these 6 derivations will be built:
  /nix/store/3g9z3qcx6419p1mbzgr7j2car01qwxsd-installation-test-flake-x86_64-linux.drv
  /nix/store/4y8v5g4f0xjlkyjslz1r0rxvgz9vw5rx-closure-info.drv
  /nix/store/3x2nszszvqjgqss9f3h612xjazmw6cc5-test-script.drv
  /nix/store/2h7wlmxcd6l2pqwk87s7yvi7lzlwbz5k-driverConfiguration.json.drv
  /nix/store/5cfl0h9zp1j6r8fqyxrvxycrjhxyzvab-nixos-test-driver-update-hardware-configuration.drv
  /nix/store/8p95x3qsf9b3z18kjpbx8yflb1yjs4b1-vm-test-run-update-hardware-configuration.drv
building '/nix/store/3x2nszszvqjgqss9f3h612xjazmw6cc5-test-script.drv'
test-script> structuredAttrs is enabled
building '/nix/store/2h7wlmxcd6l2pqwk87s7yvi7lzlwbz5k-driverConfiguration.json.drv'
driverConfiguration.json> structuredAttrs is enabled
building '/nix/store/5cfl0h9zp1j6r8fqyxrvxycrjhxyzvab-nixos-test-driver-update-hardware-configuration.drv'
nixos-test-driver-update-hardware-configuration> Running type check (enable/disable: config.skipTypeCheck)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck
nixos-test-driver-update-hardware-configuration> All checks passed!
nixos-test-driver-update-hardware-configuration> Linting test script (enable/disable: config.skipLint)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint
nixos-test-driver-update-hardware-configuration> All checks passed!
building '/nix/store/8p95x3qsf9b3z18kjpbx8yflb1yjs4b1-vm-test-run-update-hardware-configuration.drv' on 'ssh-ng://builder@build-x86-01.clan.lol'
building '/nix/store/8p95x3qsf9b3z18kjpbx8yflb1yjs4b1-vm-test-run-update-hardware-configuration.drv'
vm-test-run-update-hardware-configuration> Machine state will be reset. To keep it, pass --keep-machine-state
vm-test-run-update-hardware-configuration> start all VLans
vm-test-run-update-hardware-configuration> (finished: start all VLans, in 0.00 seconds)
vm-test-run-update-hardware-configuration> Test will time out and terminate in 3600.0 seconds
vm-test-run-update-hardware-configuration> run the VM test script
vm-test-run-update-hardware-configuration> additionally exposed symbols:
vm-test-run-update-hardware-configuration>     target,
vm-test-run-update-hardware-configuration>     vlan1,
vm-test-run-update-hardware-configuration>     start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh
vm-test-run-update-hardware-configuration> target: starting vm
vm-test-run-update-hardware-configuration> target # Disk image does not exist, creating the virtualisation disk image...
vm-test-run-update-hardware-configuration> target # Formatting '/build/vm-state-target/tmp.Unh4ViPekX', fmt=raw size=8589934592
vm-test-run-update-hardware-configuration> target # mke2fs 1.47.4 (6-Mar-2025)
vm-test-run-update-hardware-configuration> target # Discarding device blocks:       0/2097152               done
vm-test-run-update-hardware-configuration> target # Creating filesystem with 2097152 4k blocks and 524288 inodes
vm-test-run-update-hardware-configuration> target # Filesystem UUID: 69568991-96d7-403b-856b-532538e38fff
vm-test-run-update-hardware-configuration> target # Superblock backups stored on blocks:
vm-test-run-update-hardware-configuration> target: QEMU running (pid 45)
vm-test-run-update-hardware-configuration> target # 	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Allocating group tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Writing inode tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Creating journal (16384 blocks): done
vm-test-run-update-hardware-configuration> target # Writing superblocks and filesystem accounting information:  0/64     done
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Virtualisation disk image created.
vm-test-run-update-hardware-configuration> target # Formatting 'empty0.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=536870912 lazy_refcounts=off refcount_bits=16
vm-test-run-update-hardware-configuration> target # Starting virtiofs daemons...
vm-test-run-update-hardware-configuration> target # [2026-09-20T15:02:31Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-09-20T15:02:31Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-09-20T15:02:31Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-09-20T15:02:31Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-09-20T15:02:31Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-09-20T15:02:31Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-09-20T15:02:31Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-09-20T15:02:31Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-09-20T15:02:31Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-09-20T15:02:31Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-09-20T15:02:31Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-09-20T15:02:31Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC550+7EF2C550 CA00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:02.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:06.0 CB00 PCI2.10 PnP PMM 7EFCC550 7EF2C550 CB00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:06.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Booting from ROM...
vm-test-run-update-hardware-configuration> target # Probing EDD (edd=off to disable)... o[    0.000000] Linux version 6.18.52 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Mon Sep 14 11:36:19 UTC 2026
vm-test-run-update-hardware-configuration> target # [    0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/nzvg05gsj9z9wgzk0912dww5v6ah4pzh-nixos-system-target-test/init regInfo=/nix/store/0jhf0vwrn0aw3glaf6rdk83y4ngvlcws-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-provided physical RAM map:
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd4fff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000007ffd5000-0x000000007fffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013e7fffff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] NX (Execute Disable) protection: active
vm-test-run-update-hardware-configuration> target # [    0.000000] APIC: Static calls initialized
vm-test-run-update-hardware-configuration> target # [    0.000000] SMBIOS 2.8 present.
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: Memory slots populated: 1/1
vm-test-run-update-hardware-configuration> target # [    0.000000] Hypervisor detected: KVM
vm-test-run-update-hardware-configuration> target # [    0.000000] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: using sched offset of 524237830 cycles
vm-test-run-update-hardware-configuration> target # [    0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
vm-test-run-update-hardware-configuration> target # [    0.000005] tsc: Detected 4192.120 MHz processor
vm-test-run-update-hardware-configuration> target # [    0.000611] last_pfn = 0x13e800 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000641] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
vm-test-run-update-hardware-configuration> target # [    0.000644] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
vm-test-run-update-hardware-configuration> target # [    0.000685] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.002350] found SMP MP-table at [mem 0x000f5450-0x000f545f]
vm-test-run-update-hardware-configuration> target # [    0.002364] Using GB pages for direct mapping
vm-test-run-update-hardware-configuration> target # [    0.002462] RAMDISK: [mem 0x7e36e000-0x7ffcffff]
vm-test-run-update-hardware-configuration> target # [    0.002468] ACPI: Early table checksum verification disabled
vm-test-run-update-hardware-configuration> target # [    0.002472] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS )
vm-test-run-update-hardware-configuration> target # [    0.002475] ACPI: RSDT 0x000000007FFE2433 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002479] ACPI: FACP 0x000000007FFE222B 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002485] ACPI: DSDT 0x000000007FFE0040 0021EB (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002487] ACPI: FACS 0x000000007FFE0000 000040
vm-test-run-update-hardware-configuration> target # [    0.002489] ACPI: APIC 0x000000007FFE231F 000078 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002490] ACPI: HPET 0x000000007FFE2397 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002491] ACPI: MCFG 0x000000007FFE23CF 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002493] ACPI: WAET 0x000000007FFE240B 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002494] ACPI: Reserving FACP table memory at [mem 0x7ffe222b-0x7ffe231e]
vm-test-run-update-hardware-configuration> target # [    0.002495] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe222a]
vm-test-run-update-hardware-configuration> target # [    0.002495] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
vm-test-run-update-hardware-configuration> target # [    0.002496] ACPI: Reserving APIC table memory at [mem 0x7ffe231f-0x7ffe2396]
vm-test-run-update-hardware-configuration> target # [    0.002496] ACPI: Reserving HPET table memory at [mem 0x7ffe2397-0x7ffe23ce]
vm-test-run-update-hardware-configuration> target # [    0.002496] ACPI: Reserving MCFG table memory at [mem 0x7ffe23cf-0x7ffe240a]
vm-test-run-update-hardware-configuration> target # [    0.002497] ACPI: Reserving WAET table memory at [mem 0x7ffe240b-0x7ffe2432]
vm-test-run-update-hardware-configuration> target # [    0.002861] No NUMA configuration found
vm-test-run-update-hardware-configuration> target # [    0.002862] Faking a node at [mem 0x0000000000000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002865] NODE_DATA(0) allocated [mem 0x13e7f8780-0x13e7fdcff]
vm-test-run-update-hardware-configuration> target # [    0.002943] Zone ranges:
vm-test-run-update-hardware-configuration> target # [    0.002944]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
vm-test-run-update-hardware-configuration> target # [    0.002945]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
vm-test-run-update-hardware-configuration> target # [    0.002946]   Normal   [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002947]   Device   empty
vm-test-run-update-hardware-configuration> target # [    0.002948] Movable zone start for each node
vm-test-run-update-hardware-configuration> target # [    0.002948] Early memory node ranges
vm-test-run-update-hardware-configuration> target # [    0.002949]   node   0: [mem 0x0000000000001000-0x000000000009efff]
vm-test-run-update-hardware-configuration> target # [    0.002950]   node   0: [mem 0x0000000000100000-0x000000007ffd4fff]
vm-test-run-update-hardware-configuration> target # [    0.002950]   node   0: [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002951] Initmem setup node 0 [mem 0x0000000000001000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002968] On node 0, zone DMA: 1 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.003174] On node 0, zone DMA: 97 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.044476] On node 0, zone Normal: 43 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.044859] On node 0, zone Normal: 6144 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.045755] ACPI: PM-Timer IO Port: 0x608
vm-test-run-update-hardware-configuration> target # [    0.045772] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
vm-test-run-update-hardware-configuration> target # [    0.045807] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
vm-test-run-update-hardware-configuration> target # [    0.045810] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
vm-test-run-update-hardware-configuration> target # [    0.045812] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
vm-test-run-update-hardware-configuration> target # [    0.045812] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
vm-test-run-update-hardware-configuration> target # [    0.045813] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
vm-test-run-update-hardware-configuration> target # [    0.045814] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
vm-test-run-update-hardware-configuration> target # [    0.045818] ACPI: Using ACPI (MADT) for SMP configuration information
vm-test-run-update-hardware-configuration> target # [    0.045819] ACPI: HPET id: 0x8086a201 base: 0xfed00000
vm-test-run-update-hardware-configuration> target # [    0.045827] TSC deadline timer available
vm-test-run-update-hardware-configuration> target # [    0.045841] CPU topo: Max. logical packages:   1
vm-test-run-update-hardware-configuration> target # [    0.045842] CPU topo: Max. logical dies:       1
vm-test-run-update-hardware-configuration> target # [    0.045842] CPU topo: Max. dies per package:   1
vm-test-run-update-hardware-configuration> target # [    0.045855] CPU topo: Max. threads per core:   1
vm-test-run-update-hardware-configuration> target # [    0.045856] CPU topo: Num. cores per package:     1
vm-test-run-update-hardware-configuration> target # [    0.045856] CPU topo: Num. threads per package:   1
vm-test-run-update-hardware-configuration> target # [    0.045857] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs
vm-test-run-update-hardware-configuration> target # [    0.045879] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
vm-test-run-update-hardware-configuration> target # [    0.045909] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
vm-test-run-update-hardware-configuration> target # [    0.045910] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
vm-test-run-update-hardware-configuration> target # [    0.045911] PM: hibernation: Registered nosave memory: [mem 0x7ffd5000-0xffffffff]
vm-test-run-update-hardware-configuration> target # [    0.045913] [mem 0xc0000000-0xfed1bfff] available for PCI devices
vm-test-run-update-hardware-configuration> target # [    0.045914] Booting paravirtualized kernel on KVM
vm-test-run-update-hardware-configuration> target # [    0.045919] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
vm-test-run-update-hardware-configuration> target # [    0.049439] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
vm-test-run-update-hardware-configuration> target # [    0.051600] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152
vm-test-run-update-hardware-configuration> target # [    0.051645] kvm-guest: PV spinlocks disabled, single CPU
vm-test-run-update-hardware-configuration> target # [    0.051647] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/nzvg05gsj9z9wgzk0912dww5v6ah4pzh-nixos-system-target-test/init regInfo=/nix/store/0jhf0vwrn0aw3glaf6rdk83y4ngvlcws-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.051732] Unknown kernel command line parameters "regInfo=/nix/store/0jhf0vwrn0aw3glaf6rdk83y4ngvlcws-closure-info/registration", will be passed to user space.
vm-test-run-update-hardware-configuration> target # [    0.051932] random: crng init done
vm-test-run-update-hardware-configuration> target # [    0.051932] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
vm-test-run-update-hardware-configuration> target # [    0.056034] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.058221] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.058278] software IO TLB: area num 1.
vm-test-run-update-hardware-configuration> target # [    0.136444] Fallback order for Node 0: 0
vm-test-run-update-hardware-configuration> target # [    0.136455] Built 1 zonelists, mobility grouping on.  Total pages: 780147
vm-test-run-update-hardware-configuration> target # [    0.136457] Policy zone: Normal
vm-test-run-update-hardware-configuration> target # [    0.139100] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
vm-test-run-update-hardware-configuration> target # [    0.145518] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
vm-test-run-update-hardware-configuration> target # [    0.153616] allocated 6291456 bytes of page_ext
vm-test-run-update-hardware-configuration> target # [    0.164308] ftrace: allocating 48787 entries in 192 pages
vm-test-run-update-hardware-configuration> target # [    0.164312] ftrace: allocated 192 pages with 2 groups
vm-test-run-update-hardware-configuration> target # [    0.166477] Dynamic Preempt: lazy
vm-test-run-update-hardware-configuration> target # [    0.166617] rcu: Preemptible hierarchical RCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.166618] rcu: 	RCU event tracing is enabled.
vm-test-run-update-hardware-configuration> target # [    0.166619] rcu: 	RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.166621] 	Trampoline variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.166622] 	Rude variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.166622] 	Tracing variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.166623] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
vm-test-run-update-hardware-configuration> target # [    0.166623] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
vm-test-run-update-hardware-configuration> target # [    0.166683] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.166685] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.166686] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.171540] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16
vm-test-run-update-hardware-configuration> target # [    0.171862] rcu: srcu_init: Setting srcu_struct sizes based on contention.
vm-test-run-update-hardware-configuration> target # [    0.171870] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
vm-test-run-update-hardware-configuration> target # [    0.172063] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
vm-test-run-update-hardware-configuration> target # [    0.178251] Console: colour VGA+ 80x25
vm-test-run-update-hardware-configuration> target # [    0.178256] printk: legacy console [tty0] enabled
vm-test-run-update-hardware-configuration> target # [    0.217098] printk: legacy console [ttyS0] enabled
vm-test-run-update-hardware-configuration> target # [    0.384265] ACPI: Core revision 20250807
vm-test-run-update-hardware-configuration> target # [    0.385543] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
vm-test-run-update-hardware-configuration> target # [    0.387707] APIC: Switch to symmetric I/O mode setup
vm-test-run-update-hardware-configuration> target # [    0.389006] x2apic enabled
vm-test-run-update-hardware-configuration> target # [    0.390158] APIC: Switched APIC routing to: physical x2apic
vm-test-run-update-hardware-configuration> target # [    0.392576] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
vm-test-run-update-hardware-configuration> target # [    0.394357] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d4d0b6d3, max_idle_ns: 440795255641 ns
vm-test-run-update-hardware-configuration> target # [    0.396709] Calibrating delay loop (skipped) preset value.. 8384.24 BogoMIPS (lpj=4192120)
vm-test-run-update-hardware-configuration> target # [    0.398701] x86/cpu: User Mode Instruction Prevention (UMIP) activated
vm-test-run-update-hardware-configuration> target # [    0.399920] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
vm-test-run-update-hardware-configuration> target # [    0.401704] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
vm-test-run-update-hardware-configuration> target # [    0.402712] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
vm-test-run-update-hardware-configuration> target # [    0.404704] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
vm-test-run-update-hardware-configuration> target # [    0.405705] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
vm-test-run-update-hardware-configuration> target # [    0.406704] Speculative Return Stack Overflow: Mitigation: Safe RET
vm-test-run-update-hardware-configuration> target # [    0.407704] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
vm-test-run-update-hardware-configuration> target # [    0.408716] Spectre V2 : Enabling IBPB for BPF
vm-test-run-update-hardware-configuration> target # [    0.409705] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
vm-test-run-update-hardware-configuration> target # [    0.410705] active return thunk: srso_alias_return_thunk
vm-test-run-update-hardware-configuration> target # [    0.411739] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
vm-test-run-update-hardware-configuration> target # [    0.412704] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
vm-test-run-update-hardware-configuration> target # [    0.413703] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
vm-test-run-update-hardware-configuration> target # [    0.414701] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
vm-test-run-update-hardware-configuration> target # [    0.414704] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
vm-test-run-update-hardware-configuration> target # [    0.415701] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
vm-test-run-update-hardware-configuration> target # [    0.415704] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
vm-test-run-update-hardware-configuration> target # [    0.417704] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
vm-test-run-update-hardware-configuration> target # [    0.418703] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
vm-test-run-update-hardware-configuration> target # [    0.419704] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
vm-test-run-update-hardware-configuration> target # [    0.420703] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
vm-test-run-update-hardware-configuration> target # [    0.421703] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
vm-test-run-update-hardware-configuration> target # [    0.423704] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
vm-test-run-update-hardware-configuration> target # [    0.424704] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
vm-test-run-update-hardware-configuration> target # [    0.426703] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16
vm-test-run-update-hardware-configuration> target # [    0.427703] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]:   24
vm-test-run-update-hardware-configuration> target # [    0.428703] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.
vm-test-run-update-hardware-configuration> target # [    0.462885] Freeing SMP alternatives memory: 44K
vm-test-run-update-hardware-configuration> target # [    0.463710] pid_max: default: 32768 minimum: 301
vm-test-run-update-hardware-configuration> target # [    0.465137] LSM: initializing lsm=capability,landlock,yama,bpf,ima
vm-test-run-update-hardware-configuration> target # [    0.466809] landlock: Up and running.
vm-test-run-update-hardware-configuration> target # [    0.467704] Yama: becoming mindful.
vm-test-run-update-hardware-configuration> target # [    0.468980] LSM support for eBPF active
vm-test-run-update-hardware-configuration> target # [    0.470025] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.471784] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.474307] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2)
vm-test-run-update-hardware-configuration> target # [    0.475324] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
vm-test-run-update-hardware-configuration> target # [    0.475708] ... version:                   2
vm-test-run-update-hardware-configuration> target # [    0.476705] ... bit width:                 48
vm-test-run-update-hardware-configuration> target # [    0.477717] ... generic counters:          6
vm-test-run-update-hardware-configuration> target # [    0.478705] ... generic bitmap:            000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.479705] ... fixed-purpose counters:    0
vm-test-run-update-hardware-configuration> target # [    0.480705] ... fixed-purpose bitmap:      0000000000000000
vm-test-run-update-hardware-configuration> target # [    0.481705] ... value mask:                0000ffffffffffff
vm-test-run-update-hardware-configuration> target # [    0.482705] ... max period:                00007fffffffffff
vm-test-run-update-hardware-configuration> target # [    0.483704] ... global_ctrl mask:          000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.484836] signal: max sigframe size: 3376
vm-test-run-update-hardware-configuration> target # [    0.485906] rcu: Hierarchical SRCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.486709] rcu: 	Max phase no-delay instances is 400.
vm-test-run-update-hardware-configuration> target # [    0.491503] smp: Bringing up secondary CPUs ...
vm-test-run-update-hardware-configuration> target # [    0.492549] smp: Brought up 1 node, 1 CPU
vm-test-run-update-hardware-configuration> target # [    0.493457] smpboot: Total of 1 processors activated (8384.24 BogoMIPS)
vm-test-run-update-hardware-configuration> target # [    0.494891] Memory: 2906936K/3120588K available (17247K kernel code, 2727K rwdata, 13616K rodata, 3652K init, 2976K bss, 201260K reserved, 0K cma-reserved)
vm-test-run-update-hardware-configuration> target # [    0.496057] devtmpfs: initialized
vm-test-run-update-hardware-configuration> target # [    0.496887] x86/mm: Memory block size: 128MB
vm-test-run-update-hardware-configuration> target # [    0.499025] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.499733] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).
vm-test-run-update-hardware-configuration> target # [    0.500813] pinctrl core: initialized pinctrl subsystem
vm-test-run-update-hardware-configuration> target # [    0.501990] PM: RTC time: 15:02:32, date: 2026-09-20
vm-test-run-update-hardware-configuration> target # [    0.505642] NET: Registered PF_NETLINK/PF_ROUTE protocol family
vm-test-run-update-hardware-configuration> target # [    0.507515] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.508764] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.510172] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.510716] audit: initializing netlink subsys (disabled)
vm-test-run-update-hardware-configuration> target # [    0.512115] thermal_sys: Registered thermal governor 'fair_share'
vm-test-run-update-hardware-configuration> target # [    0.512117] thermal_sys: Registered thermal governor 'bang_bang'
vm-test-run-update-hardware-configuration> target # [    0.512708] audit: type=2000 audit(1789916552.592:1): state=initialized audit_enabled=0 res=1
vm-test-run-update-hardware-configuration> target # [    0.514708] thermal_sys: Registered thermal governor 'step_wise'
vm-test-run-update-hardware-configuration> target # [    0.514710] thermal_sys: Registered thermal governor 'user_space'
vm-test-run-update-hardware-configuration> target # [    0.515705] thermal_sys: Registered thermal governor 'power_allocator'
vm-test-run-update-hardware-configuration> target # [    0.516736] cpuidle: using governor menu
vm-test-run-update-hardware-configuration> target # [    0.519541] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vm-test-run-update-hardware-configuration> target # [    0.520959] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.521709] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
vm-test-run-update-hardware-configuration> target # [    0.522717] PCI: Using configuration type 1 for base access
vm-test-run-update-hardware-configuration> target # [    0.524282] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
vm-test-run-update-hardware-configuration> target # [    0.531010] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.531705] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
vm-test-run-update-hardware-configuration> target # [    0.536705] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.537707] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
vm-test-run-update-hardware-configuration> target # [    0.546128] ACPI: Added _OSI(Module Device)
vm-test-run-update-hardware-configuration> target # [    0.546706] ACPI: Added _OSI(Processor Device)
vm-test-run-update-hardware-configuration> target # [    0.549705] ACPI: Added _OSI(Processor Aggregator Device)
vm-test-run-update-hardware-configuration> target # [    0.555376] ACPI: 1 ACPI AML tables successfully acquired and loaded
vm-test-run-update-hardware-configuration> target # [    0.558936] ACPI: Interpreter enabled
vm-test-run-update-hardware-configuration> target # [    0.559727] ACPI: PM: (supports S0 S3 S4 S5)
vm-test-run-update-hardware-configuration> target # [    0.562707] ACPI: Using IOAPIC for interrupt routing
vm-test-run-update-hardware-configuration> target # [    0.563782] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
vm-test-run-update-hardware-configuration> target # [    0.566706] PCI: Using E820 reservations for host bridge windows
vm-test-run-update-hardware-configuration> target # [    0.567918] ACPI: Enabled 2 GPEs in block 00 to 3F
vm-test-run-update-hardware-configuration> target # [    0.574311] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
vm-test-run-update-hardware-configuration> target # [    0.574714] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
vm-test-run-update-hardware-configuration> target # [    0.575779] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]
vm-test-run-update-hardware-configuration> target # [    0.576809] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
vm-test-run-update-hardware-configuration> target # [    0.578137] PCI host bridge to bus 0000:00
vm-test-run-update-hardware-configuration> target # [    0.578714] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.579732] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.580707] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.581708] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.582706] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.583707] pci_bus 0000:00: root bus resource [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.584706] pci_bus 0000:00: root bus resource [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.585819] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.587499] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.590831] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
vm-test-run-update-hardware-configuration> target # [    0.591755] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
vm-test-run-update-hardware-configuration> target # [    0.592760] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
vm-test-run-update-hardware-configuration> target # [    0.594090] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
vm-test-run-update-hardware-configuration> target # [    0.595695] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.598721] pci 0000:00:02.0: BAR 0 [io  0xc180-0xc19f]
vm-test-run-update-hardware-configuration> target # [    0.599796] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
vm-test-run-update-hardware-configuration> target # [    0.600757] pci 0000:00:02.0: BAR 4 [mem 0xe0000000000-0xe0000003fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.601722] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]
vm-test-run-update-hardware-configuration> target # [    0.603939] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.607502] pci 0000:00:03.0: BAR 0 [io  0xc1a0-0xc1bf]
vm-test-run-update-hardware-configuration> target # [    0.608723] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
vm-test-run-update-hardware-configuration> target # [    0.609755] pci 0000:00:03.0: BAR 4 [mem 0xe0000004000-0xe0000007fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.611942] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.615292] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
vm-test-run-update-hardware-configuration> target # [    0.615744] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
vm-test-run-update-hardware-configuration> target # [    0.616754] pci 0000:00:04.0: BAR 4 [mem 0xe0000008000-0xe000000bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.618888] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.621721] pci 0000:00:05.0: BAR 0 [io  0xc080-0xc0ff]
vm-test-run-update-hardware-configuration> target # [    0.622788] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]
vm-test-run-update-hardware-configuration> target # [    0.623760] pci 0000:00:05.0: BAR 4 [mem 0xe000000c000-0xe000000ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.625891] pci 0000:00:06.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.628732] pci 0000:00:06.0: BAR 0 [io  0xc1c0-0xc1df]
vm-test-run-update-hardware-configuration> target # [    0.629724] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]
vm-test-run-update-hardware-configuration> target # [    0.630755] pci 0000:00:06.0: BAR 4 [mem 0xe0000010000-0xe0000013fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.631729] pci 0000:00:06.0: ROM [mem 0xfeb80000-0xfebbffff pref]
vm-test-run-update-hardware-configuration> target # [    0.633806] pci 0000:00:07.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.635730] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]
vm-test-run-update-hardware-configuration> target # [    0.636755] pci 0000:00:07.0: BAR 4 [mem 0xe0000014000-0xe0000017fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.638875] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.642147] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]
vm-test-run-update-hardware-configuration> target # [    0.642755] pci 0000:00:08.0: BAR 4 [mem 0xe0000018000-0xe000001bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.644976] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.647328] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]
vm-test-run-update-hardware-configuration> target # [    0.648146] pci 0000:00:09.0: BAR 4 [mem 0xe000001c000-0xe000001ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.651002] pci 0000:00:0a.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.653740] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]
vm-test-run-update-hardware-configuration> target # [    0.654789] pci 0000:00:0a.0: BAR 4 [mem 0xe0000020000-0xe0000023fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.656829] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.659731] pci 0000:00:0b.0: BAR 0 [io  0xc100-0xc13f]
vm-test-run-update-hardware-configuration> target # [    0.660719] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]
vm-test-run-update-hardware-configuration> target # [    0.661747] pci 0000:00:0b.0: BAR 4 [mem 0xe0000024000-0xe0000027fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.663803] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.666718] pci 0000:00:0c.0: BAR 0 [io  0xc1e0-0xc1ff]
vm-test-run-update-hardware-configuration> target # [    0.667717] pci 0000:00:0c.0: BAR 1 [mem 0xfebdb000-0xfebdbfff]
vm-test-run-update-hardware-configuration> target # [    0.668747] pci 0000:00:0c.0: BAR 4 [mem 0xe0000028000-0xe000002bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.671222] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.672732] pci 0000:00:1d.0: BAR 4 [io  0xc200-0xc21f]
vm-test-run-update-hardware-configuration> target # [    0.674070] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.676114] pci 0000:00:1d.1: BAR 4 [io  0xc220-0xc23f]
vm-test-run-update-hardware-configuration> target # [    0.677255] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.678763] pci 0000:00:1d.2: BAR 4 [io  0xc240-0xc25f]
vm-test-run-update-hardware-configuration> target # [    0.680126] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.681698] pci 0000:00:1d.7: BAR 0 [mem 0xfebdc000-0xfebdcfff]
vm-test-run-update-hardware-configuration> target # [    0.683207] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.684494] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
vm-test-run-update-hardware-configuration> target # [    0.686582] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.688756] pci 0000:00:1f.2: BAR 4 [io  0xc260-0xc27f]
vm-test-run-update-hardware-configuration> target # [    0.689722] pci 0000:00:1f.2: BAR 5 [mem 0xfebdd000-0xfebddfff]
vm-test-run-update-hardware-configuration> target # [    0.691295] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.693150] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
vm-test-run-update-hardware-configuration> target # [    0.699556] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.700886] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.701849] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.702835] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.703897] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.704852] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.705847] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.706848] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.707763] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.708728] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.709723] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.710723] ACPI: PCI: Interrupt link GSID configured for IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.711723] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
vm-test-run-update-hardware-configuration> target # [    0.712724] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
vm-test-run-update-hardware-configuration> target # [    0.713730] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
vm-test-run-update-hardware-configuration> target # [    0.714728] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
vm-test-run-update-hardware-configuration> target # [    0.716961] iommu: Default domain type: Translated
vm-test-run-update-hardware-configuration> target # [    0.717715] iommu: DMA domain TLB invalidation policy: lazy mode
vm-test-run-update-hardware-configuration> target # [    0.718966] ACPI: bus type USB registered
vm-test-run-update-hardware-configuration> target # [    0.719768] usbcore: registered new interface driver usbfs
vm-test-run-update-hardware-configuration> target # [    0.720725] usbcore: registered new interface driver hub
vm-test-run-update-hardware-configuration> target # [    0.721717] usbcore: registered new device driver usb
vm-test-run-update-hardware-configuration> target # [    0.723816] NetLabel: Initializing
vm-test-run-update-hardware-configuration> target # [    0.724705] NetLabel:  domain hash size = 128
vm-test-run-update-hardware-configuration> target # [    0.725705] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
vm-test-run-update-hardware-configuration> target # [    0.726775] NetLabel:  unlabeled traffic allowed by default
vm-test-run-update-hardware-configuration> target # [    0.727722] PCI: Using ACPI for IRQ routing
vm-test-run-update-hardware-configuration> target # [    0.817651] pci 0000:00:01.0: vgaarb: setting as boot VGA device
vm-test-run-update-hardware-configuration> target # [    0.817701] pci 0000:00:01.0: vgaarb: bridge control possible
vm-test-run-update-hardware-configuration> target # [    0.817701] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vm-test-run-update-hardware-configuration> target # [    0.817717] vgaarb: loaded
vm-test-run-update-hardware-configuration> target # [    0.818833] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
vm-test-run-update-hardware-configuration> target # [    0.819707] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
vm-test-run-update-hardware-configuration> target # [    0.825825] clocksource: Switched to clocksource kvm-clock
vm-test-run-update-hardware-configuration> target # [    0.830615] VFS: Disk quotas dquot_6.6.0
vm-test-run-update-hardware-configuration> target # [    0.831861] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
vm-test-run-update-hardware-configuration> target # [    0.833883] pnp: PnP ACPI init
vm-test-run-update-hardware-configuration> target # [    0.835062] ACPI: IRQ 4 override to edge(!), high(!)
vm-test-run-update-hardware-configuration> target # [    0.836527] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
vm-test-run-update-hardware-configuration> target # [    0.838822] pnp: PnP ACPI: found 5 devices
vm-test-run-update-hardware-configuration> target # [    0.846788] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
vm-test-run-update-hardware-configuration> target # [    0.848936] clocksource: Switched to clocksource acpi_pm
vm-test-run-update-hardware-configuration> target # [    0.850394] NET: Registered PF_INET protocol family
vm-test-run-update-hardware-configuration> target # [    0.852872] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.873569] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.875928] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.877977] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.880058] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.881944] TCP: Hash tables configured (established 32768 bind 32768)
vm-test-run-update-hardware-configuration> target # [    0.884513] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.886340] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.888090] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.890158] NET: Registered PF_UNIX/PF_LOCAL protocol family
vm-test-run-update-hardware-configuration> target # [    0.893928] NET: Registered PF_XDP protocol family
vm-test-run-update-hardware-configuration> target # [    0.895264] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.896871] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.898486] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.900294] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.902058] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.903859] pci_bus 0000:00: resource 9 [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.906873] ACPI: \_SB_.GSIA: Enabled at IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.910003] ACPI: \_SB_.GSIB: Enabled at IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.912726] ACPI: \_SB_.GSIC: Enabled at IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.915722] ACPI: \_SB_.GSID: Enabled at IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.918135] PCI: CLS 0 bytes, default 64
vm-test-run-update-hardware-configuration> target # [    0.919258] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
vm-test-run-update-hardware-configuration> target # [    0.921144] Trying to unpack rootfs image as initramfs...
vm-test-run-update-hardware-configuration> target # [    0.926763] software IO TLB: mapped [mem 0x000000007a36e000-0x000000007e36e000] (64MB)
vm-test-run-update-hardware-configuration> target # [    0.933007] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d4d0b6d3, max_idle_ns: 440795255641 ns
vm-test-run-update-hardware-configuration> target # [    0.976690] Initialise system trusted keyrings
vm-test-run-update-hardware-configuration> target # [    0.979928] workingset: timestamp_bits=40 max_order=20 bucket_order=0
vm-test-run-update-hardware-configuration> target # [    0.999970] Key type asymmetric registered
vm-test-run-update-hardware-configuration> target # [    1.000939] Asymmetric key parser 'x509' registered
vm-test-run-update-hardware-configuration> target # [    1.003921] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
vm-test-run-update-hardware-configuration> target # [    1.009938] io scheduler mq-deadline registered
vm-test-run-update-hardware-configuration> target # [    1.011147] io scheduler kyber registered
vm-test-run-update-hardware-configuration> target # [    1.014411] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
vm-test-run-update-hardware-configuration> target # [    1.018208] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
vm-test-run-update-hardware-configuration> target # [    1.025930] Linux agpgart interface v0.103
vm-test-run-update-hardware-configuration> target # [    1.028957] ACPI: bus type drm_connector registered
vm-test-run-update-hardware-configuration> target # [    1.033017] usbcore: registered new interface driver usbserial_generic
vm-test-run-update-hardware-configuration> target # [    1.034726] usbserial: USB Serial support registered for generic
vm-test-run-update-hardware-configuration> target # [    1.037985] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.
vm-test-run-update-hardware-configuration> target # [    1.037985] Please enable it if your BIOS has the CPPC option.
vm-test-run-update-hardware-configuration> target # [    1.041308] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
vm-test-run-update-hardware-configuration> target # [    1.048035] drop_monitor: Initializing network drop monitor service
vm-test-run-update-hardware-configuration> target # [    1.049762] NET: Registered PF_INET6 protocol family
vm-test-run-update-hardware-configuration> target # [    1.053360] Segment Routing with IPv6
vm-test-run-update-hardware-configuration> target # [    1.056895] In-situ OAM (IOAM) with IPv6
vm-test-run-update-hardware-configuration> target # [    1.058171] IPI shorthand broadcast: enabled
vm-test-run-update-hardware-configuration> target # [    1.067515] sched_clock: Marking stable (844022908, 222831938)->(1229858238, -163003392)
vm-test-run-update-hardware-configuration> target # [    1.074114] registered taskstats version 1
vm-test-run-update-hardware-configuration> target # [    1.075478] Loading compiled-in X.509 certificates
vm-test-run-update-hardware-configuration> target # [    1.100746] Demotion targets for Node 0: null
vm-test-run-update-hardware-configuration> target # [    1.104052] Key type .fscrypt registered
vm-test-run-update-hardware-configuration> target # [    1.106882] Key type fscrypt-provisioning registered
vm-test-run-update-hardware-configuration> target # [    1.108342] ima: No TPM chip found, activating TPM-bypass!
vm-test-run-update-hardware-configuration> target # [    1.112892] ima: Allocated hash algorithm: sha1
vm-test-run-update-hardware-configuration> target # [    1.114063] ima: No architecture policies found
vm-test-run-update-hardware-configuration> target # [    1.118144] PM:   Magic number: 10:75:33
vm-test-run-update-hardware-configuration> target # [    1.120465] RAS: Correctable Errors collector initialized.
vm-test-run-update-hardware-configuration> target # [    1.129065] clk: Disabling unused clocks
vm-test-run-update-hardware-configuration> target # [    1.131869] PM: genpd: Disabling unused power domains
vm-test-run-update-hardware-configuration> target # [    1.304454] Freeing initrd memory: 29064K
vm-test-run-update-hardware-configuration> target # [    1.308650] Freeing unused decrypted memory: 2028K
vm-test-run-update-hardware-configuration> target # [    1.312090] Freeing unused kernel image (initmem) memory: 3652K
vm-test-run-update-hardware-configuration> target # [    1.313665] Write protecting the kernel read-only data: 32768k
vm-test-run-update-hardware-configuration> target # [    1.316267] Freeing unused kernel image (text/rodata gap) memory: 1184K
vm-test-run-update-hardware-configuration> target # [    1.318419] Freeing unused kernel image (rodata/data gap) memory: 720K
vm-test-run-update-hardware-configuration> target # [    1.355957] x86/mm: Checked W+X mappings: passed, no W+X pages found.
vm-test-run-update-hardware-configuration> target # [    1.357453] Run /init as init process
vm-test-run-update-hardware-configuration> target # [    1.374177] systemd[1]: Inserted module 'autofs4'
vm-test-run-update-hardware-configuration> target # [    1.392800] fuse: init (API version 7.45)
vm-test-run-update-hardware-configuration> target # [    1.399512] ACPI: \_SB_.GSIG: Enabled at IRQ 22
vm-test-run-update-hardware-configuration> target # [    1.402951] ACPI: \_SB_.GSIH: Enabled at IRQ 23
vm-test-run-update-hardware-configuration> target # [    1.407147] ACPI: \_SB_.GSIE: Enabled at IRQ 20
vm-test-run-update-hardware-configuration> target # [    1.410114] ACPI: \_SB_.GSIF: Enabled at IRQ 21
vm-test-run-update-hardware-configuration> target # [    1.425956] virtiofs virtio6: discovered new tag: nix-store
vm-test-run-update-hardware-configuration> target # [    1.432631] virtiofs virtio6: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.456756] virtiofs virtio7: discovered new tag: shared
vm-test-run-update-hardware-configuration> target # [    1.459791] virtiofs virtio7: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.478554] virtiofs virtio8: discovered new tag: xchg
vm-test-run-update-hardware-configuration> target # [    1.481275] virtiofs virtio8: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.504899] systemd[1]: Successfully made /usr/ read-only.
vm-test-run-update-hardware-configuration> target # [    1.841211] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    1.848237] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    1.849594] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    1.851050] systemd[1]: Running in initrd.
vm-test-run-update-hardware-configuration> target # [    1.852953] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    1.854751] systemd[1]: Hostname set to <target>.
vm-test-run-update-hardware-configuration> target # [    2.048647] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    2.099965] systemd[1]: Queued start job for default target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    2.104778] systemd[1]: Created slice Slice /system/modprobe.
vm-test-run-update-hardware-configuration> target # [    2.107681] systemd[1]: Created slice Slice /system/systemd-makefs.
vm-test-run-update-hardware-configuration> target # [    2.109420] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    2.111326] systemd[1]: Expecting device /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.112871] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    2.114230] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    2.115561] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    2.116747] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    2.118406] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    2.120260] systemd[1]: Listening on Journal Socket (/dev/log).
vm-test-run-update-hardware-configuration> target # [    2.122061] systemd[1]: Listening on Journal Sockets.
vm-test-run-update-hardware-configuration> target # [    2.123604] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    2.125265] systemd[1]: Listening on udev Kernel Socket.
vm-test-run-update-hardware-configuration> target # [    2.126731] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    2.129286] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    2.134922] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    2.146052] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    2.156931] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    2.159944] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    2.165945] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    2.183927] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    2.192605] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    2.196364] systemd-journald[66]: Collecting audit messages is disabled.
vm-test-run-update-hardware-configuration> target # [    2.200376] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    2.209485] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config
vm-test-run-update-hardware-configuration> target # [    2.218775] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
vm-test-run-update-hardware-configuration> target # [    2.227141] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    2.235083] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
vm-test-run-update-hardware-configuration> target # [    2.278121] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    2.287942] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    2.307493] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    2.321340] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    2.343022] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    2.366593] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    2.374250] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    2.380039] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    2.387938] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    2.180500] systemd-modules-load[67]: Inserted module 'dm_mod'[    2.405122] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # [    2.184483] systemd-modules-load[67]: Inserted module 'virtio_balloon'
vm-test-run-update-hardware-configuration> target # [    2.187382] systemd-modules-load[67]: Inserted module 'virtio_gpu'
vm-test-run-update-hardware-configuration> target # [    2.207132] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    2.245691] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    2.252559] systemd-udevd[74]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    2.277644] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    2.279909] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    2.283142] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    2.284611] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    2.741802] virtio_blk virtio2: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.773472] virtio_blk virtio2: [vda] 16777216 512-byte logical blocks (8.59 GB/8.00 GiB)
vm-test-run-update-hardware-configuration> target # [    2.815062] virtio_blk virtio3: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.825584] ehci-pci 0000:00:1d.7: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.826638] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
vm-test-run-update-hardware-configuration> target # [    2.829123] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdc000
vm-test-run-update-hardware-configuration> target # [    2.835690] virtio_blk virtio3: [vdb] 1048576 512-byte logical blocks (537 MB/512 MiB)
vm-test-run-update-hardware-configuration> target # [    2.839872] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
vm-test-run-update-hardware-configuration> target # [    2.841045] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.843628] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.846351] usb usb1: Product: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.848534] usb usb1: Manufacturer: Linux 6.18.52 ehci_hcd
vm-test-run-update-hardware-configuration> target # [    2.850856] usb usb1: SerialNumber: 0000:00:1d.7
vm-test-run-update-hardware-configuration> target # [    2.853032] hub 1-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.855261] hub 1-0:1.0: 6 ports detected
vm-test-run-update-hardware-configuration> target # [    2.864302] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
vm-test-run-update-hardware-configuration> target # [    2.883912] uhci_hcd 0000:00:1d.0: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.885001] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
vm-test-run-update-hardware-configuration> target # [    2.890793] serio: i8042 KBD port at 0x60,0x64 irq 1
vm-test-run-update-hardware-configuration> target # [    2.901564] serio: i8042 AUX port at 0x60,0x64 irq 12
vm-test-run-update-hardware-configuration> target # [    2.904889] uhci_hcd 0000:00:1d.0: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.691489] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    2.917125] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200
vm-test-run-update-hardware-configuration> target # [    2.957054] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.743221] (udev-worker)[87]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.969441] SCSI subsystem initialized
vm-test-run-update-hardware-configuration> target # [    2.751051] systemd-vconsole-setup[106]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [    2.755993] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    2.762810] (udev-worker)[91]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.993060] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.994607] usb usb2: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.014865] usb usb2: Manufacturer: Linux 6.18.52 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    3.018633] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
vm-test-run-update-hardware-configuration> target # [    3.029879] usb usb2: SerialNumber: 0000:00:1d.0
vm-test-run-update-hardware-configuration> target # [    3.042716] hub 2-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    3.051191] hub 2-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.831954] systemd[1]: Found device /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.835103] systemd[1]: Reached target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    2.837401] systemd[1]: Starting Make File System on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    3.072953] uhci_hcd 0000:00:1d.1: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.074035] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
vm-test-run-update-hardware-configuration> target # [    3.088768] uhci_hcd 0000:00:1d.1: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    3.090323] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220
vm-test-run-update-hardware-configuration> target # [    3.091430] usb 1-1: new high-speed USB device number 2 using ehci-pci
vm-test-run-update-hardware-configuration> target # [    2.875097] systemd-makefs[111]: Formatting /dev/vdb as ext4
vm-test-run-update-hardware-configuration> target # [    3.100909] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    3.102447] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    3.109977] usb usb3: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.111221] usb usb3: Manufacturer: Linux 6.18.52 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    3.114301] usb usb3: SerialNumber: 0000:00:1d.1
vm-test-run-update-hardware-configuration> target # [    3.115790] hub 3-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    3.121284] hub 3-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    3.124280] uhci_hcd 0000:00:1d.2: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.130585] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
vm-test-run-update-hardware-configuration> target # [    3.132626] uhci_hcd 0000:00:1d.2: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    3.136083] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
vm-test-run-update-hardware-configuration> target # [    3.137576] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240
vm-test-run-update-hardware-configuration> target # [    3.139423] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    3.140958] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
vm-test-run-update-hardware-configuration> target # [    3.142322] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    3.143704] ahci 0000:00:1f.2: flags: 64bit ncq only
vm-test-run-update-hardware-configuration> target # [    3.145032] usb usb4: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.146932] usb usb4: Manufacturer: Linux 6.18.52 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    3.150019] usb usb4: SerialNumber: 0000:00:1d.2
vm-test-run-update-hardware-configuration> target # [    3.152661] scsi host0: ahci
vm-test-run-update-hardware-configuration> target # [    3.153615] hub 4-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    3.156241] scsi host1: ahci
vm-test-run-update-hardware-configuration> target # [    3.157372] hub 4-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    3.159639] scsi host2: ahci
vm-test-run-update-hardware-configuration> target # [    3.163222] scsi host3: ahci
vm-test-run-update-hardware-configuration> target # [    3.165444] scsi host4: ahci
vm-test-run-update-hardware-configuration> target # [    3.172073] scsi host5: ahci
vm-test-run-update-hardware-configuration> target # [    3.172785] ata1: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd100 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.956242] systemd-makefs[111]: /dev/vdb successfully formatted as ext4 (label "vdb", uuid c32b3889-6175-4b08-b473-0d4c37ba1c38)
vm-test-run-update-hardware-configuration> target # [    2.958612] systemd[1]: Finished Make File System on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.961469] systemd[1]: Starting File System Check on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    3.201630] ata2: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd180 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.220980] ata3: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd200 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.223881] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
vm-test-run-update-hardware-configuration> target # [    3.225238] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
vm-test-run-update-hardware-configuration> target # [    3.005201] systemd-fsck[130]: vdb: clean, 12/32768 files, 6385/131072 blocks
vm-test-run-update-hardware-configuration> target # [    3.230718] usb 1-1: Product: QEMU USB Tablet
vm-test-run-update-hardware-configuration> target # [    3.231522] usb 1-1: Manufacturer: QEMU
vm-test-run-update-hardware-configuration> target # [    3.233982] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1
vm-test-run-update-hardware-configuration> target # [    3.237162] ata4: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd280 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.244560] ata5: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd300 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.250370] ata6: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd380 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.044387] systemd[1]: Finished File System Check on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    3.050157] systemd[1]: Mounting /sysroot...
vm-test-run-update-hardware-configuration> target # [    3.281791] hid: raw HID events driver (C) Jiri Kosina
vm-test-run-update-hardware-configuration> target # [    3.561853] ata4: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.563347] ata6: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.565088] ata5: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.566557] ata2: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.568081] ata1: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.569616] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.571056] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
vm-test-run-update-hardware-configuration> target # [    3.572399] ata3.00: applying bridge limits
vm-test-run-update-hardware-configuration> target # [    3.573565] ata3.00: configured for UDMA/100
vm-test-run-update-hardware-configuration> target # [    3.575275] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
vm-test-run-update-hardware-configuration> target # [    3.657446] usbcore: registered new interface driver usbhid
vm-test-run-update-hardware-configuration> target # [    3.665873] usbhid: USB HID core driver
vm-test-run-update-hardware-configuration> target # [    3.686113] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2
vm-test-run-update-hardware-configuration> target # [    3.692121] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
vm-test-run-update-hardware-configuration> target # [    3.698799] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
vm-test-run-update-hardware-configuration> target # [    3.716595] EXT4-fs (vdb): mounted filesystem c32b3889-6175-4b08-b473-0d4c37ba1c38 r/w with ordered data mode. Quota mode: none.
vm-test-run-update-hardware-configuration> target # [    3.503094] systemd[1]: Mounted /sysroot.
vm-test-run-update-hardware-configuration> target # [    3.504144] systemd[1]: Reached target Initrd Root File System.
vm-test-run-update-hardware-configuration> target # [    3.507159] systemd[1]: Starting Mountpoints Configured in the Real Root...
vm-test-run-update-hardware-configuration> target # [    3.738277] cdrom: Uniform CD-ROM driver Revision: 3.20
vm-test-run-update-hardware-configuration> target # [    3.522659] systemd-sysroot-fstab-check[150]: /sysroot should be mounted in the initrd, will request daemon-reload.
vm-test-run-update-hardware-configuration> target # [    3.530081] systemd[1]: Reload requested from client PID 150 ('systemd-sysroot') (unit initrd-parse-etc.service)...
vm-test-run-update-hardware-configuration> target # [    3.532040] systemd[1]: Reloading...
vm-test-run-update-hardware-configuration> target # [    3.625068] systemd[1]: Reloading finished in 94 ms.
vm-test-run-update-hardware-configuration> target # [    3.633075] systemd-sysroot-fstab-check[150]: Requesting initrd-fs.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    3.635976] systemd-sysroot-fstab-check[150]: Requesting swap.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    3.641518] systemd[1]: initrd-parse-etc.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.643584] systemd[1]: Finished Mountpoints Configured in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.645229] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.
vm-test-run-update-hardware-configuration> target # [    3.972271] systemd[1]: Mounting /sysroot/nix/.ro-store...
vm-test-run-update-hardware-configuration> target # [    3.977137] systemd[1]: Mounting /sysroot/nix/.rw-store...
vm-test-run-update-hardware-configuration> target # [    3.982175] systemd[1]: Mounting /sysroot/run...
vm-test-run-update-hardware-configuration> target # [    3.988182] systemd[1]: Mounting /sysroot/tmp/shared...
vm-test-run-update-hardware-configuration> target # [    3.993205] systemd[1]: Mounting /sysroot/tmp/xchg...
vm-test-run-update-hardware-configuration> target # [    4.022984] systemd[1]: Mounted /sysroot/nix/.rw-store.
vm-test-run-update-hardware-configuration> target # [    4.031076] systemd[1]: Mounted /sysroot/nix/.ro-store.
vm-test-run-update-hardware-configuration> target # [    4.034855] systemd[1]: Mounted /sysroot/run.
vm-test-run-update-hardware-configuration> target # [    4.036252] systemd[1]: Mounted /sysroot/tmp/shared.
vm-test-run-update-hardware-configuration> target # [    4.040220] systemd[1]: Mounted /sysroot/tmp/xchg.
vm-test-run-update-hardware-configuration> target # [    4.045773] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    4.057789] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.059859] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    4.965387] systemd[1]: Mounting /sysroot/nix/store...
vm-test-run-update-hardware-configuration> target # [    4.994112] systemd[1]: Mounted /sysroot/nix/store.
vm-test-run-update-hardware-configuration> target # [    4.996288] systemd[1]: Reached target Initrd File Systems.
vm-test-run-update-hardware-configuration> target # [    4.999093] systemd[1]: Starting Find NixOS closure...
vm-test-run-update-hardware-configuration> target # [    5.001621] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...
vm-test-run-update-hardware-configuration> target # [    5.023858] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    5.026220] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.032814] systemd[1]: Finished Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    5.034351] systemd[1]: Reached target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    5.036425] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...
vm-test-run-update-hardware-configuration> target # [    5.055611] systemd[1]: Stopped target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    5.056974] systemd[1]: Stopped target Basic System.
vm-test-run-update-hardware-configuration> target # [    5.058141] systemd[1]: Stopped target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    5.059509] systemd[1]: Stopped target Path Units.
vm-test-run-update-hardware-configuration> target # [    5.060826] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.063190] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    5.064873] systemd[1]: Stopped target Slice Units.
vm-test-run-update-hardware-configuration> target # [    5.065986] systemd[1]: Stopped target Socket Units.
vm-test-run-update-hardware-configuration> target # [    5.067287] systemd[1]: Stopped target System Initialization.
vm-test-run-update-hardware-configuration> target # [    5.068984] systemd[1]: Stopped target Swaps.
vm-test-run-update-hardware-configuration> target # [    5.071114] systemd[1]: Stopped target Timer Units.
vm-test-run-update-hardware-configuration> target # [    5.072263] systemd[1]: dbus.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.073541] systemd[1]: Closed D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    5.076101] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.077680] systemd[1]: Stopped Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    5.078921] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    5.080226] systemd[1]: systemd-sysctl.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.082219] systemd[1]: Stopped Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    5.083406] systemd[1]: systemd-modules-load.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.085158] systemd[1]: Stopped Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    5.086173] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.088126] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    5.089538] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.091243] systemd[1]: Stopped Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    5.092858] systemd[1]: Stopped target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    5.095169] systemd[1]: Stopped target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    5.096953] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.099142] systemd[1]: Stopped Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    5.100301] systemd[1]: Stopping Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    5.103161] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.105137] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    5.111525] systemd[1]: initrd-cleanup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.115439] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.
vm-test-run-update-hardware-configuration> target # [    5.124901] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.126774] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    5.132480] systemd[1]: systemd-udevd.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.134401] systemd[1]: Stopped Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    5.136684] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.139189] systemd[1]: Closed udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    5.140656] systemd[1]: Starting Cleanup udev Database...
vm-test-run-update-hardware-configuration> target # [    5.141942] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.143904] systemd[1]: Stopped Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    5.145133] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.147187] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    5.148689] systemd[1]: kmod-static-nodes.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.151154] systemd[1]: Stopped Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    5.166197] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.169096] systemd[1]: Finished Cleanup udev Database.
vm-test-run-update-hardware-configuration> target # [    5.170150] systemd[1]: Reached target Switch Root.
vm-test-run-update-hardware-configuration> target # [    5.171796] systemd[1]: Starting NixOS Activation...
vm-test-run-update-hardware-configuration> target # [    5.230624] initrd-nixos-activation-start[202]: booting system configuration /nix/store/nzvg05gsj9z9wgzk0912dww5v6ah4pzh-nixos-system-target-test
vm-test-run-update-hardware-configuration> target # [    5.255105] initrd-nixos-activation-start[202]: running activation script...
vm-test-run-update-hardware-configuration> target # [    5.460570] initrd-nixos-activation-start[225]: setting up /etc...
vm-test-run-update-hardware-configuration> target # [    5.589673] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.592109] systemd[1]: Finished NixOS Activation.
vm-test-run-update-hardware-configuration> target # [    5.595162] systemd[1]: Starting Switch Root...
vm-test-run-update-hardware-configuration> target # [    5.608559] systemd[1]: Switching root.
vm-test-run-update-hardware-configuration> target # [    5.959116] systemd-journald[66]: Received SIGTERM from PID 1 (systemd).
vm-test-run-update-hardware-configuration> target: waiting for TCP port 22 on localhost
vm-test-run-update-hardware-configuration> target: waiting for the VM to finish booting
vm-test-run-update-hardware-configuration> target # [   17.658148] NET: Registered PF_VSOCK protocol family
vm-test-run-update-hardware-configuration> target # [   18.028499] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [   18.033296] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [   18.034153] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [   18.035074] systemd[1]: Detected first boot.
vm-test-run-update-hardware-configuration> target # [   18.036613] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [   18.227183] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [   18.283096] systemd[1]: Applying preset policy.
vm-test-run-update-hardware-configuration> target # [   18.434056] systemd[1]: Populated /etc with preset unit settings.
vm-test-run-update-hardware-configuration> target # [   18.610853] systemd[1]: initrd-switch-root.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   18.612440] systemd[1]: Stopped initrd-switch-root.service.
vm-test-run-update-hardware-configuration> target # [   18.615114] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
vm-test-run-update-hardware-configuration> target # [   18.617318] systemd[1]: Created slice Slice /system/getty.
vm-test-run-update-hardware-configuration> target # [   18.618765] systemd[1]: Created slice User and Session Slice.
vm-test-run-update-hardware-configuration> target # [   18.619832] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [   18.621211] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
vm-test-run-update-hardware-configuration> target # [   18.622501] systemd[1]: Expecting device /dev/hvc0...
vm-test-run-update-hardware-configuration> target # [   18.623448] systemd[1]: Expecting device /dev/ttyS0...
vm-test-run-update-hardware-configuration> target # [   18.624439] systemd[1]: Reached target Local Encrypted Volumes.
vm-test-run-update-hardware-configuration> target # [   18.625515] systemd[1]: Stopped target initrd-fs.target.
vm-test-run-update-hardware-configuration> target # [   18.626501] systemd[1]: Stopped target initrd-root-fs.target.
vm-test-run-update-hardware-configuration> target # [   18.627564] systemd[1]: Stopped target initrd-switch-root.target.
vm-test-run-update-hardware-configuration> target # [   18.628740] systemd[1]: Reached target Virtual Machines and Containers.
vm-test-run-update-hardware-configuration> target # [   18.629930] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [   18.630898] systemd[1]: Reached target Remote File Systems.
vm-test-run-update-hardware-configuration> target # [   18.631935] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [   18.632900] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [   18.634809] systemd[1]: Listening on Query the User Interactively for a Password.
vm-test-run-update-hardware-configuration> target # [   18.637244] systemd[1]: Listening on Process Core Dump Socket.
vm-test-run-update-hardware-configuration> target # [   18.639040] systemd[1]: Listening on Credential Encryption/Decryption.
vm-test-run-update-hardware-configuration> target # [   18.640932] systemd[1]: Listening on Factory Reset Management.
vm-test-run-update-hardware-configuration> target # [   18.642020] systemd[1]: Listening on Hostname Service Socket.
vm-test-run-update-hardware-configuration> target # [   18.644558] systemd[1]: Starting Journal Log Access Socket...
vm-test-run-update-hardware-configuration> target # [   18.646037] systemd[1]: Listening on Journal Audit Socket.
vm-test-run-update-hardware-configuration> target # [   18.648581] systemd[1]: Listening on Console Output Muting Service Socket.
vm-test-run-update-hardware-configuration> target # [   18.649888] systemd[1]: Listening on Network Management Metrics Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   18.651266] systemd[1]: Listening on Network Management Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   18.652460] systemd[1]: Listening on Network Management Netlink Socket.
vm-test-run-update-hardware-configuration> target # [   18.653665] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
vm-test-run-update-hardware-configuration> target # [   18.654945] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [   18.656440] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
vm-test-run-update-hardware-configuration> target # [   18.660175] systemd[1]: Listening on Disk Repartitioning Service Socket.
vm-test-run-update-hardware-configuration> target # [   18.661380] systemd[1]: Listening on Resolve Monitor Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   18.662516] systemd[1]: Listening on Resolve Service Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   18.663668] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [   18.664689] systemd[1]: Listening on udev Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   18.666827] systemd[1]: Mounting Huge Pages File System...
vm-test-run-update-hardware-configuration> target # [   18.669790] systemd[1]: Mounting POSIX Message Queue File System...
vm-test-run-update-hardware-configuration> target # [   18.676889] systemd[1]: Mounting Kernel Debug File System...
vm-test-run-update-hardware-configuration> target # [   18.684456] systemd[1]: Mounting Kernel Trace File System...
vm-test-run-update-hardware-configuration> target # [   18.693263] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [   18.708594] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [   18.716858] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
vm-test-run-update-hardware-configuration> target # [   18.726901] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore
vm-test-run-update-hardware-configuration> target # [   18.730745] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [   18.738092] systemd[1]: Mounting FUSE Control File System...
vm-test-run-update-hardware-configuration> target # [   18.741902] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
vm-test-run-update-hardware-configuration> target # [   18.752854] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [   18.757501] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [   18.768891] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...
vm-test-run-update-hardware-configuration> target # [   18.784324] systemd[1]: Starting Remount Root and Kernel File Systems...
vm-test-run-update-hardware-configuration> target # [   18.787630] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [   18.798903] systemd-journald[295]: Collecting audit messages is enabled.
vm-test-run-update-hardware-configuration> target # [   18.800119] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [   18.811457] systemd[1]: Listening on Journal Log Access Socket.
vm-test-run-update-hardware-configuration> target # [   18.816327] systemd[1]: Mounted Huge Pages File System.
vm-test-run-update-hardware-configuration> target # [   18.820192] systemd[1]: Mounted POSIX Message Queue File System.
vm-test-run-update-hardware-configuration> target # [   18.832016] systemd[1]: Mounted Kernel Debug File System.
vm-test-run-update-hardware-configuration> target # [   18.838497] loop: module loaded
vm-test-run-update-hardware-configuration> target # [   18.839369] systemd[1]: Mounted Kernel Trace File System.
vm-test-run-update-hardware-configuration> target # [   18.852783] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [   18.631916] systemd[1]: Queued start job for default target Multi-User System.
vm-test-run-update-hardware-configuration> target # [   18.634486] systemd[1]: Unnecessary job was removed for /dev/vdb.
vm-test-run-update-hardware-configuration> target # [   18.858552] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [   18.638259] systemd[1]: systemd-journald.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   18.639875] systemd-modules-load[296]: Inserted module 'loop'
vm-test-run-update-hardware-configuration> target # [   18.642935] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   18.650705] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [   18.652478] systemd[1]: Mounted FUSE Control File System.
vm-test-run-update-hardware-configuration> target # [   18.654244] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [   18.883773] EXT4-fs (vdb): re-mounted c32b3889-6175-4b08-b473-0d4c37ba1c38.
vm-test-run-update-hardware-configuration> target # [   18.664194] systemd-oomd[298]: No swap; memory pressure usage will be degraded
vm-test-run-update-hardware-configuration> target # [   18.669113] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.
vm-test-run-update-hardware-configuration> target # [   18.671518] systemd[1]: Finished Remount Root and Kernel File Systems.
vm-test-run-update-hardware-configuration> target # [   18.680096] systemd[1]: Listening on Disk Image Download Service Socket.
vm-test-run-update-hardware-configuration> target # [   18.684461] systemd[1]: Mounting Kernel Configuration File System...
vm-test-run-update-hardware-configuration> target # [   18.687914] systemd[1]: Starting Firewall...
vm-test-run-update-hardware-configuration> target # [   18.695992] systemd[1]: Starting Flush Journal to Persistent Storage...
vm-test-run-update-hardware-configuration> target # [   18.697225] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore
vm-test-run-update-hardware-configuration> target # [   18.708085] systemd[1]: Starting Load/Save OS Random Seed...
vm-test-run-update-hardware-configuration> target # [   18.722564] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [   18.730834] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [   18.732785] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [   18.972918] systemd-journald[295]: Received client request to flush runtime journal.
vm-test-run-update-hardware-configuration> target # [   19.040709] systemd[1]: Mounted Kernel Configuration File System.
vm-test-run-update-hardware-configuration> target # [   19.045548] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [   19.047986] systemd[1]: Starting Network Name Resolution...
vm-test-run-update-hardware-configuration> target # [   19.052596] systemd[1]: Finished Load/Save OS Random Seed.
vm-test-run-update-hardware-configuration> target # [   19.054699] systemd[1]: Reached target First Boot Complete.
vm-test-run-update-hardware-configuration> target # [   19.057338] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [   19.059453] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [   19.062937] systemd-resolved[323]: Positive Trust Anchors:
vm-test-run-update-hardware-configuration> target # [   19.064914] systemd-resolved[323]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
vm-test-run-update-hardware-configuration> target # [   19.067245] systemd-resolved[323]: . IN DS 38696 8 2 683d2d0acb8c9b712a1948b27f741219298d0a450d612c483af444a4c0fb2b16
vm-test-run-update-hardware-configuration> target # [   19.070163] systemd-resolved[323]: Negative trust anchors: home.arpa 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 170.0.0.192.in-addr.arpa 171.0.0.192.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa ipv4only.arpa resolver.arpa corp home internal intranet lan local private test
vm-test-run-update-hardware-configuration> target # [   19.081372] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [   19.083173] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [   19.084446] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [   19.086187] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [   19.087230] systemd-resolved[323]: Using system hostname 'target'.
vm-test-run-update-hardware-configuration> target # [   19.088355] systemd[1]: Finished Flush Journal to Persistent Storage.
vm-test-run-update-hardware-configuration> target # [   19.089497] systemd[1]: Started Network Name Resolution.
vm-test-run-update-hardware-configuration> target # [   19.110850] systemd-udevd[336]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [   19.150139] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [   19.271113] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [   19.346310] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.
vm-test-run-update-hardware-configuration> target # [   19.394413] (udev-worker)[369]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [   19.396634] systemd[1]: Mounting /run/wrappers...
vm-test-run-update-hardware-configuration> target # [   19.410173] (udev-worker)[366]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [   19.419465] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.
vm-test-run-update-hardware-configuration> target # [   19.431782] systemd[1]: Mounted /run/wrappers.
vm-test-run-update-hardware-configuration> target # [   19.434088] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [   19.438538] systemd[1]: Listening on Boot Loader Control Service Socket.
vm-test-run-update-hardware-configuration> target # [   19.441481] systemd[1]: Starting register-nix-paths.service...
vm-test-run-update-hardware-configuration> target # [   19.447333] systemd[1]: Starting Create SUID/SGID Wrappers...
vm-test-run-update-hardware-configuration> target # [   19.448448] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.
vm-test-run-update-hardware-configuration> target # [   19.455666] systemd[1]: Starting Save Transient machine-id to Disk...
vm-test-run-update-hardware-configuration> target # [   19.465400] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [   19.602921] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [   19.615310] systemd[1]: Starting Rebuild Journal Catalog...
vm-test-run-update-hardware-configuration> target # [   19.623783] systemd[1]: Starting Record System Boot/Shutdown in UTMP...
vm-test-run-update-hardware-configuration> target # [   19.726727] systemd[1]: Finished Record System Boot/Shutdown in UTMP.
vm-test-run-update-hardware-configuration> target # [   19.760201] systemd[1]: Finished Rebuild Journal Catalog.
vm-test-run-update-hardware-configuration> target # [   19.768591] systemd[1]: Starting Update is Completed...
vm-test-run-update-hardware-configuration> target # [   19.830185] systemd[1]: Finished Update is Completed.
vm-test-run-update-hardware-configuration> target # [   20.169571] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
vm-test-run-update-hardware-configuration> target # [   20.179028] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console
vm-test-run-update-hardware-configuration> target # [   19.979461] systemd[1]: Finished Firewall.
vm-test-run-update-hardware-configuration> target # [   19.982226] systemd[1]: Reached target Preparation for Network.
vm-test-run-update-hardware-configuration> target # [   19.983370] systemd[1]: Listening on Network Management Resolve Hook Socket.
vm-test-run-update-hardware-configuration> target # [   19.986815] systemd[1]: Starting Network Management...
vm-test-run-update-hardware-configuration> target # [   20.007196] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   20.023379] systemd[1]: Finished Create SUID/SGID Wrappers.
vm-test-run-update-hardware-configuration> target # [   20.259297] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:07.0/virtio5/input/input4
vm-test-run-update-hardware-configuration> target # [   20.143978] systemd-resolved[323]: Clock change detected. Flushing caches.
vm-test-run-update-hardware-configuration> target # [   20.270790] ACPI: button: Power Button [PWRF]
vm-test-run-update-hardware-configuration> target # [   20.306001] mousedev: PS/2 mouse device common for all mice
vm-test-run-update-hardware-configuration> target # [   20.334967] rtc_cmos PNP0B00:00: RTC can wake from S4
vm-test-run-update-hardware-configuration> target # [   20.349844] Console: switching to colour dummy device 80x25
vm-test-run-update-hardware-configuration> target # [   20.359802] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
vm-test-run-update-hardware-configuration> target # [   20.366020] rtc_cmos PNP0B00:00: registered as rtc0
vm-test-run-update-hardware-configuration> target # [   20.366129] rtc_cmos PNP0B00:00: setting system clock to 2026-09-20T15:02:52 UTC (1789916572)
vm-test-run-update-hardware-configuration> target # [   20.366223] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
vm-test-run-update-hardware-configuration> target # [   20.372374] parport_pc 00:02: reported by Plug and Play ACPI
vm-test-run-update-hardware-configuration> target # [   20.372461] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
vm-test-run-update-hardware-configuration> target # [   20.275842] systemd-networkd[519]: lo: Link UP
vm-test-run-update-hardware-configuration> target # [   20.276999] systemd-networkd[519]: lo: Gained carrier
vm-test-run-update-hardware-configuration> target # [   20.426659] cfg80211: Loading compiled-in X.509 certificates for regulatory database
vm-test-run-update-hardware-configuration> target # [   20.461309] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
vm-test-run-update-hardware-configuration> target # [   20.461398] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
vm-test-run-update-hardware-configuration> target # [   20.285199] systemd[1]: Started Network Management.
vm-test-run-update-hardware-configuration> target # [   20.286319] systemd[1]: Reached target Network.
vm-test-run-update-hardware-configuration> target # [   20.288615] systemd-networkd[519]: eth0: Configuring with /etc/systemd/network/99-ethernet-default-dhcp.network.
vm-test-run-update-hardware-configuration> target # [   20.295499] systemd[1]: Starting Enable Persistent Storage in systemd-networkd...
vm-test-run-update-hardware-configuration> target # [   20.297216] systemd-networkd[519]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [   20.300421] systemd-networkd[519]: eth1: Configuring with /etc/systemd/network/40-eth1.network.
vm-test-run-update-hardware-configuration> target # [   20.305178] systemd-networkd[519]: eth0: Link UP
vm-test-run-update-hardware-configuration> target # [   20.311807] systemd-networkd[519]: eth0: Gained carrier
vm-test-run-update-hardware-configuration> target # [   20.323279] systemd[1]: Finished register-nix-paths.service.
vm-test-run-update-hardware-configuration> target # [   20.326564] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [   20.328388] systemd[1]: Started Discard unused filesystem blocks once a week.
vm-test-run-update-hardware-configuration> target # [   20.332226] systemd[1]: Started Daily Cleanup of Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   20.335867] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [   20.337058] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   20.340171] systemd[1]: Listening on Nix Daemon Socket.
vm-test-run-update-hardware-configuration> target # [   20.345253] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).
vm-test-run-update-hardware-configuration> target # [   20.346771] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.
vm-test-run-update-hardware-configuration> target # [   20.348270] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [   20.349223] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   20.353975] systemd[1]: Started backdoor.service.
vm-test-run-update-hardware-configuration> target # [   20.358115] systemd[1]: Starting Import lastlog data into lastlog2 database...
vm-test-run-update-hardware-configuration> target # [   20.366137] systemd[1]: Starting Name Service Cache Daemon (nsncd)...
vm-test-run-update-hardware-configuration> target # [   20.462370] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
vm-test-run-update-hardware-configuration> target # [   20.462374] cfg80211: failed to load regulatory.db
vm-test-run-update-hardware-configuration> target # [   20.564318] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6
vm-test-run-update-hardware-configuration> target # [   20.386798] systemd[1]: Starting Post-Boot Actions...
vm-test-run-update-hardware-configuration> target # [   20.387826] systemd-networkd[519]: eth1: Link UP
vm-test-run-update-hardware-configuration> target # [   20.391805] systemd-networkd[519]: eth1: Gained carrier
vm-test-run-update-hardware-configuration> target # [   20.392814] systemd-networkd[519]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [   20.400194] systemd[1]: Started Reset console on configuration changes.
vm-test-run-update-hardware-configuration> target # [   20.409621] systemd-networkd[519]: eth0: DHCPv4 address 10.0.2.15/24, gateway 10.0.2.2 acquired from 10.0.2.2
vm-test-run-update-hardware-configuration> target # [   20.423127] systemd[1]: Starting SSH Host Keys Generation...
vm-test-run-update-hardware-configuration> target # [   20.437293] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   20.461708] systemd[1]: Finished Save Transient machine-id to Disk.
vm-test-run-update-hardware-configuration> target # [   20.473303] systemd[1]: Finished Enable Persistent Storage in systemd-networkd.
vm-test-run-update-hardware-configuration> target # connecting to host...
vm-test-run-update-hardware-configuration> target # [   20.491973] systemd[1]: Started Name Service Cache Daemon (nsncd).
vm-test-run-update-hardware-configuration> target # [   20.493836] nsncd[539]: Sep 20 15:02:52.847 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"
vm-test-run-update-hardware-configuration> target # [   20.509795] systemd[1]: Reached target Host and Network Name Lookups.
vm-test-run-update-hardware-configuration> target # [   20.513972] systemd[1]: Reached target User and Group Name Lookups.
vm-test-run-update-hardware-configuration> target: Guest shell says: b'Spawning backdoor root shell...\n'
vm-test-run-update-hardware-configuration> target: connected to guest root shell
vm-test-run-update-hardware-configuration> target: (connecting took 8.84 seconds)
vm-test-run-update-hardware-configuration> target: (finished: waiting for the VM to finish booting, in 8.84 seconds)
vm-test-run-update-hardware-configuration> target # [   20.532092] systemd[1]: Starting D-Bus System Message Bus...
vm-test-run-update-hardware-configuration> target # [   20.564928] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5
vm-test-run-update-hardware-configuration> target # [   20.598513] NET: Registered PF_PACKET protocol family
vm-test-run-update-hardware-configuration> target # [   20.627262] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
vm-test-run-update-hardware-configuration> target # [   20.550315] systemd[1]: Starting User Login Management...
vm-test-run-update-hardware-configuration> target # [   20.562184] systemd[1]: Starting Permit User Sessions...
vm-test-run-update-hardware-configuration> target # [   20.569970] systemd[1]: Finished Post-Boot Actions.
vm-test-run-update-hardware-configuration> target # [   20.594107] systemd[1]: Finished Import lastlog data into lastlog2 database.
vm-test-run-update-hardware-configuration> target # [   20.677301] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   20.684950] systemd[1]: Finished Permit User Sessions.
vm-test-run-update-hardware-configuration> target # [   20.627380] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
vm-test-run-update-hardware-configuration> target # [   20.921869] [drm] Found bochs VGA, ID 0xb0c5.
vm-test-run-update-hardware-configuration> target # [   20.921871] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
vm-test-run-update-hardware-configuration> target # [   20.705748] systemd[1]: Started Getty on tty1.
vm-test-run-update-hardware-configuration> target # [   20.706684] systemd[1]: Reached target Login Prompts.
vm-test-run-update-hardware-configuration> target # [   20.734644] dbus-broker-launch[563]: Looking up NSS user entry for 'systemd-timesync'...
vm-test-run-update-hardware-configuration> target # [   20.759266] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
vm-test-run-update-hardware-configuration> target # [   20.763617] systemd-logind[570]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)
vm-test-run-update-hardware-configuration> target # [   20.766262] dbus-broker-launch[563]: NSS returned no entry for 'systemd-timesync'
vm-test-run-update-hardware-configuration> target # [   20.771114] dbus-broker-launch[563]: Invalid user-name in /nix/store/lhszk07v1701bjp6p1z8cbwkzjr5rww8-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"
vm-test-run-update-hardware-configuration> target # [   20.773713] systemd-logind[570]: New seat seat0.
vm-test-run-update-hardware-configuration> target # [   20.774716] systemd[1]: Started User Login Management.
vm-test-run-update-hardware-configuration> target # [   20.778393] systemd[1]: Starting linger-users.service...
vm-test-run-update-hardware-configuration> target # [   21.008831] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic
vm-test-run-update-hardware-configuration> target # [   21.009775] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0
vm-test-run-update-hardware-configuration> target # [   20.797480] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   20.802916] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   20.816575] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   20.819370] systemd-logind[570]: Watching system buttons on /dev/input/event2 (Power Button)
vm-test-run-update-hardware-configuration> target # [   20.827251] systemd[1]: Started D-Bus System Message Bus.
vm-test-run-update-hardware-configuration> target # [   20.851144] systemd[1]: linger-users.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   20.856238] dbus-broker-launch[563]: Ready
vm-test-run-update-hardware-configuration> target # [   20.857821] systemd[1]: Finished linger-users.service.
vm-test-run-update-hardware-configuration> target # [   21.093789] ppdev: user-space parallel port driver
vm-test-run-update-hardware-configuration> target # [   21.143113] iTCO_wdt iTCO_wdt.0.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
vm-test-run-update-hardware-configuration> target # [   20.939506] systemd-logind[570]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)
vm-test-run-update-hardware-configuration> target # [   21.190844] iTCO_wdt iTCO_wdt.0.auto: initialized. heartbeat=30 sec (nowayout=0)
vm-test-run-update-hardware-configuration> target # [   21.271490] Console: switching to colour frame buffer device 160x50
vm-test-run-update-hardware-configuration> target # [   21.293032] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device
vm-test-run-update-hardware-configuration> target # [   21.077367] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   21.082414] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   21.094293] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   21.448080] kvm_amd: TSC scaling supported
vm-test-run-update-hardware-configuration> target # [   21.448737] kvm_amd: Nested Virtualization enabled
vm-test-run-update-hardware-configuration> target # [   21.449312] kvm_amd: Nested Paging enabled
vm-test-run-update-hardware-configuration> target # [   21.452727] kvm_amd: LBR virtualization supported
vm-test-run-update-hardware-configuration> target # [   21.453315] kvm_amd: Virtual GIF supported
vm-test-run-update-hardware-configuration> target # [   21.455737] kvm_amd: Virtual NMI enabled
vm-test-run-update-hardware-configuration> target # [   21.241617] sshd-keygen-start[576]: Generating public/private rsa key pair.
vm-test-run-update-hardware-configuration> target # [   21.242892] sshd-keygen-start[576]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key
vm-test-run-update-hardware-configuration> target # [   21.244449] sshd-keygen-start[576]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
vm-test-run-update-hardware-configuration> target # [   21.245983] sshd-keygen-start[576]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [   21.246962] sshd-keygen-start[576]: SHA256:AmLodP61XcjsN7L2jWO/LZWYzr8l5mGxNr/FkwY9ses root@target
vm-test-run-update-hardware-configuration> target # [   21.248381] sshd-keygen-start[576]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [   21.249482] sshd-keygen-start[576]: +---[RSA 4096]----+
vm-test-run-update-hardware-configuration> target # [   21.250408] sshd-keygen-start[576]: |                 |
vm-test-run-update-hardware-configuration> target # [   21.252350] sshd-keygen-start[576]: | .               |
vm-test-run-update-hardware-configuration> target # [   21.253279] sshd-keygen-start[576]: |..o..          . |
vm-test-run-update-hardware-configuration> target # [   21.254203] sshd-keygen-start[576]: |o.o. .  o .   . o|
vm-test-run-update-hardware-configuration> target # [   21.255121] sshd-keygen-start[576]: | . .  ..S+ . .++.|
vm-test-run-update-hardware-configuration> target # [   21.256040] sshd-keygen-start[576]: |    . ..+ .  o.*+|
vm-test-run-update-hardware-configuration> target # [   21.256925] sshd-keygen-start[576]: |     . . + oo X=+|
vm-test-run-update-hardware-configuration> target # [   21.259845] sshd-keygen-start[576]: |         .+o+O+=+|
vm-test-run-update-hardware-configuration> target # [   21.261150] sshd-keygen-start[576]: |        ..ooo+=E+|
vm-test-run-update-hardware-configuration> target # [   21.263149] sshd-keygen-start[576]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   21.282921] sshd-keygen-start[606]: Generating public/private ed25519 key pair.
vm-test-run-update-hardware-configuration> target # [   21.284383] sshd-keygen-start[606]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
vm-test-run-update-hardware-configuration> target # [   21.285927] sshd-keygen-start[606]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
vm-test-run-update-hardware-configuration> target # [   21.289032] sshd-keygen-start[606]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [   21.290037] sshd-keygen-start[606]: SHA256:gKnIAW/vAJJ59hgKedCXB8zTDjhUD9NKyNmEotCw4TI root@target
vm-test-run-update-hardware-configuration> target # [   21.291436] sshd-keygen-start[606]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [   21.293750] sshd-keygen-start[606]: +--[ED25519 256]--+
vm-test-run-update-hardware-configuration> target # [   21.296073] sshd-keygen-start[606]: |=*.@*=           |
vm-test-run-update-hardware-configuration> target # [   21.296953] sshd-keygen-start[606]: |=OX X*+          |
vm-test-run-update-hardware-configuration> target # [   21.297858] sshd-keygen-start[606]: |E+B+o*o          |
vm-test-run-update-hardware-configuration> target # [   21.298816] sshd-keygen-start[606]: |*X.*. ..         |
vm-test-run-update-hardware-configuration> target # [   21.299908] sshd-keygen-start[606]: |o.+ o   S        |
vm-test-run-update-hardware-configuration> target # [   21.300963] sshd-keygen-start[606]: |   o             |
vm-test-run-update-hardware-configuration> target # [   21.302099] sshd-keygen-start[606]: |    .            |
vm-test-run-update-hardware-configuration> target # [   21.303800] sshd-keygen-start[606]: |                 |
vm-test-run-update-hardware-configuration> target # [   21.304779] sshd-keygen-start[606]: |                 |
vm-test-run-update-hardware-configuration> target # [   21.306226] sshd-keygen-start[606]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   21.308279] systemd[1]: sshd-keygen.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   21.309486] systemd[1]: Finished SSH Host Keys Generation.
vm-test-run-update-hardware-configuration> target # [   21.314292] systemd[1]: Starting SSH Daemon...
vm-test-run-update-hardware-configuration> target # [   21.539091] EDAC MC: Ver: 3.0.0
vm-test-run-update-hardware-configuration> target # [   21.341615] sshd[608]: Server listening on 0.0.0.0 port 22.
vm-test-run-update-hardware-configuration> target # [   21.343604] sshd[608]: Server listening on :: port 22.
vm-test-run-update-hardware-configuration> target # [   21.345240] systemd[1]: Started SSH Daemon.
vm-test-run-update-hardware-configuration> target # [   21.347131] systemd[1]: Reached target Multi-User System.
vm-test-run-update-hardware-configuration> target # [   21.400581] systemd-vconsole-setup[599]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [   21.404082] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   21.406517] systemd[1]: Startup finished in 1.142s (kernel) + 16.278s (initrd) + 3.985s (userspace) = 21.405s.
vm-test-run-update-hardware-configuration> target # Connection to localhost (::1) 22 port [tcp/ssh] succeeded!
vm-test-run-update-hardware-configuration> target: (finished: waiting for TCP port 22 on localhost, in 9.97 seconds)
vm-test-run-update-hardware-configuration> Setting up port forwarding from host port 59021 to guest port 22
vm-test-run-update-hardware-configuration> target # [   21.660584] sshd-session[615]: Connection closed by ::1 port 35068 [preauth]
vm-test-run-update-hardware-configuration> target # [   21.708879] systemd-networkd[519]: eth1: Gained IPv6LL
vm-test-run-update-hardware-configuration> target # [   22.156905] systemd-networkd[519]: eth0: Gained IPv6LL
vm-test-run-update-hardware-configuration> Host port 59021 is now listening
vm-test-run-update-hardware-configuration> target # [   23.663463] sshd-session[618]: Connection closed by 10.0.2.2 port 51328 [preauth]
vm-test-run-update-hardware-configuration> target # [   37.517684] sshd-session[624]: Accepted publickey for nonrootuser from 10.0.2.2 port 33240 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   37.524992] sshd-session[624]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   37.541989] systemd[1]: Created slice Slice /user/1000.
vm-test-run-update-hardware-configuration> target # [   37.545111] systemd[1]: Starting User Runtime Directory /run/user/1000...
vm-test-run-update-hardware-configuration> target # [   37.564654] systemd-logind[570]: New session '1' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   37.579581] systemd[1]: Finished User Runtime Directory /run/user/1000.
vm-test-run-update-hardware-configuration> target # [   37.584357] systemd[1]: Starting User Manager for UID 1000...
vm-test-run-update-hardware-configuration> target # [   37.603996] (systemd)[630]: pam_unix(systemd-user:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   37.609090] systemd-logind[570]: New session '2' of user 'nonrootuser' with class 'manager' and type 'unspecified'.
vm-test-run-update-hardware-configuration> target # [   37.628098] systemd[630]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   37.740824] systemd[630]: Queued start job for default target Main User Target.
vm-test-run-update-hardware-configuration> target # [   37.744835] systemd[630]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   37.748122] systemd[630]: Created slice User Application Slice.
vm-test-run-update-hardware-configuration> target # [   37.749499] systemd[630]: Started Daily Cleanup of User's Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   37.750874] systemd[630]: Reached target Paths.
vm-test-run-update-hardware-configuration> target # [   37.753178] systemd[630]: Reached target Timers.
vm-test-run-update-hardware-configuration> target # [   37.755195] systemd[630]: Starting D-Bus User Message Bus Socket...
vm-test-run-update-hardware-configuration> target # [   37.759261] systemd[630]: Starting Create User Files and Directories...
vm-test-run-update-hardware-configuration> target # [   37.792545] systemd[630]: Finished Create User Files and Directories.
vm-test-run-update-hardware-configuration> target # [   37.802096] systemd[630]: Listening on D-Bus User Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   37.803411] systemd[630]: Reached target Sockets.
vm-test-run-update-hardware-configuration> target # [   37.805317] systemd[630]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   37.808790] systemd[1]: Started User Manager for UID 1000.
vm-test-run-update-hardware-configuration> target # [   37.811747] systemd[630]: Starting Run user-specific NixOS activation...
vm-test-run-update-hardware-configuration> target # [   37.814657] systemd[1]: Started Session 1 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   37.847685] systemd[630]: Finished Run user-specific NixOS activation.
vm-test-run-update-hardware-configuration> target # [   37.849076] systemd[630]: Reached target Main User Target.
vm-test-run-update-hardware-configuration> target # [   37.852185] systemd[630]: Startup finished in 225ms.
vm-test-run-update-hardware-configuration> target # [   37.895396] sudo[651]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-facter
vm-test-run-update-hardware-configuration> target # [   37.902474] sudo[651]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   38.214355] sr 2:0:0:0: Attached scsi generic sg0 type 5
vm-test-run-update-hardware-configuration> target # [   38.111720] sudo[651]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   38.121193] sshd-session[642]: Received disconnect from 10.0.2.2 port 33240:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   38.122798] sshd-session[642]: Disconnected from user nonrootuser 10.0.2.2 port 33240
vm-test-run-update-hardware-configuration> target # [   38.124503] sshd-session[624]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   38.129420] systemd-logind[570]: Session 1 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> target # [   50.792671] sshd-session[683]: Accepted publickey for nonrootuser from 10.0.2.2 port 45426 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   50.799461] sshd-session[683]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   50.805753] systemd-logind[570]: New session '3' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   50.811569] systemd[1]: Started Session 3 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   50.864728] sudo[693]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-generate-config --no-filesystems --show-hardware-config
vm-test-run-update-hardware-configuration> target # [   50.872753] sudo[693]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   51.019220] sudo[693]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   51.028952] sshd-session[686]: Received disconnect from 10.0.2.2 port 45426:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   51.030558] sshd-session[686]: Disconnected from user nonrootuser 10.0.2.2 port 45426
vm-test-run-update-hardware-configuration> target # [   51.032589] sshd-session[683]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   51.037098] systemd-logind[570]: Session 3 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> (finished: run the VM test script, in 53.42 seconds)
vm-test-run-update-hardware-configuration> test script finished in 57.99s
vm-test-run-update-hardware-configuration> cleanup
vm-test-run-update-hardware-configuration> kill QemuMachine (pid 45)
vm-test-run-update-hardware-configuration> target # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/d64q19q1xjdwfhqx6czvrjgrhq0n3lcc-python3-3.14.7/bin/python3.14)
vm-test-run-update-hardware-configuration> target # [2026-09-20T15:03:29Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-09-20T15:03:29Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-09-20T15:03:29Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> (finished: cleanup, in 0.14 seconds)

post-build step Upload to niks3: ok
time=2026-09-20T15:03:34.999Z level=INFO msg="Uploading 0 paths to niks3.clan.lol (1 already cached)"
time=2026-09-20T15:03:35.883Z level=INFO msg="Uploading 1 narinfos"
time=2026-09-20T15:03:35.966Z level=INFO msg="Upload complete. (1.034s)"