these 6 derivations will be built:
  /nix/store/syayp1zssnyvfn5lq6q1k9wf00n5ww7w-installation-test-flake-x86_64-linux.drv
  /nix/store/94793l3v5x1vqxgbck6ni58k0lm7vn07-closure-info.drv
  /nix/store/8vf390icfm3v1qfglg1ghi0ils3af1wf-test-script.drv
  /nix/store/ibx2fbw1q5phass9cxn4wayqj59ih5i8-driverConfiguration.json.drv
  /nix/store/fc4p34jfzx75qbxpj5gsa4g3s77gm18n-nixos-test-driver-update-hardware-configuration.drv
  /nix/store/n7lzqqqwq2w9fgilyc4zgn57azy8cp46-vm-test-run-update-hardware-configuration.drv
building '/nix/store/8vf390icfm3v1qfglg1ghi0ils3af1wf-test-script.drv'
test-script> structuredAttrs is enabled
building '/nix/store/ibx2fbw1q5phass9cxn4wayqj59ih5i8-driverConfiguration.json.drv'
driverConfiguration.json> structuredAttrs is enabled
building '/nix/store/fc4p34jfzx75qbxpj5gsa4g3s77gm18n-nixos-test-driver-update-hardware-configuration.drv'
nixos-test-driver-update-hardware-configuration> Running type check (enable/disable: config.skipTypeCheck)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck
nixos-test-driver-update-hardware-configuration> All checks passed!
nixos-test-driver-update-hardware-configuration> Linting test script (enable/disable: config.skipLint)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint
nixos-test-driver-update-hardware-configuration> All checks passed!
building '/nix/store/n7lzqqqwq2w9fgilyc4zgn57azy8cp46-vm-test-run-update-hardware-configuration.drv' on 'ssh-ng://builder@build-x86-01.clan.lol'
building '/nix/store/n7lzqqqwq2w9fgilyc4zgn57azy8cp46-vm-test-run-update-hardware-configuration.drv'
vm-test-run-update-hardware-configuration> Machine state will be reset. To keep it, pass --keep-machine-state
vm-test-run-update-hardware-configuration> start all VLans
vm-test-run-update-hardware-configuration> (finished: start all VLans, in 0.00 seconds)
vm-test-run-update-hardware-configuration> Test will time out and terminate in 3600.0 seconds
vm-test-run-update-hardware-configuration> run the VM test script
vm-test-run-update-hardware-configuration> additionally exposed symbols:
vm-test-run-update-hardware-configuration>     target,
vm-test-run-update-hardware-configuration>     vlan1,
vm-test-run-update-hardware-configuration>     start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh
vm-test-run-update-hardware-configuration> target: starting vm
vm-test-run-update-hardware-configuration> target # Disk image does not exist, creating the virtualisation disk image...
vm-test-run-update-hardware-configuration> target: QEMU running (pid 45)
vm-test-run-update-hardware-configuration> target # Formatting '/build/vm-state-target/tmp.bWYoPLJ8Bh', fmt=raw size=8589934592
vm-test-run-update-hardware-configuration> target # mke2fs 1.47.4 (6-Mar-2025)
vm-test-run-update-hardware-configuration> target # Discarding device blocks:       0/2097152               done
vm-test-run-update-hardware-configuration> target # Creating filesystem with 2097152 4k blocks and 524288 inodes
vm-test-run-update-hardware-configuration> target # Filesystem UUID: 8da3e623-c175-4296-9658-1f51aeee42b7
vm-test-run-update-hardware-configuration> target # Superblock backups stored on blocks:
vm-test-run-update-hardware-configuration> target # 	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Allocating group tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Writing inode tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Creating journal (16384 blocks): done
vm-test-run-update-hardware-configuration> target # Writing superblocks and filesystem accounting information:  0/64     done
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Virtualisation disk image created.
vm-test-run-update-hardware-configuration> target # Formatting 'empty0.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=536870912 lazy_refcounts=off refcount_bits=16
vm-test-run-update-hardware-configuration> target # Starting virtiofs daemons...
vm-test-run-update-hardware-configuration> target # [2026-09-19T10:02:30Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-09-19T10:02:30Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-09-19T10:02:30Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-09-19T10:02:30Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-09-19T10:02:30Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-09-19T10:02:30Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-09-19T10:02:30Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-09-19T10:02:30Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-09-19T10:02:30Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-09-19T10:02:30Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-09-19T10:02:30Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-09-19T10:02:30Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC550+7EF2C550 CA00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:02.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:06.0 CB00 PCI2.10 PnP PMM 7EFCC550 7EF2C550 CB00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:06.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Booting from ROM...
vm-test-run-update-hardware-configuration> target # Probing EDD (edd=off to disable)... ok
vm-test-run-update-hardware-configuration> target # [    0.000000] Linux version 6.18.52 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Mon Sep 14 11:36:19 UTC 2026
vm-test-run-update-hardware-configuration> target # [    0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/nzvg05gsj9z9wgzk0912dww5v6ah4pzh-nixos-system-target-test/init regInfo=/nix/store/0jhf0vwrn0aw3glaf6rdk83y4ngvlcws-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-provided physical RAM map:
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd4fff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000007ffd5000-0x000000007fffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013e7fffff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] NX (Execute Disable) protection: active
vm-test-run-update-hardware-configuration> target # [    0.000000] APIC: Static calls initialized
vm-test-run-update-hardware-configuration> target # [    0.000000] SMBIOS 2.8 present.
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: Memory slots populated: 1/1
vm-test-run-update-hardware-configuration> target # [    0.000000] Hypervisor detected: KVM
vm-test-run-update-hardware-configuration> target # [    0.000000] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
vm-test-run-update-hardware-configuration> target # [    0.000001] kvm-clock: using sched offset of 452578572 cycles
vm-test-run-update-hardware-configuration> target # [    0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
vm-test-run-update-hardware-configuration> target # [    0.000006] tsc: Detected 4192.120 MHz processor
vm-test-run-update-hardware-configuration> target # [    0.000629] last_pfn = 0x13e800 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000661] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
vm-test-run-update-hardware-configuration> target # [    0.000664] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
vm-test-run-update-hardware-configuration> target # [    0.000707] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.002372] found SMP MP-table at [mem 0x000f5450-0x000f545f]
vm-test-run-update-hardware-configuration> target # [    0.002410] Using GB pages for direct mapping
vm-test-run-update-hardware-configuration> target # [    0.002538] RAMDISK: [mem 0x7e36e000-0x7ffcffff]
vm-test-run-update-hardware-configuration> target # [    0.002546] ACPI: Early table checksum verification disabled
vm-test-run-update-hardware-configuration> target # [    0.002550] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS )
vm-test-run-update-hardware-configuration> target # [    0.002555] ACPI: RSDT 0x000000007FFE2433 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002560] ACPI: FACP 0x000000007FFE222B 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002567] ACPI: DSDT 0x000000007FFE0040 0021EB (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002569] ACPI: FACS 0x000000007FFE0000 000040
vm-test-run-update-hardware-configuration> target # [    0.002570] ACPI: APIC 0x000000007FFE231F 000078 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002572] ACPI: HPET 0x000000007FFE2397 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002573] ACPI: MCFG 0x000000007FFE23CF 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002575] ACPI: WAET 0x000000007FFE240B 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002576] ACPI: Reserving FACP table memory at [mem 0x7ffe222b-0x7ffe231e]
vm-test-run-update-hardware-configuration> target # [    0.002577] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe222a]
vm-test-run-update-hardware-configuration> target # [    0.002577] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
vm-test-run-update-hardware-configuration> target # [    0.002578] ACPI: Reserving APIC table memory at [mem 0x7ffe231f-0x7ffe2396]
vm-test-run-update-hardware-configuration> target # [    0.002578] ACPI: Reserving HPET table memory at [mem 0x7ffe2397-0x7ffe23ce]
vm-test-run-update-hardware-configuration> target # [    0.002579] ACPI: Reserving MCFG table memory at [mem 0x7ffe23cf-0x7ffe240a]
vm-test-run-update-hardware-configuration> target # [    0.002579] ACPI: Reserving WAET table memory at [mem 0x7ffe240b-0x7ffe2432]
vm-test-run-update-hardware-configuration> target # [    0.002958] No NUMA configuration found
vm-test-run-update-hardware-configuration> target # [    0.002960] Faking a node at [mem 0x0000000000000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002962] NODE_DATA(0) allocated [mem 0x13e7f8780-0x13e7fdcff]
vm-test-run-update-hardware-configuration> target # [    0.003055] Zone ranges:
vm-test-run-update-hardware-configuration> target # [    0.003055]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
vm-test-run-update-hardware-configuration> target # [    0.003057]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
vm-test-run-update-hardware-configuration> target # [    0.003058]   Normal   [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003060]   Device   empty
vm-test-run-update-hardware-configuration> target # [    0.003061] Movable zone start for each node
vm-test-run-update-hardware-configuration> target # [    0.003062] Early memory node ranges
vm-test-run-update-hardware-configuration> target # [    0.003062]   node   0: [mem 0x0000000000001000-0x000000000009efff]
vm-test-run-update-hardware-configuration> target # [    0.003063]   node   0: [mem 0x0000000000100000-0x000000007ffd4fff]
vm-test-run-update-hardware-configuration> target # [    0.003064]   node   0: [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003065] Initmem setup node 0 [mem 0x0000000000001000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003086] On node 0, zone DMA: 1 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.003292] On node 0, zone DMA: 97 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.045009] On node 0, zone Normal: 43 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.045328] On node 0, zone Normal: 6144 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.046216] ACPI: PM-Timer IO Port: 0x608
vm-test-run-update-hardware-configuration> target # [    0.046234] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
vm-test-run-update-hardware-configuration> target # [    0.046261] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
vm-test-run-update-hardware-configuration> target # [    0.046264] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
vm-test-run-update-hardware-configuration> target # [    0.046266] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
vm-test-run-update-hardware-configuration> target # [    0.046267] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
vm-test-run-update-hardware-configuration> target # [    0.046269] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
vm-test-run-update-hardware-configuration> target # [    0.046269] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
vm-test-run-update-hardware-configuration> target # [    0.046272] ACPI: Using ACPI (MADT) for SMP configuration information
vm-test-run-update-hardware-configuration> target # [    0.046274] ACPI: HPET id: 0x8086a201 base: 0xfed00000
vm-test-run-update-hardware-configuration> target # [    0.046283] TSC deadline timer available
vm-test-run-update-hardware-configuration> target # [    0.046296] CPU topo: Max. logical packages:   1
vm-test-run-update-hardware-configuration> target # [    0.046297] CPU topo: Max. logical dies:       1
vm-test-run-update-hardware-configuration> target # [    0.046298] CPU topo: Max. dies per package:   1
vm-test-run-update-hardware-configuration> target # [    0.046313] CPU topo: Max. threads per core:   1
vm-test-run-update-hardware-configuration> target # [    0.046314] CPU topo: Num. cores per package:     1
vm-test-run-update-hardware-configuration> target # [    0.046315] CPU topo: Num. threads per package:   1
vm-test-run-update-hardware-configuration> target # [    0.046315] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs
vm-test-run-update-hardware-configuration> target # [    0.046340] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
vm-test-run-update-hardware-configuration> target # [    0.046373] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
vm-test-run-update-hardware-configuration> target # [    0.046374] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
vm-test-run-update-hardware-configuration> target # [    0.046375] PM: hibernation: Registered nosave memory: [mem 0x7ffd5000-0xffffffff]
vm-test-run-update-hardware-configuration> target # [    0.046376] [mem 0xc0000000-0xfed1bfff] available for PCI devices
vm-test-run-update-hardware-configuration> target # [    0.046377] Booting paravirtualized kernel on KVM
vm-test-run-update-hardware-configuration> target # [    0.046383] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
vm-test-run-update-hardware-configuration> target # [    0.050723] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
vm-test-run-update-hardware-configuration> target # [    0.052715] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152
vm-test-run-update-hardware-configuration> target # [    0.052773] kvm-guest: PV spinlocks disabled, single CPU
vm-test-run-update-hardware-configuration> target # [    0.052776] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/nzvg05gsj9z9wgzk0912dww5v6ah4pzh-nixos-system-target-test/init regInfo=/nix/store/0jhf0vwrn0aw3glaf6rdk83y4ngvlcws-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.052862] Unknown kernel command line parameters "regInfo=/nix/store/0jhf0vwrn0aw3glaf6rdk83y4ngvlcws-closure-info/registration", will be passed to user space.
vm-test-run-update-hardware-configuration> target # [    0.053060] random: crng init done
vm-test-run-update-hardware-configuration> target # [    0.053060] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
vm-test-run-update-hardware-configuration> target # [    0.056506] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.058183] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.058241] software IO TLB: area num 1.
vm-test-run-update-hardware-configuration> target # [    0.122551] Fallback order for Node 0: 0
vm-test-run-update-hardware-configuration> target # [    0.122562] Built 1 zonelists, mobility grouping on.  Total pages: 780147
vm-test-run-update-hardware-configuration> target # [    0.122564] Policy zone: Normal
vm-test-run-update-hardware-configuration> target # [    0.124627] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
vm-test-run-update-hardware-configuration> target # [    0.131259] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
vm-test-run-update-hardware-configuration> target # [    0.136610] allocated 6291456 bytes of page_ext
vm-test-run-update-hardware-configuration> target # [    0.150821] ftrace: allocating 48787 entries in 192 pages
vm-test-run-update-hardware-configuration> target # [    0.150827] ftrace: allocated 192 pages with 2 groups
vm-test-run-update-hardware-configuration> target # [    0.151738] Dynamic Preempt: lazy
vm-test-run-update-hardware-configuration> target # [    0.151845] rcu: Preemptible hierarchical RCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.151846] rcu: 	RCU event tracing is enabled.
vm-test-run-update-hardware-configuration> target # [    0.151846] rcu: 	RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.151848] 	Trampoline variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.151849] 	Rude variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.151850] 	Tracing variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.151851] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
vm-test-run-update-hardware-configuration> target # [    0.151852] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
vm-test-run-update-hardware-configuration> target # [    0.151885] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.151887] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.151887] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.155974] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16
vm-test-run-update-hardware-configuration> target # [    0.156274] rcu: srcu_init: Setting srcu_struct sizes based on contention.
vm-test-run-update-hardware-configuration> target # [    0.156286] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
vm-test-run-update-hardware-configuration> target # [    0.156507] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
vm-test-run-update-hardware-configuration> target # [    0.162026] Console: colour VGA+ 80x25
vm-test-run-update-hardware-configuration> target # [    0.162033] printk: legacy console [tty0] enabled
vm-test-run-update-hardware-configuration> target # [    0.195480] printk: legacy console [ttyS0] enabled
vm-test-run-update-hardware-configuration> target # [    0.344368] ACPI: Core revision 20250807
vm-test-run-update-hardware-configuration> target # [    0.345551] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
vm-test-run-update-hardware-configuration> target # [    0.347745] APIC: Switch to symmetric I/O mode setup
vm-test-run-update-hardware-configuration> target # [    0.349174] x2apic enabled
vm-test-run-update-hardware-configuration> target # [    0.350132] APIC: Switched APIC routing to: physical x2apic
vm-test-run-update-hardware-configuration> target # [    0.352783] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
vm-test-run-update-hardware-configuration> target # [    0.354239] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d4d0b6d3, max_idle_ns: 440795255641 ns
vm-test-run-update-hardware-configuration> target # [    0.356567] Calibrating delay loop (skipped) preset value.. 8384.24 BogoMIPS (lpj=4192120)
vm-test-run-update-hardware-configuration> target # [    0.358714] x86/cpu: User Mode Instruction Prevention (UMIP) activated
vm-test-run-update-hardware-configuration> target # [    0.360712] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
vm-test-run-update-hardware-configuration> target # [    0.361562] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
vm-test-run-update-hardware-configuration> target # [    0.363569] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
vm-test-run-update-hardware-configuration> target # [    0.365566] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
vm-test-run-update-hardware-configuration> target # [    0.367564] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
vm-test-run-update-hardware-configuration> target # [    0.369564] Speculative Return Stack Overflow: Mitigation: Safe RET
vm-test-run-update-hardware-configuration> target # [    0.370564] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
vm-test-run-update-hardware-configuration> target # [    0.371578] Spectre V2 : Enabling IBPB for BPF
vm-test-run-update-hardware-configuration> target # [    0.372569] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
vm-test-run-update-hardware-configuration> target # [    0.373565] active return thunk: srso_alias_return_thunk
vm-test-run-update-hardware-configuration> target # [    0.374610] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
vm-test-run-update-hardware-configuration> target # [    0.375563] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
vm-test-run-update-hardware-configuration> target # [    0.376563] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
vm-test-run-update-hardware-configuration> target # [    0.377563] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
vm-test-run-update-hardware-configuration> target # [    0.378563] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
vm-test-run-update-hardware-configuration> target # [    0.379563] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
vm-test-run-update-hardware-configuration> target # [    0.380570] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
vm-test-run-update-hardware-configuration> target # [    0.382562] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
vm-test-run-update-hardware-configuration> target # [    0.383562] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
vm-test-run-update-hardware-configuration> target # [    0.384564] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
vm-test-run-update-hardware-configuration> target # [    0.385562] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
vm-test-run-update-hardware-configuration> target # [    0.387563] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
vm-test-run-update-hardware-configuration> target # [    0.388562] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
vm-test-run-update-hardware-configuration> target # [    0.390562] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
vm-test-run-update-hardware-configuration> target # [    0.391562] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16
vm-test-run-update-hardware-configuration> target # [    0.392562] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]:   24
vm-test-run-update-hardware-configuration> target # [    0.393562] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.
vm-test-run-update-hardware-configuration> target # [    0.440869] Freeing SMP alternatives memory: 44K
vm-test-run-update-hardware-configuration> target # [    0.441570] pid_max: default: 32768 minimum: 301
vm-test-run-update-hardware-configuration> target # [    0.442678] LSM: initializing lsm=capability,landlock,yama,bpf,ima
vm-test-run-update-hardware-configuration> target # [    0.444725] landlock: Up and running.
vm-test-run-update-hardware-configuration> target # [    0.445563] Yama: becoming mindful.
vm-test-run-update-hardware-configuration> target # [    0.446965] LSM support for eBPF active
vm-test-run-update-hardware-configuration> target # [    0.447839] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.449665] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.453506] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2)
vm-test-run-update-hardware-configuration> target # [    0.454399] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
vm-test-run-update-hardware-configuration> target # [    0.455573] ... version:                   2
vm-test-run-update-hardware-configuration> target # [    0.456609] ... bit width:                 48
vm-test-run-update-hardware-configuration> target # [    0.457565] ... generic counters:          6
vm-test-run-update-hardware-configuration> target # [    0.458565] ... generic bitmap:            000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.459565] ... fixed-purpose counters:    0
vm-test-run-update-hardware-configuration> target # [    0.460565] ... fixed-purpose bitmap:      0000000000000000
vm-test-run-update-hardware-configuration> target # [    0.461564] ... value mask:                0000ffffffffffff
vm-test-run-update-hardware-configuration> target # [    0.462565] ... max period:                00007fffffffffff
vm-test-run-update-hardware-configuration> target # [    0.463564] ... global_ctrl mask:          000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.464725] signal: max sigframe size: 3376
vm-test-run-update-hardware-configuration> target # [    0.465761] rcu: Hierarchical SRCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.466574] rcu: 	Max phase no-delay instances is 400.
vm-test-run-update-hardware-configuration> target # [    0.472314] smp: Bringing up secondary CPUs ...
vm-test-run-update-hardware-configuration> target # [    0.473451] smp: Brought up 1 node, 1 CPU
vm-test-run-update-hardware-configuration> target # [    0.474312] smpboot: Total of 1 processors activated (8384.24 BogoMIPS)
vm-test-run-update-hardware-configuration> target # [    0.475858] Memory: 2906924K/3120588K available (17247K kernel code, 2727K rwdata, 13616K rodata, 3652K init, 2976K bss, 201260K reserved, 0K cma-reserved)
vm-test-run-update-hardware-configuration> target # [    0.477013] devtmpfs: initialized
vm-test-run-update-hardware-configuration> target # [    0.477816] x86/mm: Memory block size: 128MB
vm-test-run-update-hardware-configuration> target # [    0.479890] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.480615] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).
vm-test-run-update-hardware-configuration> target # [    0.481685] pinctrl core: initialized pinctrl subsystem
vm-test-run-update-hardware-configuration> target # [    0.482979] PM: RTC time: 10:02:30, date: 2026-09-19
vm-test-run-update-hardware-configuration> target # [    0.486528] NET: Registered PF_NETLINK/PF_ROUTE protocol family
vm-test-run-update-hardware-configuration> target # [    0.488324] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.489678] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.491153] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.491587] audit: initializing netlink subsys (disabled)
vm-test-run-update-hardware-configuration> target # [    0.492956] thermal_sys: Registered thermal governor 'fair_share'
vm-test-run-update-hardware-configuration> target # [    0.492958] thermal_sys: Registered thermal governor 'bang_bang'
vm-test-run-update-hardware-configuration> target # [    0.493565] thermal_sys: Registered thermal governor 'step_wise'
vm-test-run-update-hardware-configuration> target # [    0.494576] audit: type=2000 audit(1789812151.268:1): state=initialized audit_enabled=0 res=1
vm-test-run-update-hardware-configuration> target # [    0.496568] thermal_sys: Registered thermal governor 'user_space'
vm-test-run-update-hardware-configuration> target # [    0.496571] thermal_sys: Registered thermal governor 'power_allocator'
vm-test-run-update-hardware-configuration> target # [    0.497601] cpuidle: using governor menu
vm-test-run-update-hardware-configuration> target # [    0.500544] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vm-test-run-update-hardware-configuration> target # [    0.501894] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.502572] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
vm-test-run-update-hardware-configuration> target # [    0.503581] PCI: Using configuration type 1 for base access
vm-test-run-update-hardware-configuration> target # [    0.504879] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
vm-test-run-update-hardware-configuration> target # [    0.513773] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.514564] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
vm-test-run-update-hardware-configuration> target # [    0.519566] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.520565] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
vm-test-run-update-hardware-configuration> target # [    0.531054] ACPI: Added _OSI(Module Device)
vm-test-run-update-hardware-configuration> target # [    0.531565] ACPI: Added _OSI(Processor Device)
vm-test-run-update-hardware-configuration> target # [    0.532556] ACPI: Added _OSI(Processor Aggregator Device)
vm-test-run-update-hardware-configuration> target # [    0.539875] ACPI: 1 ACPI AML tables successfully acquired and loaded
vm-test-run-update-hardware-configuration> target # [    0.544036] ACPI: Interpreter enabled
vm-test-run-update-hardware-configuration> target # [    0.544591] ACPI: PM: (supports S0 S3 S4 S5)
vm-test-run-update-hardware-configuration> target # [    0.547563] ACPI: Using IOAPIC for interrupt routing
vm-test-run-update-hardware-configuration> target # [    0.548632] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
vm-test-run-update-hardware-configuration> target # [    0.551566] PCI: Using E820 reservations for host bridge windows
vm-test-run-update-hardware-configuration> target # [    0.552716] ACPI: Enabled 2 GPEs in block 00 to 3F
vm-test-run-update-hardware-configuration> target # [    0.557681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
vm-test-run-update-hardware-configuration> target # [    0.558576] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
vm-test-run-update-hardware-configuration> target # [    0.559643] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]
vm-test-run-update-hardware-configuration> target # [    0.560747] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
vm-test-run-update-hardware-configuration> target # [    0.562185] PCI host bridge to bus 0000:00
vm-test-run-update-hardware-configuration> target # [    0.562574] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.563567] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.564565] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.565565] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.566565] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.567566] pci_bus 0000:00: root bus resource [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.568567] pci_bus 0000:00: root bus resource [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.569707] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.571352] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.574683] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
vm-test-run-update-hardware-configuration> target # [    0.575590] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
vm-test-run-update-hardware-configuration> target # [    0.576605] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
vm-test-run-update-hardware-configuration> target # [    0.577886] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
vm-test-run-update-hardware-configuration> target # [    0.579495] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.582576] pci 0000:00:02.0: BAR 0 [io  0xc180-0xc19f]
vm-test-run-update-hardware-configuration> target # [    0.583576] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
vm-test-run-update-hardware-configuration> target # [    0.584605] pci 0000:00:02.0: BAR 4 [mem 0xe0000000000-0xe0000003fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.585577] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]
vm-test-run-update-hardware-configuration> target # [    0.587495] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.590556] pci 0000:00:03.0: BAR 0 [io  0xc1a0-0xc1bf]
vm-test-run-update-hardware-configuration> target # [    0.591577] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
vm-test-run-update-hardware-configuration> target # [    0.592603] pci 0000:00:03.0: BAR 4 [mem 0xe0000004000-0xe0000007fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.594552] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.597347] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
vm-test-run-update-hardware-configuration> target # [    0.598466] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
vm-test-run-update-hardware-configuration> target # [    0.599584] pci 0000:00:04.0: BAR 4 [mem 0xe0000008000-0xe000000bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.601564] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.603576] pci 0000:00:05.0: BAR 0 [io  0xc080-0xc0ff]
vm-test-run-update-hardware-configuration> target # [    0.604575] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]
vm-test-run-update-hardware-configuration> target # [    0.605605] pci 0000:00:05.0: BAR 4 [mem 0xe000000c000-0xe000000ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.607529] pci 0000:00:06.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.610575] pci 0000:00:06.0: BAR 0 [io  0xc1c0-0xc1df]
vm-test-run-update-hardware-configuration> target # [    0.611574] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]
vm-test-run-update-hardware-configuration> target # [    0.612605] pci 0000:00:06.0: BAR 4 [mem 0xe0000010000-0xe0000013fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.613575] pci 0000:00:06.0: ROM [mem 0xfeb80000-0xfebbffff pref]
vm-test-run-update-hardware-configuration> target # [    0.615552] pci 0000:00:07.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.617585] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]
vm-test-run-update-hardware-configuration> target # [    0.618612] pci 0000:00:07.0: BAR 4 [mem 0xe0000014000-0xe0000017fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.620584] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.622585] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]
vm-test-run-update-hardware-configuration> target # [    0.623604] pci 0000:00:08.0: BAR 4 [mem 0xe0000018000-0xe000001bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.625478] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.627531] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]
vm-test-run-update-hardware-configuration> target # [    0.628564] pci 0000:00:09.0: BAR 4 [mem 0xe000001c000-0xe000001ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.631502] pci 0000:00:0a.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.633529] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]
vm-test-run-update-hardware-configuration> target # [    0.634556] pci 0000:00:0a.0: BAR 4 [mem 0xe0000020000-0xe0000023fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.636463] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.638574] pci 0000:00:0b.0: BAR 0 [io  0xc100-0xc13f]
vm-test-run-update-hardware-configuration> target # [    0.639573] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]
vm-test-run-update-hardware-configuration> target # [    0.640606] pci 0000:00:0b.0: BAR 4 [mem 0xe0000024000-0xe0000027fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.642460] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.644889] pci 0000:00:0c.0: BAR 0 [io  0xc1e0-0xc1ff]
vm-test-run-update-hardware-configuration> target # [    0.645574] pci 0000:00:0c.0: BAR 1 [mem 0xfebdb000-0xfebdbfff]
vm-test-run-update-hardware-configuration> target # [    0.646604] pci 0000:00:0c.0: BAR 4 [mem 0xe0000028000-0xe000002bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.648463] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.650257] pci 0000:00:1d.0: BAR 4 [io  0xc200-0xc21f]
vm-test-run-update-hardware-configuration> target # [    0.650829] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.652485] pci 0000:00:1d.1: BAR 4 [io  0xc220-0xc23f]
vm-test-run-update-hardware-configuration> target # [    0.653664] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.655223] pci 0000:00:1d.2: BAR 4 [io  0xc240-0xc25f]
vm-test-run-update-hardware-configuration> target # [    0.655898] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.657226] pci 0000:00:1d.7: BAR 0 [mem 0xfebdc000-0xfebdcfff]
vm-test-run-update-hardware-configuration> target # [    0.657867] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.659047] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
vm-test-run-update-hardware-configuration> target # [    0.659901] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.661485] pci 0000:00:1f.2: BAR 4 [io  0xc260-0xc27f]
vm-test-run-update-hardware-configuration> target # [    0.662402] pci 0000:00:1f.2: BAR 5 [mem 0xfebdd000-0xfebddfff]
vm-test-run-update-hardware-configuration> target # [    0.664208] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.665215] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
vm-test-run-update-hardware-configuration> target # [    0.670278] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.670692] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.671683] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.672681] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.673689] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.674680] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.675684] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.676684] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.677612] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.678581] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.679580] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.680580] ACPI: PCI: Interrupt link GSID configured for IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.681586] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
vm-test-run-update-hardware-configuration> target # [    0.682576] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
vm-test-run-update-hardware-configuration> target # [    0.683575] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
vm-test-run-update-hardware-configuration> target # [    0.684579] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
vm-test-run-update-hardware-configuration> target # [    0.686380] iommu: Default domain type: Translated
vm-test-run-update-hardware-configuration> target # [    0.687329] iommu: DMA domain TLB invalidation policy: lazy mode
vm-test-run-update-hardware-configuration> target # [    0.687786] ACPI: bus type USB registered
vm-test-run-update-hardware-configuration> target # [    0.688614] usbcore: registered new interface driver usbfs
vm-test-run-update-hardware-configuration> target # [    0.689579] usbcore: registered new interface driver hub
vm-test-run-update-hardware-configuration> target # [    0.690573] usbcore: registered new device driver usb
vm-test-run-update-hardware-configuration> target # [    0.692248] NetLabel: Initializing
vm-test-run-update-hardware-configuration> target # [    0.692568] NetLabel:  domain hash size = 128
vm-test-run-update-hardware-configuration> target # [    0.693464] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
vm-test-run-update-hardware-configuration> target # [    0.694495] NetLabel:  unlabeled traffic allowed by default
vm-test-run-update-hardware-configuration> target # [    0.695458] PCI: Using ACPI for IRQ routing
vm-test-run-update-hardware-configuration> target # [    0.770779] pci 0000:00:01.0: vgaarb: setting as boot VGA device
vm-test-run-update-hardware-configuration> target # [    0.771560] pci 0000:00:01.0: vgaarb: bridge control possible
vm-test-run-update-hardware-configuration> target # [    0.771560] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vm-test-run-update-hardware-configuration> target # [    0.771566] vgaarb: loaded
vm-test-run-update-hardware-configuration> target # [    0.772361] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
vm-test-run-update-hardware-configuration> target # [    0.773340] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
vm-test-run-update-hardware-configuration> target # [    0.775643] clocksource: Switched to clocksource kvm-clock
vm-test-run-update-hardware-configuration> target # [    0.778757] VFS: Disk quotas dquot_6.6.0
vm-test-run-update-hardware-configuration> target # [    0.779621] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
vm-test-run-update-hardware-configuration> target # [    0.781174] pnp: PnP ACPI init
vm-test-run-update-hardware-configuration> target # [    0.782048] ACPI: IRQ 4 override to edge(!), high(!)
vm-test-run-update-hardware-configuration> target # [    0.783174] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
vm-test-run-update-hardware-configuration> target # [    0.784959] pnp: PnP ACPI: found 5 devices
vm-test-run-update-hardware-configuration> target # [    0.792074] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
vm-test-run-update-hardware-configuration> target # [    0.793815] clocksource: Switched to clocksource acpi_pm
vm-test-run-update-hardware-configuration> target # [    0.794980] NET: Registered PF_INET protocol family
vm-test-run-update-hardware-configuration> target # [    0.796486] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.809538] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.811361] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.812922] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.815348] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.816877] TCP: Hash tables configured (established 32768 bind 32768)
vm-test-run-update-hardware-configuration> target # [    0.818229] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.819777] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.821120] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.822663] NET: Registered PF_UNIX/PF_LOCAL protocol family
vm-test-run-update-hardware-configuration> target # [    0.823827] NET: Registered PF_XDP protocol family
vm-test-run-update-hardware-configuration> target # [    0.824845] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.826073] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.827327] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.828674] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.830020] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.831367] pci_bus 0000:00: resource 9 [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.833406] ACPI: \_SB_.GSIA: Enabled at IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.835535] ACPI: \_SB_.GSIB: Enabled at IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.837434] ACPI: \_SB_.GSIC: Enabled at IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.839255] ACPI: \_SB_.GSID: Enabled at IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.840944] PCI: CLS 0 bytes, default 64
vm-test-run-update-hardware-configuration> target # [    0.841872] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
vm-test-run-update-hardware-configuration> target # [    0.843232] Trying to unpack rootfs image as initramfs...
vm-test-run-update-hardware-configuration> target # [    0.849310] software IO TLB: mapped [mem 0x000000007a36e000-0x000000007e36e000] (64MB)
vm-test-run-update-hardware-configuration> target # [    0.850994] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d4d0b6d3, max_idle_ns: 440795255641 ns
vm-test-run-update-hardware-configuration> target # [    0.883327] Initialise system trusted keyrings
vm-test-run-update-hardware-configuration> target # [    0.886346] workingset: timestamp_bits=40 max_order=20 bucket_order=0
vm-test-run-update-hardware-configuration> target # [    0.903729] Key type asymmetric registered
vm-test-run-update-hardware-configuration> target # [    0.906318] Asymmetric key parser 'x509' registered
vm-test-run-update-hardware-configuration> target # [    0.907361] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
vm-test-run-update-hardware-configuration> target # [    0.912448] io scheduler mq-deadline registered
vm-test-run-update-hardware-configuration> target # [    0.913447] io scheduler kyber registered
vm-test-run-update-hardware-configuration> target # [    0.916830] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
vm-test-run-update-hardware-configuration> target # [    0.920317] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
vm-test-run-update-hardware-configuration> target # [    0.925962] Linux agpgart interface v0.103
vm-test-run-update-hardware-configuration> target # [    0.926891] ACPI: bus type drm_connector registered
vm-test-run-update-hardware-configuration> target # [    0.929670] usbcore: registered new interface driver usbserial_generic
vm-test-run-update-hardware-configuration> target # [    0.930970] usbserial: USB Serial support registered for generic
vm-test-run-update-hardware-configuration> target # [    0.934312] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.
vm-test-run-update-hardware-configuration> target # [    0.934312] Please enable it if your BIOS has the CPPC option.
vm-test-run-update-hardware-configuration> target # [    0.936948] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
vm-test-run-update-hardware-configuration> target # [    0.942453] drop_monitor: Initializing network drop monitor service
vm-test-run-update-hardware-configuration> target # [    0.943812] NET: Registered PF_INET6 protocol family
vm-test-run-update-hardware-configuration> target # [    0.947739] Segment Routing with IPv6
vm-test-run-update-hardware-configuration> target # [    0.951315] In-situ OAM (IOAM) with IPv6
vm-test-run-update-hardware-configuration> target # [    0.952480] IPI shorthand broadcast: enabled
vm-test-run-update-hardware-configuration> target # [    0.957925] sched_clock: Marking stable (763029106, 194274253)->(1069240239, -111936880)
vm-test-run-update-hardware-configuration> target # [    0.965470] registered taskstats version 1
vm-test-run-update-hardware-configuration> target # [    0.966536] Loading compiled-in X.509 certificates
vm-test-run-update-hardware-configuration> target # [    0.981660] Demotion targets for Node 0: null
vm-test-run-update-hardware-configuration> target # [    0.982726] Key type .fscrypt registered
vm-test-run-update-hardware-configuration> target # [    0.985300] Key type fscrypt-provisioning registered
vm-test-run-update-hardware-configuration> target # [    0.986407] ima: No TPM chip found, activating TPM-bypass!
vm-test-run-update-hardware-configuration> target # [    0.989312] ima: Allocated hash algorithm: sha1
vm-test-run-update-hardware-configuration> target # [    0.990248] ima: No architecture policies found
vm-test-run-update-hardware-configuration> target # [    0.993433] PM:   Magic number: 10:467:22
vm-test-run-update-hardware-configuration> target # [    0.994962] RAS: Correctable Errors collector initialized.
vm-test-run-update-hardware-configuration> target # [    1.005024] clk: Disabling unused clocks
vm-test-run-update-hardware-configuration> target # [    1.005913] PM: genpd: Disabling unused power domains
vm-test-run-update-hardware-configuration> target # [    1.155628] Freeing initrd memory: 29064K
vm-test-run-update-hardware-configuration> target # [    1.158635] Freeing unused decrypted memory: 2028K
vm-test-run-update-hardware-configuration> target # [    1.161612] Freeing unused kernel image (initmem) memory: 3652K
vm-test-run-update-hardware-configuration> target # [    1.163039] Write protecting the kernel read-only data: 32768k
vm-test-run-update-hardware-configuration> target # [    1.165450] Freeing unused kernel image (text/rodata gap) memory: 1184K
vm-test-run-update-hardware-configuration> target # [    1.167607] Freeing unused kernel image (rodata/data gap) memory: 720K
vm-test-run-update-hardware-configuration> target # [    1.202102] x86/mm: Checked W+X mappings: passed, no W+X pages found.
vm-test-run-update-hardware-configuration> target # [    1.203637] Run /init as init process
vm-test-run-update-hardware-configuration> target # [    1.214853] systemd[1]: Inserted module 'autofs4'
vm-test-run-update-hardware-configuration> target # [    1.232879] fuse: init (API version 7.45)
vm-test-run-update-hardware-configuration> target # [    1.240452] ACPI: \_SB_.GSIG: Enabled at IRQ 22
vm-test-run-update-hardware-configuration> target # [    1.243444] ACPI: \_SB_.GSIH: Enabled at IRQ 23
vm-test-run-update-hardware-configuration> target # [    1.246855] ACPI: \_SB_.GSIE: Enabled at IRQ 20
vm-test-run-update-hardware-configuration> target # [    1.249585] ACPI: \_SB_.GSIF: Enabled at IRQ 21
vm-test-run-update-hardware-configuration> target # [    1.256989] virtiofs virtio6: discovered new tag: nix-store
vm-test-run-update-hardware-configuration> target # [    1.259344] virtiofs virtio6: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.267809] virtiofs virtio7: discovered new tag: shared
vm-test-run-update-hardware-configuration> target # [    1.269901] virtiofs virtio7: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.282167] virtiofs virtio8: discovered new tag: xchg
vm-test-run-update-hardware-configuration> target # [    1.284242] virtiofs virtio8: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.304141] systemd[1]: Successfully made /usr/ read-only.
vm-test-run-update-hardware-configuration> target # [    1.640224] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    1.646352] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    1.647469] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    1.648593] systemd[1]: Running in initrd.
vm-test-run-update-hardware-configuration> target # [    1.649853] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    1.651377] systemd[1]: Hostname set to <target>.
vm-test-run-update-hardware-configuration> target # [    1.823481] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    1.857157] systemd[1]: Queued start job for default target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    1.861669] systemd[1]: Created slice Slice /system/modprobe.
vm-test-run-update-hardware-configuration> target # [    1.863468] systemd[1]: Created slice Slice /system/systemd-makefs.
vm-test-run-update-hardware-configuration> target # [    1.864935] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    1.866748] systemd[1]: Expecting device /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    1.867984] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    1.869153] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    1.870376] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    1.871576] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    1.872962] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    1.874715] systemd[1]: Listening on Journal Socket (/dev/log).
vm-test-run-update-hardware-configuration> target # [    1.876365] systemd[1]: Listening on Journal Sockets.
vm-test-run-update-hardware-configuration> target # [    1.877812] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    1.879353] systemd[1]: Listening on udev Kernel Socket.
vm-test-run-update-hardware-configuration> target # [    1.880762] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    1.883221] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    1.889381] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    1.901388] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    1.912386] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    1.916402] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    1.926443] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    1.944025] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    1.949059] systemd-journald[66]: Collecting audit messages is disabled.
vm-test-run-update-hardware-configuration> target # [    1.951122] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    1.957819] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    1.962836] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config
vm-test-run-update-hardware-configuration> target # [    1.969013] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
vm-test-run-update-hardware-configuration> target # [    1.976056] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    1.980481] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
vm-test-run-update-hardware-configuration> target # [    2.009929] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    2.017117] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    2.029356] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    2.039443] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    2.050396] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    2.063913] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    2.069571] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    2.074404] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    2.081585] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    1.913496] systemd-modules-load[67]: Inserted module 'dm_mod'[    2.110468] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # [    1.918423] systemd-modules-load[67]: Inserted module 'virtio_balloon'
vm-test-run-update-hardware-configuration> target # [    1.919752] systemd-modules-load[67]: Inserted module 'virtio_gpu'
vm-test-run-update-hardware-configuration> target # [    1.929074] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    1.949515] systemd-udevd[74]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    1.969274] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    1.986100] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    2.007933] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    2.010128] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    2.011230] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    2.427032] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
vm-test-run-update-hardware-configuration> target # [    2.432924] virtio_blk virtio2: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.442109] serio: i8042 KBD port at 0x60,0x64 irq 1
vm-test-run-update-hardware-configuration> target # [    2.447057] virtio_blk virtio2: [vda] 16777216 512-byte logical blocks (8.59 GB/8.00 GiB)
vm-test-run-update-hardware-configuration> target # [    2.453438] serio: i8042 AUX port at 0x60,0x64 irq 12
vm-test-run-update-hardware-configuration> target # [    2.466168] ehci-pci 0000:00:1d.7: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.467035] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
vm-test-run-update-hardware-configuration> target # [    2.468916] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdc000
vm-test-run-update-hardware-configuration> target # [    2.476322] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
vm-test-run-update-hardware-configuration> target # [    2.477603] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.479085] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.482193] usb usb1: Product: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.483299] usb usb1: Manufacturer: Linux 6.18.52 ehci_hcd
vm-test-run-update-hardware-configuration> target # [    2.484163] usb usb1: SerialNumber: 0000:00:1d.7
vm-test-run-update-hardware-configuration> target # [    2.486662] hub 1-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.488322] hub 1-0:1.0: 6 ports detected
vm-test-run-update-hardware-configuration> target # [    2.489739] virtio_blk virtio3: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.492804] uhci_hcd 0000:00:1d.0: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.500471] virtio_blk virtio3: [vdb] 1048576 512-byte logical blocks (537 MB/512 MiB)
vm-test-run-update-hardware-configuration> target # [    2.512172] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
vm-test-run-update-hardware-configuration> target # [    2.524326] uhci_hcd 0000:00:1d.0: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.525238] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200
vm-test-run-update-hardware-configuration> target # [    2.341354] (udev-worker)[97]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.344370] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    2.346344] (udev-worker)[101]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.548960] SCSI subsystem initialized
vm-test-run-update-hardware-configuration> target # [    2.559360] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.560637] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.377323] systemd-vconsole-setup[105]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [    2.576383] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
vm-test-run-update-hardware-configuration> target # [    2.384628] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    2.596546] usb usb2: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.604233] usb usb2: Manufacturer: Linux 6.18.52 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.609307] usb usb2: SerialNumber: 0000:00:1d.0
vm-test-run-update-hardware-configuration> target # [    2.613814] hub 2-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.620650] hub 2-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.434080] systemd[1]: Found device /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.435408] systemd[1]: Reached target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    2.630636] uhci_hcd 0000:00:1d.1: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.631519] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
vm-test-run-update-hardware-configuration> target # [    2.440102] systemd[1]: Starting Make File System on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.639314] uhci_hcd 0000:00:1d.1: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.640242] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220
vm-test-run-update-hardware-configuration> target # [    2.649463] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.652348] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.655216] usb usb3: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.656640] usb usb3: Manufacturer: Linux 6.18.52 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.465578] systemd-makefs[110]: Formatting /dev/vdb as ext4
vm-test-run-update-hardware-configuration> target # [    2.667452] usb usb3: SerialNumber: 0000:00:1d.1
vm-test-run-update-hardware-configuration> target # [    2.668685] hub 3-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.670888] hub 3-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.676664] uhci_hcd 0000:00:1d.2: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.677532] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
vm-test-run-update-hardware-configuration> target # [    2.679866] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
vm-test-run-update-hardware-configuration> target # [    2.681164] uhci_hcd 0000:00:1d.2: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.682538] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240
vm-test-run-update-hardware-configuration> target # [    2.683796] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
vm-test-run-update-hardware-configuration> target # [    2.685314] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.686610] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.687975] ahci 0000:00:1f.2: flags: 64bit ncq only
vm-test-run-update-hardware-configuration> target # [    2.692159] usb usb4: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.693088] scsi host0: ahci
vm-test-run-update-hardware-configuration> target # [    2.694911] usb usb4: Manufacturer: Linux 6.18.52 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.696097] scsi host1: ahci
vm-test-run-update-hardware-configuration> target # [    2.696848] scsi host2: ahci
vm-test-run-update-hardware-configuration> target # [    2.698751] usb usb4: SerialNumber: 0000:00:1d.2
vm-test-run-update-hardware-configuration> target # [    2.700327] scsi host3: ahci
vm-test-run-update-hardware-configuration> target # [    2.702240] scsi host4: ahci
vm-test-run-update-hardware-configuration> target # [    2.703934] hub 4-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.705917] hub 4-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.706945] scsi host5: ahci
vm-test-run-update-hardware-configuration> target # [    2.708163] ata1: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd100 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.717000] ata2: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd180 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.723677] ata3: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd200 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.727306] usb 1-1: new high-speed USB device number 2 using ehci-pci
vm-test-run-update-hardware-configuration> target # [    2.729685] ata4: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd280 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.733427] ata5: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd300 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.734806] ata6: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd380 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.857345] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
vm-test-run-update-hardware-configuration> target # [    2.858738] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
vm-test-run-update-hardware-configuration> target # [    2.860224] usb 1-1: Product: QEMU USB Tablet
vm-test-run-update-hardware-configuration> target # [    2.861087] usb 1-1: Manufacturer: QEMU
vm-test-run-update-hardware-configuration> target # [    2.861879] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1
vm-test-run-update-hardware-configuration> target # [    2.877048] hid: raw HID events driver (C) Jiri Kosina
vm-test-run-update-hardware-configuration> target # [    2.699531] systemd-makefs[110]: /dev/vdb successfully formatted as ext4 (label "vdb", uuid afbc5179-b21e-4330-b68c-b2bffa36da8b)
vm-test-run-update-hardware-configuration> target # [    2.704071] systemd[1]: Finished Make File System on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.705926] systemd[1]: Starting File System Check on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.735543] systemd-fsck[139]: vdb: clean, 12/32768 files, 6385/131072 blocks
vm-test-run-update-hardware-configuration> target # [    2.773983] systemd[1]: Finished File System Check on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.779073] systemd[1]: Mounting /sysroot...
vm-test-run-update-hardware-configuration> target # [    3.048772] ata6: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.049972] ata1: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.051293] ata5: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.052495] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.053623] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
vm-test-run-update-hardware-configuration> target # [    3.054940] ata3.00: applying bridge limits
vm-test-run-update-hardware-configuration> target # [    3.055926] ata4: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.057080] ata2: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.058175] ata3.00: configured for UDMA/100
vm-test-run-update-hardware-configuration> target # [    3.059402] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
vm-test-run-update-hardware-configuration> target # [    3.113397] usbcore: registered new interface driver usbhid
vm-test-run-update-hardware-configuration> target # [    3.117106] usbhid: USB HID core driver
vm-test-run-update-hardware-configuration> target # [    3.128970] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2
vm-test-run-update-hardware-configuration> target # [    3.136440] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
vm-test-run-update-hardware-configuration> target # [    3.140523] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
vm-test-run-update-hardware-configuration> target # [    3.161806] EXT4-fs (vdb): mounted filesystem afbc5179-b21e-4330-b68c-b2bffa36da8b r/w with ordered data mode. Quota mode: none.
vm-test-run-update-hardware-configuration> target # [    2.971315] systemd[1]: Mounted /sysroot.
vm-test-run-update-hardware-configuration> target # [    3.166497] cdrom: Uniform CD-ROM driver Revision: 3.20
vm-test-run-update-hardware-configuration> target # [    2.973934] systemd[1]: Reached target Initrd Root File System.
vm-test-run-update-hardware-configuration> target # [    2.976413] systemd[1]: Starting Mountpoints Configured in the Real Root...
vm-test-run-update-hardware-configuration> target # [    2.992671] systemd-sysroot-fstab-check[149]: /sysroot should be mounted in the initrd, will request daemon-reload.
vm-test-run-update-hardware-configuration> target # [    2.995951] systemd[1]: Reload requested from client PID 149 ('systemd-sysroot') (unit initrd-parse-etc.service)...
vm-test-run-update-hardware-configuration> target # [    2.998165] systemd[1]: Reloading...
vm-test-run-update-hardware-configuration> target # [    3.071196] systemd[1]: Reloading finished in 72 ms.
vm-test-run-update-hardware-configuration> target # [    3.078185] systemd-sysroot-fstab-check[149]: Requesting initrd-fs.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    3.081160] systemd-sysroot-fstab-check[149]: Requesting swap.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    3.086721] systemd[1]: initrd-parse-etc.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.088438] systemd[1]: Finished Mountpoints Configured in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.089673] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.
vm-test-run-update-hardware-configuration> target # [    3.744841] systemd[1]: Mounting /sysroot/nix/.ro-store...
vm-test-run-update-hardware-configuration> target # [    3.748137] systemd[1]: Mounting /sysroot/nix/.rw-store...
vm-test-run-update-hardware-configuration> target # [    3.751129] systemd[1]: Mounting /sysroot/run...
vm-test-run-update-hardware-configuration> target # [    3.756301] systemd[1]: Mounting /sysroot/tmp/shared...
vm-test-run-update-hardware-configuration> target # [    3.761201] systemd[1]: Mounting /sysroot/tmp/xchg...
vm-test-run-update-hardware-configuration> target # [    3.785755] systemd[1]: Mounted /sysroot/nix/.ro-store.
vm-test-run-update-hardware-configuration> target # [    3.790205] systemd[1]: Mounted /sysroot/nix/.rw-store.
vm-test-run-update-hardware-configuration> target # [    3.791206] systemd[1]: Mounted /sysroot/run.
vm-test-run-update-hardware-configuration> target # [    3.792048] systemd[1]: Mounted /sysroot/tmp/shared.
vm-test-run-update-hardware-configuration> target # [    3.799145] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    3.800269] systemd[1]: Mounted /sysroot/tmp/xchg.
vm-test-run-update-hardware-configuration> target # [    3.809689] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.811588] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    3.813953] systemd[1]: Mounting /sysroot/nix/store...
vm-test-run-update-hardware-configuration> target # [    3.832424] systemd[1]: Mounted /sysroot/nix/store.
vm-test-run-update-hardware-configuration> target # [    3.833765] systemd[1]: Reached target Initrd File Systems.
vm-test-run-update-hardware-configuration> target # [    3.836114] systemd[1]: Starting Find NixOS closure...
vm-test-run-update-hardware-configuration> target # [    3.839130] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...
vm-test-run-update-hardware-configuration> target # [    3.857242] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.861602] systemd[1]: Finished Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    3.863287] systemd[1]: Reached target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    3.864960] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...
vm-test-run-update-hardware-configuration> target # [    3.878397] systemd[1]: Stopped target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    3.879749] systemd[1]: Stopped target Basic System.
vm-test-run-update-hardware-configuration> target # [    3.880937] systemd[1]: Stopped target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    3.882123] systemd[1]: Stopped target Path Units.
vm-test-run-update-hardware-configuration> target # [    3.883265] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.885138] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    3.886525] systemd[1]: Stopped target Slice Units.
vm-test-run-update-hardware-configuration> target # [    3.887601] systemd[1]: Stopped target Socket Units.
vm-test-run-update-hardware-configuration> target # [    3.890049] systemd[1]: Stopped target System Initialization.
vm-test-run-update-hardware-configuration> target # [    3.891187] systemd[1]: Stopped target Swaps.
vm-test-run-update-hardware-configuration> target # [    3.892040] systemd[1]: Stopped target Timer Units.
vm-test-run-update-hardware-configuration> target # [    3.892923] systemd[1]: dbus.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.893959] systemd[1]: Closed D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    3.895279] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.896783] systemd[1]: Stopped Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    3.898072] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    3.900164] systemd[1]: systemd-sysctl.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.901580] systemd[1]: Stopped Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    3.903147] systemd[1]: systemd-modules-load.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.904385] systemd[1]: Stopped Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    3.905416] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.906878] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.909162] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.910406] systemd[1]: Stopped Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    3.911513] systemd[1]: Stopped target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    3.912734] systemd[1]: Stopped target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    3.914194] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.916159] systemd[1]: Stopped Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    3.917223] systemd[1]: Stopping Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    3.920169] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.921411] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    3.929124] systemd[1]: initrd-cleanup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.933334] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.
vm-test-run-update-hardware-configuration> target # [    3.938442] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.939802] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    3.942770] systemd[1]: systemd-udevd.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.945091] systemd[1]: Stopped Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    3.946340] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.947704] systemd[1]: Closed udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    3.949398] systemd[1]: Starting Cleanup udev Database...
vm-test-run-update-hardware-configuration> target # [    3.950426] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.951779] systemd[1]: Stopped Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    3.953239] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.954936] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    3.956204] systemd[1]: kmod-static-nodes.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.958146] systemd[1]: Stopped Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    3.969408] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.971901] systemd[1]: Finished Cleanup udev Database.
vm-test-run-update-hardware-configuration> target # [    3.973740] systemd[1]: Reached target Switch Root.
vm-test-run-update-hardware-configuration> target # [    3.976134] systemd[1]: Starting NixOS Activation...
vm-test-run-update-hardware-configuration> target # [    4.026743] initrd-nixos-activation-start[201]: booting system configuration /nix/store/nzvg05gsj9z9wgzk0912dww5v6ah4pzh-nixos-system-target-test
vm-test-run-update-hardware-configuration> target # [    4.048742] initrd-nixos-activation-start[201]: running activation script...
vm-test-run-update-hardware-configuration> target # [    4.218557] initrd-nixos-activation-start[224]: setting up /etc...
vm-test-run-update-hardware-configuration> target # [    4.308751] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.310759] systemd[1]: Finished NixOS Activation.
vm-test-run-update-hardware-configuration> target # [    4.312934] systemd[1]: Starting Switch Root...
vm-test-run-update-hardware-configuration> target # [    4.325601] systemd[1]: Switching root.
vm-test-run-update-hardware-configuration> target # [    4.643322] systemd-journald[66]: Received SIGTERM from PID 1 (systemd).
vm-test-run-update-hardware-configuration> target: waiting for TCP port 22 on localhost
vm-test-run-update-hardware-configuration> target: waiting for the VM to finish booting
vm-test-run-update-hardware-configuration> target: Guest root shell did not produce any data yet...
vm-test-run-update-hardware-configuration> target:   To debug, enter the VM and run 'systemctl status backdoor.service'.
vm-test-run-update-hardware-configuration> target # [   62.866438] NET: Registered PF_VSOCK protocol family
vm-test-run-update-hardware-configuration> target # [   63.239285] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [   63.244131] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [   63.244947] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [   63.245855] systemd[1]: Detected first boot.
vm-test-run-update-hardware-configuration> target # [   63.247379] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [   63.495147] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [   63.552521] systemd[1]: Applying preset policy.
vm-test-run-update-hardware-configuration> target # [   63.702651] systemd[1]: Populated /etc with preset unit settings.
vm-test-run-update-hardware-configuration> target # [   63.893558] systemd[1]: initrd-switch-root.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   63.895258] systemd[1]: Stopped initrd-switch-root.service.
vm-test-run-update-hardware-configuration> target # [   63.898256] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
vm-test-run-update-hardware-configuration> target # [   63.900632] systemd[1]: Created slice Slice /system/getty.
vm-test-run-update-hardware-configuration> target # [   63.902207] systemd[1]: Created slice User and Session Slice.
vm-test-run-update-hardware-configuration> target # [   63.903373] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [   63.904884] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
vm-test-run-update-hardware-configuration> target # [   63.906259] systemd[1]: Expecting device /dev/hvc0...
vm-test-run-update-hardware-configuration> target # [   63.907237] systemd[1]: Expecting device /dev/ttyS0...
vm-test-run-update-hardware-configuration> target # [   63.908219] systemd[1]: Reached target Local Encrypted Volumes.
vm-test-run-update-hardware-configuration> target # [   63.909283] systemd[1]: Stopped target initrd-fs.target.
vm-test-run-update-hardware-configuration> target # [   63.910278] systemd[1]: Stopped target initrd-root-fs.target.
vm-test-run-update-hardware-configuration> target # [   63.911346] systemd[1]: Stopped target initrd-switch-root.target.
vm-test-run-update-hardware-configuration> target # [   63.912550] systemd[1]: Reached target Virtual Machines and Containers.
vm-test-run-update-hardware-configuration> target # [   63.913780] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [   63.914796] systemd[1]: Reached target Remote File Systems.
vm-test-run-update-hardware-configuration> target # [   63.915930] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [   63.916934] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [   63.919010] systemd[1]: Listening on Query the User Interactively for a Password.
vm-test-run-update-hardware-configuration> target # [   63.921762] systemd[1]: Listening on Process Core Dump Socket.
vm-test-run-update-hardware-configuration> target # [   63.924004] systemd[1]: Listening on Credential Encryption/Decryption.
vm-test-run-update-hardware-configuration> target # [   63.925997] systemd[1]: Listening on Factory Reset Management.
vm-test-run-update-hardware-configuration> target # [   63.927162] systemd[1]: Listening on Hostname Service Socket.
vm-test-run-update-hardware-configuration> target # [   63.930329] systemd[1]: Starting Journal Log Access Socket...
vm-test-run-update-hardware-configuration> target # [   63.931615] systemd[1]: Listening on Journal Audit Socket.
vm-test-run-update-hardware-configuration> target # [   63.934445] systemd[1]: Listening on Console Output Muting Service Socket.
vm-test-run-update-hardware-configuration> target # [   63.935763] systemd[1]: Listening on Network Management Metrics Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   63.937243] systemd[1]: Listening on Network Management Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   63.938503] systemd[1]: Listening on Network Management Netlink Socket.
vm-test-run-update-hardware-configuration> target # [   63.939792] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
vm-test-run-update-hardware-configuration> target # [   63.941128] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [   63.942718] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
vm-test-run-update-hardware-configuration> target # [   63.946696] systemd[1]: Listening on Disk Repartitioning Service Socket.
vm-test-run-update-hardware-configuration> target # [   63.948006] systemd[1]: Listening on Resolve Monitor Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   63.949227] systemd[1]: Listening on Resolve Service Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   63.950532] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [   63.951804] systemd[1]: Listening on udev Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   63.954349] systemd[1]: Mounting Huge Pages File System...
vm-test-run-update-hardware-configuration> target # [   63.958190] systemd[1]: Mounting POSIX Message Queue File System...
vm-test-run-update-hardware-configuration> target # [   63.967155] systemd[1]: Mounting Kernel Debug File System...
vm-test-run-update-hardware-configuration> target # [   63.975171] systemd[1]: Mounting Kernel Trace File System...
vm-test-run-update-hardware-configuration> target # [   63.984399] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [   63.998058] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [   64.005765] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
vm-test-run-update-hardware-configuration> target # [   64.020483] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore
vm-test-run-update-hardware-configuration> target # [   64.027368] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [   64.032383] systemd[1]: Mounting FUSE Control File System...
vm-test-run-update-hardware-configuration> target # [   64.036071] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
vm-test-run-update-hardware-configuration> target # [   64.049957] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [   64.057930] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [   64.068020] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...
vm-test-run-update-hardware-configuration> target # [   64.079203] systemd[1]: Starting Remount Root and Kernel File Systems...
vm-test-run-update-hardware-configuration> target # [   64.084042] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [   64.096542] systemd-journald[294]: Collecting audit messages is enabled.
vm-test-run-update-hardware-configuration> target # [   64.098569] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [   64.111424] systemd[1]: Listening on Journal Log Access Socket.
vm-test-run-update-hardware-configuration> target # [   64.115053] systemd[1]: Mounted Huge Pages File System.
vm-test-run-update-hardware-configuration> target # [   64.118246] systemd[1]: Mounted POSIX Message Queue File System.
vm-test-run-update-hardware-configuration> target # [   64.121620] systemd[1]: Mounted Kernel Debug File System.
vm-test-run-update-hardware-configuration> target # [   64.125370] systemd[1]: Mounted Kernel Trace File System.
vm-test-run-update-hardware-configuration> target # [   64.137101] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [   63.948966] systemd[1]: Queued start job for default target Multi-User System.
vm-test-run-update-hardware-configuration> target # [   63.954564] systemd[1]: Unnecessary job was removed for /dev/vdb.
vm-test-run-update-hardware-configuration> target # [   64.150387] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [   63.957818] systemd[1]: systemd-journald.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   64.155983] loop: module loaded
vm-test-run-update-hardware-configuration> target # [   63.965604] systemd-modules-load[295]: Inserted module 'loop'
vm-test-run-update-hardware-configuration> target # [   63.967872] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   63.972449] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [   63.974338] systemd[1]: Mounted FUSE Control File System.
vm-test-run-update-hardware-configuration> target # [   63.978433] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [   63.985381] systemd-oomd[297]: No swap; memory pressure usage will be degraded
vm-test-run-update-hardware-configuration> target # [   64.180703] EXT4-fs (vdb): re-mounted afbc5179-b21e-4330-b68c-b2bffa36da8b.
vm-test-run-update-hardware-configuration> target # [   63.994115] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.
vm-test-run-update-hardware-configuration> target # [   63.997139] systemd[1]: Finished Remount Root and Kernel File Systems.
vm-test-run-update-hardware-configuration> target # [   64.001178] systemd[1]: Listening on Disk Image Download Service Socket.
vm-test-run-update-hardware-configuration> target # [   64.005276] systemd[1]: Mounting Kernel Configuration File System...
vm-test-run-update-hardware-configuration> target # [   64.015087] systemd[1]: Starting Firewall...
vm-test-run-update-hardware-configuration> target # [   64.023973] systemd[1]: Starting Flush Journal to Persistent Storage...
vm-test-run-update-hardware-configuration> target # [   64.025232] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore
vm-test-run-update-hardware-configuration> target # [   64.035132] systemd[1]: Starting Load/Save OS Random Seed...
vm-test-run-update-hardware-configuration> target # [   64.047164] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [   64.054948] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [   64.056319] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [   64.284501] systemd-journald[294]: Received client request to flush runtime journal.
vm-test-run-update-hardware-configuration> target # [   64.290705] systemd[1]: Finished Load/Save OS Random Seed.
vm-test-run-update-hardware-configuration> target # [   64.296166] systemd[1]: Reached target First Boot Complete.
vm-test-run-update-hardware-configuration> target # [   64.297397] systemd[1]: Mounted Kernel Configuration File System.
vm-test-run-update-hardware-configuration> target # [   64.300424] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [   64.304945] systemd[1]: Starting Network Name Resolution...
vm-test-run-update-hardware-configuration> target # [   64.306170] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [   64.307487] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [   64.310601] systemd[1]: Finished Flush Journal to Persistent Storage.
vm-test-run-update-hardware-configuration> target # [   64.337837] systemd-resolved[324]: Positive Trust Anchors:
vm-test-run-update-hardware-configuration> target # [   64.340290] systemd-resolved[324]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
vm-test-run-update-hardware-configuration> target # [   64.343637] systemd-resolved[324]: . IN DS 38696 8 2 683d2d0acb8c9b712a1948b27f741219298d0a450d612c483af444a4c0fb2b16
vm-test-run-update-hardware-configuration> target # [   64.347119] systemd-resolved[324]: Negative trust anchors: home.arpa 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 170.0.0.192.in-addr.arpa 171.0.0.192.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa ipv4only.arpa resolver.arpa corp home internal intranet lan local private test
vm-test-run-update-hardware-configuration> target # [   64.375589] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [   64.385178] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [   64.386396] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [   64.390071] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [   64.410330] systemd-resolved[324]: Using system hostname 'target'.
vm-test-run-update-hardware-configuration> target # [   64.414828] systemd[1]: Started Network Name Resolution.
vm-test-run-update-hardware-configuration> target # [   64.437259] systemd-udevd[341]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [   64.475353] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [   64.603186] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [   64.673176] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.
vm-test-run-update-hardware-configuration> target # [   64.705441] systemd[1]: Mounting /run/wrappers...
vm-test-run-update-hardware-configuration> target # [   64.733122] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.
vm-test-run-update-hardware-configuration> target # [   64.741974] systemd[1]: Mounted /run/wrappers.
vm-test-run-update-hardware-configuration> target # [   64.743139] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [   64.747924] systemd[1]: Listening on Boot Loader Control Service Socket.
vm-test-run-update-hardware-configuration> target # [   64.751215] systemd[1]: Starting register-nix-paths.service...
vm-test-run-update-hardware-configuration> target # [   64.754288] (udev-worker)[374]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [   64.763143] systemd[1]: Starting Create SUID/SGID Wrappers...
vm-test-run-update-hardware-configuration> target # [   64.764568] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.
vm-test-run-update-hardware-configuration> target # [   64.769301] (udev-worker)[368]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [   64.778177] systemd[1]: Starting Save Transient machine-id to Disk...
vm-test-run-update-hardware-configuration> target # [   64.795969] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [   64.916732] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [   64.929093] systemd[1]: Starting Rebuild Journal Catalog...
vm-test-run-update-hardware-configuration> target # [   64.933574] systemd[1]: Starting Record System Boot/Shutdown in UTMP...
vm-test-run-update-hardware-configuration> target # [   65.049785] systemd[1]: Finished Record System Boot/Shutdown in UTMP.
vm-test-run-update-hardware-configuration> target # [   65.074603] systemd[1]: Finished Rebuild Journal Catalog.
vm-test-run-update-hardware-configuration> target # [   65.082747] systemd[1]: Starting Update is Completed...
vm-test-run-update-hardware-configuration> target # [   65.150940] systemd[1]: Finished Update is Completed.
vm-test-run-update-hardware-configuration> target # [   65.522493] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console
vm-test-run-update-hardware-configuration> target # [   65.332803] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   65.334852] systemd[1]: Finished Create SUID/SGID Wrappers.
vm-test-run-update-hardware-configuration> target # [   65.539400] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
vm-test-run-update-hardware-configuration> target # [   65.359119] systemd[1]: Finished Firewall.
vm-test-run-update-hardware-configuration> target # [   65.359971] systemd[1]: Reached target Preparation for Network.
vm-test-run-update-hardware-configuration> target # [   65.361112] systemd[1]: Listening on Network Management Resolve Hook Socket.
vm-test-run-update-hardware-configuration> target # [   65.367590] systemd[1]: Starting Network Management...
vm-test-run-update-hardware-configuration> target # [   65.604391] mousedev: PS/2 mouse device common for all mice
vm-test-run-update-hardware-configuration> target # [   65.609299] ACPI: button: Power Button [PWRF]
vm-test-run-update-hardware-configuration> target # [   65.486691] systemd-resolved[324]: Clock change detected. Flushing caches.
vm-test-run-update-hardware-configuration> target # [   65.639216] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:07.0/virtio5/input/input4
vm-test-run-update-hardware-configuration> target # [   65.644563] rtc_cmos PNP0B00:00: RTC can wake from S4
vm-test-run-update-hardware-configuration> target # [   65.667983] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
vm-test-run-update-hardware-configuration> target # [   65.677798] rtc_cmos PNP0B00:00: registered as rtc0
vm-test-run-update-hardware-configuration> target # [   65.677928] rtc_cmos PNP0B00:00: setting system clock to 2026-09-19T10:03:36 UTC (1789812216)
vm-test-run-update-hardware-configuration> target # [   65.678015] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
vm-test-run-update-hardware-configuration> target # [   65.678952] Console: switching to colour dummy device 80x25
vm-test-run-update-hardware-configuration> target # [   65.691636] parport_pc 00:02: reported by Plug and Play ACPI
vm-test-run-update-hardware-configuration> target # [   65.691727] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
vm-test-run-update-hardware-configuration> target # [   65.750490] [drm] Found bochs VGA, ID 0xb0c5.
vm-test-run-update-hardware-configuration> target # [   65.750493] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
vm-test-run-update-hardware-configuration> target # [   65.757113] cfg80211: Loading compiled-in X.509 certificates for regulatory database
vm-test-run-update-hardware-configuration> target # [   65.776409] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic
vm-test-run-update-hardware-configuration> target # [   65.777267] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0
vm-test-run-update-hardware-configuration> target # [   65.797049] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
vm-test-run-update-hardware-configuration> target # [   65.797795] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
vm-test-run-update-hardware-configuration> target # [   65.800571] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
vm-test-run-update-hardware-configuration> target # [   65.801751] cfg80211: failed to load regulatory.db
vm-test-run-update-hardware-configuration> target # [   65.639664] systemd-networkd[523]: lo: Link UP
vm-test-run-update-hardware-configuration> target # [   65.640765] systemd-networkd[523]: lo: Gained carrier
vm-test-run-update-hardware-configuration> target # [   65.839673] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
vm-test-run-update-hardware-configuration> target # [   65.840531] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
vm-test-run-update-hardware-configuration> target # [   65.653130] systemd-networkd[523]: eth0: Configuring with /etc/systemd/network/99-ethernet-default-dhcp.network.
vm-test-run-update-hardware-configuration> target # [   65.655143] systemd[1]: Started Network Management.
vm-test-run-update-hardware-configuration> target # [   65.656205] systemd[1]: Reached target Network.
vm-test-run-update-hardware-configuration> target # [   65.662081] systemd-networkd[523]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [   65.664732] systemd-networkd[523]: eth1: Configuring with /etc/systemd/network/40-eth1.network.
vm-test-run-update-hardware-configuration> target # [   65.672297] systemd-networkd[523]: eth0: Link UP
vm-test-run-update-hardware-configuration> target # [   65.673365] systemd-networkd[523]: eth0: Gained carrier
vm-test-run-update-hardware-configuration> target # [   65.674784] systemd[1]: Starting Enable Persistent Storage in systemd-networkd...
vm-test-run-update-hardware-configuration> target # [   65.691191] systemd[1]: Finished register-nix-paths.service.
vm-test-run-update-hardware-configuration> target # [   65.692370] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [   65.700325] systemd[1]: Started Discard unused filesystem blocks once a week.
vm-test-run-update-hardware-configuration> target # [   65.702391] systemd[1]: Started Daily Cleanup of Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   65.705387] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [   65.709784] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   65.711254] systemd[1]: Listening on Nix Daemon Socket.
vm-test-run-update-hardware-configuration> target # [   65.715150] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).
vm-test-run-update-hardware-configuration> target # [   65.718255] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.
vm-test-run-update-hardware-configuration> target # [   65.720108] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [   65.723215] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   65.751217] systemd[1]: Started backdoor.service.
vm-test-run-update-hardware-configuration> target # [   65.753079] systemd[1]: Starting Import lastlog data into lastlog2 database...
vm-test-run-update-hardware-configuration> target # [   65.756080] systemd[1]: Starting Name Service Cache Daemon (nsncd)...
vm-test-run-update-hardware-configuration> target # [   65.764357] systemd[1]: Starting Post-Boot Actions...
vm-test-run-update-hardware-configuration> target # [   65.777465] systemd[1]: Started Reset console on configuration changes.
vm-test-run-update-hardware-configuration> target # [   65.800084] systemd[1]: Starting SSH Host Keys Generation...
vm-test-run-update-hardware-configuration> target # [   65.827891] systemd-networkd[523]: eth1: Link UP
vm-test-run-update-hardware-configuration> target # [   65.841858] systemd-networkd[523]: eth1: Gained carrier
vm-test-run-update-hardware-configuration> target # [   65.843610] systemd-networkd[523]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # connecting to host...
vm-test-run-update-hardware-configuration> target # [   65.856827] systemd-networkd[523]: eth0: DHCPv4 address 10.0.2.15/24, gateway 10.0.2.2 acquired from 10.0.2.2
vm-test-run-update-hardware-configuration> target # [   65.859109] systemd[1]: Starting D-Bus System Message Bus...
vm-test-run-update-hardware-configuration> target # [   65.872910] systemd[1]: Finished Enable Persistent Storage in systemd-networkd.
vm-test-run-update-hardware-configuration> target: Guest shell says: b'Spawning backdoor root shell...\n'
vm-test-run-update-hardware-configuration> target: connected to guest root shell
vm-test-run-update-hardware-configuration> target: (connecting took 56.23 seconds)
vm-test-run-update-hardware-configuration> target: (finished: waiting for the VM to finish booting, in 56.23 seconds)
vm-test-run-update-hardware-configuration> target # [   65.894642] nsncd[537]: Sep 19 10:03:36.910 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"
vm-test-run-update-hardware-configuration> target # [   65.899173] systemd[1]: Started Name Service Cache Daemon (nsncd).
vm-test-run-update-hardware-configuration> target # [   65.909889] systemd[1]: Finished Post-Boot Actions.
vm-test-run-update-hardware-configuration> target # [   65.935692] systemd[1]: Reached target Host and Network Name Lookups.
vm-test-run-update-hardware-configuration> target # [   65.938232] systemd[1]: Reached target User and Group Name Lookups.
vm-test-run-update-hardware-configuration> target # [   65.955139] systemd[1]: Starting User Login Management...
vm-test-run-update-hardware-configuration> target # [   65.963127] systemd[1]: Starting Permit User Sessions...
vm-test-run-update-hardware-configuration> target # [   65.971346] systemd[1]: Finished Import lastlog data into lastlog2 database.
vm-test-run-update-hardware-configuration> target # [   66.026802] dbus-broker-launch[545]: Looking up NSS user entry for 'systemd-timesync'...
vm-test-run-update-hardware-configuration> target # [   66.036915] dbus-broker-launch[545]: NSS returned no entry for 'systemd-timesync'
vm-test-run-update-hardware-configuration> target # [   66.038254] dbus-broker-launch[545]: Invalid user-name in /nix/store/lhszk07v1701bjp6p1z8cbwkzjr5rww8-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"
vm-test-run-update-hardware-configuration> target # [   66.066207] systemd[1]: Finished Permit User Sessions.
vm-test-run-update-hardware-configuration> target # [   66.120323] systemd-logind[570]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)
vm-test-run-update-hardware-configuration> target # [   65.966904] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6
vm-test-run-update-hardware-configuration> target # [   65.969288] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5
vm-test-run-update-hardware-configuration> target # [   66.009621] NET: Registered PF_PACKET protocol family
vm-test-run-update-hardware-configuration> target # [   66.417853] ppdev: user-space parallel port driver
vm-test-run-update-hardware-configuration> target # [   66.424899] iTCO_wdt iTCO_wdt.0.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
vm-test-run-update-hardware-configuration> target # [   66.435924] iTCO_wdt iTCO_wdt.0.auto: initialized. heartbeat=30 sec (nowayout=0)
vm-test-run-update-hardware-configuration> target # [   66.496517] Console: switching to colour frame buffer device 160x50
vm-test-run-update-hardware-configuration> target # [   66.521577] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device
vm-test-run-update-hardware-configuration> target # [   66.139290] dbus-broker-launch[545]: Ready
vm-test-run-update-hardware-configuration> target # [   66.330947] systemd-logind[570]: New seat seat0.
vm-test-run-update-hardware-configuration> target # [   66.333725] systemd[1]: Started Getty on tty1.
vm-test-run-update-hardware-configuration> target # [   66.336651] systemd-logind[570]: Watching system buttons on /dev/input/event2 (Power Button)
vm-test-run-update-hardware-configuration> target # [   66.340396] systemd[1]: Reached target Login Prompts.
vm-test-run-update-hardware-configuration> target # [   66.343997] systemd[1]: Started D-Bus System Message Bus.
vm-test-run-update-hardware-configuration> target # [   66.345501] systemd-logind[570]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)
vm-test-run-update-hardware-configuration> target # [   66.349116] systemd[1]: Started User Login Management.
vm-test-run-update-hardware-configuration> target # [   66.375208] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
vm-test-run-update-hardware-configuration> target # [   66.377975] systemd[1]: Starting linger-users.service...
vm-test-run-update-hardware-configuration> target # [   66.384840] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   66.457585] sshd-keygen-start[577]: Generating public/private rsa key pair.
vm-test-run-update-hardware-configuration> target # [   66.458827] sshd-keygen-start[577]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key
vm-test-run-update-hardware-configuration> target # [   66.460276] sshd-keygen-start[577]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
vm-test-run-update-hardware-configuration> target # [   66.461739] sshd-keygen-start[577]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [   66.462670] sshd-keygen-start[577]: SHA256:pS8lTS2Ue0jA0zcPSZM1h/if9+Y6KJflfYJin6KD0zo root@target
vm-test-run-update-hardware-configuration> target # [   66.464077] sshd-keygen-start[577]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [   66.466559] sshd-keygen-start[577]: +---[RSA 4096]----+
vm-test-run-update-hardware-configuration> target # [   66.467445] sshd-keygen-start[577]: |       ..o.oo=o..|
vm-test-run-update-hardware-configuration> target # [   66.469445] sshd-keygen-start[577]: |        o.+.B..o |
vm-test-run-update-hardware-configuration> target # [   66.470347] sshd-keygen-start[577]: |         o++.=   |
vm-test-run-update-hardware-configuration> target # [   66.471230] sshd-keygen-start[577]: |         =o.. o  |
vm-test-run-update-hardware-configuration> target # [   66.472098] sshd-keygen-start[577]: |        S o.   ..|
vm-test-run-update-hardware-configuration> target # [   66.472955] sshd-keygen-start[577]: |         +    ..o|
vm-test-run-update-hardware-configuration> target # [   66.474729] sshd-keygen-start[577]: |       o. .  * .o|
vm-test-run-update-hardware-configuration> target # [   66.477183] sshd-keygen-start[577]: |      E o.= =.+ =|
vm-test-run-update-hardware-configuration> target # [   66.478065] sshd-keygen-start[577]: |      .+.+ *o .*o|
vm-test-run-update-hardware-configuration> target # [   66.478936] sshd-keygen-start[577]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   66.479866] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   66.482210] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   66.497327] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   66.498321] systemd[1]: linger-users.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   66.500094] systemd[1]: Finished linger-users.service.
vm-test-run-update-hardware-configuration> target # [   66.725110] kvm_amd: TSC scaling supported
vm-test-run-update-hardware-configuration> target # [   66.725642] kvm_amd: Nested Virtualization enabled
vm-test-run-update-hardware-configuration> target # [   66.727090] kvm_amd: Nested Paging enabled
vm-test-run-update-hardware-configuration> target # [   66.727573] kvm_amd: LBR virtualization supported
vm-test-run-update-hardware-configuration> target # [   66.728515] kvm_amd: Virtual GIF supported
vm-test-run-update-hardware-configuration> target # [   66.729267] kvm_amd: Virtual NMI enabled
vm-test-run-update-hardware-configuration> target # [   66.551709] sshd-keygen-start[601]: Generating public/private ed25519 key pair.
vm-test-run-update-hardware-configuration> target # [   66.552986] sshd-keygen-start[601]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
vm-test-run-update-hardware-configuration> target # [   66.554477] sshd-keygen-start[601]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
vm-test-run-update-hardware-configuration> target # [   66.555925] sshd-keygen-start[601]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [   66.556861] sshd-keygen-start[601]: SHA256:piJlEW+sATB/cfO81gntcq051KSeq4MjmFe2kVFy0Ls root@target
vm-test-run-update-hardware-configuration> target # [   66.558761] sshd-keygen-start[601]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [   66.560195] sshd-keygen-start[601]: +--[ED25519 256]--+
vm-test-run-update-hardware-configuration> target # [   66.562422] sshd-keygen-start[601]: |o.. o +o         |
vm-test-run-update-hardware-configuration> target # [   66.563304] sshd-keygen-start[601]: | o . *.++.       |
vm-test-run-update-hardware-configuration> target # [   66.564333] sshd-keygen-start[601]: |  . + +++.. .    |
vm-test-run-update-hardware-configuration> target # [   66.566091] sshd-keygen-start[601]: |   . =. .= *     |
vm-test-run-update-hardware-configuration> target # [   66.566973] sshd-keygen-start[601]: |    +  oS.B o    |
vm-test-run-update-hardware-configuration> target # [   66.568550] sshd-keygen-start[601]: |   o  =+E= +     |
vm-test-run-update-hardware-configuration> target # [   66.570105] sshd-keygen-start[601]: |  .o.o.+  *      |
vm-test-run-update-hardware-configuration> target # [   66.570993] sshd-keygen-start[601]: |  o.o.+ .  o     |
vm-test-run-update-hardware-configuration> target # [   66.572410] sshd-keygen-start[601]: |   . . ..o.      |
vm-test-run-update-hardware-configuration> target # [   66.574377] sshd-keygen-start[601]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   66.575415] systemd[1]: sshd-keygen.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   66.579517] systemd[1]: Finished SSH Host Keys Generation.
vm-test-run-update-hardware-configuration> target # [   66.582732] systemd[1]: Starting SSH Daemon...
vm-test-run-update-hardware-configuration> target # [   66.790572] EDAC MC: Ver: 3.0.0
vm-test-run-update-hardware-configuration> target # [   66.607958] sshd[604]: Server listening on 0.0.0.0 port 22.
vm-test-run-update-hardware-configuration> target # [   66.609189] sshd[604]: Server listening on :: port 22.
vm-test-run-update-hardware-configuration> target # [   66.610552] systemd[1]: Started SSH Daemon.
vm-test-run-update-hardware-configuration> target # [   66.612361] systemd[1]: Reached target Multi-User System.
vm-test-run-update-hardware-configuration> target # [   66.675934] systemd-vconsole-setup[595]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [   66.680085] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # Connection to localhost (::1) 22 port [tcp/ssh] succeeded!
vm-test-run-update-hardware-configuration> target: (finished: waiting for TCP port 22 on localhost, in 57.39 seconds)
vm-test-run-update-hardware-configuration> Setting up port forwarding from host port 44385 to guest port 22
vm-test-run-update-hardware-configuration> target # [   67.058121] sshd-session[611]: Connection closed by ::1 port 57406 [preauth]
vm-test-run-update-hardware-configuration> target # [   67.326327] systemd-networkd[523]: eth0: Gained IPv6LL
vm-test-run-update-hardware-configuration> target # [   67.441951] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   67.445302] systemd[1]: Finished Save Transient machine-id to Disk.
vm-test-run-update-hardware-configuration> target # [   67.447314] systemd[1]: Startup finished in 1.013s (kernel) + 1min 1.643s (initrd) + 4.789s (userspace) = 1min 7.447s.
vm-test-run-update-hardware-configuration> target # [   67.581989] systemd-networkd[523]: eth1: Gained IPv6LL
vm-test-run-update-hardware-configuration> Host port 44385 is now listening
vm-test-run-update-hardware-configuration> target # [   69.060810] sshd-session[615]: Connection closed by 10.0.2.2 port 59702 [preauth]
vm-test-run-update-hardware-configuration> target # [   85.404416] sshd-session[622]: Accepted publickey for nonrootuser from 10.0.2.2 port 35110 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   85.412699] sshd-session[622]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   85.430379] systemd-logind[570]: New session '1' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   85.435861] systemd[1]: Created slice Slice /user/1000.
vm-test-run-update-hardware-configuration> target # [   85.439280] systemd[1]: Starting User Runtime Directory /run/user/1000...
vm-test-run-update-hardware-configuration> target # [   85.460680] systemd[1]: Finished User Runtime Directory /run/user/1000.
vm-test-run-update-hardware-configuration> target # [   85.464585] systemd[1]: Starting User Manager for UID 1000...
vm-test-run-update-hardware-configuration> target # [   85.482304] (systemd)[628]: pam_unix(systemd-user:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   85.487835] systemd-logind[570]: New session '2' of user 'nonrootuser' with class 'manager' and type 'unspecified'.
vm-test-run-update-hardware-configuration> target # [   85.502798] systemd[628]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   85.586035] systemd[628]: Queued start job for default target Main User Target.
vm-test-run-update-hardware-configuration> target # [   85.588724] systemd[628]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   85.593061] systemd[628]: Created slice User Application Slice.
vm-test-run-update-hardware-configuration> target # [   85.594210] systemd[628]: Started Daily Cleanup of User's Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   85.595507] systemd[628]: Reached target Paths.
vm-test-run-update-hardware-configuration> target # [   85.596514] systemd[628]: Reached target Timers.
vm-test-run-update-hardware-configuration> target # [   85.599076] systemd[628]: Starting D-Bus User Message Bus Socket...
vm-test-run-update-hardware-configuration> target # [   85.601077] systemd[628]: Starting Create User Files and Directories...
vm-test-run-update-hardware-configuration> target # [   85.622396] systemd[628]: Finished Create User Files and Directories.
vm-test-run-update-hardware-configuration> target # [   85.632732] systemd[628]: Listening on D-Bus User Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   85.633921] systemd[628]: Reached target Sockets.
vm-test-run-update-hardware-configuration> target # [   85.634828] systemd[628]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   85.635790] systemd[1]: Started User Manager for UID 1000.
vm-test-run-update-hardware-configuration> target # [   85.639922] systemd[628]: Starting Run user-specific NixOS activation...
vm-test-run-update-hardware-configuration> target # [   85.642081] systemd[1]: Started Session 1 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   85.669185] systemd[628]: Finished Run user-specific NixOS activation.
vm-test-run-update-hardware-configuration> target # [   85.670745] systemd[628]: Reached target Main User Target.
vm-test-run-update-hardware-configuration> target # [   85.672467] systemd[628]: Startup finished in 172ms.
vm-test-run-update-hardware-configuration> target # [   85.711675] sudo[649]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-facter
vm-test-run-update-hardware-configuration> target # [   85.718254] sudo[649]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   85.995185] sr 2:0:0:0: Attached scsi generic sg0 type 5
vm-test-run-update-hardware-configuration> target # [   85.911360] sudo[649]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   85.920986] sshd-session[640]: Received disconnect from 10.0.2.2 port 35110:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   85.922680] sshd-session[640]: Disconnected from user nonrootuser 10.0.2.2 port 35110
vm-test-run-update-hardware-configuration> target # [   85.924410] sshd-session[622]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   85.931070] systemd-logind[570]: Session 1 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> target # [   96.361343] sshd-session[679]: Accepted publickey for nonrootuser from 10.0.2.2 port 38130 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   96.368811] sshd-session[679]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   96.375193] systemd-logind[570]: New session '3' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   96.378329] systemd[1]: Started Session 3 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   96.428925] sudo[689]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-generate-config --no-filesystems --show-hardware-config
vm-test-run-update-hardware-configuration> target # [   96.436226] sudo[689]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   96.576555] sudo[689]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   96.584962] sshd-session[682]: Received disconnect from 10.0.2.2 port 38130:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   96.586555] sshd-session[682]: Disconnected from user nonrootuser 10.0.2.2 port 38130
vm-test-run-update-hardware-configuration> target # [   96.588164] sshd-session[679]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   96.592787] systemd-logind[570]: Session 3 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> (finished: run the VM test script, in 98.69 seconds)
vm-test-run-update-hardware-configuration> test script finished in 99.60s
vm-test-run-update-hardware-configuration> cleanup
vm-test-run-update-hardware-configuration> kill QemuMachine (pid 45)
vm-test-run-update-hardware-configuration> target # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/d64q19q1xjdwfhqx6czvrjgrhq0n3lcc-python3-3.14.7/bin/python3.14)
vm-test-run-update-hardware-configuration> target # [2026-09-19T10:04:09Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-09-19T10:04:09Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-09-19T10:04:09Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> (finished: cleanup, in 0.12 seconds)

post-build step Upload to niks3: ok
time=2026-09-19T10:04:14.079Z level=INFO msg="Uploading 0 paths to niks3.clan.lol (1 already cached)"
time=2026-09-19T10:04:14.671Z level=INFO msg="Uploading 1 narinfos"
time=2026-09-19T10:04:14.865Z level=INFO msg="Upload complete. (886ms)"