these 9 derivations will be built:
  /nix/store/8pxcdlng5jrr6m6wrixhacy1sh5bk9sj-installation-test-flake-x86_64-linux.drv
  /nix/store/1x0my5sj6yq84xn3qp2q38ls0wyw0jnc-closure-info.drv
  /nix/store/svm3qbyw461yjqq2fn4sfig1168phb7l-clan-runtime.drv
  /nix/store/ci2ck3zx1l10xsy42bhdhj0k5hqhhp4x-clan-cli-source.drv
  /nix/store/i6jfcf06hx2s3fq5n2y6yk3dq4prf1sj-clan-cli.drv
  /nix/store/6vjb14wjp82w716pygl2c6zvhpd9qx51-test-script.drv
  /nix/store/1k0nbxa08w2q0x7bkh4mrdy20rva4kkw-driverConfiguration.json.drv
  /nix/store/7g86yxd579iwawlvi7rszw6kk96fc525-nixos-test-driver-update-hardware-configuration.drv
  /nix/store/vlrcxnclyas9933qrpfdlybasx90c6fy-vm-test-run-update-hardware-configuration.drv
building '/nix/store/6vjb14wjp82w716pygl2c6zvhpd9qx51-test-script.drv'
test-script> structuredAttrs is enabled
building '/nix/store/1k0nbxa08w2q0x7bkh4mrdy20rva4kkw-driverConfiguration.json.drv'
driverConfiguration.json> structuredAttrs is enabled
building '/nix/store/7g86yxd579iwawlvi7rszw6kk96fc525-nixos-test-driver-update-hardware-configuration.drv'
nixos-test-driver-update-hardware-configuration> Running type check (enable/disable: config.skipTypeCheck)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck
nixos-test-driver-update-hardware-configuration> All checks passed!
nixos-test-driver-update-hardware-configuration> Linting test script (enable/disable: config.skipLint)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint
nixos-test-driver-update-hardware-configuration> All checks passed!
building '/nix/store/vlrcxnclyas9933qrpfdlybasx90c6fy-vm-test-run-update-hardware-configuration.drv' on 'ssh-ng://builder@build-x86-01.clan.lol'
building '/nix/store/vlrcxnclyas9933qrpfdlybasx90c6fy-vm-test-run-update-hardware-configuration.drv'
vm-test-run-update-hardware-configuration> Machine state will be reset. To keep it, pass --keep-machine-state
vm-test-run-update-hardware-configuration> start all VLans
vm-test-run-update-hardware-configuration> (finished: start all VLans, in 0.00 seconds)
vm-test-run-update-hardware-configuration> Test will time out and terminate in 3600.0 seconds
vm-test-run-update-hardware-configuration> run the VM test script
vm-test-run-update-hardware-configuration> additionally exposed symbols:
vm-test-run-update-hardware-configuration>     target,
vm-test-run-update-hardware-configuration>     vlan1,
vm-test-run-update-hardware-configuration>     start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh
vm-test-run-update-hardware-configuration> target: starting vm
vm-test-run-update-hardware-configuration> target # Disk image does not exist, creating the virtualisation disk image...
vm-test-run-update-hardware-configuration> target: QEMU running (pid 45)
vm-test-run-update-hardware-configuration> target # Formatting '/build/vm-state-target/tmp.rdHf6YFD9M', fmt=raw size=8589934592
vm-test-run-update-hardware-configuration> target # mke2fs 1.47.4 (6-Mar-2025)
vm-test-run-update-hardware-configuration> target # Discarding device blocks:       0/2097152               done
vm-test-run-update-hardware-configuration> target # Creating filesystem with 2097152 4k blocks and 524288 inodes
vm-test-run-update-hardware-configuration> target # Filesystem UUID: 2ec87022-62dd-4d4a-8c77-59757b7a033f
vm-test-run-update-hardware-configuration> target # Superblock backups stored on blocks:
vm-test-run-update-hardware-configuration> target # 	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Allocating group tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Writing inode tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Creating journal (16384 blocks): done
vm-test-run-update-hardware-configuration> target # Writing superblocks and filesystem accounting information:  0/64     done
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Virtualisation disk image created.
vm-test-run-update-hardware-configuration> target # Formatting 'empty0.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=536870912 lazy_refcounts=off refcount_bits=16
vm-test-run-update-hardware-configuration> target # Starting virtiofs daemons...
vm-test-run-update-hardware-configuration> target # [2026-09-21T15:05:04Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-09-21T15:05:04Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-09-21T15:05:04Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-09-21T15:05:04Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-09-21T15:05:04Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-09-21T15:05:04Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-09-21T15:05:04Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-09-21T15:05:04Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-09-21T15:05:04Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-09-21T15:05:04Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-09-21T15:05:04Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-09-21T15:05:04Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC550+7EF2C550 CA00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:02.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:06.0 CB00 PCI2.10 PnP PMM 7EFCC550 7EF2C550 CB00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:06.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Booting from ROM...
vm-test-run-update-hardware-configuration> target # Probing EDD (edd=off to disable)... ok[    0.000000] Linux version 6.18.52 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Mon Sep 14 11:36:19 UTC 2026
vm-test-run-update-hardware-configuration> target # [    0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/nzvg05gsj9z9wgzk0912dww5v6ah4pzh-nixos-system-target-test/init regInfo=/nix/store/0jhf0vwrn0aw3glaf6rdk83y4ngvlcws-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-provided physical RAM map:
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd4fff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000007ffd5000-0x000000007fffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013e7fffff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] NX (Execute Disable) protection: active
vm-test-run-update-hardware-configuration> target # [    0.000000] APIC: Static calls initialized
vm-test-run-update-hardware-configuration> target # [    0.000000] SMBIOS 2.8 present.
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: Memory slots populated: 1/1
vm-test-run-update-hardware-configuration> target # [    0.000000] Hypervisor detected: KVM
vm-test-run-update-hardware-configuration> target # [    0.000000] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
vm-test-run-update-hardware-configuration> target # [    0.000002] kvm-clock: using sched offset of 469754519 cycles
vm-test-run-update-hardware-configuration> target # [    0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
vm-test-run-update-hardware-configuration> target # [    0.000010] tsc: Detected 4192.120 MHz processor
vm-test-run-update-hardware-configuration> target # [    0.000782] last_pfn = 0x13e800 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000830] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
vm-test-run-update-hardware-configuration> target # [    0.000835] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
vm-test-run-update-hardware-configuration> target # [    0.000904] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.002754] found SMP MP-table at [mem 0x000f5450-0x000f545f]
vm-test-run-update-hardware-configuration> target # [    0.002803] Using GB pages for direct mapping
vm-test-run-update-hardware-configuration> target # [    0.002919] RAMDISK: [mem 0x7e36e000-0x7ffcffff]
vm-test-run-update-hardware-configuration> target # [    0.002930] ACPI: Early table checksum verification disabled
vm-test-run-update-hardware-configuration> target # [    0.002935] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS )
vm-test-run-update-hardware-configuration> target # [    0.002940] ACPI: RSDT 0x000000007FFE2433 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002946] ACPI: FACP 0x000000007FFE222B 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002956] ACPI: DSDT 0x000000007FFE0040 0021EB (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002958] ACPI: FACS 0x000000007FFE0000 000040
vm-test-run-update-hardware-configuration> target # [    0.002960] ACPI: APIC 0x000000007FFE231F 000078 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002962] ACPI: HPET 0x000000007FFE2397 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002964] ACPI: MCFG 0x000000007FFE23CF 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002966] ACPI: WAET 0x000000007FFE240B 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002967] ACPI: Reserving FACP table memory at [mem 0x7ffe222b-0x7ffe231e]
vm-test-run-update-hardware-configuration> target # [    0.002968] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe222a]
vm-test-run-update-hardware-configuration> target # [    0.002969] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
vm-test-run-update-hardware-configuration> target # [    0.002970] ACPI: Reserving APIC table memory at [mem 0x7ffe231f-0x7ffe2396]
vm-test-run-update-hardware-configuration> target # [    0.002971] ACPI: Reserving HPET table memory at [mem 0x7ffe2397-0x7ffe23ce]
vm-test-run-update-hardware-configuration> target # [    0.002972] ACPI: Reserving MCFG table memory at [mem 0x7ffe23cf-0x7ffe240a]
vm-test-run-update-hardware-configuration> target # [    0.002972] ACPI: Reserving WAET table memory at [mem 0x7ffe240b-0x7ffe2432]
vm-test-run-update-hardware-configuration> target # [    0.003446] No NUMA configuration found
vm-test-run-update-hardware-configuration> target # [    0.003448] Faking a node at [mem 0x0000000000000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003451] NODE_DATA(0) allocated [mem 0x13e7fa780-0x13e7ffcff]
vm-test-run-update-hardware-configuration> target # [    0.003572] Zone ranges:
vm-test-run-update-hardware-configuration> target # [    0.003573]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
vm-test-run-update-hardware-configuration> target # [    0.003575]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
vm-test-run-update-hardware-configuration> target # [    0.003576]   Normal   [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003577]   Device   empty
vm-test-run-update-hardware-configuration> target # [    0.003579] Movable zone start for each node
vm-test-run-update-hardware-configuration> target # [    0.003580] Early memory node ranges
vm-test-run-update-hardware-configuration> target # [    0.003580]   node   0: [mem 0x0000000000001000-0x000000000009efff]
vm-test-run-update-hardware-configuration> target # [    0.003582]   node   0: [mem 0x0000000000100000-0x000000007ffd4fff]
vm-test-run-update-hardware-configuration> target # [    0.003583]   node   0: [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003584] Initmem setup node 0 [mem 0x0000000000001000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003607] On node 0, zone DMA: 1 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.003865] On node 0, zone DMA: 97 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.050260] On node 0, zone Normal: 43 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.050600] On node 0, zone Normal: 6144 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.051500] ACPI: PM-Timer IO Port: 0x608
vm-test-run-update-hardware-configuration> target # [    0.051518] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
vm-test-run-update-hardware-configuration> target # [    0.051544] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
vm-test-run-update-hardware-configuration> target # [    0.051547] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
vm-test-run-update-hardware-configuration> target # [    0.051549] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
vm-test-run-update-hardware-configuration> target # [    0.051551] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
vm-test-run-update-hardware-configuration> target # [    0.051552] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
vm-test-run-update-hardware-configuration> target # [    0.051553] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
vm-test-run-update-hardware-configuration> target # [    0.051556] ACPI: Using ACPI (MADT) for SMP configuration information
vm-test-run-update-hardware-configuration> target # [    0.051557] ACPI: HPET id: 0x8086a201 base: 0xfed00000
vm-test-run-update-hardware-configuration> target # [    0.051564] TSC deadline timer available
vm-test-run-update-hardware-configuration> target # [    0.051580] CPU topo: Max. logical packages:   1
vm-test-run-update-hardware-configuration> target # [    0.051580] CPU topo: Max. logical dies:       1
vm-test-run-update-hardware-configuration> target # [    0.051580] CPU topo: Max. dies per package:   1
vm-test-run-update-hardware-configuration> target # [    0.051596] CPU topo: Max. threads per core:   1
vm-test-run-update-hardware-configuration> target # [    0.051596] CPU topo: Num. cores per package:     1
vm-test-run-update-hardware-configuration> target # [    0.051597] CPU topo: Num. threads per package:   1
vm-test-run-update-hardware-configuration> target # [    0.051597] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs
vm-test-run-update-hardware-configuration> target # [    0.051621] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
vm-test-run-update-hardware-configuration> target # [    0.051654] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
vm-test-run-update-hardware-configuration> target # [    0.051656] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
vm-test-run-update-hardware-configuration> target # [    0.051657] PM: hibernation: Registered nosave memory: [mem 0x7ffd5000-0xffffffff]
vm-test-run-update-hardware-configuration> target # [    0.051660] [mem 0xc0000000-0xfed1bfff] available for PCI devices
vm-test-run-update-hardware-configuration> target # [    0.051661] Booting paravirtualized kernel on KVM
vm-test-run-update-hardware-configuration> target # [    0.051666] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
vm-test-run-update-hardware-configuration> target # [    0.055307] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
vm-test-run-update-hardware-configuration> target # [    0.057498] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152
vm-test-run-update-hardware-configuration> target # [    0.057552] kvm-guest: PV spinlocks disabled, single CPU
vm-test-run-update-hardware-configuration> target # [    0.057554] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/nzvg05gsj9z9wgzk0912dww5v6ah4pzh-nixos-system-target-test/init regInfo=/nix/store/0jhf0vwrn0aw3glaf6rdk83y4ngvlcws-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.057658] Unknown kernel command line parameters "regInfo=/nix/store/0jhf0vwrn0aw3glaf6rdk83y4ngvlcws-closure-info/registration", will be passed to user space.
vm-test-run-update-hardware-configuration> target # [    0.057853] random: crng init done
vm-test-run-update-hardware-configuration> target # [    0.057854] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
vm-test-run-update-hardware-configuration> target # [    0.061628] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.063394] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.063437] software IO TLB: area num 1.
vm-test-run-update-hardware-configuration> target # [    0.131125] Fallback order for Node 0: 0
vm-test-run-update-hardware-configuration> target # [    0.131136] Built 1 zonelists, mobility grouping on.  Total pages: 780147
vm-test-run-update-hardware-configuration> target # [    0.131138] Policy zone: Normal
vm-test-run-update-hardware-configuration> target # [    0.133434] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
vm-test-run-update-hardware-configuration> target # [    0.139788] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
vm-test-run-update-hardware-configuration> target # [    0.145444] allocated 6291456 bytes of page_ext
vm-test-run-update-hardware-configuration> target # [    0.156455] ftrace: allocating 48787 entries in 192 pages
vm-test-run-update-hardware-configuration> target # [    0.156458] ftrace: allocated 192 pages with 2 groups
vm-test-run-update-hardware-configuration> target # [    0.157382] Dynamic Preempt: lazy
vm-test-run-update-hardware-configuration> target # [    0.157557] rcu: Preemptible hierarchical RCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.157557] rcu: 	RCU event tracing is enabled.
vm-test-run-update-hardware-configuration> target # [    0.157558] rcu: 	RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.157560] 	Trampoline variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.157561] 	Rude variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.157561] 	Tracing variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.157562] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
vm-test-run-update-hardware-configuration> target # [    0.157562] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
vm-test-run-update-hardware-configuration> target # [    0.157626] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.157628] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.157629] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.161429] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16
vm-test-run-update-hardware-configuration> target # [    0.161701] rcu: srcu_init: Setting srcu_struct sizes based on contention.
vm-test-run-update-hardware-configuration> target # [    0.161707] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
vm-test-run-update-hardware-configuration> target # [    0.161879] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
vm-test-run-update-hardware-configuration> target # [    0.167472] Console: colour VGA+ 80x25
vm-test-run-update-hardware-configuration> target # [    0.167476] printk: legacy console [tty0] enabled
vm-test-run-update-hardware-configuration> target # [    0.205174] printk: legacy console [ttyS0] enabled
vm-test-run-update-hardware-configuration> target # [    0.369826] ACPI: Core revision 20250807
vm-test-run-update-hardware-configuration> target # [    0.371125] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
vm-test-run-update-hardware-configuration> target # [    0.373469] APIC: Switch to symmetric I/O mode setup
vm-test-run-update-hardware-configuration> target # [    0.374945] x2apic enabled
vm-test-run-update-hardware-configuration> target # [    0.375893] APIC: Switched APIC routing to: physical x2apic
vm-test-run-update-hardware-configuration> target # [    0.378451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
vm-test-run-update-hardware-configuration> target # [    0.379862] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d4d0b6d3, max_idle_ns: 440795255641 ns
vm-test-run-update-hardware-configuration> target # [    0.382300] Calibrating delay loop (skipped) preset value.. 8384.24 BogoMIPS (lpj=4192120)
vm-test-run-update-hardware-configuration> target # [    0.383448] x86/cpu: User Mode Instruction Prevention (UMIP) activated
vm-test-run-update-hardware-configuration> target # [    0.384501] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
vm-test-run-update-hardware-configuration> target # [    0.386292] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
vm-test-run-update-hardware-configuration> target # [    0.386307] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
vm-test-run-update-hardware-configuration> target # [    0.388303] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
vm-test-run-update-hardware-configuration> target # [    0.390298] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
vm-test-run-update-hardware-configuration> target # [    0.392300] Speculative Return Stack Overflow: Mitigation: Safe RET
vm-test-run-update-hardware-configuration> target # [    0.393297] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
vm-test-run-update-hardware-configuration> target # [    0.394316] Spectre V2 : Enabling IBPB for BPF
vm-test-run-update-hardware-configuration> target # [    0.395297] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
vm-test-run-update-hardware-configuration> target # [    0.396303] active return thunk: srso_alias_return_thunk
vm-test-run-update-hardware-configuration> target # [    0.398324] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
vm-test-run-update-hardware-configuration> target # [    0.399299] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
vm-test-run-update-hardware-configuration> target # [    0.400297] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
vm-test-run-update-hardware-configuration> target # [    0.401297] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
vm-test-run-update-hardware-configuration> target # [    0.402296] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
vm-test-run-update-hardware-configuration> target # [    0.403298] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
vm-test-run-update-hardware-configuration> target # [    0.404299] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
vm-test-run-update-hardware-configuration> target # [    0.405296] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
vm-test-run-update-hardware-configuration> target # [    0.406298] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
vm-test-run-update-hardware-configuration> target # [    0.408298] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
vm-test-run-update-hardware-configuration> target # [    0.409295] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
vm-test-run-update-hardware-configuration> target # [    0.410296] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
vm-test-run-update-hardware-configuration> target # [    0.411298] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
vm-test-run-update-hardware-configuration> target # [    0.412295] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
vm-test-run-update-hardware-configuration> target # [    0.414295] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16
vm-test-run-update-hardware-configuration> target # [    0.415295] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]:   24
vm-test-run-update-hardware-configuration> target # [    0.417295] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.
vm-test-run-update-hardware-configuration> target # [    0.457911] Freeing SMP alternatives memory: 44K
vm-test-run-update-hardware-configuration> target # [    0.458304] pid_max: default: 32768 minimum: 301
vm-test-run-update-hardware-configuration> target # [    0.460376] LSM: initializing lsm=capability,landlock,yama,bpf,ima
vm-test-run-update-hardware-configuration> target # [    0.461465] landlock: Up and running.
vm-test-run-update-hardware-configuration> target # [    0.462295] Yama: becoming mindful.
vm-test-run-update-hardware-configuration> target # [    0.464304] LSM support for eBPF active
vm-test-run-update-hardware-configuration> target # [    0.465408] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.466371] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.468953] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2)
vm-test-run-update-hardware-configuration> target # [    0.469871] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
vm-test-run-update-hardware-configuration> target # [    0.470300] ... version:                   2
vm-test-run-update-hardware-configuration> target # [    0.471264] ... bit width:                 48
vm-test-run-update-hardware-configuration> target # [    0.472066] ... generic counters:          6
vm-test-run-update-hardware-configuration> target # [    0.472320] ... generic bitmap:            000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.473297] ... fixed-purpose counters:    0
vm-test-run-update-hardware-configuration> target # [    0.474267] ... fixed-purpose bitmap:      0000000000000000
vm-test-run-update-hardware-configuration> target # [    0.475256] ... value mask:                0000ffffffffffff
vm-test-run-update-hardware-configuration> target # [    0.476258] ... max period:                00007fffffffffff
vm-test-run-update-hardware-configuration> target # [    0.477296] ... global_ctrl mask:          000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.478469] signal: max sigframe size: 3376
vm-test-run-update-hardware-configuration> target # [    0.479437] rcu: Hierarchical SRCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.480304] rcu: 	Max phase no-delay instances is 400.
vm-test-run-update-hardware-configuration> target # [    0.485211] smp: Bringing up secondary CPUs ...
vm-test-run-update-hardware-configuration> target # [    0.486121] smp: Brought up 1 node, 1 CPU
vm-test-run-update-hardware-configuration> target # [    0.487047] smpboot: Total of 1 processors activated (8384.24 BogoMIPS)
vm-test-run-update-hardware-configuration> target # [    0.488573] Memory: 2907668K/3120588K available (17247K kernel code, 2727K rwdata, 13616K rodata, 3652K init, 2976K bss, 201252K reserved, 0K cma-reserved)
vm-test-run-update-hardware-configuration> target # [    0.489780] devtmpfs: initialized
vm-test-run-update-hardware-configuration> target # [    0.490553] x86/mm: Memory block size: 128MB
vm-test-run-update-hardware-configuration> target # [    0.492795] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.493344] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).
vm-test-run-update-hardware-configuration> target # [    0.494483] pinctrl core: initialized pinctrl subsystem
vm-test-run-update-hardware-configuration> target # [    0.495711] PM: RTC time: 15:05:05, date: 2026-09-21
vm-test-run-update-hardware-configuration> target # [    0.499193] NET: Registered PF_NETLINK/PF_ROUTE protocol family
vm-test-run-update-hardware-configuration> target # [    0.501149] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.502362] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.503865] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.504334] audit: initializing netlink subsys (disabled)
vm-test-run-update-hardware-configuration> target # [    0.505782] thermal_sys: Registered thermal governor 'fair_share'
vm-test-run-update-hardware-configuration> target # [    0.505786] thermal_sys: Registered thermal governor 'bang_bang'
vm-test-run-update-hardware-configuration> target # [    0.506304] audit: type=2000 audit(1790003105.739:1): state=initialized audit_enabled=0 res=1
vm-test-run-update-hardware-configuration> target # [    0.508302] thermal_sys: Registered thermal governor 'step_wise'
vm-test-run-update-hardware-configuration> target # [    0.508305] thermal_sys: Registered thermal governor 'user_space'
vm-test-run-update-hardware-configuration> target # [    0.509297] thermal_sys: Registered thermal governor 'power_allocator'
vm-test-run-update-hardware-configuration> target # [    0.510345] cpuidle: using governor menu
vm-test-run-update-hardware-configuration> target # [    0.513313] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vm-test-run-update-hardware-configuration> target # [    0.514686] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.515302] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
vm-test-run-update-hardware-configuration> target # [    0.516333] PCI: Using configuration type 1 for base access
vm-test-run-update-hardware-configuration> target # [    0.517709] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
vm-test-run-update-hardware-configuration> target # [    0.524486] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.525297] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
vm-test-run-update-hardware-configuration> target # [    0.530301] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.531299] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
vm-test-run-update-hardware-configuration> target # [    0.542205] ACPI: Added _OSI(Module Device)
vm-test-run-update-hardware-configuration> target # [    0.543152] ACPI: Added _OSI(Processor Device)
vm-test-run-update-hardware-configuration> target # [    0.544232] ACPI: Added _OSI(Processor Aggregator Device)
vm-test-run-update-hardware-configuration> target # [    0.553858] ACPI: 1 ACPI AML tables successfully acquired and loaded
vm-test-run-update-hardware-configuration> target # [    0.557894] ACPI: Interpreter enabled
vm-test-run-update-hardware-configuration> target # [    0.558319] ACPI: PM: (supports S0 S3 S4 S5)
vm-test-run-update-hardware-configuration> target # [    0.559265] ACPI: Using IOAPIC for interrupt routing
vm-test-run-update-hardware-configuration> target # [    0.560214] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
vm-test-run-update-hardware-configuration> target # [    0.565260] PCI: Using E820 reservations for host bridge windows
vm-test-run-update-hardware-configuration> target # [    0.566509] ACPI: Enabled 2 GPEs in block 00 to 3F
vm-test-run-update-hardware-configuration> target # [    0.571668] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
vm-test-run-update-hardware-configuration> target # [    0.572307] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
vm-test-run-update-hardware-configuration> target # [    0.573389] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]
vm-test-run-update-hardware-configuration> target # [    0.574509] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
vm-test-run-update-hardware-configuration> target # [    0.575921] PCI host bridge to bus 0000:00
vm-test-run-update-hardware-configuration> target # [    0.576305] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.577312] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.578298] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.579350] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.580299] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.581298] pci_bus 0000:00: root bus resource [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.582299] pci_bus 0000:00: root bus resource [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.583533] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.585235] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.588402] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
vm-test-run-update-hardware-configuration> target # [    0.589323] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
vm-test-run-update-hardware-configuration> target # [    0.590345] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
vm-test-run-update-hardware-configuration> target # [    0.591580] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
vm-test-run-update-hardware-configuration> target # [    0.593689] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.596313] pci 0000:00:02.0: BAR 0 [io  0xc180-0xc19f]
vm-test-run-update-hardware-configuration> target # [    0.597312] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
vm-test-run-update-hardware-configuration> target # [    0.598347] pci 0000:00:02.0: BAR 4 [mem 0xe0000000000-0xe0000003fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.599313] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]
vm-test-run-update-hardware-configuration> target # [    0.601531] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.604310] pci 0000:00:03.0: BAR 0 [io  0xc1a0-0xc1bf]
vm-test-run-update-hardware-configuration> target # [    0.605313] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
vm-test-run-update-hardware-configuration> target # [    0.606355] pci 0000:00:03.0: BAR 4 [mem 0xe0000004000-0xe0000007fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.608603] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.611315] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
vm-test-run-update-hardware-configuration> target # [    0.612328] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
vm-test-run-update-hardware-configuration> target # [    0.613349] pci 0000:00:04.0: BAR 4 [mem 0xe0000008000-0xe000000bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.615521] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.619310] pci 0000:00:05.0: BAR 0 [io  0xc080-0xc0ff]
vm-test-run-update-hardware-configuration> target # [    0.620312] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]
vm-test-run-update-hardware-configuration> target # [    0.621340] pci 0000:00:05.0: BAR 4 [mem 0xe000000c000-0xe000000ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.623401] pci 0000:00:06.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.626323] pci 0000:00:06.0: BAR 0 [io  0xc1c0-0xc1df]
vm-test-run-update-hardware-configuration> target # [    0.627310] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]
vm-test-run-update-hardware-configuration> target # [    0.628338] pci 0000:00:06.0: BAR 4 [mem 0xe0000010000-0xe0000013fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.629311] pci 0000:00:06.0: ROM [mem 0xfeb80000-0xfebbffff pref]
vm-test-run-update-hardware-configuration> target # [    0.631452] pci 0000:00:07.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.634320] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]
vm-test-run-update-hardware-configuration> target # [    0.635347] pci 0000:00:07.0: BAR 4 [mem 0xe0000014000-0xe0000017fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.637467] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.639331] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]
vm-test-run-update-hardware-configuration> target # [    0.640345] pci 0000:00:08.0: BAR 4 [mem 0xe0000018000-0xe000001bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.642668] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.644319] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]
vm-test-run-update-hardware-configuration> target # [    0.645338] pci 0000:00:09.0: BAR 4 [mem 0xe000001c000-0xe000001ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.648408] pci 0000:00:0a.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.651321] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]
vm-test-run-update-hardware-configuration> target # [    0.652344] pci 0000:00:0a.0: BAR 4 [mem 0xe0000020000-0xe0000023fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.654445] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.657321] pci 0000:00:0b.0: BAR 0 [io  0xc100-0xc13f]
vm-test-run-update-hardware-configuration> target # [    0.658310] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]
vm-test-run-update-hardware-configuration> target # [    0.659369] pci 0000:00:0b.0: BAR 4 [mem 0xe0000024000-0xe0000027fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.661547] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.664150] pci 0000:00:0c.0: BAR 0 [io  0xc1e0-0xc1ff]
vm-test-run-update-hardware-configuration> target # [    0.665267] pci 0000:00:0c.0: BAR 1 [mem 0xfebdb000-0xfebdbfff]
vm-test-run-update-hardware-configuration> target # [    0.666348] pci 0000:00:0c.0: BAR 4 [mem 0xe0000028000-0xe000002bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.668339] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.670358] pci 0000:00:1d.0: BAR 4 [io  0xc200-0xc21f]
vm-test-run-update-hardware-configuration> target # [    0.671691] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.673363] pci 0000:00:1d.1: BAR 4 [io  0xc220-0xc23f]
vm-test-run-update-hardware-configuration> target # [    0.674656] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.676364] pci 0000:00:1d.2: BAR 4 [io  0xc240-0xc25f]
vm-test-run-update-hardware-configuration> target # [    0.677731] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.679241] pci 0000:00:1d.7: BAR 0 [mem 0xfebdc000-0xfebdcfff]
vm-test-run-update-hardware-configuration> target # [    0.680756] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.681963] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
vm-test-run-update-hardware-configuration> target # [    0.684020] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.686368] pci 0000:00:1f.2: BAR 4 [io  0xc260-0xc27f]
vm-test-run-update-hardware-configuration> target # [    0.687310] pci 0000:00:1f.2: BAR 5 [mem 0xfebdd000-0xfebddfff]
vm-test-run-update-hardware-configuration> target # [    0.688874] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.690308] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
vm-test-run-update-hardware-configuration> target # [    0.696771] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.697442] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.698439] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.699429] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.700442] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.701449] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.702448] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.703448] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.704366] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.705322] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.706319] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.707352] ACPI: PCI: Interrupt link GSID configured for IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.708333] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
vm-test-run-update-hardware-configuration> target # [    0.709320] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
vm-test-run-update-hardware-configuration> target # [    0.710315] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
vm-test-run-update-hardware-configuration> target # [    0.711328] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
vm-test-run-update-hardware-configuration> target # [    0.713708] iommu: Default domain type: Translated
vm-test-run-update-hardware-configuration> target # [    0.714308] iommu: DMA domain TLB invalidation policy: lazy mode
vm-test-run-update-hardware-configuration> target # [    0.715636] ACPI: bus type USB registered
vm-test-run-update-hardware-configuration> target # [    0.716379] usbcore: registered new interface driver usbfs
vm-test-run-update-hardware-configuration> target # [    0.717322] usbcore: registered new interface driver hub
vm-test-run-update-hardware-configuration> target # [    0.718314] usbcore: registered new device driver usb
vm-test-run-update-hardware-configuration> target # [    0.720456] NetLabel: Initializing
vm-test-run-update-hardware-configuration> target # [    0.721297] NetLabel:  domain hash size = 128
vm-test-run-update-hardware-configuration> target # [    0.722297] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
vm-test-run-update-hardware-configuration> target # [    0.723352] NetLabel:  unlabeled traffic allowed by default
vm-test-run-update-hardware-configuration> target # [    0.724313] PCI: Using ACPI for IRQ routing
vm-test-run-update-hardware-configuration> target # [    0.815542] pci 0000:00:01.0: vgaarb: setting as boot VGA device
vm-test-run-update-hardware-configuration> target # [    0.816292] pci 0000:00:01.0: vgaarb: bridge control possible
vm-test-run-update-hardware-configuration> target # [    0.816292] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vm-test-run-update-hardware-configuration> target # [    0.816318] vgaarb: loaded
vm-test-run-update-hardware-configuration> target # [    0.817439] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
vm-test-run-update-hardware-configuration> target # [    0.818297] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
vm-test-run-update-hardware-configuration> target # [    0.822470] clocksource: Switched to clocksource kvm-clock
vm-test-run-update-hardware-configuration> target # [    0.827554] VFS: Disk quotas dquot_6.6.0
vm-test-run-update-hardware-configuration> target # [    0.828693] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
vm-test-run-update-hardware-configuration> target # [    0.830936] pnp: PnP ACPI init
vm-test-run-update-hardware-configuration> target # [    0.832219] ACPI: IRQ 4 override to edge(!), high(!)
vm-test-run-update-hardware-configuration> target # [    0.833727] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
vm-test-run-update-hardware-configuration> target # [    0.836000] pnp: PnP ACPI: found 5 devices
vm-test-run-update-hardware-configuration> target # [    0.844669] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
vm-test-run-update-hardware-configuration> target # [    0.846862] clocksource: Switched to clocksource acpi_pm
vm-test-run-update-hardware-configuration> target # [    0.848446] NET: Registered PF_INET protocol family
vm-test-run-update-hardware-configuration> target # [    0.850139] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.872929] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.875533] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.877721] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.879862] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.881776] TCP: Hash tables configured (established 32768 bind 32768)
vm-test-run-update-hardware-configuration> target # [    0.883675] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.885867] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.887715] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.889727] NET: Registered PF_UNIX/PF_LOCAL protocol family
vm-test-run-update-hardware-configuration> target # [    0.891248] NET: Registered PF_XDP protocol family
vm-test-run-update-hardware-configuration> target # [    0.892624] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.894251] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.895755] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.897322] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.899028] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.900627] pci_bus 0000:00: resource 9 [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.903130] ACPI: \_SB_.GSIA: Enabled at IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.905833] ACPI: \_SB_.GSIB: Enabled at IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.908253] ACPI: \_SB_.GSIC: Enabled at IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.910697] ACPI: \_SB_.GSID: Enabled at IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.913050] PCI: CLS 0 bytes, default 64
vm-test-run-update-hardware-configuration> target # [    0.914231] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
vm-test-run-update-hardware-configuration> target # [    0.916016] Trying to unpack rootfs image as initramfs...
vm-test-run-update-hardware-configuration> target # [    0.923634] software IO TLB: mapped [mem 0x000000007a36e000-0x000000007e36e000] (64MB)
vm-test-run-update-hardware-configuration> target # [    0.929764] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d4d0b6d3, max_idle_ns: 440795255641 ns
vm-test-run-update-hardware-configuration> target # [    0.973085] Initialise system trusted keyrings
vm-test-run-update-hardware-configuration> target # [    0.974454] workingset: timestamp_bits=40 max_order=20 bucket_order=0
vm-test-run-update-hardware-configuration> target # [    0.995690] Key type asymmetric registered
vm-test-run-update-hardware-configuration> target # [    0.998639] Asymmetric key parser 'x509' registered
vm-test-run-update-hardware-configuration> target # [    0.999940] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
vm-test-run-update-hardware-configuration> target # [    1.005852] io scheduler mq-deadline registered
vm-test-run-update-hardware-configuration> target # [    1.010636] io scheduler kyber registered
vm-test-run-update-hardware-configuration> target # [    1.014883] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
vm-test-run-update-hardware-configuration> target # [    1.016983] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
vm-test-run-update-hardware-configuration> target # [    1.025058] Linux agpgart interface v0.103
vm-test-run-update-hardware-configuration> target # [    1.026332] ACPI: bus type drm_connector registered
vm-test-run-update-hardware-configuration> target # [    1.031290] usbcore: registered new interface driver usbserial_generic
vm-test-run-update-hardware-configuration> target # [    1.032860] usbserial: USB Serial support registered for generic
vm-test-run-update-hardware-configuration> target # [    1.037655] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.
vm-test-run-update-hardware-configuration> target # [    1.037655] Please enable it if your BIOS has the CPPC option.
vm-test-run-update-hardware-configuration> target # [    1.040578] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
vm-test-run-update-hardware-configuration> target # [    1.045770] drop_monitor: Initializing network drop monitor service
vm-test-run-update-hardware-configuration> target # [    1.047531] NET: Registered PF_INET6 protocol family
vm-test-run-update-hardware-configuration> target # [    1.051168] Segment Routing with IPv6
vm-test-run-update-hardware-configuration> target # [    1.054665] In-situ OAM (IOAM) with IPv6
vm-test-run-update-hardware-configuration> target # [    1.056164] IPI shorthand broadcast: enabled
vm-test-run-update-hardware-configuration> target # [    1.064535] sched_clock: Marking stable (848023227, 215585851)->(1234266088, -170657010)
vm-test-run-update-hardware-configuration> target # [    1.069972] registered taskstats version 1
vm-test-run-update-hardware-configuration> target # [    1.071372] Loading compiled-in X.509 certificates
vm-test-run-update-hardware-configuration> target # [    1.090664] Demotion targets for Node 0: null
vm-test-run-update-hardware-configuration> target # [    1.093689] Key type .fscrypt registered
vm-test-run-update-hardware-configuration> target # [    1.094856] Key type fscrypt-provisioning registered
vm-test-run-update-hardware-configuration> target # [    1.098787] ima: No TPM chip found, activating TPM-bypass!
vm-test-run-update-hardware-configuration> target # [    1.100165] ima: Allocated hash algorithm: sha1
vm-test-run-update-hardware-configuration> target # [    1.104665] ima: No architecture policies found
vm-test-run-update-hardware-configuration> target # [    1.107648] PM:   Magic number: 10:700:83
vm-test-run-update-hardware-configuration> target # [    1.111441] RAS: Correctable Errors collector initialized.
vm-test-run-update-hardware-configuration> target # [    1.119904] clk: Disabling unused clocks
vm-test-run-update-hardware-configuration> target # [    1.124635] PM: genpd: Disabling unused power domains
vm-test-run-update-hardware-configuration> target # [    1.296378] Freeing initrd memory: 29064K
vm-test-run-update-hardware-configuration> target # [    1.300750] Freeing unused decrypted memory: 2028K
vm-test-run-update-hardware-configuration> target # [    1.304697] Freeing unused kernel image (initmem) memory: 3652K
vm-test-run-update-hardware-configuration> target # [    1.309770] Write protecting the kernel read-only data: 32768k
vm-test-run-update-hardware-configuration> target # [    1.315336] Freeing unused kernel image (text/rodata gap) memory: 1184K
vm-test-run-update-hardware-configuration> target # [    1.317695] Freeing unused kernel image (rodata/data gap) memory: 720K
vm-test-run-update-hardware-configuration> target # [    1.360781] x86/mm: Checked W+X mappings: passed, no W+X pages found.
vm-test-run-update-hardware-configuration> target # [    1.362527] Run /init as init process
vm-test-run-update-hardware-configuration> target # [    1.376464] systemd[1]: Inserted module 'autofs4'
vm-test-run-update-hardware-configuration> target # [    1.398999] fuse: init (API version 7.45)
vm-test-run-update-hardware-configuration> target # [    1.408963] ACPI: \_SB_.GSIG: Enabled at IRQ 22
vm-test-run-update-hardware-configuration> target # [    1.412854] ACPI: \_SB_.GSIH: Enabled at IRQ 23
vm-test-run-update-hardware-configuration> target # [    1.417779] ACPI: \_SB_.GSIE: Enabled at IRQ 20
vm-test-run-update-hardware-configuration> target # [    1.425897] ACPI: \_SB_.GSIF: Enabled at IRQ 21
vm-test-run-update-hardware-configuration> target # [    1.439094] virtiofs virtio6: discovered new tag: nix-store
vm-test-run-update-hardware-configuration> target # [    1.442773] virtiofs virtio6: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.455009] virtiofs virtio7: discovered new tag: shared
vm-test-run-update-hardware-configuration> target # [    1.458042] virtiofs virtio7: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.482173] virtiofs virtio8: discovered new tag: xchg
vm-test-run-update-hardware-configuration> target # [    1.484842] virtiofs virtio8: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.532233] systemd[1]: Successfully made /usr/ read-only.
vm-test-run-update-hardware-configuration> target # [    1.868946] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    1.876339] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    1.877569] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    1.878848] systemd[1]: Running in initrd.
vm-test-run-update-hardware-configuration> target # [    1.880362] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    1.882158] systemd[1]: Hostname set to <target>.
vm-test-run-update-hardware-configuration> target # [    2.108517] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    2.158792] systemd[1]: Queued start job for default target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    2.164740] systemd[1]: Created slice Slice /system/modprobe.
vm-test-run-update-hardware-configuration> target # [    2.167009] systemd[1]: Created slice Slice /system/systemd-makefs.
vm-test-run-update-hardware-configuration> target # [    2.168761] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    2.170834] systemd[1]: Expecting device /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.172311] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    2.173775] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    2.175181] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    2.176465] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    2.178124] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    2.180017] systemd[1]: Listening on Journal Socket (/dev/log).
vm-test-run-update-hardware-configuration> target # [    2.181851] systemd[1]: Listening on Journal Sockets.
vm-test-run-update-hardware-configuration> target # [    2.183352] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    2.185015] systemd[1]: Listening on udev Kernel Socket.
vm-test-run-update-hardware-configuration> target # [    2.186518] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    2.189445] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    2.196714] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    2.208748] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    2.221736] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    2.227755] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    2.237946] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    2.260740] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    2.275157] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    2.280946] systemd-journald[66]: Collecting audit messages is disabled.
vm-test-run-update-hardware-configuration> target # [    2.285743] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    2.295495] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config
vm-test-run-update-hardware-configuration> target # [    2.302330] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
vm-test-run-update-hardware-configuration> target # [    2.312006] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    2.316651] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
vm-test-run-update-hardware-configuration> target # [    2.361785] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    2.373738] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    2.391818] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    2.408736] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    2.442819] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    2.470856] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    2.476942] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    2.482713] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    2.270819] systemd-modules-load[67]: Inserted module 'dm_mod'
vm-test-run-update-hardware-configuration> target # [    2.274739] systemd-modules-load[67]: Inserted module 'virtio_balloon'
vm-test-run-update-hardware-configuration> target # [    2.277588] systemd-modules-load[67]: Inserted module 'virtio_gpu'
vm-test-run-update-hardware-configuration> target # [    2.494458] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    2.502815] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    2.306890] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    2.345792] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    2.353321] systemd-udevd[75]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    2.380096] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    2.396745] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    2.398061] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    2.399248] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    2.889395] virtio_blk virtio2: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.913069] virtio_blk virtio2: [vda] 16777216 512-byte logical blocks (8.59 GB/8.00 GiB)
vm-test-run-update-hardware-configuration> target # [    2.926775] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
vm-test-run-update-hardware-configuration> target # [    2.959692] serio: i8042 KBD port at 0x60,0x64 irq 1
vm-test-run-update-hardware-configuration> target # [    2.971327] ehci-pci 0000:00:1d.7: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.972383] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
vm-test-run-update-hardware-configuration> target # [    2.976176] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdc000
vm-test-run-update-hardware-configuration> target # [    2.981848] virtio_blk virtio3: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.984641] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
vm-test-run-update-hardware-configuration> target # [    2.987632] serio: i8042 AUX port at 0x60,0x64 irq 12
vm-test-run-update-hardware-configuration> target # [    2.988914] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.990485] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.994988] usb usb1: Product: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.997045] usb usb1: Manufacturer: Linux 6.18.52 ehci_hcd
vm-test-run-update-hardware-configuration> target # [    3.001225] usb usb1: SerialNumber: 0000:00:1d.7
vm-test-run-update-hardware-configuration> target # [    3.002523] hub 1-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    3.004566] hub 1-0:1.0: 6 ports detected
vm-test-run-update-hardware-configuration> target # [    3.010196] virtio_blk virtio3: [vdb] 1048576 512-byte logical blocks (537 MB/512 MiB)
vm-test-run-update-hardware-configuration> target # [    3.017143] uhci_hcd 0000:00:1d.0: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.018227] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
vm-test-run-update-hardware-configuration> target # [    3.039125] uhci_hcd 0000:00:1d.0: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.836663] (udev-worker)[92]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    3.054466] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200
vm-test-run-update-hardware-configuration> target # [    2.852087] (udev-worker)[88]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    3.074991] SCSI subsystem initialized
vm-test-run-update-hardware-configuration> target # [    3.079338] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.871461] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    3.114022] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
vm-test-run-update-hardware-configuration> target # [    3.118619] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.916409] systemd-vconsole-setup[108]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [    2.920584] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    3.143822] usb usb2: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.153229] usb usb2: Manufacturer: Linux 6.18.52 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    3.154184] usb usb2: SerialNumber: 0000:00:1d.0
vm-test-run-update-hardware-configuration> target # [    2.944675] systemd[1]: Found device /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.946670] systemd[1]: Reached target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    2.950127] systemd[1]: Starting Make File System on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    3.167008] hub 2-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    3.174734] hub 2-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    3.185779] uhci_hcd 0000:00:1d.1: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.186725] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
vm-test-run-update-hardware-configuration> target # [    3.189668] uhci_hcd 0000:00:1d.1: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    3.193045] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220
vm-test-run-update-hardware-configuration> target # [    3.196971] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    3.200643] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    3.203639] usb usb3: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.991519] systemd-makefs[111]: Formatting /dev/vdb as ext4
vm-test-run-update-hardware-configuration> target # [    3.215735] usb usb3: Manufacturer: Linux 6.18.52 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    3.217108] usb usb3: SerialNumber: 0000:00:1d.1
vm-test-run-update-hardware-configuration> target # [    3.219948] hub 3-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    3.223935] hub 3-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    3.228839] uhci_hcd 0000:00:1d.2: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.229853] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
vm-test-run-update-hardware-configuration> target # [    3.232485] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
vm-test-run-update-hardware-configuration> target # [    3.234258] uhci_hcd 0000:00:1d.2: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    3.235926] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
vm-test-run-update-hardware-configuration> target # [    3.239203] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240
vm-test-run-update-hardware-configuration> target # [    3.241157] ahci 0000:00:1f.2: flags: 64bit ncq only
vm-test-run-update-hardware-configuration> target # [    3.243314] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    3.244913] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    3.249610] usb 1-1: new high-speed USB device number 2 using ehci-pci
vm-test-run-update-hardware-configuration> target # [    3.251327] scsi host0: ahci
vm-test-run-update-hardware-configuration> target # [    3.253912] scsi host1: ahci
vm-test-run-update-hardware-configuration> target # [    3.255125] usb usb4: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    3.257627] scsi host2: ahci
vm-test-run-update-hardware-configuration> target # [    3.259367] usb usb4: Manufacturer: Linux 6.18.52 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    3.260675] usb usb4: SerialNumber: 0000:00:1d.2
vm-test-run-update-hardware-configuration> target # [    3.261786] scsi host3: ahci
vm-test-run-update-hardware-configuration> target # [    3.263518] hub 4-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    3.265744] scsi host4: ahci
vm-test-run-update-hardware-configuration> target # [    3.267282] hub 4-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    3.269123] scsi host5: ahci
vm-test-run-update-hardware-configuration> target # [    3.272205] ata1: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd100 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.281384] ata2: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd180 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.070170] systemd-makefs[111]: /dev/vdb successfully formatted as ext4 (label "vdb", uuid b839b9a8-d291-4055-b587-99ad0a591e71)
vm-test-run-update-hardware-configuration> target # [    3.076300] systemd[1]: Finished Make File System on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    3.080181] systemd[1]: Starting File System Check on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    3.299721] ata3: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd200 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.310060] ata4: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd280 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.111245] systemd-fsck[131]: vdb: clean, 12/32768 files, 6385/131072 blocks
vm-test-run-update-hardware-configuration> target # [    3.331911] ata5: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd300 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.119200] systemd[1]: Finished File System Check on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    3.123426] systemd[1]: Mounting /sysroot...
vm-test-run-update-hardware-configuration> target # [    3.343841] ata6: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd380 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    3.381949] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
vm-test-run-update-hardware-configuration> target # [    3.383599] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
vm-test-run-update-hardware-configuration> target # [    3.386041] usb 1-1: Product: QEMU USB Tablet
vm-test-run-update-hardware-configuration> target # [    3.388490] usb 1-1: Manufacturer: QEMU
vm-test-run-update-hardware-configuration> target # [    3.389451] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1
vm-test-run-update-hardware-configuration> target # [    3.410493] hid: raw HID events driver (C) Jiri Kosina
vm-test-run-update-hardware-configuration> target # [    3.657955] ata4: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.659143] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.660786] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
vm-test-run-update-hardware-configuration> target # [    3.662013] ata3.00: applying bridge limits
vm-test-run-update-hardware-configuration> target # [    3.663085] ata6: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.664309] ata1: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.665733] ata5: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.667060] ata2: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.668537] ata3.00: configured for UDMA/100
vm-test-run-update-hardware-configuration> target # [    3.670030] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
vm-test-run-update-hardware-configuration> target # [    3.763818] usbcore: registered new interface driver usbhid
vm-test-run-update-hardware-configuration> target # [    3.772057] usbhid: USB HID core driver
vm-test-run-update-hardware-configuration> target # [    3.791427] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2
vm-test-run-update-hardware-configuration> target # [    3.796908] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
vm-test-run-update-hardware-configuration> target # [    3.802367] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
vm-test-run-update-hardware-configuration> target # [    3.820680] EXT4-fs (vdb): mounted filesystem b839b9a8-d291-4055-b587-99ad0a591e71 r/w with ordered data mode. Quota mode: none.
vm-test-run-update-hardware-configuration> target # [    3.613102] systemd[1]: Mounted /sysroot.
vm-test-run-update-hardware-configuration> target # [    3.615540] systemd[1]: Reached target Initrd Root File System.
vm-test-run-update-hardware-configuration> target # [    3.620096] systemd[1]: Starting Mountpoints Configured in the Real Root...
vm-test-run-update-hardware-configuration> target # [    3.857746] cdrom: Uniform CD-ROM driver Revision: 3.20
vm-test-run-update-hardware-configuration> target # [    3.645176] systemd-sysroot-fstab-check[151]: /sysroot should be mounted in the initrd, will request daemon-reload.
vm-test-run-update-hardware-configuration> target # [    3.648563] systemd[1]: Reload requested from client PID 151 ('systemd-sysroot') (unit initrd-parse-etc.service)...
vm-test-run-update-hardware-configuration> target # [    3.651177] systemd[1]: Reloading...
vm-test-run-update-hardware-configuration> target # [    3.757969] systemd[1]: Reloading finished in 105 ms.
vm-test-run-update-hardware-configuration> target # [    3.767413] systemd-sysroot-fstab-check[151]: Requesting initrd-fs.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    3.771207] systemd-sysroot-fstab-check[151]: Requesting swap.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    3.779940] systemd[1]: initrd-parse-etc.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.782183] systemd[1]: Finished Mountpoints Configured in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.783844] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.
vm-test-run-update-hardware-configuration> target # [    4.039424] systemd[1]: Mounting /sysroot/nix/.ro-store...
vm-test-run-update-hardware-configuration> target # [    4.045169] systemd[1]: Mounting /sysroot/nix/.rw-store...
vm-test-run-update-hardware-configuration> target # [    4.052142] systemd[1]: Mounting /sysroot/run...
vm-test-run-update-hardware-configuration> target # [    4.059279] systemd[1]: Mounting /sysroot/tmp/shared...
vm-test-run-update-hardware-configuration> target # [    4.067177] systemd[1]: Mounting /sysroot/tmp/xchg...
vm-test-run-update-hardware-configuration> target # [    4.099814] systemd[1]: Mounted /sysroot/nix/.rw-store.
vm-test-run-update-hardware-configuration> target # [    4.107088] systemd[1]: Mounted /sysroot/nix/.ro-store.
vm-test-run-update-hardware-configuration> target # [    4.109837] systemd[1]: Mounted /sysroot/run.
vm-test-run-update-hardware-configuration> target # [    4.119401] systemd[1]: Mounted /sysroot/tmp/shared.
vm-test-run-update-hardware-configuration> target # [    4.120949] systemd[1]: Mounted /sysroot/tmp/xchg.
vm-test-run-update-hardware-configuration> target # [    4.124948] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    4.140124] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.142584] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    4.145760] systemd[1]: Mounting /sysroot/nix/store...
vm-test-run-update-hardware-configuration> target # [    4.170550] systemd[1]: Mounted /sysroot/nix/store.
vm-test-run-update-hardware-configuration> target # [    4.171989] systemd[1]: Reached target Initrd File Systems.
vm-test-run-update-hardware-configuration> target # [    4.174827] systemd[1]: Starting Find NixOS closure...
vm-test-run-update-hardware-configuration> target # [    4.178153] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...
vm-test-run-update-hardware-configuration> target # [    4.197533] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    4.206670] systemd[1]: Finished Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    4.209875] systemd[1]: Reached target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    4.211430] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...
vm-test-run-update-hardware-configuration> target # [    4.229174] systemd[1]: Stopped target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    4.230889] systemd[1]: Stopped target Basic System.
vm-test-run-update-hardware-configuration> target # [    4.232405] systemd[1]: Stopped target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    4.234361] systemd[1]: Stopped target Path Units.
vm-test-run-update-hardware-configuration> target # [    4.235500] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.237355] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    4.239677] systemd[1]: Stopped target Slice Units.
vm-test-run-update-hardware-configuration> target # [    4.241193] systemd[1]: Stopped target Socket Units.
vm-test-run-update-hardware-configuration> target # [    4.242521] systemd[1]: Stopped target System Initialization.
vm-test-run-update-hardware-configuration> target # [    4.244213] systemd[1]: Stopped target Swaps.
vm-test-run-update-hardware-configuration> target # [    4.245453] systemd[1]: Stopped target Timer Units.
vm-test-run-update-hardware-configuration> target # [    4.247174] systemd[1]: dbus.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.248412] systemd[1]: Closed D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    4.249573] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.251155] systemd[1]: Stopped Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    4.252814] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    4.254182] systemd[1]: systemd-sysctl.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.256197] systemd[1]: Stopped Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    4.257693] systemd[1]: systemd-modules-load.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.260318] systemd[1]: Stopped Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    4.262245] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.264048] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    4.265701] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.268152] systemd[1]: Stopped Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    4.269942] systemd[1]: Stopped target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    4.271575] systemd[1]: Stopped target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    4.273625] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.276223] systemd[1]: Stopped Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    4.279183] systemd[1]: Stopping Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    4.280775] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.282909] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    4.295818] systemd[1]: initrd-cleanup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.301159] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.
vm-test-run-update-hardware-configuration> target # [    4.309163] systemd[1]: systemd-udevd.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.311255] systemd[1]: Stopped Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    4.313415] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.315605] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    4.317736] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.319684] systemd[1]: Closed udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    4.321812] systemd[1]: Starting Cleanup udev Database...
vm-test-run-update-hardware-configuration> target # [    4.323120] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.325308] systemd[1]: Stopped Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    4.327196] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.328823] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    4.331173] systemd[1]: kmod-static-nodes.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.332445] systemd[1]: Stopped Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    4.345725] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.348300] systemd[1]: Finished Cleanup udev Database.
vm-test-run-update-hardware-configuration> target # [    4.349641] systemd[1]: Reached target Switch Root.
vm-test-run-update-hardware-configuration> target # [    4.351538] systemd[1]: Starting NixOS Activation...
vm-test-run-update-hardware-configuration> target # [    4.416347] initrd-nixos-activation-start[203]: booting system configuration /nix/store/nzvg05gsj9z9wgzk0912dww5v6ah4pzh-nixos-system-target-test
vm-test-run-update-hardware-configuration> target # [    4.441783] initrd-nixos-activation-start[203]: running activation script...
vm-test-run-update-hardware-configuration> target # [    4.815415] initrd-nixos-activation-start[226]: setting up /etc...
vm-test-run-update-hardware-configuration> target # [    4.980488] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.982924] systemd[1]: Finished NixOS Activation.
vm-test-run-update-hardware-configuration> target # [    4.986449] systemd[1]: Starting Switch Root...
vm-test-run-update-hardware-configuration> target # [    5.003941] systemd[1]: Switching root.
vm-test-run-update-hardware-configuration> target # [    5.350959] systemd-journald[66]: Received SIGTERM from PID 1 (systemd).
vm-test-run-update-hardware-configuration> target: waiting for TCP port 22 on localhost
vm-test-run-update-hardware-configuration> target: waiting for the VM to finish booting
vm-test-run-update-hardware-configuration> target # [   11.828731] NET: Registered PF_VSOCK protocol family
vm-test-run-update-hardware-configuration> target # [   12.202653] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [   12.209353] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [   12.210310] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [   12.211364] systemd[1]: Detected first boot.
vm-test-run-update-hardware-configuration> target # [   12.213428] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [   12.437744] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [   12.515046] systemd[1]: Applying preset policy.
vm-test-run-update-hardware-configuration> target # [   12.709018] systemd[1]: Populated /etc with preset unit settings.
vm-test-run-update-hardware-configuration> target # [   12.958688] systemd[1]: initrd-switch-root.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   12.960791] systemd[1]: Stopped initrd-switch-root.service.
vm-test-run-update-hardware-configuration> target # [   12.964277] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
vm-test-run-update-hardware-configuration> target # [   12.967321] systemd[1]: Created slice Slice /system/getty.
vm-test-run-update-hardware-configuration> target # [   12.969267] systemd[1]: Created slice User and Session Slice.
vm-test-run-update-hardware-configuration> target # [   12.970765] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [   12.972631] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
vm-test-run-update-hardware-configuration> target # [   12.974282] systemd[1]: Expecting device /dev/hvc0...
vm-test-run-update-hardware-configuration> target # [   12.975437] systemd[1]: Expecting device /dev/ttyS0...
vm-test-run-update-hardware-configuration> target # [   12.976605] systemd[1]: Reached target Local Encrypted Volumes.
vm-test-run-update-hardware-configuration> target # [   12.977788] systemd[1]: Stopped target initrd-fs.target.
vm-test-run-update-hardware-configuration> target # [   12.978933] systemd[1]: Stopped target initrd-root-fs.target.
vm-test-run-update-hardware-configuration> target # [   12.980200] systemd[1]: Stopped target initrd-switch-root.target.
vm-test-run-update-hardware-configuration> target # [   12.981542] systemd[1]: Reached target Virtual Machines and Containers.
vm-test-run-update-hardware-configuration> target # [   12.982911] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [   12.983961] systemd[1]: Reached target Remote File Systems.
vm-test-run-update-hardware-configuration> target # [   12.985222] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [   12.986346] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [   12.989124] systemd[1]: Listening on Query the User Interactively for a Password.
vm-test-run-update-hardware-configuration> target # [   12.993191] systemd[1]: Listening on Process Core Dump Socket.
vm-test-run-update-hardware-configuration> target # [   12.995686] systemd[1]: Listening on Credential Encryption/Decryption.
vm-test-run-update-hardware-configuration> target # [   12.998298] systemd[1]: Listening on Factory Reset Management.
vm-test-run-update-hardware-configuration> target # [   12.999793] systemd[1]: Listening on Hostname Service Socket.
vm-test-run-update-hardware-configuration> target # [   13.004173] systemd[1]: Starting Journal Log Access Socket...
vm-test-run-update-hardware-configuration> target # [   13.006340] systemd[1]: Listening on Journal Audit Socket.
vm-test-run-update-hardware-configuration> target # [   13.010812] systemd[1]: Listening on Console Output Muting Service Socket.
vm-test-run-update-hardware-configuration> target # [   13.014490] systemd[1]: Listening on Network Management Metrics Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   13.016168] systemd[1]: Listening on Network Management Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   13.017674] systemd[1]: Listening on Network Management Netlink Socket.
vm-test-run-update-hardware-configuration> target # [   13.019097] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
vm-test-run-update-hardware-configuration> target # [   13.020670] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [   13.022325] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
vm-test-run-update-hardware-configuration> target # [   13.027012] systemd[1]: Listening on Disk Repartitioning Service Socket.
vm-test-run-update-hardware-configuration> target # [   13.028460] systemd[1]: Listening on Resolve Monitor Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   13.029853] systemd[1]: Listening on Resolve Service Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   13.031193] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [   13.032395] systemd[1]: Listening on udev Varlink Socket.
vm-test-run-update-hardware-configuration> target # [   13.035238] systemd[1]: Mounting Huge Pages File System...
vm-test-run-update-hardware-configuration> target # [   13.038852] systemd[1]: Mounting POSIX Message Queue File System...
vm-test-run-update-hardware-configuration> target # [   13.047673] systemd[1]: Mounting Kernel Debug File System...
vm-test-run-update-hardware-configuration> target # [   13.057214] systemd[1]: Mounting Kernel Trace File System...
vm-test-run-update-hardware-configuration> target # [   13.066068] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [   13.083890] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [   13.092806] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
vm-test-run-update-hardware-configuration> target # [   13.105456] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore
vm-test-run-update-hardware-configuration> target # [   13.113788] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [   13.131425] systemd[1]: Mounting FUSE Control File System...
vm-test-run-update-hardware-configuration> target # [   13.133828] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
vm-test-run-update-hardware-configuration> target # [   13.155370] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [   13.163025] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [   13.177331] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...
vm-test-run-update-hardware-configuration> target # [   13.202683] systemd[1]: Starting Remount Root and Kernel File Systems...
vm-test-run-update-hardware-configuration> target # [   13.209891] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [   13.225947] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [   13.228285] systemd-journald[296]: Collecting audit messages is enabled.
vm-test-run-update-hardware-configuration> target # [   13.245186] systemd[1]: Listening on Journal Log Access Socket.
vm-test-run-update-hardware-configuration> target # [   13.252073] systemd[1]: Mounted Huge Pages File System.
vm-test-run-update-hardware-configuration> target # [   13.269799] loop: module loaded
vm-test-run-update-hardware-configuration> target # [   13.271996] systemd[1]: Mounted POSIX Message Queue File System.
vm-test-run-update-hardware-configuration> target # [   13.284937] systemd[1]: Mounted Kernel Debug File System.
vm-test-run-update-hardware-configuration> target # [   13.290083] systemd[1]: Mounted Kernel Trace File System.
vm-test-run-update-hardware-configuration> target # [   13.077601] systemd[1]: Queued start job for default target Multi-User System.
vm-test-run-update-hardware-configuration> target # [   13.080584] systemd[1]: Unnecessary job was removed for /dev/vdb.
vm-test-run-update-hardware-configuration> target # [   13.297746] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [   13.084741] systemd[1]: systemd-journald.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   13.086925] systemd-modules-load[297]: Inserted module 'loop'
vm-test-run-update-hardware-configuration> target # [   13.096700] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [   13.098567] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   13.103587] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [   13.106551] systemd[1]: Mounted FUSE Control File System.
vm-test-run-update-hardware-configuration> target # [   13.113865] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [   13.334610] EXT4-fs (vdb): re-mounted b839b9a8-d291-4055-b587-99ad0a591e71.
vm-test-run-update-hardware-configuration> target # [   13.126319] systemd-oomd[298]: No swap; memory pressure usage will be degraded
vm-test-run-update-hardware-configuration> target # [   13.133685] systemd[1]: Finished Remount Root and Kernel File Systems.
vm-test-run-update-hardware-configuration> target # [   13.136970] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.
vm-test-run-update-hardware-configuration> target # [   13.146135] systemd[1]: Listening on Disk Image Download Service Socket.
vm-test-run-update-hardware-configuration> target # [   13.149889] systemd[1]: Mounting Kernel Configuration File System...
vm-test-run-update-hardware-configuration> target # [   13.156159] systemd[1]: Starting Firewall...
vm-test-run-update-hardware-configuration> target # [   13.167860] systemd[1]: Starting Flush Journal to Persistent Storage...
vm-test-run-update-hardware-configuration> target # [   13.169417] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore
vm-test-run-update-hardware-configuration> target # [   13.185113] systemd[1]: Starting Load/Save OS Random Seed...
vm-test-run-update-hardware-configuration> target # [   13.203192] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [   13.226410] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [   13.227956] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [   13.479866] systemd-journald[296]: Received client request to flush runtime journal.
vm-test-run-update-hardware-configuration> target # [   13.490953] systemd[1]: Mounted Kernel Configuration File System.
vm-test-run-update-hardware-configuration> target # [   13.494198] systemd[1]: Finished Load/Save OS Random Seed.
vm-test-run-update-hardware-configuration> target # [   13.496714] systemd[1]: Reached target First Boot Complete.
vm-test-run-update-hardware-configuration> target # [   13.501610] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [   13.505484] systemd[1]: Starting Network Name Resolution...
vm-test-run-update-hardware-configuration> target # [   13.509341] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [   13.513274] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [   13.518318] systemd[1]: Finished Flush Journal to Persistent Storage.
vm-test-run-update-hardware-configuration> target # [   13.555330] systemd-resolved[325]: Positive Trust Anchors:
vm-test-run-update-hardware-configuration> target # [   13.558381] systemd-resolved[325]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
vm-test-run-update-hardware-configuration> target # [   13.561454] systemd-resolved[325]: . IN DS 38696 8 2 683d2d0acb8c9b712a1948b27f741219298d0a450d612c483af444a4c0fb2b16
vm-test-run-update-hardware-configuration> target # [   13.565844] systemd-resolved[325]: Negative trust anchors: home.arpa 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 170.0.0.192.in-addr.arpa 171.0.0.192.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa ipv4only.arpa resolver.arpa corp home internal intranet lan local private test
vm-test-run-update-hardware-configuration> target # [   13.584965] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [   13.601326] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [   13.606091] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [   13.613312] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [   13.658214] systemd-resolved[325]: Using system hostname 'target'.
vm-test-run-update-hardware-configuration> target # [   13.664309] systemd[1]: Started Network Name Resolution.
vm-test-run-update-hardware-configuration> target # [   13.684363] systemd-udevd[343]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [   13.744119] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [   13.753752] systemd[1]: Mounting /run/wrappers...
vm-test-run-update-hardware-configuration> target # [   13.801978] systemd[1]: Mounted /run/wrappers.
vm-test-run-update-hardware-configuration> target # [   13.803206] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [   13.810083] systemd[1]: Listening on Boot Loader Control Service Socket.
vm-test-run-update-hardware-configuration> target # [   13.815976] systemd[1]: Starting register-nix-paths.service...
vm-test-run-update-hardware-configuration> target # [   13.820221] systemd[1]: Starting Create SUID/SGID Wrappers...
vm-test-run-update-hardware-configuration> target # [   13.821424] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.
vm-test-run-update-hardware-configuration> target # [   13.828171] systemd[1]: Starting Save Transient machine-id to Disk...
vm-test-run-update-hardware-configuration> target # [   13.844207] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [   13.975757] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [   13.985184] systemd[1]: Starting Rebuild Journal Catalog...
vm-test-run-update-hardware-configuration> target # [   13.998125] systemd[1]: Starting Record System Boot/Shutdown in UTMP...
vm-test-run-update-hardware-configuration> target # [   14.051988] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   14.068785] systemd[1]: Finished Save Transient machine-id to Disk.
vm-test-run-update-hardware-configuration> target # [   14.166783] systemd[1]: Finished Record System Boot/Shutdown in UTMP.
vm-test-run-update-hardware-configuration> target # [   14.217364] systemd[1]: Finished Rebuild Journal Catalog.
vm-test-run-update-hardware-configuration> target # [   14.230553] systemd[1]: Starting Update is Completed...
vm-test-run-update-hardware-configuration> target # [   14.260592] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [   14.324412] systemd[1]: Finished Update is Completed.
vm-test-run-update-hardware-configuration> target # [   14.520947] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.
vm-test-run-update-hardware-configuration> target # [   14.602295] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   14.606424] systemd[1]: Finished Create SUID/SGID Wrappers.
vm-test-run-update-hardware-configuration> target # [   14.639109] systemd[1]: Finished register-nix-paths.service.
vm-test-run-update-hardware-configuration> target # [   14.641454] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [   14.646184] systemd[1]: Started Discard unused filesystem blocks once a week.
vm-test-run-update-hardware-configuration> target # [   14.647771] systemd[1]: Started Daily Cleanup of Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   14.649333] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [   14.651550] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   14.653909] systemd[1]: Listening on Nix Daemon Socket.
vm-test-run-update-hardware-configuration> target # [   14.658209] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).
vm-test-run-update-hardware-configuration> target # [   14.661602] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.
vm-test-run-update-hardware-configuration> target # [   14.663571] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [   14.666196] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   14.671416] systemd[1]: Starting Import lastlog data into lastlog2 database...
vm-test-run-update-hardware-configuration> target # [   14.678402] (udev-worker)[392]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [   14.680268] systemd[1]: Starting Name Service Cache Daemon (nsncd)...
vm-test-run-update-hardware-configuration> target # [   14.688433] (udev-worker)[388]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [   14.692166] systemd[1]: Starting Post-Boot Actions...
vm-test-run-update-hardware-configuration> target # [   14.709815] systemd[1]: Started Reset console on configuration changes.
vm-test-run-update-hardware-configuration> target # [   14.730975] systemd[1]: Starting SSH Host Keys Generation...
vm-test-run-update-hardware-configuration> target # [   14.740273] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.
vm-test-run-update-hardware-configuration> target # [   14.761510] systemd[1]: Started backdoor.service.
vm-test-run-update-hardware-configuration> target # [   14.779793] systemd[1]: Starting D-Bus System Message Bus...
vm-test-run-update-hardware-configuration> target # [   14.793690] nsncd[500]: Sep 21 15:05:20.243 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"
vm-test-run-update-hardware-configuration> target # [   14.804128] systemd[1]: Started Name Service Cache Daemon (nsncd).
vm-test-run-update-hardware-configuration> target # [   14.818177] systemd[1]: Finished Post-Boot Actions.
vm-test-run-update-hardware-configuration> target # [   14.868328] systemd[1]: Reached target Host and Network Name Lookups.
vm-test-run-update-hardware-configuration> target # [   14.876436] systemd[1]: Reached target User and Group Name Lookups.
vm-test-run-update-hardware-configuration> target # [   14.896792] systemd[1]: Starting User Login Management...
vm-test-run-update-hardware-configuration> target # [   14.920144] systemd[1]: Finished Import lastlog data into lastlog2 database.
vm-test-run-update-hardware-configuration> target # connecting to host...
vm-test-run-update-hardware-configuration> target: Guest shell says: b'Spawning backdoor root shell...\n'
vm-test-run-update-hardware-configuration> target: connected to guest root shell
vm-test-run-update-hardware-configuration> target: (connecting took 4.91 seconds)
vm-test-run-update-hardware-configuration> target: (finished: waiting for the VM to finish booting, in 4.91 seconds)
vm-test-run-update-hardware-configuration> target # [   15.009987] dbus-broker-launch[515]: Looking up NSS user entry for 'systemd-timesync'...
vm-test-run-update-hardware-configuration> target # [   15.027785] dbus-broker-launch[515]: NSS returned no entry for 'systemd-timesync'
vm-test-run-update-hardware-configuration> target # [   15.029452] dbus-broker-launch[515]: Invalid user-name in /nix/store/lhszk07v1701bjp6p1z8cbwkzjr5rww8-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"
vm-test-run-update-hardware-configuration> target # [   15.071643] systemd[1]: Started D-Bus System Message Bus.
vm-test-run-update-hardware-configuration> target # [   15.094551] systemd-logind[543]: New seat seat0.
vm-test-run-update-hardware-configuration> target # [   15.103156] systemd[1]: Finished Firewall.
vm-test-run-update-hardware-configuration> target # [   15.104199] systemd[1]: Started User Login Management.
vm-test-run-update-hardware-configuration> target # [   15.105811] systemd[1]: Reached target Preparation for Network.
vm-test-run-update-hardware-configuration> target # [   15.110667] systemd[1]: Listening on Network Management Resolve Hook Socket.
vm-test-run-update-hardware-configuration> target # [   15.122161] systemd[1]: Starting linger-users.service...
vm-test-run-update-hardware-configuration> target # [   15.125726] dbus-broker-launch[515]: Ready
vm-test-run-update-hardware-configuration> target # [   15.135508] systemd[1]: Starting Network Management...
vm-test-run-update-hardware-configuration> target # [   15.251956] systemd[1]: linger-users.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   15.254714] systemd[1]: Finished linger-users.service.
vm-test-run-update-hardware-configuration> target # [   15.530998] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
vm-test-run-update-hardware-configuration> target # [   15.643009] ACPI: button: Power Button [PWRF]
vm-test-run-update-hardware-configuration> target # [   15.772722] cfg80211: Loading compiled-in X.509 certificates for regulatory database
vm-test-run-update-hardware-configuration> target # [   15.779393] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:07.0/virtio5/input/input4
vm-test-run-update-hardware-configuration> target # [   15.784858] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console
vm-test-run-update-hardware-configuration> target # [   15.666319] systemd-resolved[325]: Clock change detected. Flushing caches.
vm-test-run-update-hardware-configuration> target # [   15.802390] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
vm-test-run-update-hardware-configuration> target # [   15.787306] systemd-networkd[572]: lo: Link UP
vm-test-run-update-hardware-configuration> target # [   15.788538] systemd-networkd[572]: lo: Gained carrier
vm-test-run-update-hardware-configuration> target # [   15.797662] systemd-networkd[572]: eth0: Configuring with /etc/systemd/network/99-ethernet-default-dhcp.network.
vm-test-run-update-hardware-configuration> target # [   15.799706] systemd[1]: Started Network Management.
vm-test-run-update-hardware-configuration> target # [   15.807220] systemd[1]: Reached target Network.
vm-test-run-update-hardware-configuration> target # [   15.814796] systemd-networkd[572]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [   15.819226] systemd-networkd[572]: eth1: Configuring with /etc/systemd/network/40-eth1.network.
vm-test-run-update-hardware-configuration> target # [   15.805562] mousedev: PS/2 mouse device common for all mice
vm-test-run-update-hardware-configuration> target # [   15.813449] rtc_cmos PNP0B00:00: RTC can wake from S4
vm-test-run-update-hardware-configuration> target # [   15.822782] systemd[1]: Starting Enable Persistent Storage in systemd-networkd...
vm-test-run-update-hardware-configuration> target # [   15.830853] systemd-networkd[572]: eth0: Link UP
vm-test-run-update-hardware-configuration> target # [   15.836086] systemd-networkd[572]: eth0: Gained carrier
vm-test-run-update-hardware-configuration> target # [   15.847160] systemd[1]: Starting Permit User Sessions...
vm-test-run-update-hardware-configuration> target # [   15.829672] rtc_cmos PNP0B00:00: registered as rtc0
vm-test-run-update-hardware-configuration> target # [   15.829802] rtc_cmos PNP0B00:00: setting system clock to 2026-09-21T15:05:20 UTC (1790003120)
vm-test-run-update-hardware-configuration> target # [   15.829917] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
vm-test-run-update-hardware-configuration> target # [   15.914288] systemd-networkd[572]: eth1: Link UP
vm-test-run-update-hardware-configuration> target # [   15.920829] systemd-networkd[572]: eth1: Gained carrier
vm-test-run-update-hardware-configuration> target # [   15.921960] systemd-networkd[572]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [   15.933296] systemd[1]: Finished Permit User Sessions.
vm-test-run-update-hardware-configuration> target # [   15.940256] systemd-networkd[572]: eth0: DHCPv4 address 10.0.2.15/24, gateway 10.0.2.2 acquired from 10.0.2.2
vm-test-run-update-hardware-configuration> target # [   15.831058] systemd-journald[296]: Time jumped backwards, rotating.
vm-test-run-update-hardware-configuration> target # [   15.864926] parport_pc 00:02: reported by Plug and Play ACPI
vm-test-run-update-hardware-configuration> target # [   15.865046] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
vm-test-run-update-hardware-configuration> target # [   15.931313] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
vm-test-run-update-hardware-configuration> target # [   15.931412] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
vm-test-run-update-hardware-configuration> target # [   15.932855] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
vm-test-run-update-hardware-configuration> target # [   15.932861] cfg80211: failed to load regulatory.db
vm-test-run-update-hardware-configuration> target # [   15.940920] Console: switching to colour dummy device 80x25
vm-test-run-update-hardware-configuration> target # [   16.114888] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
vm-test-run-update-hardware-configuration> target # [   16.115019] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
vm-test-run-update-hardware-configuration> target # [   16.195462] systemd-logind[543]: Watching system buttons on /dev/input/event2 (Power Button)
vm-test-run-update-hardware-configuration> target # [   16.197479] systemd-logind[543]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)
vm-test-run-update-hardware-configuration> target # [   16.115983] NET: Registered PF_PACKET protocol family
vm-test-run-update-hardware-configuration> target # [   16.188549] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6
vm-test-run-update-hardware-configuration> target # [   16.188901] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5
vm-test-run-update-hardware-configuration> target # [   16.298843] systemd-logind[543]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)
vm-test-run-update-hardware-configuration> target # [   16.461548] ppdev: user-space parallel port driver
vm-test-run-update-hardware-configuration> target # [   16.480732] iTCO_wdt iTCO_wdt.0.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
vm-test-run-update-hardware-configuration> target # [   16.341770] sshd-keygen-start[545]: Generating public/private rsa key pair.
vm-test-run-update-hardware-configuration> target # [   16.343388] sshd-keygen-start[545]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key
vm-test-run-update-hardware-configuration> target # [   16.345950] sshd-keygen-start[545]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
vm-test-run-update-hardware-configuration> target # [   16.348134] sshd-keygen-start[545]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [   16.349537] sshd-keygen-start[545]: SHA256:s5MPc0+dfVzgOOO9+pvxaftI995k4mjMndMldA2Te2Q root@target
vm-test-run-update-hardware-configuration> target # [   16.351330] sshd-keygen-start[545]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [   16.352702] sshd-keygen-start[545]: +---[RSA 4096]----+
vm-test-run-update-hardware-configuration> target # [   16.354825] sshd-keygen-start[545]: |               . |
vm-test-run-update-hardware-configuration> target # [   16.356001] sshd-keygen-start[545]: |              + E|
vm-test-run-update-hardware-configuration> target # [   16.357182] sshd-keygen-start[545]: |              .*.|
vm-test-run-update-hardware-configuration> target # [   16.358266] sshd-keygen-start[545]: |             oo.+|
vm-test-run-update-hardware-configuration> target # [   16.359402] sshd-keygen-start[545]: |        S   +..o.|
vm-test-run-update-hardware-configuration> target # [   16.361763] sshd-keygen-start[545]: |         + . =.+o|
vm-test-run-update-hardware-configuration> target # [   16.362945] sshd-keygen-start[545]: |        * .oo.B+O|
vm-test-run-update-hardware-configuration> target # [   16.364381] sshd-keygen-start[545]: |         * o+++%*|
vm-test-run-update-hardware-configuration> target # [   16.365850] sshd-keygen-start[545]: |          ..+oO*O|
vm-test-run-update-hardware-configuration> target # [   16.367122] sshd-keygen-start[545]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   16.526339] iTCO_wdt iTCO_wdt.0.auto: initialized. heartbeat=30 sec (nowayout=0)
vm-test-run-update-hardware-configuration> target # [   16.381543] systemd[1]: Started Getty on tty1.
vm-test-run-update-hardware-configuration> target # [   16.383422] systemd[1]: Reached target Login Prompts.
vm-test-run-update-hardware-configuration> target # [   16.386330] systemd[1]: Finished Enable Persistent Storage in systemd-networkd.
vm-test-run-update-hardware-configuration> target # [   16.626521] [drm] Found bochs VGA, ID 0xb0c5.
vm-test-run-update-hardware-configuration> target # [   16.627245] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
vm-test-run-update-hardware-configuration> target # [   16.419659] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
vm-test-run-update-hardware-configuration> target # [   16.428861] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   16.667846] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic
vm-test-run-update-hardware-configuration> target # [   16.668949] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0
vm-test-run-update-hardware-configuration> target # [   16.459098] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   16.463181] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   16.479176] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   16.493751] sshd-keygen-start[600]: Generating public/private ed25519 key pair.
vm-test-run-update-hardware-configuration> target # [   16.495348] sshd-keygen-start[600]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
vm-test-run-update-hardware-configuration> target # [   16.497161] sshd-keygen-start[600]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
vm-test-run-update-hardware-configuration> target # [   16.500127] sshd-keygen-start[600]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [   16.501389] sshd-keygen-start[600]: SHA256:ckep5BhyCqv+Cmwx6t0ausaq7wC9oZd6aq0aaQZW5eI root@target
vm-test-run-update-hardware-configuration> target # [   16.503243] sshd-keygen-start[600]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [   16.504553] sshd-keygen-start[600]: +--[ED25519 256]--+
vm-test-run-update-hardware-configuration> target # [   16.505686] sshd-keygen-start[600]: |     .           |
vm-test-run-update-hardware-configuration> target # [   16.507660] sshd-keygen-start[600]: |    o      .     |
vm-test-run-update-hardware-configuration> target # [   16.511115] sshd-keygen-start[600]: |  .o..o . o      |
vm-test-run-update-hardware-configuration> target # [   16.512218] sshd-keygen-start[600]: | .oo.+ = o       |
vm-test-run-update-hardware-configuration> target # [   16.513319] sshd-keygen-start[600]: |o++E. o S .      |
vm-test-run-update-hardware-configuration> target # [   16.514401] sshd-keygen-start[600]: |*+o+   o .       |
vm-test-run-update-hardware-configuration> target # [   16.515599] sshd-keygen-start[600]: |X==.             |
vm-test-run-update-hardware-configuration> target # [   16.516752] sshd-keygen-start[600]: |BO+.o            |
vm-test-run-update-hardware-configuration> target # [   16.517818] sshd-keygen-start[600]: |%%B+..           |
vm-test-run-update-hardware-configuration> target # [   16.518905] sshd-keygen-start[600]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   16.535279] systemd[1]: sshd-keygen.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   16.539573] systemd[1]: Finished SSH Host Keys Generation.
vm-test-run-update-hardware-configuration> target # [   16.546889] systemd[1]: Starting SSH Daemon...
vm-test-run-update-hardware-configuration> target # [   16.773752] Console: switching to colour frame buffer device 160x50
vm-test-run-update-hardware-configuration> target # [   16.776424] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device
vm-test-run-update-hardware-configuration> target # [   16.587450] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   16.590343] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   16.606800] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   16.649710] sshd[605]: Server listening on 0.0.0.0 port 22.
vm-test-run-update-hardware-configuration> target # [   16.651492] sshd[605]: Server listening on :: port 22.
vm-test-run-update-hardware-configuration> target # [   16.653808] systemd[1]: Started SSH Daemon.
vm-test-run-update-hardware-configuration> target # [   16.655604] systemd[1]: Reached target Multi-User System.
vm-test-run-update-hardware-configuration> target # [   16.907368] kvm_amd: TSC scaling supported
vm-test-run-update-hardware-configuration> target # [   16.909294] kvm_amd: Nested Virtualization enabled
vm-test-run-update-hardware-configuration> target # [   16.910534] kvm_amd: Nested Paging enabled
vm-test-run-update-hardware-configuration> target # [   16.911114] kvm_amd: LBR virtualization supported
vm-test-run-update-hardware-configuration> target # [   16.913268] kvm_amd: Virtual GIF supported
vm-test-run-update-hardware-configuration> target # [   16.914545] kvm_amd: Virtual NMI enabled
vm-test-run-update-hardware-configuration> target # [   16.966734] EDAC MC: Ver: 3.0.0
vm-test-run-update-hardware-configuration> target # [   16.873672] systemd-vconsole-setup[607]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [   16.879597] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   16.883642] systemd[1]: Startup finished in 1.152s (kernel) + 10.438s (initrd) + 5.291s (userspace) = 16.883s.
vm-test-run-update-hardware-configuration> target # Connection to localhost (::1) 22 port [tcp/ssh] succeeded!
vm-test-run-update-hardware-configuration> target: (finished: waiting for TCP port 22 on localhost, in 6.84 seconds)
vm-test-run-update-hardware-configuration> Setting up port forwarding from host port 56013 to guest port 22
vm-test-run-update-hardware-configuration> target # [   16.899696] systemd-networkd[572]: eth0: Gained IPv6LL
vm-test-run-update-hardware-configuration> target # [   16.918378] sshd-session[622]: Connection closed by ::1 port 37946 [preauth]
vm-test-run-update-hardware-configuration> target # [   17.027327] systemd-networkd[572]: eth1: Gained IPv6LL
vm-test-run-update-hardware-configuration> Host port 56013 is now listening
vm-test-run-update-hardware-configuration> target # [   18.918314] sshd-session[624]: Connection closed by 10.0.2.2 port 44270 [preauth]
vm-test-run-update-hardware-configuration> target # [   34.757431] sshd-session[630]: Accepted publickey for nonrootuser from 10.0.2.2 port 35902 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   34.765846] sshd-session[630]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   34.786337] systemd[1]: Created slice Slice /user/1000.
vm-test-run-update-hardware-configuration> target # [   34.789506] systemd[1]: Starting User Runtime Directory /run/user/1000...
vm-test-run-update-hardware-configuration> target # [   34.809268] systemd-logind[543]: New session '1' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   34.825305] systemd[1]: Finished User Runtime Directory /run/user/1000.
vm-test-run-update-hardware-configuration> target # [   34.830655] systemd[1]: Starting User Manager for UID 1000...
vm-test-run-update-hardware-configuration> target # [   34.853302] (systemd)[636]: pam_unix(systemd-user:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   34.860122] systemd-logind[543]: New session '2' of user 'nonrootuser' with class 'manager' and type 'unspecified'.
vm-test-run-update-hardware-configuration> target # [   34.879358] systemd[636]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   35.137473] systemd[636]: Queued start job for default target Main User Target.
vm-test-run-update-hardware-configuration> target # [   35.139230] systemd[636]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   35.141375] systemd[636]: Created slice User Application Slice.
vm-test-run-update-hardware-configuration> target # [   35.144574] systemd[636]: Started Daily Cleanup of User's Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   35.146405] systemd[636]: Reached target Paths.
vm-test-run-update-hardware-configuration> target # [   35.148359] systemd[636]: Reached target Timers.
vm-test-run-update-hardware-configuration> target # [   35.150158] systemd[636]: Starting D-Bus User Message Bus Socket...
vm-test-run-update-hardware-configuration> target # [   35.151541] systemd[636]: Starting Create User Files and Directories...
vm-test-run-update-hardware-configuration> target # [   35.153640] systemd[636]: Finished Create User Files and Directories.
vm-test-run-update-hardware-configuration> target # [   35.155274] systemd[636]: Listening on D-Bus User Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   35.157168] systemd[636]: Reached target Sockets.
vm-test-run-update-hardware-configuration> target # [   35.158244] systemd[636]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   35.159409] systemd[1]: Started User Manager for UID 1000.
vm-test-run-update-hardware-configuration> target # [   35.161341] systemd[1]: Started Session 1 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   35.162442] systemd[636]: Starting Run user-specific NixOS activation...
vm-test-run-update-hardware-configuration> target # [   35.163840] systemd[636]: Finished Run user-specific NixOS activation.
vm-test-run-update-hardware-configuration> target # [   35.165299] systemd[636]: Reached target Main User Target.
vm-test-run-update-hardware-configuration> target # [   35.166339] systemd[636]: Startup finished in 191ms.
vm-test-run-update-hardware-configuration> target # [   35.184263] sudo[655]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-facter
vm-test-run-update-hardware-configuration> target # [   35.191551] sudo[655]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   35.498537] sr 2:0:0:0: Attached scsi generic sg0 type 5
vm-test-run-update-hardware-configuration> target # [   35.402890] sudo[655]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   35.411887] sshd-session[647]: Received disconnect from 10.0.2.2 port 35902:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   35.414755] sshd-session[647]: Disconnected from user nonrootuser 10.0.2.2 port 35902
vm-test-run-update-hardware-configuration> target # [   35.416550] sshd-session[630]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   35.421973] systemd-logind[543]: Session 1 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> target # [   48.278630] sshd-session[689]: Accepted publickey for nonrootuser from 10.0.2.2 port 48386 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   48.285669] sshd-session[689]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   48.293412] systemd-logind[543]: New session '3' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   48.296774] systemd[1]: Started Session 3 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   48.356752] sudo[699]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-generate-config --no-filesystems --show-hardware-config
vm-test-run-update-hardware-configuration> target # [   48.365495] sudo[699]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   48.513401] sudo[699]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   48.522933] sshd-session[692]: Received disconnect from 10.0.2.2 port 48386:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   48.524539] sshd-session[692]: Disconnected from user nonrootuser 10.0.2.2 port 48386
vm-test-run-update-hardware-configuration> target # [   48.526202] sshd-session[689]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   48.531386] systemd-logind[543]: Session 3 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> (finished: run the VM test script, in 50.28 seconds)
vm-test-run-update-hardware-configuration> test script finished in 53.82s
vm-test-run-update-hardware-configuration> cleanup
vm-test-run-update-hardware-configuration> kill QemuMachine (pid 45)
vm-test-run-update-hardware-configuration> target # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/d64q19q1xjdwfhqx6czvrjgrhq0n3lcc-python3-3.14.7/bin/python3.14)
vm-test-run-update-hardware-configuration> target # [2026-09-21T15:05:58Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-09-21T15:05:58Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-09-21T15:05:58Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> (finished: cleanup, in 0.13 seconds)

post-build step Upload to niks3: ok
time=2026-09-21T15:06:03.575Z level=INFO msg="Uploading 0 paths to niks3.clan.lol (1 already cached)"
time=2026-09-21T15:06:03.968Z level=INFO msg="Uploading 1 narinfos"
time=2026-09-21T15:06:04.451Z level=INFO msg="Upload complete. (976ms)"