting /dev/vdb as ext4
vm-test-run-update-hardware-configuration> target # [    2.830437] hub 3-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.839756] uhci_hcd 0000:00:1d.2: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.840665] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
vm-test-run-update-hardware-configuration> target # [    2.845441] uhci_hcd 0000:00:1d.2: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.846380] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240
vm-test-run-update-hardware-configuration> target # [    2.849777] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.855436] usb 1-1: new high-speed USB device number 2 using ehci-pci
vm-test-run-update-hardware-configuration> target # [    2.856674] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.858124] usb usb4: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.861435] usb usb4: Manufacturer: Linux 6.18.51 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.862365] usb usb4: SerialNumber: 0000:00:1d.2
vm-test-run-update-hardware-configuration> target # [    2.865800] hub 4-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.867068] hub 4-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.868644] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
vm-test-run-update-hardware-configuration> target # [    2.879596] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
vm-test-run-update-hardware-configuration> target # [    2.885445] ahci 0000:00:1f.2: flags: 64bit ncq only
vm-test-run-update-hardware-configuration> target # [    2.894531] scsi host0: ahci
vm-test-run-update-hardware-configuration> target # [    2.896520] scsi host1: ahci
vm-test-run-update-hardware-configuration> target # [    2.898486] scsi host2: ahci
vm-test-run-update-hardware-configuration> target # [    2.902214] scsi host3: ahci
vm-test-run-update-hardware-configuration> target # [    2.904138] scsi host4: ahci
vm-test-run-update-hardware-configuration> target # [    2.906136] scsi host5: ahci
vm-test-run-update-hardware-configuration> target # [    2.908052] ata1: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd100 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.909509] ata2: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd180 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.910986] ata3: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd200 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.912789] ata4: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd280 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.914692] ata5: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd300 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.916683] ata6: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd380 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.707900] systemd-makefs[111]: /dev/vdb successfully formatted as ext4 (label "vdb", uuid 200c02ff-9521-4aa1-aa0e-c1c43527bc27)
vm-test-run-update-hardware-configuration> target # [    2.712977] systemd[1]: Finished Make File System on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.717104] systemd[1]: Starting File System Check on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.749436] systemd-fsck[139]: vdb: clean, 12/32768 files, 6385/131072 blocks
vm-test-run-update-hardware-configuration> target # [    2.756864] systemd[1]: Finished File System Check on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.986352] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
vm-test-run-update-hardware-configuration> target # [    2.987747] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
vm-test-run-update-hardware-configuration> target # [    2.989224] usb 1-1: Product: QEMU USB Tablet
vm-test-run-update-hardware-configuration> target # [    2.990138] usb 1-1: Manufacturer: QEMU
vm-test-run-update-hardware-configuration> target # [    2.990957] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1
vm-test-run-update-hardware-configuration> target # [    3.007507] hid: raw HID events driver (C) Jiri Kosina
vm-test-run-update-hardware-configuration> target # [    2.807952] systemd[1]: Mounting /sysroot...
vm-test-run-update-hardware-configuration> target # [    3.228078] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.229797] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
vm-test-run-update-hardware-configuration> target # [    3.230772] ata3.00: applying bridge limits
vm-test-run-update-hardware-configuration> target # [    3.231831] ata6: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.233045] ata4: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.234142] ata5: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.235240] ata2: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.236338] ata1: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.237941] ata3.00: configured for UDMA/100
vm-test-run-update-hardware-configuration> target # [    3.239446] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
vm-test-run-update-hardware-configuration> target # [    3.313560] usbcore: registered new interface driver usbhid
vm-test-run-update-hardware-configuration> target # [    3.319509] usbhid: USB HID core driver
vm-test-run-update-hardware-configuration> target # [    3.338697] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2
vm-test-run-update-hardware-configuration> target # [    3.347338] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
vm-test-run-update-hardware-configuration> target # [    3.350364] EXT4-fs (vdb): mounted filesystem 200c02ff-9521-4aa1-aa0e-c1c43527bc27 r/w with ordered data mode. Quota mode: none.
vm-test-run-update-hardware-configuration> target # [    3.371619] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
vm-test-run-update-hardware-configuration> target # [    3.159831] systemd[1]: Mounted /sysroot.
vm-test-run-update-hardware-configuration> target # [    3.162158] systemd[1]: Reached target Initrd Root File System.
vm-test-run-update-hardware-configuration> target # [    3.165621] systemd[1]: Mounting /sysroot/nix/.ro-store...
vm-test-run-update-hardware-configuration> target # [    3.384264] cdrom: Uniform CD-ROM driver Revision: 3.20
vm-test-run-update-hardware-configuration> target # [    3.169874] systemd[1]: Mounting /sysroot/nix/.rw-store...
vm-test-run-update-hardware-configuration> target # [    3.180138] systemd[1]: Mounting /sysroot/run...
vm-test-run-update-hardware-configuration> target # [    3.185768] systemd[1]: Mounting /sysroot/tmp/shared...
vm-test-run-update-hardware-configuration> target # [    3.193930] systemd[1]: Mounting /sysroot/tmp/xchg...
vm-test-run-update-hardware-configuration> target # [    3.200673] systemd[1]: Starting Mountpoints Configured in the Real Root...
vm-test-run-update-hardware-configuration> target # [    3.232919] systemd-sysroot-fstab-check[155]: /sysroot should be mounted in the initrd, will request daemon-reload.
vm-test-run-update-hardware-configuration> target # [    3.253078] systemd[1]: Mounted /sysroot/nix/.ro-store.
vm-test-run-update-hardware-configuration> target # [    3.254334] systemd[1]: Mounted /sysroot/nix/.rw-store.
vm-test-run-update-hardware-configuration> target # [    3.256352] systemd[1]: Mounted /sysroot/run.
vm-test-run-update-hardware-configuration> target # [    3.258371] systemd[1]: Mounted /sysroot/tmp/shared.
vm-test-run-update-hardware-configuration> target # [    3.260258] systemd[1]: Mounted /sysroot/tmp/xchg.
vm-test-run-update-hardware-configuration> target # [    3.270335] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    3.274334] systemd[1]: Reload requested from client PID 155 ('systemd-sysroot') (unit initrd-parse-etc.service)...
vm-test-run-update-hardware-configuration> target # [    3.276455] systemd[1]: Reloading...
vm-test-run-update-hardware-configuration> target # [    3.367330] systemd[1]: Reloading finished in 93 ms.
vm-test-run-update-hardware-configuration> target # [    3.376968] systemd-sysroot-fstab-check[155]: Requesting initrd-fs.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    3.380993] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.383333] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    3.386810] systemd-sysroot-fstab-check[155]: Requesting swap.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    3.392859] systemd[1]: initrd-parse-etc.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.395237] systemd[1]: Finished Mountpoints Configured in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.396906] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.
vm-test-run-update-hardware-configuration> target # [    3.402476] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    3.415208] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.417446] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    3.807980] systemd[1]: Mounting /sysroot/nix/store...
vm-test-run-update-hardware-configuration> target # [    3.825588] systemd[1]: Mounted /sysroot/nix/store.
vm-test-run-update-hardware-configuration> target # [    3.827066] systemd[1]: Reached target Initrd File Systems.
vm-test-run-update-hardware-configuration> target # [    3.828882] systemd[1]: Starting Find NixOS closure...
vm-test-run-update-hardware-configuration> target # [    3.831432] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...
vm-test-run-update-hardware-configuration> target # [    3.846958] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.850067] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.855547] systemd[1]: Finished Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    3.857219] systemd[1]: Reached target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    3.858739] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...
vm-test-run-update-hardware-configuration> target # [    3.873198] systemd[1]: Stopped target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    3.874682] systemd[1]: Stopped target Basic System.
vm-test-run-update-hardware-configuration> target # [    3.877066] systemd[1]: Stopped target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    3.878099] systemd[1]: Stopped target Path Units.
vm-test-run-update-hardware-configuration> target # [    3.879180] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.880517] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    3.881859] systemd[1]: Stopped target Slice Units.
vm-test-run-update-hardware-configuration> target # [    3.882813] systemd[1]: Stopped target Socket Units.
vm-test-run-update-hardware-configuration> target # [    3.884161] systemd[1]: Stopped target System Initialization.
vm-test-run-update-hardware-configuration> target # [    3.885542] systemd[1]: Stopped target Swaps.
vm-test-run-update-hardware-configuration> target # [    3.886718] systemd[1]: Stopped target Timer Units.
vm-test-run-update-hardware-configuration> target # [    3.888163] systemd[1]: dbus.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.889280] systemd[1]: Closed D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    3.890772] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.892207] systemd[1]: Stopped Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    3.893427] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    3.895154] systemd[1]: systemd-sysctl.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.896431] systemd[1]: Stopped Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    3.897654] systemd[1]: systemd-modules-load.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.899162] systemd[1]: Stopped Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    3.900339] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.902140] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.903558] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.906125] systemd[1]: Stopped Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    3.907218] systemd[1]: Stopped target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    3.908380] systemd[1]: Stopped target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    3.909722] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.911300] systemd[1]: Stopped Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    3.913153] systemd[1]: Stopping Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    3.915469] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.916720] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    3.925136] systemd[1]: initrd-cleanup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.927163] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.
vm-test-run-update-hardware-configuration> target # [    3.935368] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.937822] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    3.939335] systemd[1]: systemd-udevd.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.941138] systemd[1]: Stopped Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    3.943216] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.944459] systemd[1]: Closed udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    3.946374] systemd[1]: Starting Cleanup udev Database...
vm-test-run-update-hardware-configuration> target # [    3.948041] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.949325] systemd[1]: Stopped Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    3.950409] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.951765] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    3.954154] systemd[1]: kmod-static-nodes.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.955334] systemd[1]: Stopped Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    3.968269] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.970329] systemd[1]: Finished Cleanup udev Database.
vm-test-run-update-hardware-configuration> target # [    3.971945] systemd[1]: Reached target Switch Root.
vm-test-run-update-hardware-configuration> target # [    3.974096] systemd[1]: Starting NixOS Activation...
vm-test-run-update-hardware-configuration> target # [    4.198665] initrd-nixos-activation-start[203]: booting system configuration /nix/store/hznfsb5gzyqqwa6mp3a39vq6ggamdmb7-nixos-system-target-test
vm-test-run-update-hardware-configuration> target # [    4.230794] initrd-nixos-activation-start[203]: running activation script...
vm-test-run-update-hardware-configuration> target # [    4.465806] initrd-nixos-activation-start[226]: setting up /etc...
vm-test-run-update-hardware-configuration> target # [    4.566749] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.569356] systemd[1]: Finished NixOS Activation.
vm-test-run-update-hardware-configuration> target # [    4.572171] systemd[1]: Starting Switch Root...
vm-test-run-update-hardware-configuration> target # [    4.584135] systemd[1]: Switching root.
vm-test-run-update-hardware-configuration> target # [    4.929592] systemd-journald[66]: Received SIGTERM from PID 1 (systemd).
vm-test-run-update-hardware-configuration> target: waiting for TCP port 22 on localhost
vm-test-run-update-hardware-configuration> target: waiting for the VM to finish booting
vm-test-run-update-hardware-configuration> target # [   34.830365] NET: Registered PF_VSOCK protocol family
vm-test-run-update-hardware-configuration> target # [   35.203012] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [   35.208438] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [   35.209486] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [   35.210591] systemd[1]: Detected first boot.
vm-test-run-update-hardware-configuration> target # [   35.212308] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [   35.398230] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [   35.462615] systemd[1]: Applying preset policy.
vm-test-run-update-hardware-configuration> target # [   35.621391] systemd[1]: Populated /etc with preset unit settings.
vm-test-run-update-hardware-configuration> target # [   35.813345] systemd[1]: initrd-switch-root.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   35.814912] systemd[1]: Stopped initrd-switch-root.service.
vm-test-run-update-hardware-configuration> target # [   35.817624] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
vm-test-run-update-hardware-configuration> target # [   35.819830] systemd[1]: Created slice Slice /system/getty.
vm-test-run-update-hardware-configuration> target # [   35.821392] systemd[1]: Created slice User and Session Slice.
vm-test-run-update-hardware-configuration> target # [   35.822539] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [   35.824012] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
vm-test-run-update-hardware-configuration> target # [   35.825380] systemd[1]: Expecting device /dev/hvc0...
vm-test-run-update-hardware-configuration> target # [   35.826309] systemd[1]: Expecting device /dev/ttyS0...
vm-test-run-update-hardware-configuration> target # [   35.827285] systemd[1]: Reached target Local Encrypted Volumes.
vm-test-run-update-hardware-configuration> target # [   35.828380] systemd[1]: Stopped target initrd-fs.target.
vm-test-run-update-hardware-configuration> target # [   35.829400] systemd[1]: Stopped target initrd-root-fs.target.
vm-test-run-update-hardware-configuration> target # [   35.830441] systemd[1]: Stopped target initrd-switch-root.target.
vm-test-run-update-hardware-configuration> target # [   35.831543] systemd[1]: Reached target Virtual Machines and Containers.
vm-test-run-update-hardware-configuration> target # [   35.832727] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [   35.833664] systemd[1]: Reached target Remote File Systems.
vm-test-run-update-hardware-configuration> target # [   35.834681] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [   35.835621] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [   35.837440] systemd[1]: Listening on Query the User Interactively for a Password.
vm-test-run-update-hardware-configuration> target # [   35.839793] systemd[1]: Listening on Process Core Dump Socket.
vm-test-run-update-hardware-configuration> target # [   35.841519] systemd[1]: Listening on Credential Encryption/Decryption.
vm-test-run-update-hardware-configuration> target # [   35.843350] systemd[1]: Listening on Factory Reset Management.
vm-test-run-update-hardware-configuration> target # [   35.844416] systemd[1]: Listening on Hostname Service Socket.
vm-test-run-update-hardware-configuration> target # [   35.846977] systemd[1]: Starting Journal Log Access Socket...
vm-test-run-update-hardware-configuration> target # [   35.848487] systemd[1]: Listening on Journal Audit Socket.
vm-test-run-update-hardware-configuration> target # [   35.851048] systemd[1]: Listening on Console Output Muting Service Socket.
vm-test-run-update-hardware-configuration> target # [   35.852426] systemd[1]: Listening on Network Management Metrics Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   35.853947] systemd[1]: Listening on Network Management Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   35.855287] systemd[1]: Listening on Network Management Netlink Socket.
vm-test-run-update-hardware-configuration> target # [   35.857623] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
vm-test-run-update-hardware-configuration> target # [   35.859091] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [   35.860869] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
vm-test-run-update-hardware-configuration> target # [   35.865714] systemd[1]: Listening on Disk Repartitioning Service Socket.
vm-test-run-update-hardware-configuration> target # [   35.867195] systemd[1]: Listening on Resolve Monitor Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   35.868560] systemd[1]: Listening on Resolve Service Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   35.869908] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [   35.871132] systemd[1]: Listening on udev Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   35.873543] systemd[1]: Mounting Huge Pages File System...
vm-test-run-update-hardware-configuration> target # [   35.877632] systemd[1]: Mounting POSIX Message Queue File System...
vm-test-run-update-hardware-configuration> target # [   35.884736] systemd[1]: Mounting Kernel Debug File System...
vm-test-run-update-hardware-configuration> target # [   35.893074] systemd[1]: Mounting Kernel Trace File System...
vm-test-run-update-hardware-configuration> target # [   35.905678] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [   35.918957] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [   35.928290] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
vm-test-run-update-hardware-configuration> target # [   35.936998] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore
vm-test-run-update-hardware-configuration> target # [   35.941580] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [   35.948299] systemd[1]: Mounting FUSE Control File System...
vm-test-run-update-hardware-configuration> target # [   35.950633] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
vm-test-run-update-hardware-configuration> target # [   35.957728] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [   35.967637] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [   35.981263] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...
vm-test-run-update-hardware-configuration> target # [   35.991472] systemd[1]: Starting Remount Root and Kernel File Systems...
vm-test-run-update-hardware-configuration> target # [   35.993446] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [   36.004511] systemd-journald[296]: Collecting audit messages is enabled.
vm-test-run-update-hardware-configuration> target # [   36.013013] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [   36.018495] systemd[1]: Listening on Journal Log Access Socket.
vm-test-run-update-hardware-configuration> target # [   36.024705] systemd[1]: Mounted Huge Pages File System.
vm-test-run-update-hardware-configuration> target # [   36.030519] systemd[1]: Mounted POSIX Message Queue File System.
vm-test-run-update-hardware-configuration> target # [   36.042055] systemd[1]: Mounted Kernel Debug File System.
vm-test-run-update-hardware-configuration> target # [   36.048330] loop: module loaded
vm-test-run-update-hardware-configuration> target # [   36.054874] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [   35.838651] systemd[1]: Queued start job for default target Multi-User System.
vm-test-run-update-hardware-configuration> target # [   35.841466] systemd[1]: Unnecessary job was removed for /dev/vdb.
vm-test-run-update-hardware-configuration> target # [   35.844933] systemd[1]: systemd-journald.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   35.847544] systemd-modules-load[297]: Inserted module 'loop'
vm-test-run-update-hardware-configuration> target # [   35.854157] systemd[1]: Mounted Kernel Trace File System.
vm-test-run-update-hardware-configuration> target # [   36.076364] EXT4-fs (vdb): re-mounted 200c02ff-9521-4aa1-aa0e-c1c43527bc27.
vm-test-run-update-hardware-configuration> target # [   35.860349] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [   35.862345] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   35.866087] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [   35.867222] systemd[1]: Mounted FUSE Control File System.
vm-test-run-update-hardware-configuration> target # [   35.872147] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [   35.877917] systemd[1]: Finished Remount Root and Kernel File Systems.
vm-test-run-update-hardware-configuration> target # [   35.888760] systemd[1]: Listening on Disk Image Download Service Socket.
vm-test-run-update-hardware-configuration> target # [   35.892663] systemd[1]: Mounting Kernel Configuration File System...
vm-test-run-update-hardware-configuration> target # [   35.897940] systemd[1]: Starting Firewall...
vm-test-run-update-hardware-configuration> target # [   35.900957] systemd-oomd[299]: No swap; memory pressure usage will be degraded
vm-test-run-update-hardware-configuration> target # [   35.907357] systemd[1]: Starting Flush Journal to Persistent Storage...
vm-test-run-update-hardware-configuration> target # [   35.908629] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore
vm-test-run-update-hardware-configuration> target # [   35.922856] systemd[1]: Starting Load/Save OS Random Seed...
vm-test-run-update-hardware-configuration> target # [   35.942919] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [   35.956118] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [   35.957537] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [   35.962035] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.
vm-test-run-update-hardware-configuration> target # [   36.191679] systemd-journald[296]: Received client request to flush runtime journal.
vm-test-run-update-hardware-configuration> target # [   36.194692] systemd[1]: Finished Load/Save OS Random Seed.
vm-test-run-update-hardware-configuration> target # [   36.198446] systemd[1]: Reached target First Boot Complete.
vm-test-run-update-hardware-configuration> target # [   36.203660] systemd[1]: Mounted Kernel Configuration File System.
vm-test-run-update-hardware-configuration> target # [   36.208111] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [   36.210356] systemd[1]: Starting Network Name Resolution...
vm-test-run-update-hardware-configuration> target # [   36.212963] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [   36.216959] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [   36.218299] systemd[1]: Finished Flush Journal to Persistent Storage.
vm-test-run-update-hardware-configuration> target # [   36.233402] systemd-resolved[325]: Positive Trust Anchors:
vm-test-run-update-hardware-configuration> target # [   36.235684] systemd-resolved[325]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
vm-test-run-update-hardware-configuration> target # [   36.240109] systemd-resolved[325]: . IN DS 38696 8 2 683d2d0acb8c9b712a1948b27f741219298d0a450d612c483af444a4c0fb2b16
vm-test-run-update-hardware-configuration> target # [   36.242165] systemd-resolved[325]: Negative trust anchors: home.arpa 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 170.0.0.192.in-addr.arpa 171.0.0.192.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa ipv4only.arpa resolver.arpa corp home internal intranet lan local private test
vm-test-run-update-hardware-configuration> target # [   36.278223] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [   36.279545] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [   36.288320] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [   36.329669] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [   36.332454] systemd-resolved[325]: Using system hostname 'target'.
vm-test-run-update-hardware-configuration> target # [   36.338367] systemd[1]: Started Network Name Resolution.
vm-test-run-update-hardware-configuration> target # [   36.375347] systemd-udevd[343]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [   36.437103] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [   36.588372] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [   36.606081] systemd[1]: Mounting /run/wrappers...
vm-test-run-update-hardware-configuration> target # [   36.674122] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.
vm-test-run-update-hardware-configuration> target # [   36.729683] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.
vm-test-run-update-hardware-configuration> target # [   36.752819] systemd[1]: Mounted /run/wrappers.
vm-test-run-update-hardware-configuration> target # [   36.754041] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [   36.758412] systemd[1]: Listening on Boot Loader Control Service Socket.
vm-test-run-update-hardware-configuration> target # [   36.764460] systemd[1]: Starting register-nix-paths.service...
vm-test-run-update-hardware-configuration> target # [   36.771103] systemd[1]: Starting Create SUID/SGID Wrappers...
vm-test-run-update-hardware-configuration> target # [   36.772254] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.
vm-test-run-update-hardware-configuration> target # [   36.782330] systemd[1]: Starting Save Transient machine-id to Disk...
vm-test-run-update-hardware-configuration> target # [   36.790323] (udev-worker)[382]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [   36.794383] (udev-worker)[373]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [   36.803278] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [   36.951132] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [   36.965506] systemd[1]: Starting Rebuild Journal Catalog...
vm-test-run-update-hardware-configuration> target # [   36.971566] systemd[1]: Starting Record System Boot/Shutdown in UTMP...
vm-test-run-update-hardware-configuration> target # [   37.105159] systemd[1]: Finished Record System Boot/Shutdown in UTMP.
vm-test-run-update-hardware-configuration> target # [   37.108423] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   37.117987] systemd[1]: Finished Save Transient machine-id to Disk.
vm-test-run-update-hardware-configuration> target # [   37.123424] systemd[1]: Finished Rebuild Journal Catalog.
vm-test-run-update-hardware-configuration> target # [   37.137141] systemd[1]: Starting Update is Completed...
vm-test-run-update-hardware-configuration> target # [   37.199644] systemd[1]: Finished Update is Completed.
vm-test-run-update-hardware-configuration> target # [   37.494605] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
vm-test-run-update-hardware-configuration> target # [   37.508964] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console
vm-test-run-update-hardware-configuration> target # [   37.593261] ACPI: button: Power Button [PWRF]
vm-test-run-update-hardware-configuration> target # [   37.433061] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   37.436983] systemd[1]: Finished Create SUID/SGID Wrappers.
vm-test-run-update-hardware-configuration> target # [   37.438949] systemd[1]: Finished register-nix-paths.service.
vm-test-run-update-hardware-configuration> target # [   37.443910] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [   37.446825] systemd[1]: Started Discard unused filesystem blocks once a week.
vm-test-run-update-hardware-configuration> target # [   37.449193] systemd[1]: Started Daily Cleanup of Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   37.450635] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [   37.452494] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   37.454469] systemd[1]: Listening on Nix Daemon Socket.
vm-test-run-update-hardware-configuration> target # [   37.457689] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).
vm-test-run-update-hardware-configuration> target # [   37.459197] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.
vm-test-run-update-hardware-configuration> target # [   37.460664] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [   37.462484] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   37.466132] systemd[1]: Started backdoor.service.
vm-test-run-update-hardware-configuration> target # [   37.472958] systemd[1]: Starting Import lastlog data into lastlog2 database...
vm-test-run-update-hardware-configuration> target # [   37.483617] systemd[1]: Starting Name Service Cache Daemon (nsncd)...
vm-test-run-update-hardware-configuration> target # [   37.498973] systemd[1]: Starting Post-Boot Actions...
vm-test-run-update-hardware-configuration> target # [   37.509402] systemd[1]: Started Reset console on configuration changes.
vm-test-run-update-hardware-configuration> target # [   37.534332] systemd[1]: Starting SSH Host Keys Generation...
vm-test-run-update-hardware-configuration> target # connecting to host...
vm-test-run-update-hardware-configuration> target: Guest shell says: b'Spawning backdoor root shell...\n'
vm-test-run-update-hardware-configuration> target: connected to guest root shell
vm-test-run-update-hardware-configuration> target: (connecting took 28.47 seconds)
vm-test-run-update-hardware-configuration> target: (finished: waiting for the VM to finish booting, in 28.47 seconds)
vm-test-run-update-hardware-configuration> target # [   37.613125] systemd[1]: Starting D-Bus System Message Bus...
vm-test-run-update-hardware-configuration> target # [   37.646121] mousedev: PS/2 mouse device common for all mice
vm-test-run-update-hardware-configuration> target # [   37.624070] nsncd[510]: Sep 16 10:04:01.523 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"
vm-test-run-update-hardware-configuration> target # [   37.631609] systemd[1]: Finished Post-Boot Actions.
vm-test-run-update-hardware-configuration> target # [   37.632696] systemd[1]: Started Name Service Cache Daemon (nsncd).
vm-test-run-update-hardware-configuration> target # [   37.661277] systemd[1]: Reached target Host and Network Name Lookups.
vm-test-run-update-hardware-configuration> target # [   37.662459] systemd[1]: Reached target User and Group Name Lookups.
vm-test-run-update-hardware-configuration> target # [   37.681200] systemd[1]: Starting User Login Management...
vm-test-run-update-hardware-configuration> target # [   37.686427] systemd[1]: Finished Import lastlog data into lastlog2 database.
vm-test-run-update-hardware-configuration> target # [   37.704715] systemd-resolved[325]: Clock change detected. Flushing caches.
vm-test-run-update-hardware-configuration> target # [   37.772257] systemd[1]: Finished Firewall.
vm-test-run-update-hardware-configuration> target # [   37.773583] systemd[1]: Reached target Preparation for Network.
vm-test-run-update-hardware-configuration> target # [   37.784647] systemd[1]: Listening on Network Management Resolve Hook Socket.
vm-test-run-update-hardware-configuration> target # [   37.787237] systemd[1]: Starting Network Management...
vm-test-run-update-hardware-configuration> target # [   37.796042] rtc_cmos PNP0B00:00: RTC can wake from S4
vm-test-run-update-hardware-configuration> target # [   37.837550] Console: switching to colour dummy device 80x25
vm-test-run-update-hardware-configuration> target # [   37.920453] rtc_cmos PNP0B00:00: registered as rtc0
vm-test-run-update-hardware-configuration> target # [   37.920553] rtc_cmos PNP0B00:00: setting system clock to 2026-09-16T10:04:01 UTC (1789553041)
vm-test-run-update-hardware-configuration> target # [   37.920641] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
vm-test-run-update-hardware-configuration> target # [   37.922959] systemd-journald[296]: Time jumped backwards, rotating.
vm-test-run-update-hardware-configuration> target # [   37.968437] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:07.0/virtio5/input/input4
vm-test-run-update-hardware-configuration> target # [   37.968956] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
vm-test-run-update-hardware-configuration> target # [   37.987695] parport_pc 00:02: reported by Plug and Play ACPI
vm-test-run-update-hardware-configuration> target # [   37.987792] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
vm-test-run-update-hardware-configuration> target # [   38.186128] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
vm-test-run-update-hardware-configuration> target # [   38.186271] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
vm-test-run-update-hardware-configuration> target # [   38.192813] [drm] Found bochs VGA, ID 0xb0c5.
vm-test-run-update-hardware-configuration> target # [   38.192815] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
vm-test-run-update-hardware-configuration> target # [   37.851075] dbus-broker-launch[531]: Looking up NSS user entry for 'systemd-timesync'...
vm-test-run-update-hardware-configuration> target # [   37.985885] systemd[1]: Started D-Bus System Message Bus.
vm-test-run-update-hardware-configuration> target # [   37.993193] dbus-broker-launch[531]: NSS returned no entry for 'systemd-timesync'
vm-test-run-update-hardware-configuration> target # [   37.994634] dbus-broker-launch[531]: Invalid user-name in /nix/store/09yn8m8173fmlw3bh3lsg81x8hl8cxvm-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"
vm-test-run-update-hardware-configuration> target # [   37.997309] dbus-broker-launch[531]: Ready
vm-test-run-update-hardware-configuration> target # [   38.001377] systemd-logind[557]: New seat seat0.
vm-test-run-update-hardware-configuration> target # [   38.005312] systemd[1]: Started User Login Management.
vm-test-run-update-hardware-configuration> target # [   38.006391] systemd[1]: Starting linger-users.service...
vm-test-run-update-hardware-configuration> target # [   38.242293] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic
vm-test-run-update-hardware-configuration> target # [   38.243103] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0
vm-test-run-update-hardware-configuration> target # [   38.280461] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6
vm-test-run-update-hardware-configuration> target # [   38.288483] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5
vm-test-run-update-hardware-configuration> target # [   38.317536] cfg80211: Loading compiled-in X.509 certificates for regulatory database
vm-test-run-update-hardware-configuration> target # [   38.123580] systemd[1]: linger-users.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   38.128876] systemd[1]: Finished linger-users.service.
vm-test-run-update-hardware-configuration> target # [   38.244538] systemd-logind[557]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)
vm-test-run-update-hardware-configuration> target # [   38.401682] Console: switching to colour frame buffer device 160x50
vm-test-run-update-hardware-configuration> target # [   38.426749] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
vm-test-run-update-hardware-configuration> target # [   38.426839] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
vm-test-run-update-hardware-configuration> target # [   38.269342] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   38.281286] systemd-networkd[573]: lo: Link UP
vm-test-run-update-hardware-configuration> target # [   38.282323] systemd-networkd[573]: lo: Gained carrier
vm-test-run-update-hardware-configuration> target # [   38.291423] systemd[1]: Started Network Management.
vm-test-run-update-hardware-configuration> target # [   38.293544] systemd-networkd[573]: eth0: Configuring with /etc/systemd/network/99-ethernet-default-dhcp.network.
vm-test-run-update-hardware-configuration> target # [   38.307473] systemd-networkd[573]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [   38.309936] systemd-networkd[573]: eth1: Configuring with /etc/systemd/network/40-eth1.network.
vm-test-run-update-hardware-configuration> target # [   38.315120] systemd[1]: Reached target Network.
vm-test-run-update-hardware-configuration> target # [   38.317188] systemd-networkd[573]: eth0: Link UP
vm-test-run-update-hardware-configuration> target # [   38.323230] systemd-networkd[573]: eth0: Gained carrier
vm-test-run-update-hardware-configuration> target # [   38.331112] systemd[1]: Starting Enable Persistent Storage in systemd-networkd...
vm-test-run-update-hardware-configuration> target # [   38.336200] systemd[1]: Starting Permit User Sessions...
vm-test-run-update-hardware-configuration> target # [   38.427466] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
vm-test-run-update-hardware-configuration> target # [   38.427473] cfg80211: failed to load regulatory.db
vm-test-run-update-hardware-configuration> target # [   38.586700] NET: Registered PF_PACKET protocol family
vm-test-run-update-hardware-configuration> target # [   38.692787] ppdev: user-space parallel port driver
vm-test-run-update-hardware-configuration> target # [   38.694300] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
vm-test-run-update-hardware-configuration> target # [   38.717266] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
vm-test-run-update-hardware-configuration> target # [   38.751038] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device
vm-test-run-update-hardware-configuration> target # [   38.381106] systemd-networkd[573]: eth1: Link UP
vm-test-run-update-hardware-configuration> target # [   38.538436] systemd-networkd[573]: eth1: Gained carrier
vm-test-run-update-hardware-configuration> target # [   38.539672] systemd-networkd[573]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [   38.545345] sshd-keygen-start[560]: Generating public/private rsa key pair.
vm-test-run-update-hardware-configuration> target # [   38.548178] sshd-keygen-start[560]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key
vm-test-run-update-hardware-configuration> target # [   38.550193] sshd-keygen-start[560]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
vm-test-run-update-hardware-configuration> target # [   38.553102] sshd-keygen-start[560]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [   38.554036] sshd-keygen-start[560]: SHA256:5tAS+unEU5rS0Wa05iS0auuI1ta6i9aKnrbnfgDhTBk root@target
vm-test-run-update-hardware-configuration> target # [   38.555453] sshd-keygen-start[560]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [   38.556568] sshd-keygen-start[560]: +---[RSA 4096]----+
vm-test-run-update-hardware-configuration> target # [   38.558449] sshd-keygen-start[560]: | Eo              |
vm-test-run-update-hardware-configuration> target # [   38.559370] sshd-keygen-start[560]: | +               |
vm-test-run-update-hardware-configuration> target # [   38.560262] sshd-keygen-start[560]: |+ .   o .        |
vm-test-run-update-hardware-configuration> target # [   38.561184] sshd-keygen-start[560]: | +   o * .       |
vm-test-run-update-hardware-configuration> target # [   38.562087] sshd-keygen-start[560]: |  . . * S        |
vm-test-run-update-hardware-configuration> target # [   38.562933] sshd-keygen-start[560]: |   . = ^         |
vm-test-run-update-hardware-configuration> target # [   38.564902] sshd-keygen-start[560]: |  o * X o        |
vm-test-run-update-hardware-configuration> target # [   38.566891] sshd-keygen-start[560]: |.=oB B .         |
vm-test-run-update-hardware-configuration> target # [   38.569100] sshd-keygen-start[560]: |B*OBB .          |
vm-test-run-update-hardware-configuration> target # [   38.570850] sshd-keygen-start[560]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   38.571866] systemd-networkd[573]: eth0: DHCPv4 address 10.0.2.15/24, gateway 10.0.2.2 acquired from 10.0.2.2
vm-test-run-update-hardware-configuration> target # [   38.575441] systemd-logind[557]: Watching system buttons on /dev/input/event2 (Power Button)
vm-test-run-update-hardware-configuration> target # [   38.577460] systemd[1]: Finished Permit User Sessions.
vm-test-run-update-hardware-configuration> target # [   38.580209] systemd-logind[557]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)
vm-test-run-update-hardware-configuration> target # [   38.581704] systemd[1]: Started Getty on tty1.
vm-test-run-update-hardware-configuration> target # [   38.583181] systemd[1]: Reached target Login Prompts.
vm-test-run-update-hardware-configuration> target # [   38.585309] systemd[1]: Finished Enable Persistent Storage in systemd-networkd.
vm-test-run-update-hardware-configuration> target # [   38.587922] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   38.589274] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   38.592672] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
vm-test-run-update-hardware-configuration> target # [   38.597897] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   38.632931] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   38.636339] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   38.640769] sshd-keygen-start[604]: Generating public/private ed25519 key pair.
vm-test-run-update-hardware-configuration> target # [   38.641982] sshd-keygen-start[604]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
vm-test-run-update-hardware-configuration> target # [   38.644231] sshd-keygen-start[604]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
vm-test-run-update-hardware-configuration> target # [   38.646232] sshd-keygen-start[604]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [   38.650256] sshd-keygen-start[604]: SHA256:CkMEWUgQLp4UaCpwpAXV7z5Y0lI63r4BrsU2GiN4v9o root@target
vm-test-run-update-hardware-configuration> target # [   38.651644] sshd-keygen-start[604]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [   38.652821] sshd-keygen-start[604]: +--[ED25519 256]--+
vm-test-run-update-hardware-configuration> target # [   38.653714] sshd-keygen-start[604]: |=O**o            |
vm-test-run-update-hardware-configuration> target # [   38.654599] sshd-keygen-start[604]: |++=..            |
vm-test-run-update-hardware-configuration> target # [   38.655482] sshd-keygen-start[604]: |*+  ..           |
vm-test-run-update-hardware-configuration> target # [   38.657335] sshd-keygen-start[604]: |* ..  o          |
vm-test-run-update-hardware-configuration> target # [   38.658226] sshd-keygen-start[604]: |.o  +=  S        |
vm-test-run-update-hardware-configuration> target # [   38.659132] sshd-keygen-start[604]: |.  o=++.         |
vm-test-run-update-hardware-configuration> target # [   38.659981] sshd-keygen-start[604]: |o +.*Oo          |
vm-test-run-update-hardware-configuration> target # [   38.660873] sshd-keygen-start[604]: | o Xo.+.         |
vm-test-run-update-hardware-configuration> target # [   38.661755] sshd-keygen-start[604]: |  +.Eooo         |
vm-test-run-update-hardware-configuration> target # [   38.662769] sshd-keygen-start[604]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   38.664624] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   38.669801] systemd[1]: sshd-keygen.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   38.676371] systemd[1]: Finished SSH Host Keys Generation.
vm-test-run-update-hardware-configuration> target # [   38.687918] systemd[1]: Starting SSH Daemon...
vm-test-run-update-hardware-configuration> target # [   38.963621] kvm_amd: TSC scaling supported
vm-test-run-update-hardware-configuration> target # [   38.964112] kvm_amd: Nested Virtualization enabled
vm-test-run-update-hardware-configuration> target # [   38.750531] sshd[608]: Server listening on 0.0.0.0 port 22.
vm-test-run-update-hardware-configuration> target # [   38.751629] sshd[608]: Server listening on :: port 22.
vm-test-run-update-hardware-configuration> target # [   38.753867] systemd[1]: Started SSH Daemon.
vm-test-run-update-hardware-configuration> target # [   38.972086] kvm_amd: Nested Paging enabled
vm-test-run-update-hardware-configuration> target # [   38.972602] kvm_amd: LBR virtualization supported
vm-test-run-update-hardware-configuration> target # [   38.973169] kvm_amd: Virtual GIF supported
vm-test-run-update-hardware-configuration> target # [   38.973638] kvm_amd: Virtual NMI enabled
vm-test-run-update-hardware-configuration> target # [   38.757408] systemd[1]: Reached target Multi-User System.
vm-test-run-update-hardware-configuration> target # Connection to localhost (::1) 22 port [tcp/ssh] succeeded!
vm-test-run-update-hardware-configuration> target: (finished: waiting for TCP port 22 on localhost, in 29.69 seconds)
vm-test-run-update-hardware-configuration> Setting up port forwarding from host port 43627 to guest port 22
vm-test-run-update-hardware-configuration> target # [   39.025283] EDAC MC: Ver: 3.0.0
vm-test-run-update-hardware-configuration> target # [   38.811180] sshd-session[614]: Connection closed by ::1 port 46202 [preauth]
vm-test-run-update-hardware-configuration> target # [   38.876923] systemd-vconsole-setup[606]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [   38.880085] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   38.885153] systemd[1]: Startup finished in 1.068s (kernel) + 33.529s (initrd) + 4.286s (userspace) = 38.885s.
vm-test-run-update-hardware-configuration> target # [   39.381190] systemd-networkd[573]: eth0: Gained IPv6LL
vm-test-run-update-hardware-configuration> target # [   40.084908] systemd-networkd[573]: eth1: Gained IPv6LL
vm-test-run-update-hardware-configuration> Host port 43627 is now listening
vm-test-run-update-hardware-configuration> target # [   40.804743] sshd-session[618]: Connection closed by 10.0.2.2 port 42748 [preauth]
vm-test-run-update-hardware-configuration> target # [   53.517411] sshd-session[624]: Accepted publickey for nonrootuser from 10.0.2.2 port 51772 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   53.524432] sshd-session[624]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   53.542285] systemd-logind[557]: New session '1' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   53.547290] systemd[1]: Created slice Slice /user/1000.
vm-test-run-update-hardware-configuration> target # [   53.549828] systemd[1]: Starting User Runtime Directory /run/user/1000...
vm-test-run-update-hardware-configuration> target # [   53.571459] systemd[1]: Finished User Runtime Directory /run/user/1000.
vm-test-run-update-hardware-configuration> target # [   53.575879] systemd[1]: Starting User Manager for UID 1000...
vm-test-run-update-hardware-configuration> target # [   53.598844] (systemd)[630]: pam_unix(systemd-user:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   53.604385] systemd-logind[557]: New session '2' of user 'nonrootuser' with class 'manager' and type 'unspecified'.
vm-test-run-update-hardware-configuration> target # [   53.623478] systemd[630]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   53.720429] systemd[630]: Queued start job for default target Main User Target.
vm-test-run-update-hardware-configuration> target # [   53.722851] systemd[630]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   53.726913] systemd[630]: Created slice User Application Slice.
vm-test-run-update-hardware-configuration> target # [   53.728203] systemd[630]: Started Daily Cleanup of User's Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   53.730398] systemd[630]: Reached target Paths.
vm-test-run-update-hardware-configuration> target # [   53.731462] systemd[630]: Reached target Timers.
vm-test-run-update-hardware-configuration> target # [   53.734211] systemd[630]: Starting D-Bus User Message Bus Socket...
vm-test-run-update-hardware-configuration> target # [   53.736523] systemd[630]: Starting Create User Files and Directories...
vm-test-run-update-hardware-configuration> target # [   53.761150] systemd[630]: Finished Create User Files and Directories.
vm-test-run-update-hardware-configuration> target # [   53.769363] systemd[630]: Listening on D-Bus User Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   53.770542] systemd[630]: Reached target Sockets.
vm-test-run-update-hardware-configuration> target # [   53.771442] systemd[630]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   53.772393] systemd[1]: Started User Manager for UID 1000.
vm-test-run-update-hardware-configuration> target # [   53.775926] systemd[630]: Starting Run user-specific NixOS activation...
vm-test-run-update-hardware-configuration> target # [   53.779839] systemd[1]: Started Session 1 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   53.807990] systemd[630]: Finished Run user-specific NixOS activation.
vm-test-run-update-hardware-configuration> target # [   53.809609] systemd[630]: Reached target Main User Target.
vm-test-run-update-hardware-configuration> target # [   53.811281] systemd[630]: Startup finished in 191ms.
vm-test-run-update-hardware-configuration> target # [   53.848344] sudo[651]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-facter
vm-test-run-update-hardware-configuration> target # [   53.854905] sudo[651]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   54.157935] sr 2:0:0:0: Attached scsi generic sg0 type 5
vm-test-run-update-hardware-configuration> target # [   54.059393] sudo[651]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   54.068069] sshd-session[642]: Received disconnect from 10.0.2.2 port 51772:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   54.069624] sshd-session[642]: Disconnected from user nonrootuser 10.0.2.2 port 51772
vm-test-run-update-hardware-configuration> target # [   54.071262] sshd-session[624]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   54.075788] systemd-logind[557]: Session 1 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> target # [   64.810619] sshd-session[683]: Accepted publickey for nonrootuser from 10.0.2.2 port 44356 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   64.817226] sshd-session[683]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   64.824909] systemd-logind[557]: New session '3' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   64.828458] systemd[1]: Started Session 3 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   64.879584] sudo[693]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-generate-config --no-filesystems --show-hardware-config
vm-test-run-update-hardware-configuration> target # [   64.886485] sudo[693]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   65.023297] sudo[693]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   65.033172] sshd-session[686]: Received disconnect from 10.0.2.2 port 44356:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   65.034823] sshd-session[686]: Disconnected from user nonrootuser 10.0.2.2 port 44356
vm-test-run-update-hardware-configuration> target # [   65.036553] sshd-session[683]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   65.041349] systemd-logind[557]: Session 3 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> (finished: run the VM test script, in 67.05 seconds)
vm-test-run-update-hardware-configuration> test script finished in 67.91s
vm-test-run-update-hardware-configuration> cleanup
vm-test-run-update-hardware-configuration> kill QemuMachine (pid 45)
vm-test-run-update-hardware-configuration> target # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/d64q19q1xjdwfhqx6czvrjgrhq0n3lcc-python3-3.14.7/bin/python3.14)
vm-test-run-update-hardware-configuration> target # [2026-09-16T10:04:31Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-09-16T10:04:31Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-09-16T10:04:31Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> (finished: cleanup, in 0.14 seconds)

upload niks3: ok