don't know how to build these paths:
  /nix/store/rykfklz4fvpwxg7q5vzq9xvdg1zh70f2-vm-test-run-update-hardware-configuration.drv
warning: ignoring the client-specified setting 'store', because it is a restricted setting and you are not a trusted user
building '/nix/store/q19d55p8b363pan1yczpmds0hjc3v4yf-test-script.drv' on nix-store.geninf.io:50051
test-script> gi-build-x86-02: building q19d55p8b363pan1yczpmds0hjc3v4yf-test-script.drv
test-script> structuredAttrs is enabled
building '/nix/store/sfwan4qy5ncb9zcgdhxkjabqfxjg5rrf-driverConfiguration.json.drv' on nix-store.geninf.io:50051
driverConfiguration.json> build-x86-01: building sfwan4qy5ncb9zcgdhxkjabqfxjg5rrf-driverConfiguration.json.drv
driverConfiguration.json> structuredAttrs is enabled
building '/nix/store/8s6rcc7038x7qyfk03sqq00naz1f6wrj-nixos-test-driver-update-hardware-configuration.drv' on nix-store.geninf.io:50051
nixos-test-driver-update-hardware-configuration> build-x86-01: building 8s6rcc7038x7qyfk03sqq00naz1f6wrj-nixos-test-driver-update-hardware-configuration.drv
nixos-test-driver-update-hardware-configuration> Running type check (enable/disable: config.skipTypeCheck)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck
nixos-test-driver-update-hardware-configuration> All checks passed!
nixos-test-driver-update-hardware-configuration> Linting test script (enable/disable: config.skipLint)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint
nixos-test-driver-update-hardware-configuration> All checks passed!
building '/nix/store/rykfklz4fvpwxg7q5vzq9xvdg1zh70f2-vm-test-run-update-hardware-configuration.drv' on nix-store.geninf.io:50051
vm-test-run-update-hardware-configuration> build-x86-01: building rykfklz4fvpwxg7q5vzq9xvdg1zh70f2-vm-test-run-update-hardware-configuration.drv
vm-test-run-update-hardware-configuration> Machine state will be reset. To keep it, pass --keep-machine-state
vm-test-run-update-hardware-configuration> start all VLans
vm-test-run-update-hardware-configuration> (finished: start all VLans, in 0.00 seconds)
vm-test-run-update-hardware-configuration> Test will time out and terminate in 3600.0 seconds
vm-test-run-update-hardware-configuration> run the VM test script
vm-test-run-update-hardware-configuration> additionally exposed symbols:
vm-test-run-update-hardware-configuration>     target,
vm-test-run-update-hardware-configuration>     vlan1,
vm-test-run-update-hardware-configuration>     start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh
vm-test-run-update-hardware-configuration> target: starting vm
vm-test-run-update-hardware-configuration> target # Disk image does not exist, creating the virtualisation disk image...
vm-test-run-update-hardware-configuration> target: QEMU running (pid 45)
vm-test-run-update-hardware-configuration> target # Formatting '/build/vm-state-target/tmp.wUcDIrq89j', fmt=raw size=8589934592
vm-test-run-update-hardware-configuration> target # mke2fs 1.47.4 (6-Mar-2025)
vm-test-run-update-hardware-configuration> target # Discarding device blocks:       0/2097152               done
vm-test-run-update-hardware-configuration> target # Creating filesystem with 2097152 4k blocks and 524288 inodes
vm-test-run-update-hardware-configuration> target # Filesystem UUID: f22375a6-fdea-4fea-8002-aa2cbf3da7ed
vm-test-run-update-hardware-configuration> target # Superblock backups stored on blocks:
vm-test-run-update-hardware-configuration> target # 	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Allocating group tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Writing inode tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Creating journal (16384 blocks): done
vm-test-run-update-hardware-configuration> target # Writing superblocks and filesystem accounting information:  0/64     done
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Virtualisation disk image created.
vm-test-run-update-hardware-configuration> target # Formatting 'empty0.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=536870912 lazy_refcounts=off refcount_bits=16
vm-test-run-update-hardware-configuration> target # Starting virtiofs daemons...
vm-test-run-update-hardware-configuration> target # [2026-10-05T15:13:24Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-05T15:13:24Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-05T15:13:24Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-05T15:13:24Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-05T15:13:24Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-05T15:13:24Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-05T15:13:24Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-05T15:13:24Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-05T15:13:24Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-05T15:13:24Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-10-05T15:13:24Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-10-05T15:13:24Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC550+7EF2C550 CA00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:02.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:06.0 CB00 PCI2.10 PnP PMM 7EFCC550 7EF2C550 CB00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:06.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Booting from ROM...
vm-test-run-update-hardware-configuration> target # Probing EDD (edd=off to disable)... o[    0.000000] Linux version 6.18.55 (nixbld@localhost) (gcc (GCC) 16.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Sat Oct  3 10:39:03 UTC 2026
vm-test-run-update-hardware-configuration> target # [    0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/mrxxqnwd7xv6zgys05dixzj6icyshfvb-nixos-system-target-test/init regInfo=/nix/.ro-store/364xbshxyqjv6vqlrzsbh29zcc16bgdc-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-provided physical RAM map:
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd4fff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000007ffd5000-0x000000007fffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013e7fffff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] NX (Execute Disable) protection: active
vm-test-run-update-hardware-configuration> target # [    0.000000] APIC: Static calls initialized
vm-test-run-update-hardware-configuration> target # [    0.000000] SMBIOS 2.8 present.
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: Memory slots populated: 1/1
vm-test-run-update-hardware-configuration> target # [    0.000000] Hypervisor detected: KVM
vm-test-run-update-hardware-configuration> target # [    0.000000] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
vm-test-run-update-hardware-configuration> target # [    0.000001] kvm-clock: using sched offset of 435788502 cycles
vm-test-run-update-hardware-configuration> target # [    0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
vm-test-run-update-hardware-configuration> target # [    0.000006] tsc: Detected 4192.120 MHz processor
vm-test-run-update-hardware-configuration> target # [    0.000565] last_pfn = 0x13e800 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000596] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
vm-test-run-update-hardware-configuration> target # [    0.000599] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
vm-test-run-update-hardware-configuration> target # [    0.000646] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.002240] found SMP MP-table at [mem 0x000f5450-0x000f545f]
vm-test-run-update-hardware-configuration> target # [    0.002257] Using GB pages for direct mapping
vm-test-run-update-hardware-configuration> target # [    0.002382] RAMDISK: [mem 0x7e2e3000-0x7ffcffff]
vm-test-run-update-hardware-configuration> target # [    0.002387] ACPI: Early table checksum verification disabled
vm-test-run-update-hardware-configuration> target # [    0.002392] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS )
vm-test-run-update-hardware-configuration> target # [    0.002396] ACPI: RSDT 0x000000007FFE2433 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002401] ACPI: FACP 0x000000007FFE222B 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002408] ACPI: DSDT 0x000000007FFE0040 0021EB (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002409] ACPI: FACS 0x000000007FFE0000 000040
vm-test-run-update-hardware-configuration> target # [    0.002411] ACPI: APIC 0x000000007FFE231F 000078 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002412] ACPI: HPET 0x000000007FFE2397 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002413] ACPI: MCFG 0x000000007FFE23CF 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002414] ACPI: WAET 0x000000007FFE240B 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002415] ACPI: Reserving FACP table memory at [mem 0x7ffe222b-0x7ffe231e]
vm-test-run-update-hardware-configuration> target # [    0.002416] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe222a]
vm-test-run-update-hardware-configuration> target # [    0.002417] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
vm-test-run-update-hardware-configuration> target # [    0.002417] ACPI: Reserving APIC table memory at [mem 0x7ffe231f-0x7ffe2396]
vm-test-run-update-hardware-configuration> target # [    0.002417] ACPI: Reserving HPET table memory at [mem 0x7ffe2397-0x7ffe23ce]
vm-test-run-update-hardware-configuration> target # [    0.002418] ACPI: Reserving MCFG table memory at [mem 0x7ffe23cf-0x7ffe240a]
vm-test-run-update-hardware-configuration> target # [    0.002418] ACPI: Reserving WAET table memory at [mem 0x7ffe240b-0x7ffe2432]
vm-test-run-update-hardware-configuration> target # [    0.002789] No NUMA configuration found
vm-test-run-update-hardware-configuration> target # [    0.002790] Faking a node at [mem 0x0000000000000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002792] NODE_DATA(0) allocated [mem 0x13e7f8780-0x13e7fdcff]
vm-test-run-update-hardware-configuration> target # [    0.002877] Zone ranges:
vm-test-run-update-hardware-configuration> target # [    0.002878]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
vm-test-run-update-hardware-configuration> target # [    0.002879]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
vm-test-run-update-hardware-configuration> target # [    0.002880]   Normal   [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002881]   Device   empty
vm-test-run-update-hardware-configuration> target # [    0.002882] Movable zone start for each node
vm-test-run-update-hardware-configuration> target # [    0.002883] Early memory node ranges
vm-test-run-update-hardware-configuration> target # [    0.002883]   node   0: [mem 0x0000000000001000-0x000000000009efff]
vm-test-run-update-hardware-configuration> target # [    0.002884]   node   0: [mem 0x0000000000100000-0x000000007ffd4fff]
vm-test-run-update-hardware-configuration> target # [    0.002884]   node   0: [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002885] Initmem setup node 0 [mem 0x0000000000001000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002905] On node 0, zone DMA: 1 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.003123] On node 0, zone DMA: 97 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.045192] On node 0, zone Normal: 43 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.045510] On node 0, zone Normal: 6144 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.046370] ACPI: PM-Timer IO Port: 0x608
vm-test-run-update-hardware-configuration> target # [    0.046390] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
vm-test-run-update-hardware-configuration> target # [    0.046420] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
vm-test-run-update-hardware-configuration> target # [    0.046423] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
vm-test-run-update-hardware-configuration> target # [    0.046425] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
vm-test-run-update-hardware-configuration> target # [    0.046426] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
vm-test-run-update-hardware-configuration> target # [    0.046427] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
vm-test-run-update-hardware-configuration> target # [    0.046427] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
vm-test-run-update-hardware-configuration> target # [    0.046429] ACPI: Using ACPI (MADT) for SMP configuration information
vm-test-run-update-hardware-configuration> target # [    0.046430] ACPI: HPET id: 0x8086a201 base: 0xfed00000
vm-test-run-update-hardware-configuration> target # [    0.046436] TSC deadline timer available
vm-test-run-update-hardware-configuration> target # [    0.046440] CPU topo: Max. logical packages:   1
vm-test-run-update-hardware-configuration> target # [    0.046441] CPU topo: Max. logical dies:       1
vm-test-run-update-hardware-configuration> target # [    0.046441] CPU topo: Max. dies per package:   1
vm-test-run-update-hardware-configuration> target # [    0.046444] CPU topo: Max. threads per core:   1
vm-test-run-update-hardware-configuration> target # [    0.046444] CPU topo: Num. cores per package:     1
vm-test-run-update-hardware-configuration> target # [    0.046444] CPU topo: Num. threads per package:   1
vm-test-run-update-hardware-configuration> target # [    0.046445] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs
vm-test-run-update-hardware-configuration> target # [    0.046467] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
vm-test-run-update-hardware-configuration> target # [    0.046495] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
vm-test-run-update-hardware-configuration> target # [    0.046496] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
vm-test-run-update-hardware-configuration> target # [    0.046497] PM: hibernation: Registered nosave memory: [mem 0x7ffd5000-0xffffffff]
vm-test-run-update-hardware-configuration> target # [    0.046498] [mem 0xc0000000-0xfed1bfff] available for PCI devices
vm-test-run-update-hardware-configuration> target # [    0.046500] Booting paravirtualized kernel on KVM
vm-test-run-update-hardware-configuration> target # [    0.046505] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
vm-test-run-update-hardware-configuration> target # [    0.049921] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
vm-test-run-update-hardware-configuration> target # [    0.051616] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152
vm-test-run-update-hardware-configuration> target # [    0.051661] kvm-guest: PV spinlocks disabled, single CPU
vm-test-run-update-hardware-configuration> target # [    0.051663] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/mrxxqnwd7xv6zgys05dixzj6icyshfvb-nixos-system-target-test/init regInfo=/nix/.ro-store/364xbshxyqjv6vqlrzsbh29zcc16bgdc-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.051741] Unknown kernel command line parameters "regInfo=/nix/.ro-store/364xbshxyqjv6vqlrzsbh29zcc16bgdc-closure-info/registration", will be passed to user space.
vm-test-run-update-hardware-configuration> target # [    0.051941] random: crng init done
vm-test-run-update-hardware-configuration> target # [    0.051941] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
vm-test-run-update-hardware-configuration> target # [    0.055388] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.057425] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.057472] software IO TLB: area num 1.
vm-test-run-update-hardware-configuration> target # [    0.115630] Fallback order for Node 0: 0
vm-test-run-update-hardware-configuration> target # [    0.115637] Built 1 zonelists, mobility grouping on.  Total pages: 780147
vm-test-run-update-hardware-configuration> target # [    0.115639] Policy zone: Normal
vm-test-run-update-hardware-configuration> target # [    0.117530] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
vm-test-run-update-hardware-configuration> target # [    0.122673] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
vm-test-run-update-hardware-configuration> target # [    0.127866] allocated 6291456 bytes of page_ext
vm-test-run-update-hardware-configuration> target # [    0.136847] ftrace: allocating 48837 entries in 192 pages
vm-test-run-update-hardware-configuration> target # [    0.136848] ftrace: allocated 192 pages with 2 groups
vm-test-run-update-hardware-configuration> target # [    0.137546] Dynamic Preempt: lazy
vm-test-run-update-hardware-configuration> target # [    0.137678] rcu: Preemptible hierarchical RCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.137679] rcu: 	RCU event tracing is enabled.
vm-test-run-update-hardware-configuration> target # [    0.137680] rcu: 	RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.137680] 	Trampoline variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.137681] 	Rude variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.137681] 	Tracing variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.137682] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
vm-test-run-update-hardware-configuration> target # [    0.137682] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
vm-test-run-update-hardware-configuration> target # [    0.137699] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.137700] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.137701] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.140912] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16
vm-test-run-update-hardware-configuration> target # [    0.141167] rcu: srcu_init: Setting srcu_struct sizes based on contention.
vm-test-run-update-hardware-configuration> target # [    0.141175] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
vm-test-run-update-hardware-configuration> target # [    0.141334] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
vm-test-run-update-hardware-configuration> target # [    0.146531] Console: colour VGA+ 80x25
vm-test-run-update-hardware-configuration> target # [    0.146534] printk: legacy console [tty0] enabled
vm-test-run-update-hardware-configuration> target # [    0.178467] printk: legacy console [ttyS0] enabled
vm-test-run-update-hardware-configuration> target # [    0.318325] ACPI: Core revision 20250807
vm-test-run-update-hardware-configuration> target # [    0.319377] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
vm-test-run-update-hardware-configuration> target # [    0.321326] APIC: Switch to symmetric I/O mode setup
vm-test-run-update-hardware-configuration> target # [    0.322499] x2apic enabled
vm-test-run-update-hardware-configuration> target # [    0.323320] APIC: Switched APIC routing to: physical x2apic
vm-test-run-update-hardware-configuration> target # [    0.325281] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
vm-test-run-update-hardware-configuration> target # [    0.326525] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d4d0b6d3, max_idle_ns: 440795255641 ns
vm-test-run-update-hardware-configuration> target # [    0.328597] Calibrating delay loop (skipped) preset value.. 8384.24 BogoMIPS (lpj=4192120)
vm-test-run-update-hardware-configuration> target # [    0.330623] x86/cpu: User Mode Instruction Prevention (UMIP) activated
vm-test-run-update-hardware-configuration> target # [    0.331703] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
vm-test-run-update-hardware-configuration> target # [    0.332595] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
vm-test-run-update-hardware-configuration> target # [    0.333606] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
vm-test-run-update-hardware-configuration> target # [    0.335595] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
vm-test-run-update-hardware-configuration> target # [    0.337595] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
vm-test-run-update-hardware-configuration> target # [    0.338594] Speculative Return Stack Overflow: Mitigation: Safe RET
vm-test-run-update-hardware-configuration> target # [    0.340595] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
vm-test-run-update-hardware-configuration> target # [    0.341602] Spectre V2 : Enabling IBPB for BPF
vm-test-run-update-hardware-configuration> target # [    0.343321] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
vm-test-run-update-hardware-configuration> target # [    0.344599] active return thunk: srso_alias_return_thunk
vm-test-run-update-hardware-configuration> target # [    0.345622] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
vm-test-run-update-hardware-configuration> target # [    0.346594] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
vm-test-run-update-hardware-configuration> target # [    0.347594] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
vm-test-run-update-hardware-configuration> target # [    0.348594] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
vm-test-run-update-hardware-configuration> target # [    0.349594] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
vm-test-run-update-hardware-configuration> target # [    0.351594] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
vm-test-run-update-hardware-configuration> target # [    0.352594] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
vm-test-run-update-hardware-configuration> target # [    0.353594] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
vm-test-run-update-hardware-configuration> target # [    0.355594] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
vm-test-run-update-hardware-configuration> target # [    0.356595] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
vm-test-run-update-hardware-configuration> target # [    0.357594] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
vm-test-run-update-hardware-configuration> target # [    0.358594] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
vm-test-run-update-hardware-configuration> target # [    0.360594] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
vm-test-run-update-hardware-configuration> target # [    0.361594] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
vm-test-run-update-hardware-configuration> target # [    0.362594] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16
vm-test-run-update-hardware-configuration> target # [    0.363594] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]:   24
vm-test-run-update-hardware-configuration> target # [    0.364594] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.
vm-test-run-update-hardware-configuration> target # [    0.391630] Freeing SMP alternatives memory: 48K
vm-test-run-update-hardware-configuration> target # [    0.392574] pid_max: default: 32768 minimum: 301
vm-test-run-update-hardware-configuration> target # [    0.393608] LSM: initializing lsm=capability,landlock,yama,bpf,ima
vm-test-run-update-hardware-configuration> target # [    0.394666] landlock: Up and running.
vm-test-run-update-hardware-configuration> target # [    0.395594] Yama: becoming mindful.
vm-test-run-update-hardware-configuration> target # [    0.396615] LSM support for eBPF active
vm-test-run-update-hardware-configuration> target # [    0.397528] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.398650] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.400347] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2)
vm-test-run-update-hardware-configuration> target # [    0.400995] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
vm-test-run-update-hardware-configuration> target # [    0.401598] ... version:                   2
vm-test-run-update-hardware-configuration> target # [    0.402486] ... bit width:                 48
vm-test-run-update-hardware-configuration> target # [    0.403304] ... generic counters:          6
vm-test-run-update-hardware-configuration> target # [    0.403604] ... generic bitmap:            000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.404596] ... fixed-purpose counters:    0
vm-test-run-update-hardware-configuration> target # [    0.405477] ... fixed-purpose bitmap:      0000000000000000
vm-test-run-update-hardware-configuration> target # [    0.406482] ... value mask:                0000ffffffffffff
vm-test-run-update-hardware-configuration> target # [    0.407484] ... max period:                00007fffffffffff
vm-test-run-update-hardware-configuration> target # [    0.408482] ... global_ctrl mask:          000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.409565] signal: max sigframe size: 3376
vm-test-run-update-hardware-configuration> target # [    0.410325] rcu: Hierarchical SRCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.410599] rcu: 	Max phase no-delay instances is 400.
vm-test-run-update-hardware-configuration> target # [    0.414637] smp: Bringing up secondary CPUs ...
vm-test-run-update-hardware-configuration> target # [    0.415570] smp: Brought up 1 node, 1 CPU
vm-test-run-update-hardware-configuration> target # [    0.416232] smpboot: Total of 1 processors activated (8384.24 BogoMIPS)
vm-test-run-update-hardware-configuration> target # [    0.417028] Memory: 2906344K/3120588K available (18124K kernel code, 2728K rwdata, 13644K rodata, 3656K init, 3632K bss, 201812K reserved, 0K cma-reserved)
vm-test-run-update-hardware-configuration> target # [    0.417787] devtmpfs: initialized
vm-test-run-update-hardware-configuration> target # [    0.418651] x86/mm: Memory block size: 128MB
vm-test-run-update-hardware-configuration> target # [    0.420419] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.421620] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).
vm-test-run-update-hardware-configuration> target # [    0.422661] pinctrl core: initialized pinctrl subsystem
vm-test-run-update-hardware-configuration> target # [    0.423813] PM: RTC time: 15:13:24, date: 2026-10-05
vm-test-run-update-hardware-configuration> target # [    0.426579] NET: Registered PF_NETLINK/PF_ROUTE protocol family
vm-test-run-update-hardware-configuration> target # [    0.428110] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.428624] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.429997] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.430603] audit: initializing netlink subsys (disabled)
vm-test-run-update-hardware-configuration> target # [    0.431784] thermal_sys: Registered thermal governor 'fair_share'
vm-test-run-update-hardware-configuration> target # [    0.431786] thermal_sys: Registered thermal governor 'bang_bang'
vm-test-run-update-hardware-configuration> target # [    0.432596] thermal_sys: Registered thermal governor 'step_wise'
vm-test-run-update-hardware-configuration> target # [    0.433599] audit: type=2000 audit(1791213205.543:1): state=initialized audit_enabled=0 res=1
vm-test-run-update-hardware-configuration> target # [    0.435597] thermal_sys: Registered thermal governor 'user_space'
vm-test-run-update-hardware-configuration> target # [    0.435599] thermal_sys: Registered thermal governor 'power_allocator'
vm-test-run-update-hardware-configuration> target # [    0.436608] cpuidle: using governor menu
vm-test-run-update-hardware-configuration> target # [    0.439242] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vm-test-run-update-hardware-configuration> target # [    0.439800] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.440598] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
vm-test-run-update-hardware-configuration> target # [    0.441607] PCI: Using configuration type 1 for base access
vm-test-run-update-hardware-configuration> target # [    0.442742] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
vm-test-run-update-hardware-configuration> target # [    0.449780] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.450596] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
vm-test-run-update-hardware-configuration> target # [    0.455595] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.456597] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
vm-test-run-update-hardware-configuration> target # [    0.463892] ACPI: Added _OSI(Module Device)
vm-test-run-update-hardware-configuration> target # [    0.464596] ACPI: Added _OSI(Processor Device)
vm-test-run-update-hardware-configuration> target # [    0.465501] ACPI: Added _OSI(Processor Aggregator Device)
vm-test-run-update-hardware-configuration> target # [    0.470457] ACPI: 1 ACPI AML tables successfully acquired and loaded
vm-test-run-update-hardware-configuration> target # [    0.476126] ACPI: Interpreter enabled
vm-test-run-update-hardware-configuration> target # [    0.476608] ACPI: PM: (supports S0 S3 S4 S5)
vm-test-run-update-hardware-configuration> target # [    0.477490] ACPI: Using IOAPIC for interrupt routing
vm-test-run-update-hardware-configuration> target # [    0.478416] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
vm-test-run-update-hardware-configuration> target # [    0.479596] PCI: Using E820 reservations for host bridge windows
vm-test-run-update-hardware-configuration> target # [    0.480707] ACPI: Enabled 2 GPEs in block 00 to 3F
vm-test-run-update-hardware-configuration> target # [    0.484781] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
vm-test-run-update-hardware-configuration> target # [    0.485601] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
vm-test-run-update-hardware-configuration> target # [    0.486654] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]
vm-test-run-update-hardware-configuration> target # [    0.487689] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
vm-test-run-update-hardware-configuration> target # [    0.489006] PCI host bridge to bus 0000:00
vm-test-run-update-hardware-configuration> target # [    0.489600] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.490596] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.491596] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.492596] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.493596] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.494596] pci_bus 0000:00: root bus resource [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.495596] pci_bus 0000:00: root bus resource [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.496684] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.498225] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.500599] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
vm-test-run-update-hardware-configuration> target # [    0.501615] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
vm-test-run-update-hardware-configuration> target # [    0.502633] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
vm-test-run-update-hardware-configuration> target # [    0.503766] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
vm-test-run-update-hardware-configuration> target # [    0.505357] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.507660] pci 0000:00:02.0: BAR 0 [io  0xc180-0xc19f]
vm-test-run-update-hardware-configuration> target # [    0.508606] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
vm-test-run-update-hardware-configuration> target # [    0.509669] pci 0000:00:02.0: BAR 4 [mem 0xe0000000000-0xe0000003fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.510606] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]
vm-test-run-update-hardware-configuration> target # [    0.512577] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.514606] pci 0000:00:03.0: BAR 0 [io  0xc1a0-0xc1bf]
vm-test-run-update-hardware-configuration> target # [    0.515606] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
vm-test-run-update-hardware-configuration> target # [    0.516633] pci 0000:00:03.0: BAR 4 [mem 0xe0000004000-0xe0000007fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.518466] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.521839] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
vm-test-run-update-hardware-configuration> target # [    0.522607] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
vm-test-run-update-hardware-configuration> target # [    0.523634] pci 0000:00:04.0: BAR 4 [mem 0xe0000008000-0xe000000bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.525441] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.527606] pci 0000:00:05.0: BAR 0 [io  0xc080-0xc0ff]
vm-test-run-update-hardware-configuration> target # [    0.528606] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]
vm-test-run-update-hardware-configuration> target # [    0.529634] pci 0000:00:05.0: BAR 4 [mem 0xe000000c000-0xe000000ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.531451] pci 0000:00:06.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.533606] pci 0000:00:06.0: BAR 0 [io  0xc1c0-0xc1df]
vm-test-run-update-hardware-configuration> target # [    0.534606] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]
vm-test-run-update-hardware-configuration> target # [    0.535634] pci 0000:00:06.0: BAR 4 [mem 0xe0000010000-0xe0000013fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.536606] pci 0000:00:06.0: ROM [mem 0xfeb80000-0xfebbffff pref]
vm-test-run-update-hardware-configuration> target # [    0.538572] pci 0000:00:07.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.540578] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]
vm-test-run-update-hardware-configuration> target # [    0.541566] pci 0000:00:07.0: BAR 4 [mem 0xe0000014000-0xe0000017fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.543505] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.545615] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]
vm-test-run-update-hardware-configuration> target # [    0.546634] pci 0000:00:08.0: BAR 4 [mem 0xe0000018000-0xe000001bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.548444] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.550430] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]
vm-test-run-update-hardware-configuration> target # [    0.551576] pci 0000:00:09.0: BAR 4 [mem 0xe000001c000-0xe000001ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.553440] pci 0000:00:0a.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.555451] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]
vm-test-run-update-hardware-configuration> target # [    0.556634] pci 0000:00:0a.0: BAR 4 [mem 0xe0000020000-0xe0000023fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.558438] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.560606] pci 0000:00:0b.0: BAR 0 [io  0xc100-0xc13f]
vm-test-run-update-hardware-configuration> target # [    0.561606] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]
vm-test-run-update-hardware-configuration> target # [    0.562633] pci 0000:00:0b.0: BAR 4 [mem 0xe0000024000-0xe0000027fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.564442] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.566606] pci 0000:00:0c.0: BAR 0 [io  0xc1e0-0xc1ff]
vm-test-run-update-hardware-configuration> target # [    0.567606] pci 0000:00:0c.0: BAR 1 [mem 0xfebdb000-0xfebdbfff]
vm-test-run-update-hardware-configuration> target # [    0.568633] pci 0000:00:0c.0: BAR 4 [mem 0xe0000028000-0xe000002bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.570461] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.572426] pci 0000:00:1d.0: BAR 4 [io  0xc200-0xc21f]
vm-test-run-update-hardware-configuration> target # [    0.573801] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.575225] pci 0000:00:1d.1: BAR 4 [io  0xc220-0xc23f]
vm-test-run-update-hardware-configuration> target # [    0.575844] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.577235] pci 0000:00:1d.2: BAR 4 [io  0xc240-0xc25f]
vm-test-run-update-hardware-configuration> target # [    0.577926] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.579354] pci 0000:00:1d.7: BAR 0 [mem 0xfebdc000-0xfebdcfff]
vm-test-run-update-hardware-configuration> target # [    0.579917] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.581061] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
vm-test-run-update-hardware-configuration> target # [    0.581922] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.583435] pci 0000:00:1f.2: BAR 4 [io  0xc260-0xc27f]
vm-test-run-update-hardware-configuration> target # [    0.584434] pci 0000:00:1f.2: BAR 5 [mem 0xfebdd000-0xfebddfff]
vm-test-run-update-hardware-configuration> target # [    0.586055] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.587230] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
vm-test-run-update-hardware-configuration> target # [    0.592386] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.593666] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.594709] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.595707] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.596730] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.597706] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.598711] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.599709] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.600639] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.601611] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.602612] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.603623] ACPI: PCI: Interrupt link GSID configured for IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.604608] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
vm-test-run-update-hardware-configuration> target # [    0.605608] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
vm-test-run-update-hardware-configuration> target # [    0.606611] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
vm-test-run-update-hardware-configuration> target # [    0.607613] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
vm-test-run-update-hardware-configuration> target # [    0.609424] iommu: Default domain type: Translated
vm-test-run-update-hardware-configuration> target # [    0.610364] iommu: DMA domain TLB invalidation policy: lazy mode
vm-test-run-update-hardware-configuration> target # [    0.610818] ACPI: bus type USB registered
vm-test-run-update-hardware-configuration> target # [    0.611667] usbcore: registered new interface driver usbfs
vm-test-run-update-hardware-configuration> target # [    0.612638] usbcore: registered new interface driver hub
vm-test-run-update-hardware-configuration> target # [    0.613608] usbcore: registered new device driver usb
vm-test-run-update-hardware-configuration> target # [    0.615437] NetLabel: Initializing
vm-test-run-update-hardware-configuration> target # [    0.616159] NetLabel:  domain hash size = 128
vm-test-run-update-hardware-configuration> target # [    0.616596] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
vm-test-run-update-hardware-configuration> target # [    0.617643] NetLabel:  unlabeled traffic allowed by default
vm-test-run-update-hardware-configuration> target # [    0.618608] PCI: Using ACPI for IRQ routing
vm-test-run-update-hardware-configuration> target # [    0.694154] pci 0000:00:01.0: vgaarb: setting as boot VGA device
vm-test-run-update-hardware-configuration> target # [    0.694592] pci 0000:00:01.0: vgaarb: bridge control possible
vm-test-run-update-hardware-configuration> target # [    0.694592] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vm-test-run-update-hardware-configuration> target # [    0.694599] vgaarb: loaded
vm-test-run-update-hardware-configuration> target # [    0.695409] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
vm-test-run-update-hardware-configuration> target # [    0.696379] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
vm-test-run-update-hardware-configuration> target # [    0.702678] clocksource: Switched to clocksource kvm-clock
vm-test-run-update-hardware-configuration> target # [    0.704369] VFS: Disk quotas dquot_6.6.0
vm-test-run-update-hardware-configuration> target # [    0.706877] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
vm-test-run-update-hardware-configuration> target # [    0.708450] pnp: PnP ACPI init
vm-test-run-update-hardware-configuration> target # [    0.709310] ACPI: IRQ 4 override to edge(!), high(!)
vm-test-run-update-hardware-configuration> target # [    0.710443] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
vm-test-run-update-hardware-configuration> target # [    0.712220] pnp: PnP ACPI: found 5 devices
vm-test-run-update-hardware-configuration> target # [    0.719329] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
vm-test-run-update-hardware-configuration> target # [    0.721070] clocksource: Switched to clocksource acpi_pm
vm-test-run-update-hardware-configuration> target # [    0.722250] NET: Registered PF_INET protocol family
vm-test-run-update-hardware-configuration> target # [    0.723760] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.736609] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.738398] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.739997] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.742411] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.743971] TCP: Hash tables configured (established 32768 bind 32768)
vm-test-run-update-hardware-configuration> target # [    0.745325] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.746872] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.748226] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.749792] NET: Registered PF_UNIX/PF_LOCAL protocol family
vm-test-run-update-hardware-configuration> target # [    0.750968] NET: Registered PF_XDP protocol family
vm-test-run-update-hardware-configuration> target # [    0.751986] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.753225] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.754488] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.755844] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.757192] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.758570] pci_bus 0000:00: resource 9 [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.760618] ACPI: \_SB_.GSIA: Enabled at IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.762600] ACPI: \_SB_.GSIB: Enabled at IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.764477] ACPI: \_SB_.GSIC: Enabled at IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.766301] ACPI: \_SB_.GSID: Enabled at IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.767993] PCI: CLS 0 bytes, default 64
vm-test-run-update-hardware-configuration> target # [    0.768917] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
vm-test-run-update-hardware-configuration> target # [    0.770282] Trying to unpack rootfs image as initramfs...
vm-test-run-update-hardware-configuration> target # [    0.776456] software IO TLB: mapped [mem 0x000000007a2e3000-0x000000007e2e3000] (64MB)
vm-test-run-update-hardware-configuration> target # [    0.778149] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d4d0b6d3, max_idle_ns: 440795255641 ns
vm-test-run-update-hardware-configuration> target # [    0.811791] Initialise system trusted keyrings
vm-test-run-update-hardware-configuration> target # [    0.814490] workingset: timestamp_bits=40 max_order=20 bucket_order=0
vm-test-run-update-hardware-configuration> target # [    0.829585] Key type asymmetric registered
vm-test-run-update-hardware-configuration> target # [    0.834461] Asymmetric key parser 'x509' registered
vm-test-run-update-hardware-configuration> target # [    0.835529] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
vm-test-run-update-hardware-configuration> target # [    0.839563] io scheduler mq-deadline registered
vm-test-run-update-hardware-configuration> target # [    0.840548] io scheduler kyber registered
vm-test-run-update-hardware-configuration> target # [    0.843920] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
vm-test-run-update-hardware-configuration> target # [    0.847462] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
vm-test-run-update-hardware-configuration> target # [    0.853131] Linux agpgart interface v0.103
vm-test-run-update-hardware-configuration> target # [    0.854114] ACPI: bus type drm_connector registered
vm-test-run-update-hardware-configuration> target # [    0.856836] usbcore: registered new interface driver usbserial_generic
vm-test-run-update-hardware-configuration> target # [    0.858156] usbserial: USB Serial support registered for generic
vm-test-run-update-hardware-configuration> target # [    0.861457] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.
vm-test-run-update-hardware-configuration> target # [    0.861457] Please enable it if your BIOS has the CPPC option.
vm-test-run-update-hardware-configuration> target # [    0.864128] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
vm-test-run-update-hardware-configuration> target # [    0.868562] drop_monitor: Initializing network drop monitor service
vm-test-run-update-hardware-configuration> target # [    0.869935] NET: Registered PF_INET6 protocol family
vm-test-run-update-hardware-configuration> target # [    0.873908] Segment Routing with IPv6
vm-test-run-update-hardware-configuration> target # [    0.877469] In-situ OAM (IOAM) with IPv6
vm-test-run-update-hardware-configuration> target # [    0.878631] IPI shorthand broadcast: enabled
vm-test-run-update-hardware-configuration> target # [    0.884240] sched_clock: Marking stable (701022431, 182418583)->(967793055, -84352041)
vm-test-run-update-hardware-configuration> target # [    0.890740] registered taskstats version 1
vm-test-run-update-hardware-configuration> target # [    0.891785] Loading compiled-in X.509 certificates
vm-test-run-update-hardware-configuration> target # [    0.908457] Demotion targets for Node 0: null
vm-test-run-update-hardware-configuration> target # [    0.909506] Key type .fscrypt registered
vm-test-run-update-hardware-configuration> target # [    0.910332] Key type fscrypt-provisioning registered
vm-test-run-update-hardware-configuration> target # [    0.913549] ima: No TPM chip found, activating TPM-bypass!
vm-test-run-update-hardware-configuration> target # [    0.914678] ima: Allocated hash algorithm: sha1
vm-test-run-update-hardware-configuration> target # [    0.917487] ima: No architecture policies found
vm-test-run-update-hardware-configuration> target # [    0.920464] PM:   Magic number: 14:159:234
vm-test-run-update-hardware-configuration> target # [    0.922291] RAS: Correctable Errors collector initialized.
vm-test-run-update-hardware-configuration> target # [    0.930201] clk: Disabling unused clocks
vm-test-run-update-hardware-configuration> target # [    0.933461] PM: genpd: Disabling unused power domains
vm-test-run-update-hardware-configuration> target # [    1.043020] Freeing initrd memory: 29620K
vm-test-run-update-hardware-configuration> target # [    1.045848] Freeing unused decrypted memory: 2028K
vm-test-run-update-hardware-configuration> target # [    1.048375] Freeing unused kernel image (initmem) memory: 3656K
vm-test-run-update-hardware-configuration> target # [    1.049700] Write protecting the kernel read-only data: 32768k
vm-test-run-update-hardware-configuration> target # [    1.051137] Freeing unused kernel image (text/rodata gap) memory: 304K
vm-test-run-update-hardware-configuration> target # [    1.052785] Freeing unused kernel image (rodata/data gap) memory: 692K
vm-test-run-update-hardware-configuration> target # [    1.084979] x86/mm: Checked W+X mappings: passed, no W+X pages found.
vm-test-run-update-hardware-configuration> target # [    1.086274] Run /init as init process
vm-test-run-update-hardware-configuration> target # [    1.095796] systemd[1]: Inserted module 'autofs4'
vm-test-run-update-hardware-configuration> target # [    1.110767] fuse: init (API version 7.45)
vm-test-run-update-hardware-configuration> target # [    1.116393] ACPI: \_SB_.GSIG: Enabled at IRQ 22
vm-test-run-update-hardware-configuration> target # [    1.118973] ACPI: \_SB_.GSIH: Enabled at IRQ 23
vm-test-run-update-hardware-configuration> target # [    1.122141] ACPI: \_SB_.GSIE: Enabled at IRQ 20
vm-test-run-update-hardware-configuration> target # [    1.124355] ACPI: \_SB_.GSIF: Enabled at IRQ 21
vm-test-run-update-hardware-configuration> target # [    1.130796] virtiofs virtio6: discovered new tag: nix-store
vm-test-run-update-hardware-configuration> target # [    1.132816] virtiofs virtio6: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.139604] virtiofs virtio7: discovered new tag: shared
vm-test-run-update-hardware-configuration> target # [    1.141594] virtiofs virtio7: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.152696] virtiofs virtio8: discovered new tag: xchg
vm-test-run-update-hardware-configuration> target # [    1.154655] virtiofs virtio8: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.172943] systemd[1]: Successfully made /usr/ read-only.
vm-test-run-update-hardware-configuration> target # [    1.509049] systemd[1]: systemd 261.3 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    1.514915] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    1.515970] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    1.517024] systemd[1]: Running in initrd.
vm-test-run-update-hardware-configuration> target # [    1.518182] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    1.519605] systemd[1]: Hostname set to <target>.
vm-test-run-update-hardware-configuration> target # [    1.574009] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    1.605006] systemd[1]: Queued start job for default target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    1.609623] systemd[1]: Created slice Slice /system/modprobe.
vm-test-run-update-hardware-configuration> target # [    1.611189] systemd[1]: Created slice Slice /system/systemd-makefs.
vm-test-run-update-hardware-configuration> target # [    1.612602] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    1.614264] systemd[1]: Expecting device /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    1.615369] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    1.616470] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    1.617553] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    1.618548] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    1.619713] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    1.621176] systemd[1]: Listening on Journal Socket (/dev/log).
vm-test-run-update-hardware-configuration> target # [    1.622583] systemd[1]: Listening on Journal Sockets.
vm-test-run-update-hardware-configuration> target # [    1.623781] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    1.625016] systemd[1]: Listening on udev Kernel Socket.
vm-test-run-update-hardware-configuration> target # [    1.626181] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    1.627963] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    1.634955] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    1.644952] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    1.649142] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    1.651903] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    1.657974] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    1.672538] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    1.677805] systemd-journald[65]: Collecting audit messages is disabled.
vm-test-run-update-hardware-configuration> target # [    1.681024] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    1.688908] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    1.695985] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config
vm-test-run-update-hardware-configuration> target # [    1.699854] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
vm-test-run-update-hardware-configuration> target # [    1.706101] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    1.710462] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
vm-test-run-update-hardware-configuration> target # [    1.741067] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    1.747588] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    1.758578] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    1.769604] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    1.781835] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    1.793065] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    1.797711] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    1.802516] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    1.809502] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    1.833544] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    1.654246] systemd-modules-load[66]: Inserted module 'dm_mod'
vm-test-run-update-hardware-configuration> target # [    1.655967] systemd-modules-load[66]: Inserted module 'virtio_balloon'
vm-test-run-update-hardware-configuration> target # [    1.660361] systemd-modules-load[66]: Inserted module 'virtio_gpu'
vm-test-run-update-hardware-configuration> target # [    1.665307] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    1.683255] systemd-udevd[73]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    1.695870] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    1.715076] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    1.732145] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    1.734664] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    1.735700] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    2.109262] virtio_blk virtio2: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.135949] virtio_blk virtio2: [vda] 16777216 512-byte logical blocks (8.59 GB/8.00 GiB)
vm-test-run-update-hardware-configuration> target # [    2.154612] ehci-pci 0000:00:1d.7: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.155473] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
vm-test-run-update-hardware-configuration> target # [    2.157318] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdc000
vm-test-run-update-hardware-configuration> target # [    2.160191] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
vm-test-run-update-hardware-configuration> target # [    2.164456] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
vm-test-run-update-hardware-configuration> target # [    2.165793] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.167062] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.170297] usb usb1: Product: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.171204] usb usb1: Manufacturer: Linux 6.18.55 ehci_hcd
vm-test-run-update-hardware-configuration> target # [    2.172457] usb usb1: SerialNumber: 0000:00:1d.7
vm-test-run-update-hardware-configuration> target # [    2.174515] hub 1-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.176228] hub 1-0:1.0: 6 ports detected
vm-test-run-update-hardware-configuration> target # [    2.183225] uhci_hcd 0000:00:1d.0: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.184086] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
vm-test-run-update-hardware-configuration> target # [    2.186548] serio: i8042 KBD port at 0x60,0x64 irq 1
vm-test-run-update-hardware-configuration> target # [    2.187339] serio: i8042 AUX port at 0x60,0x64 irq 12
vm-test-run-update-hardware-configuration> target # [    2.190804] virtio_blk virtio3: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.199346] virtio_blk virtio3: [vdb] 1048576 512-byte logical blocks (537 MB/512 MiB)
vm-test-run-update-hardware-configuration> target # [    2.208461] uhci_hcd 0000:00:1d.0: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.209338] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200
vm-test-run-update-hardware-configuration> target # [    2.220655] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.221927] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.061196] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    2.064107] (udev-worker)[92]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.068440] (udev-worker)[88]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.252268] usb usb2: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.254979] SCSI subsystem initialized
vm-test-run-update-hardware-configuration> target # [    2.095377] systemd-vconsole-setup[104]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [    2.099216] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    2.283107] usb usb2: Manufacturer: Linux 6.18.55 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.288207] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
vm-test-run-update-hardware-configuration> target # [    2.294625] usb usb2: SerialNumber: 0000:00:1d.0
vm-test-run-update-hardware-configuration> target # [    2.302511] hub 2-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.305439] hub 2-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.131648] systemd[1]: Found device /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.317308] uhci_hcd 0000:00:1d.1: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.318164] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
vm-test-run-update-hardware-configuration> target # [    2.138723] systemd[1]: Reached target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    2.139946] systemd[1]: Starting Make File System on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.334479] uhci_hcd 0000:00:1d.1: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.339036] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220
vm-test-run-update-hardware-configuration> target # [    2.340822] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.344472] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.346468] usb usb3: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.347275] usb usb3: Manufacturer: Linux 6.18.55 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.350469] usb usb3: SerialNumber: 0000:00:1d.1
vm-test-run-update-hardware-configuration> target # [    2.173272] systemd-makefs[110]: Formatting /dev/vdb as ext4
vm-test-run-update-hardware-configuration> target # [    2.358473] hub 3-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.360524] hub 3-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.368135] uhci_hcd 0000:00:1d.2: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.369031] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
vm-test-run-update-hardware-configuration> target # [    2.374125] uhci_hcd 0000:00:1d.2: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.375360] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240
vm-test-run-update-hardware-configuration> target # [    2.377596] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.380160] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
vm-test-run-update-hardware-configuration> target # [    2.381462] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.383029] usb usb4: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.383948] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
vm-test-run-update-hardware-configuration> target # [    2.385184] usb usb4: Manufacturer: Linux 6.18.55 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.386175] ahci 0000:00:1f.2: flags: 64bit ncq only
vm-test-run-update-hardware-configuration> target # [    2.387231] usb usb4: SerialNumber: 0000:00:1d.2
vm-test-run-update-hardware-configuration> target # [    2.391612] hub 4-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.393321] hub 4-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.394140] scsi host0: ahci
vm-test-run-update-hardware-configuration> target # [    2.398639] scsi host1: ahci
vm-test-run-update-hardware-configuration> target # [    2.400948] scsi host2: ahci
vm-test-run-update-hardware-configuration> target # [    2.405147] scsi host3: ahci
vm-test-run-update-hardware-configuration> target # [    2.410882] scsi host4: ahci
vm-test-run-update-hardware-configuration> target # [    2.415000] scsi host5: ahci
vm-test-run-update-hardware-configuration> target # [    2.417549] ata1: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd100 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.421458] usb 1-1: new high-speed USB device number 2 using ehci-pci
vm-test-run-update-hardware-configuration> target # [    2.425948] ata2: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd180 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.427235] ata3: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd200 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.428870] ata4: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd280 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.430350] ata5: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd300 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.431819] ata6: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd380 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.295594] systemd-makefs[110]: /dev/vdb successfully formatted as ext4 (label "vdb", uuid 2dd2bf75-3572-49eb-bd11-86574a5e7333)
vm-test-run-update-hardware-configuration> target # [    2.298855] systemd[1]: Finished Make File System on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.303086] systemd[1]: Starting File System Check on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.324581] systemd-fsck[140]: vdb: clean, 12/32768 files, 6385/131072 blocks
vm-test-run-update-hardware-configuration> target # [    2.331169] systemd[1]: Finished File System Check on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.552357] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
vm-test-run-update-hardware-configuration> target # [    2.553666] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
vm-test-run-update-hardware-configuration> target # [    2.555115] usb 1-1: Product: QEMU USB Tablet
vm-test-run-update-hardware-configuration> target # [    2.555943] usb 1-1: Manufacturer: QEMU
vm-test-run-update-hardware-configuration> target # [    2.556698] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1
vm-test-run-update-hardware-configuration> target # [    2.571054] hid: raw HID events driver (C) Jiri Kosina
vm-test-run-update-hardware-configuration> target # [    2.486937] systemd[1]: Mounting /sysroot...
vm-test-run-update-hardware-configuration> target # [    2.748191] ata1: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.749462] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.750507] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
vm-test-run-update-hardware-configuration> target # [    2.751380] ata3.00: applying bridge limits
vm-test-run-update-hardware-configuration> target # [    2.752541] ata3.00: configured for UDMA/100
vm-test-run-update-hardware-configuration> target # [    2.753630] ata4: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.754681] ata2: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.755850] ata6: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.756977] ata5: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.758201] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
vm-test-run-update-hardware-configuration> target # [    2.802571] usbcore: registered new interface driver usbhid
vm-test-run-update-hardware-configuration> target # [    2.809432] usbhid: USB HID core driver
vm-test-run-update-hardware-configuration> target # [    2.826612] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2
vm-test-run-update-hardware-configuration> target # [    2.833906] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
vm-test-run-update-hardware-configuration> target # [    2.836394] EXT4-fs (vdb): mounted filesystem 2dd2bf75-3572-49eb-bd11-86574a5e7333 r/w with ordered data mode. Quota mode: none.
vm-test-run-update-hardware-configuration> target # [    2.846432] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
vm-test-run-update-hardware-configuration> target # [    2.676122] systemd[1]: Mounted /sysroot.
vm-test-run-update-hardware-configuration> target # [    2.678493] systemd[1]: Reached target Initrd Root File System.
vm-test-run-update-hardware-configuration> target # [    2.862520] cdrom: Uniform CD-ROM driver Revision: 3.20
vm-test-run-update-hardware-configuration> target # [    2.681434] systemd[1]: Starting Mountpoints Configured in the Real Root...
vm-test-run-update-hardware-configuration> target # [    2.695097] systemd-sysroot-fstab-check[150]: /sysroot should be mounted in the initrd, will request daemon-reload.
vm-test-run-update-hardware-configuration> target # [    2.698821] systemd[1]: Reload requested from client PID 150 ('systemd-sysroot') (unit initrd-parse-etc.service)...
vm-test-run-update-hardware-configuration> target # [    2.701174] systemd[1]: Reloading...
vm-test-run-update-hardware-configuration> target # [    2.778674] systemd[1]: Reloading finished in 77 ms.
vm-test-run-update-hardware-configuration> target # [    2.786551] systemd-sysroot-fstab-check[150]: Requesting initrd-fs.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    2.791294] systemd-sysroot-fstab-check[150]: Requesting swap.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    2.795843] systemd[1]: initrd-parse-etc.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    2.798054] systemd[1]: Finished Mountpoints Configured in the Real Root.
vm-test-run-update-hardware-configuration> target # [    2.799259] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.
vm-test-run-update-hardware-configuration> target # [    3.487923] systemd[1]: Mounting /sysroot/nix/.ro-store...
vm-test-run-update-hardware-configuration> target # [    3.491645] systemd[1]: Mounting /sysroot/nix/.rw-store...
vm-test-run-update-hardware-configuration> target # [    3.493135] systemd[1]: Mounting /sysroot/run...
vm-test-run-update-hardware-configuration> target # [    3.497632] systemd[1]: Mounting /sysroot/tmp/shared...
vm-test-run-update-hardware-configuration> target # [    3.503269] systemd[1]: Mounting /sysroot/tmp/xchg...
vm-test-run-update-hardware-configuration> target # [    3.526745] systemd[1]: Mounted /sysroot/nix/.ro-store.
vm-test-run-update-hardware-configuration> target # [    3.528241] systemd[1]: Mounted /sysroot/nix/.rw-store.
vm-test-run-update-hardware-configuration> target # [    3.530865] systemd[1]: Mounted /sysroot/run.
vm-test-run-update-hardware-configuration> target # [    3.533826] systemd[1]: Mounted /sysroot/tmp/shared.
vm-test-run-update-hardware-configuration> target # [    3.535184] systemd[1]: Mounted /sysroot/tmp/xchg.
vm-test-run-update-hardware-configuration> target # [    3.538460] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    3.548540] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.550486] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    3.552832] systemd[1]: Mounting /sysroot/nix/store...
vm-test-run-update-hardware-configuration> target # [    3.571435] systemd[1]: Mounted /sysroot/nix/store.
vm-test-run-update-hardware-configuration> target # [    3.573363] systemd[1]: Reached target Initrd File Systems.
vm-test-run-update-hardware-configuration> target # [    3.575556] systemd[1]: Starting Find NixOS closure...
vm-test-run-update-hardware-configuration> target # [    3.578550] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...
vm-test-run-update-hardware-configuration> target # [    3.596371] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.601644] systemd[1]: Finished Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    3.603001] systemd[1]: Reached target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    3.604964] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...
vm-test-run-update-hardware-configuration> target # [    3.617855] systemd[1]: Stopped target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    3.619260] systemd[1]: Stopped target Basic System.
vm-test-run-update-hardware-configuration> target # [    3.621164] systemd[1]: Stopped target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    3.622193] systemd[1]: Stopped target Path Units.
vm-test-run-update-hardware-configuration> target # [    3.623206] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.624490] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    3.626217] systemd[1]: Stopped target Slice Units.
vm-test-run-update-hardware-configuration> target # [    3.627439] systemd[1]: Stopped target Socket Units.
vm-test-run-update-hardware-configuration> target # [    3.628828] systemd[1]: Stopped target System Initialization.
vm-test-run-update-hardware-configuration> target # [    3.630280] systemd[1]: Stopped target Swaps.
vm-test-run-update-hardware-configuration> target # [    3.632143] systemd[1]: Stopped target Timer Units.
vm-test-run-update-hardware-configuration> target # [    3.633152] systemd[1]: dbus.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.634216] systemd[1]: Closed D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    3.635283] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.636667] systemd[1]: Stopped Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    3.637906] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    3.639149] systemd[1]: systemd-sysctl.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.641219] systemd[1]: Stopped Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    3.642446] systemd[1]: systemd-modules-load.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.643933] systemd[1]: Stopped Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    3.645862] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.647802] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.649137] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.650382] systemd[1]: Stopped Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    3.651779] systemd[1]: Stopped target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    3.654713] systemd[1]: Stopped target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    3.655876] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.657124] systemd[1]: Stopped Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    3.659785] systemd[1]: Stopping Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    3.661093] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.662325] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    3.667555] systemd[1]: initrd-cleanup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.672110] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.
vm-test-run-update-hardware-configuration> target # [    3.678804] systemd[1]: systemd-udevd.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.681354] systemd[1]: Stopped Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    3.683720] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.685147] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    3.687163] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.688399] systemd[1]: Closed udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    3.689912] systemd[1]: Starting Cleanup udev Database...
vm-test-run-update-hardware-configuration> target # [    3.691172] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.693146] systemd[1]: Stopped Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    3.694292] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.695682] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    3.696991] systemd[1]: kmod-static-nodes.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.698615] systemd[1]: Stopped Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    3.712330] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.714396] systemd[1]: Finished Cleanup udev Database.
vm-test-run-update-hardware-configuration> target # [    3.715946] systemd[1]: Reached target Switch Root.
vm-test-run-update-hardware-configuration> target # [    3.718090] systemd[1]: Starting NixOS Activation...
vm-test-run-update-hardware-configuration> target # [    3.764840] initrd-nixos-activation-start[202]: booting system configuration /nix/store/mrxxqnwd7xv6zgys05dixzj6icyshfvb-nixos-system-target-test
vm-test-run-update-hardware-configuration> target # [    3.784635] initrd-nixos-activation-start[202]: running activation script...
vm-test-run-update-hardware-configuration> target # [    3.933592] initrd-nixos-activation-start[225]: setting up /etc...
vm-test-run-update-hardware-configuration> target # [    4.015720] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.017263] systemd[1]: Finished NixOS Activation.
vm-test-run-update-hardware-configuration> target # [    4.019339] systemd[1]: Starting Switch Root...
vm-test-run-update-hardware-configuration> target # [    4.029272] systemd[1]: Switching root.
vm-test-run-update-hardware-configuration> target # [    4.336157] systemd-journald[65]: Received SIGTERM from PID 1 (systemd).
vm-test-run-update-hardware-configuration> target: waiting for TCP port 22 on localhost
vm-test-run-update-hardware-configuration> target: waiting for the VM to finish booting
vm-test-run-update-hardware-configuration> target # [    7.964646] NET: Registered PF_VSOCK protocol family
vm-test-run-update-hardware-configuration> target # [    8.325906] systemd[1]: systemd 261.3 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    8.330270] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    8.331119] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    8.332010] systemd[1]: Detected first boot.
vm-test-run-update-hardware-configuration> target # [    8.333667] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    8.429189] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    8.481654] systemd[1]: Applying preset policy.
vm-test-run-update-hardware-configuration> target # [    8.616659] systemd[1]: Populated /etc with preset unit settings.
vm-test-run-update-hardware-configuration> target # [    8.785526] systemd[1]: initrd-switch-root.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    8.787142] systemd[1]: Stopped initrd-switch-root.service.
vm-test-run-update-hardware-configuration> target # [    8.789838] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
vm-test-run-update-hardware-configuration> target # [    8.792059] systemd[1]: Created slice Slice /system/getty.
vm-test-run-update-hardware-configuration> target # [    8.793525] systemd[1]: Created slice User and Session Slice.
vm-test-run-update-hardware-configuration> target # [    8.794607] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    8.795989] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
vm-test-run-update-hardware-configuration> target # [    8.797251] systemd[1]: Expecting device /dev/hvc0...
vm-test-run-update-hardware-configuration> target # [    8.798132] systemd[1]: Expecting device /dev/ttyS0...
vm-test-run-update-hardware-configuration> target # [    8.799067] systemd[1]: Reached target Local Encrypted Volumes.
vm-test-run-update-hardware-configuration> target # [    8.800067] systemd[1]: Stopped target initrd-fs.target.
vm-test-run-update-hardware-configuration> target # [    8.800978] systemd[1]: Stopped target initrd-root-fs.target.
vm-test-run-update-hardware-configuration> target # [    8.801932] systemd[1]: Stopped target initrd-switch-root.target.
vm-test-run-update-hardware-configuration> target # [    8.802960] systemd[1]: Reached target Virtual Machines and Containers.
vm-test-run-update-hardware-configuration> target # [    8.804059] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    8.804920] systemd[1]: Reached target Remote File Systems.
vm-test-run-update-hardware-configuration> target # [    8.805875] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    8.806751] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    8.808535] systemd[1]: Listening on Query the User Interactively for a Password.
vm-test-run-update-hardware-configuration> target # [    8.810938] systemd[1]: Listening on Process Core Dump Socket.
vm-test-run-update-hardware-configuration> target # [    8.812710] systemd[1]: Listening on Credential Encryption/Decryption.
vm-test-run-update-hardware-configuration> target # [    8.814591] systemd[1]: Listening on Factory Reset Management.
vm-test-run-update-hardware-configuration> target # [    8.815679] systemd[1]: Listening on Hostname Service Socket.
vm-test-run-update-hardware-configuration> target # [    8.818289] systemd[1]: Starting Journal Log Access Socket...
vm-test-run-update-hardware-configuration> target # [    8.819917] systemd[1]: Listening on Journal Audit Socket.
vm-test-run-update-hardware-configuration> target # [    8.822527] systemd[1]: Listening on Console Output Muting Service Socket.
vm-test-run-update-hardware-configuration> target # [    8.823788] systemd[1]: Listening on Network Management Metrics Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    8.825164] systemd[1]: Listening on Network Management Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    8.826387] systemd[1]: Listening on Network Management Netlink Socket.
vm-test-run-update-hardware-configuration> target # [    8.827608] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
vm-test-run-update-hardware-configuration> target # [    8.828893] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    8.830402] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
vm-test-run-update-hardware-configuration> target # [    8.834151] systemd[1]: Listening on Disk Repartitioning Service Socket.
vm-test-run-update-hardware-configuration> target # [    8.835344] systemd[1]: Listening on Resolve Monitor Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    8.836514] systemd[1]: Listening on Resolve Service Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    8.837658] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    8.838687] systemd[1]: Listening on udev Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    8.840904] systemd[1]: Mounting Huge Pages File System...
vm-test-run-update-hardware-configuration> target # [    8.843718] systemd[1]: Mounting POSIX Message Queue File System...
vm-test-run-update-hardware-configuration> target # [    8.849595] systemd[1]: Mounting Kernel Debug File System...
vm-test-run-update-hardware-configuration> target # [    8.856687] systemd[1]: Mounting Kernel Trace File System...
vm-test-run-update-hardware-configuration> target # [    8.866002] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    8.878713] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    8.884775] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
vm-test-run-update-hardware-configuration> target # [    8.893708] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore
vm-test-run-update-hardware-configuration> target # [    8.897494] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [    8.911455] systemd[1]: Mounting FUSE Control File System...
vm-test-run-update-hardware-configuration> target # [    8.913472] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
vm-test-run-update-hardware-configuration> target # [    8.918916] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    8.925150] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    8.935901] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...
vm-test-run-update-hardware-configuration> target # [    8.943449] systemd[1]: Starting Remount Root and Kernel File Systems...
vm-test-run-update-hardware-configuration> target # [    8.945546] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    8.958574] systemd-journald[295]: Collecting audit messages is enabled.
vm-test-run-update-hardware-configuration> target # [    8.960045] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    8.970858] systemd[1]: Listening on Journal Log Access Socket.
vm-test-run-update-hardware-configuration> target # [    8.977158] systemd[1]: Mounted Huge Pages File System.
vm-test-run-update-hardware-configuration> target # [    8.981290] loop: module loaded
vm-test-run-update-hardware-configuration> target # [    8.982554] systemd[1]: Mounted POSIX Message Queue File System.
vm-test-run-update-hardware-configuration> target # [    8.989585] systemd[1]: Mounted Kernel Debug File System.
vm-test-run-update-hardware-configuration> target # [    8.997709] systemd[1]: Mounted Kernel Trace File System.
vm-test-run-update-hardware-configuration> target # [    9.006449] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    8.825697] systemd[1]: Queued start job for default target Multi-User System.
vm-test-run-update-hardware-configuration> target # [    9.013112] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    8.832039] systemd[1]: Unnecessary job was removed for /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    8.833493] systemd[1]: systemd-journald.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    8.836858] systemd-modules-load[296]: Inserted module 'loop'
vm-test-run-update-hardware-configuration> target # [    8.840396] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.028454] EXT4-fs (vdb): re-mounted 2dd2bf75-3572-49eb-bd11-86574a5e7333.
vm-test-run-update-hardware-configuration> target # [    8.848300] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    8.850404] systemd[1]: Mounted FUSE Control File System.
vm-test-run-update-hardware-configuration> target # [    8.853476] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    8.859854] systemd[1]: Finished Remount Root and Kernel File Systems.
vm-test-run-update-hardware-configuration> target # [    8.866605] systemd[1]: Listening on Disk Image Download Service Socket.
vm-test-run-update-hardware-configuration> target # [    8.871170] systemd[1]: Mounting Kernel Configuration File System...
vm-test-run-update-hardware-configuration> target # [    8.875647] systemd-oomd[298]: No swap; memory pressure usage will be degraded
vm-test-run-update-hardware-configuration> target # [    8.881077] systemd[1]: Starting Firewall...
vm-test-run-update-hardware-configuration> target # [    8.887562] systemd[1]: Starting Flush Journal to Persistent Storage...
vm-test-run-update-hardware-configuration> target # [    8.889075] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore
vm-test-run-update-hardware-configuration> target # [    8.895072] systemd[1]: Starting Load/Save OS Random Seed...
vm-test-run-update-hardware-configuration> target # [    8.906143] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    8.922726] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    8.924858] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    8.926377] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.
vm-test-run-update-hardware-configuration> target # [    9.159075] systemd-journald[295]: Received client request to flush runtime journal.
vm-test-run-update-hardware-configuration> target # [    9.218743] systemd[1]: Mounted Kernel Configuration File System.
vm-test-run-update-hardware-configuration> target # [    9.222570] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    9.226629] systemd[1]: Starting Network Name Resolution...
vm-test-run-update-hardware-configuration> target # [    9.231453] systemd[1]: Finished Load/Save OS Random Seed.
vm-test-run-update-hardware-configuration> target # [    9.233486] systemd[1]: Reached target First Boot Complete.
vm-test-run-update-hardware-configuration> target # [    9.235141] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    9.236717] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    9.241107] systemd-resolved[324]: Positive Trust Anchors:
vm-test-run-update-hardware-configuration> target # [    9.242301] systemd-resolved[324]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
vm-test-run-update-hardware-configuration> target # [    9.245272] systemd-resolved[324]: . IN DS 38696 8 2 683d2d0acb8c9b712a1948b27f741219298d0a450d612c483af444a4c0fb2b16
vm-test-run-update-hardware-configuration> target # [    9.249147] systemd-resolved[324]: Negative trust anchors: home.arpa 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 170.0.0.192.in-addr.arpa 171.0.0.192.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa ipv4only.arpa resolver.arpa corp home internal intranet lan local private test
vm-test-run-update-hardware-configuration> target # [    9.262209] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    9.263370] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    9.264577] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    9.267194] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    9.268238] systemd[1]: Finished Flush Journal to Persistent Storage.
vm-test-run-update-hardware-configuration> target # [    9.280197] systemd-resolved[324]: Using system hostname 'target'.
vm-test-run-update-hardware-configuration> target # [    9.283871] systemd[1]: Started Network Name Resolution.
vm-test-run-update-hardware-configuration> target # [    9.295374] systemd-udevd[336]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    9.337110] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    9.464746] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [    9.540192] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.
vm-test-run-update-hardware-configuration> target # [    9.600351] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.
vm-test-run-update-hardware-configuration> target # [    9.607320] systemd[1]: Mounting /run/wrappers...
vm-test-run-update-hardware-configuration> target # [    9.625298] (udev-worker)[376]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    9.635086] (udev-worker)[380]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    9.643827] systemd[1]: Mounted /run/wrappers.
vm-test-run-update-hardware-configuration> target # [    9.646734] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    9.649424] systemd[1]: Listening on Boot Loader Control Service Socket.
vm-test-run-update-hardware-configuration> target # [    9.654114] systemd[1]: Starting register-nix-paths.service...
vm-test-run-update-hardware-configuration> target # [    9.658357] systemd[1]: Starting Create SUID/SGID Wrappers...
vm-test-run-update-hardware-configuration> target # [    9.659568] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.
vm-test-run-update-hardware-configuration> target # [    9.672134] systemd[1]: Starting Save Transient machine-id to Disk...
vm-test-run-update-hardware-configuration> target # [    9.682574] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    9.812779] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    9.824228] systemd[1]: Starting Rebuild Journal Catalog...
vm-test-run-update-hardware-configuration> target # [    9.830852] systemd[1]: Starting Record System Boot/Shutdown in UTMP...
vm-test-run-update-hardware-configuration> target # [    9.922273] systemd[1]: Finished Record System Boot/Shutdown in UTMP.
vm-test-run-update-hardware-configuration> target # [    9.950592] systemd[1]: Finished Rebuild Journal Catalog.
vm-test-run-update-hardware-configuration> target # [    9.957659] systemd[1]: Starting Update is Completed...
vm-test-run-update-hardware-configuration> target # [   10.012957] systemd[1]: Finished Update is Completed.
vm-test-run-update-hardware-configuration> target # [   10.231264] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
vm-test-run-update-hardware-configuration> target # [   10.268116] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console
vm-test-run-update-hardware-configuration> target # [   10.316509] ACPI: button: Power Button [PWRF]
vm-test-run-update-hardware-configuration> target # [   10.143368] systemd[1]: Finished Firewall.
vm-test-run-update-hardware-configuration> target # [   10.144352] systemd[1]: Reached target Preparation for Network.
vm-test-run-update-hardware-configuration> target # [   10.145487] systemd[1]: Listening on Network Management Resolve Hook Socket.
vm-test-run-update-hardware-configuration> target # [   10.151300] systemd[1]: Starting Network Management...
vm-test-run-update-hardware-configuration> target # [   10.241885] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   10.245318] systemd[1]: Finished Create SUID/SGID Wrappers.
vm-test-run-update-hardware-configuration> target # [   10.305873] systemd-resolved[324]: Clock change detected. Flushing caches.
vm-test-run-update-hardware-configuration> target # [   10.436963] mousedev: PS/2 mouse device common for all mice
vm-test-run-update-hardware-configuration> target # [   10.468896] rtc_cmos PNP0B00:00: RTC can wake from S4
vm-test-run-update-hardware-configuration> target # [   10.372218] systemd[1]: Finished register-nix-paths.service.
vm-test-run-update-hardware-configuration> target # [   10.374562] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [   10.378463] systemd[1]: Started Discard unused filesystem blocks once a week.
vm-test-run-update-hardware-configuration> target # [   10.379723] systemd[1]: Started Daily Cleanup of Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   10.382815] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [   10.384429] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   10.386278] systemd[1]: Listening on Nix Daemon Socket.
vm-test-run-update-hardware-configuration> target # [   10.389075] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).
vm-test-run-update-hardware-configuration> target # [   10.390655] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.
vm-test-run-update-hardware-configuration> target # [   10.392859] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [   10.393816] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   10.398175] systemd[1]: Started backdoor.service.
vm-test-run-update-hardware-configuration> target # [   10.400868] systemd[1]: Starting Import lastlog data into lastlog2 database...
vm-test-run-update-hardware-configuration> target # [   10.404068] systemd[1]: Starting Name Service Cache Daemon (nsncd)...
vm-test-run-update-hardware-configuration> target # [   10.476039] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
vm-test-run-update-hardware-configuration> target # [   10.487579] rtc_cmos PNP0B00:00: registered as rtc0
vm-test-run-update-hardware-configuration> target # [   10.411092] systemd[1]: Starting Post-Boot Actions...
vm-test-run-update-hardware-configuration> target # [   10.487680] rtc_cmos PNP0B00:00: setting system clock to 2026-10-05T15:13:35 UTC (1791213215)
vm-test-run-update-hardware-configuration> target # [   10.487772] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
vm-test-run-update-hardware-configuration> target # [   10.428421] systemd[1]: Started Reset console on configuration changes.
vm-test-run-update-hardware-configuration> target # [   10.438565] systemd[1]: Starting SSH Host Keys Generation...
vm-test-run-update-hardware-configuration> target # [   10.492489] systemd-journald[295]: Time jumped backwards, rotating.
vm-test-run-update-hardware-configuration> target # [   10.495482] Console: switching to colour dummy device 80x25
vm-test-run-update-hardware-configuration> target # [   10.559104] cfg80211: Loading compiled-in X.509 certificates for regulatory database
vm-test-run-update-hardware-configuration> target # [   10.499351] systemd-networkd[516]: lo: Link UP
vm-test-run-update-hardware-configuration> target # [   10.500429] systemd-networkd[516]: lo: Gained carrier
vm-test-run-update-hardware-configuration> target # [   10.504273] systemd[1]: Starting D-Bus System Message Bus...
vm-test-run-update-hardware-configuration> target # connecting to host...
vm-test-run-update-hardware-configuration> target # [   10.520561] systemd[1]: Finished Post-Boot Actions.
vm-test-run-update-hardware-configuration> target # [   10.521655] systemd[1]: Started Network Management.
vm-test-run-update-hardware-configuration> target # [   10.526910] systemd-networkd[516]: eth0: Configuring with /etc/systemd/network/99-ethernet-default-dhcp.network.
vm-test-run-update-hardware-configuration> target # [   10.531551] systemd-networkd[516]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [   10.537001] systemd-networkd[516]: eth1: Configuring with /etc/systemd/network/40-eth1.network.
vm-test-run-update-hardware-configuration> target # [   10.538656] systemd-networkd[516]: eth0: Link UP
vm-test-run-update-hardware-configuration> target # [   10.545531] nsncd[532]: Oct 05 15:13:35.738 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"
vm-test-run-update-hardware-configuration> target # [   10.549462] systemd[1]: Started Name Service Cache Daemon (nsncd).
vm-test-run-update-hardware-configuration> target # [   10.552176] systemd-networkd[516]: eth0: Gained carrier
vm-test-run-update-hardware-configuration> target: Guest shell says: b'Spawning backdoor root shell...\n'
vm-test-run-update-hardware-configuration> target: connected to guest root shell
vm-test-run-update-hardware-configuration> target: (connecting took 5.47 seconds)
vm-test-run-update-hardware-configuration> target: (finished: waiting for the VM to finish booting, in 5.47 seconds)
vm-test-run-update-hardware-configuration> target # [   10.576338] systemd[1]: Reached target Network.
vm-test-run-update-hardware-configuration> target # [   10.586272] systemd[1]: Reached target Host and Network Name Lookups.
vm-test-run-update-hardware-configuration> target # [   10.587788] systemd[1]: Reached target User and Group Name Lookups.
vm-test-run-update-hardware-configuration> target # [   10.606121] systemd-networkd[516]: eth1: Link UP
vm-test-run-update-hardware-configuration> target # [   10.609530] systemd[1]: Starting User Login Management...
vm-test-run-update-hardware-configuration> target # [   10.616449] systemd-networkd[516]: eth1: Gained carrier
vm-test-run-update-hardware-configuration> target # [   10.617792] systemd-networkd[516]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [   10.621744] systemd-networkd[516]: eth0: DHCPv4 address 10.0.2.15/24, gateway 10.0.2.2 acquired from 10.0.2.2
vm-test-run-update-hardware-configuration> target # [   10.628660] systemd[1]: Starting Enable Persistent Storage in systemd-networkd...
vm-test-run-update-hardware-configuration> target # [   10.579218] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:07.0/virtio5/input/input4
vm-test-run-update-hardware-configuration> target # [   10.584839] parport_pc 00:02: reported by Plug and Play ACPI
vm-test-run-update-hardware-configuration> target # [   10.648558] systemd[1]: Starting Permit User Sessions...
vm-test-run-update-hardware-configuration> target # [   10.660546] systemd[1]: Finished Import lastlog data into lastlog2 database.
vm-test-run-update-hardware-configuration> target # [   10.584938] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
vm-test-run-update-hardware-configuration> target # [   10.626033] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
vm-test-run-update-hardware-configuration> target # [   10.626123] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
vm-test-run-update-hardware-configuration> target # [   10.743178] dbus-broker-launch[543]: Looking up NSS user entry for 'systemd-timesync'...
vm-test-run-update-hardware-configuration> target # [   10.746034] dbus-broker-launch[543]: NSS returned no entry for 'systemd-timesync'
vm-test-run-update-hardware-configuration> target # [   10.750278] dbus-broker-launch[543]: Invalid user-name in /nix/store/51x0c8ylcaad7h27kyrjvmsg913rnmkc-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"
vm-test-run-update-hardware-configuration> target # [   10.788240] systemd[1]: Started D-Bus System Message Bus.
vm-test-run-update-hardware-configuration> target # [   10.627175] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
vm-test-run-update-hardware-configuration> target # [   10.627180] cfg80211: failed to load regulatory.db
vm-test-run-update-hardware-configuration> target # [   10.806193] systemd[1]: Finished Permit User Sessions.
vm-test-run-update-hardware-configuration> target # [   10.829618] dbus-broker-launch[543]: Ready
vm-test-run-update-hardware-configuration> target # [   10.767393] NET: Registered PF_PACKET protocol family
vm-test-run-update-hardware-configuration> target # [   10.772763] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
vm-test-run-update-hardware-configuration> target # [   10.772886] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
vm-test-run-update-hardware-configuration> target # [   10.938066] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6
vm-test-run-update-hardware-configuration> target # [   10.940312] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5
vm-test-run-update-hardware-configuration> target # [   11.171120] [drm] Found bochs VGA, ID 0xb0c5.
vm-test-run-update-hardware-configuration> target # [   11.171124] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
vm-test-run-update-hardware-configuration> target # [   10.992316] systemd[1]: Started Getty on tty1.
vm-test-run-update-hardware-configuration> target # [   10.996551] systemd[1]: Reached target Login Prompts.
vm-test-run-update-hardware-configuration> target # [   10.997893] systemd-logind[568]: New seat seat0.
vm-test-run-update-hardware-configuration> target # [   11.003421] systemd[1]: Finished Enable Persistent Storage in systemd-networkd.
vm-test-run-update-hardware-configuration> target # [   11.005204] systemd-logind[568]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)
vm-test-run-update-hardware-configuration> target # [   11.008221] systemd[1]: Started User Login Management.
vm-test-run-update-hardware-configuration> target # [   11.201010] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic
vm-test-run-update-hardware-configuration> target # [   11.202011] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0
vm-test-run-update-hardware-configuration> target # [   11.042835] systemd-logind[568]: Watching system buttons on /dev/input/event2 (Power Button)
vm-test-run-update-hardware-configuration> target # [   11.049468] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
vm-test-run-update-hardware-configuration> target # [   11.054700] systemd[1]: Starting linger-users.service...
vm-test-run-update-hardware-configuration> target # [   11.056594] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   11.272863] iTCO_wdt iTCO_wdt.0.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
vm-test-run-update-hardware-configuration> target # [   11.092518] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   11.094519] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   11.100082] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   11.145088] systemd[1]: linger-users.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   11.149533] systemd[1]: Finished linger-users.service.
vm-test-run-update-hardware-configuration> target # [   11.363487] ppdev: user-space parallel port driver
vm-test-run-update-hardware-configuration> target # [   11.363688] iTCO_wdt iTCO_wdt.0.auto: initialized. heartbeat=30 sec (nowayout=0)
vm-test-run-update-hardware-configuration> target # [   11.444198] Console: switching to colour frame buffer device 160x50
vm-test-run-update-hardware-configuration> target # [   11.477540] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device
vm-test-run-update-hardware-configuration> target # [   11.188813] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   11.297747] systemd-logind[568]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)
vm-test-run-update-hardware-configuration> target # [   11.299320] systemd[1]: Finished Save Transient machine-id to Disk.
vm-test-run-update-hardware-configuration> target # [   11.304379] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   11.308088] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   11.316619] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [   11.628945] kvm_amd: TSC scaling supported
vm-test-run-update-hardware-configuration> target # [   11.629490] kvm_amd: Nested Virtualization enabled
vm-test-run-update-hardware-configuration> target # [   11.630077] kvm_amd: Nested Paging enabled
vm-test-run-update-hardware-configuration> target # [   11.633396] kvm_amd: LBR virtualization supported
vm-test-run-update-hardware-configuration> target # [   11.633988] kvm_amd: Virtual GIF supported
vm-test-run-update-hardware-configuration> target # [   11.636433] kvm_amd: Virtual NMI enabled
vm-test-run-update-hardware-configuration> target # [   11.681598] EDAC MC: Ver: 3.0.0
vm-test-run-update-hardware-configuration> target # [   11.530922] sshd-keygen-start[573]: Generating public/private rsa key pair.
vm-test-run-update-hardware-configuration> target # [   11.532234] sshd-keygen-start[573]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key
vm-test-run-update-hardware-configuration> target # [   11.533832] sshd-keygen-start[573]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
vm-test-run-update-hardware-configuration> target # [   11.536096] sshd-keygen-start[573]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [   11.537145] sshd-keygen-start[573]: SHA256:vIP4z+Xpf77BiNwAMPC5/FHumzAlC53azf01lr1RjIM root@target
vm-test-run-update-hardware-configuration> target # [   11.538578] sshd-keygen-start[573]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [   11.539646] sshd-keygen-start[573]: +---[RSA 4096]----+
vm-test-run-update-hardware-configuration> target # [   11.540563] sshd-keygen-start[573]: |    ..o          |
vm-test-run-update-hardware-configuration> target # [   11.541517] sshd-keygen-start[573]: |     . +         |
vm-test-run-update-hardware-configuration> target # [   11.542430] sshd-keygen-start[573]: |      o . .      |
vm-test-run-update-hardware-configuration> target # [   11.543335] sshd-keygen-start[573]: |     . + =   . o |
vm-test-run-update-hardware-configuration> target # [   11.544219] sshd-keygen-start[573]: |      + S + E o o|
vm-test-run-update-hardware-configuration> target # [   11.545091] sshd-keygen-start[573]: |     . * @ = o .+|
vm-test-run-update-hardware-configuration> target # [   11.545938] sshd-keygen-start[573]: |    . o O B + o=o|
vm-test-run-update-hardware-configuration> target # [   11.546936] sshd-keygen-start[573]: |     . . * + .oo+|
vm-test-run-update-hardware-configuration> target # [   11.547845] sshd-keygen-start[573]: |      ..o.*..o+o |
vm-test-run-update-hardware-configuration> target # [   11.548812] sshd-keygen-start[573]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   11.570170] sshd-keygen-start[610]: Generating public/private ed25519 key pair.
vm-test-run-update-hardware-configuration> target # [   11.571479] sshd-keygen-start[610]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
vm-test-run-update-hardware-configuration> target # [   11.573055] sshd-keygen-start[610]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
vm-test-run-update-hardware-configuration> target # [   11.574574] sshd-keygen-start[610]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [   11.575510] sshd-keygen-start[610]: SHA256:gg1r47qBxp2Z5HxUsodhU/x8Mr55yi+vTMmuRmh+p8A root@target
vm-test-run-update-hardware-configuration> target # [   11.576925] sshd-keygen-start[610]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [   11.577971] sshd-keygen-start[610]: +--[ED25519 256]--+
vm-test-run-update-hardware-configuration> target # [   11.578890] sshd-keygen-start[610]: |      ..         |
vm-test-run-update-hardware-configuration> target # [   11.579904] sshd-keygen-start[610]: |      ..         |
vm-test-run-update-hardware-configuration> target # [   11.580809] sshd-keygen-start[610]: |    .= .o        |
vm-test-run-update-hardware-configuration> target # [   11.581692] sshd-keygen-start[610]: |    .=B  = .     |
vm-test-run-update-hardware-configuration> target # [   11.582756] sshd-keygen-start[610]: |   .=++.S +      |
vm-test-run-update-hardware-configuration> target # [   11.583660] sshd-keygen-start[610]: |..=o*+.o...      |
vm-test-run-update-hardware-configuration> target # [   11.584598] sshd-keygen-start[610]: |.o.B+E.  +o      |
vm-test-run-update-hardware-configuration> target # [   11.585487] sshd-keygen-start[610]: |.  o...o== .     |
vm-test-run-update-hardware-configuration> target # [   11.586390] sshd-keygen-start[610]: |  o.  oo+*Bo     |
vm-test-run-update-hardware-configuration> target # [   11.587308] sshd-keygen-start[610]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   11.591060] systemd[1]: sshd-keygen.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [   11.592379] systemd[1]: Finished SSH Host Keys Generation.
vm-test-run-update-hardware-configuration> target # [   11.596857] systemd[1]: Starting SSH Daemon...
vm-test-run-update-hardware-configuration> target # [   11.620769] sshd[612]: Server listening on 0.0.0.0 port 22.
vm-test-run-update-hardware-configuration> target # [   11.622311] sshd[612]: Server listening on :: port 22.
vm-test-run-update-hardware-configuration> target # [   11.624683] systemd[1]: Started SSH Daemon.
vm-test-run-update-hardware-configuration> target # [   11.625574] systemd[1]: Reached target Multi-User System.
vm-test-run-update-hardware-configuration> target # [   11.670310] systemd-vconsole-setup[602]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [   11.674452] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   11.677328] systemd[1]: Startup finished in 907ms (kernel) + 6.861s (initrd) + 3.907s (userspace) = 11.676s.
vm-test-run-update-hardware-configuration> target # Connection to localhost (::1) 22 port [tcp/ssh] succeeded!
vm-test-run-update-hardware-configuration> target: (finished: waiting for TCP port 22 on localhost, in 6.65 seconds)
vm-test-run-update-hardware-configuration> Setting up port forwarding from host port 59765 to guest port 22
vm-test-run-update-hardware-configuration> target # [   11.746780] sshd-session[618]: Connection closed by ::1 port 47636 [preauth]
vm-test-run-update-hardware-configuration> target # [   11.759244] systemd-networkd[516]: eth1: Gained IPv6LL
vm-test-run-update-hardware-configuration> target # [   12.335793] systemd-networkd[516]: eth0: Gained IPv6LL
vm-test-run-update-hardware-configuration> Host port 59765 is now listening
vm-test-run-update-hardware-configuration> target # [   13.748627] sshd-session[621]: Connection closed by 10.0.2.2 port 59894 [preauth]
vm-test-run-update-hardware-configuration> target # [   23.707359] sshd-session[626]: Accepted publickey for nonrootuser from 10.0.2.2 port 53928 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   23.714604] sshd-session[626]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   23.731334] systemd-logind[568]: New session '1' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   23.736397] systemd[1]: Created slice Slice /user/1000.
vm-test-run-update-hardware-configuration> target # [   23.739436] systemd[1]: Starting User Runtime Directory /run/user/1000...
vm-test-run-update-hardware-configuration> target # [   23.761751] systemd[1]: Finished User Runtime Directory /run/user/1000.
vm-test-run-update-hardware-configuration> target # [   23.766052] systemd[1]: Starting User Manager for UID 1000...
vm-test-run-update-hardware-configuration> target # [   23.783670] (systemd)[632]: pam_unix(systemd-user:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   23.788722] systemd-logind[568]: New session '2' of user 'nonrootuser' with class 'manager' and type 'unspecified'.
vm-test-run-update-hardware-configuration> target # [   23.804976] systemd[632]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   23.897464] systemd[632]: Queued start job for default target Main User Target.
vm-test-run-update-hardware-configuration> target # [   23.899968] systemd[632]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   23.903120] systemd[632]: Created slice User Application Slice.
vm-test-run-update-hardware-configuration> target # [   23.904405] systemd[632]: Started Daily Cleanup of User's Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   23.906669] systemd[632]: Reached target Paths.
vm-test-run-update-hardware-configuration> target # [   23.907718] systemd[632]: Reached target Timers.
vm-test-run-update-hardware-configuration> target # [   23.910442] systemd[632]: Starting D-Bus User Message Bus Socket...
vm-test-run-update-hardware-configuration> target # [   23.912571] systemd[632]: Starting Create User Files and Directories...
vm-test-run-update-hardware-configuration> target # [   23.937113] systemd[632]: Finished Create User Files and Directories.
vm-test-run-update-hardware-configuration> target # [   23.949644] systemd[632]: Listening on D-Bus User Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   23.950875] systemd[632]: Reached target Sockets.
vm-test-run-update-hardware-configuration> target # [   23.951770] systemd[632]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   23.952733] systemd[1]: Started User Manager for UID 1000.
vm-test-run-update-hardware-configuration> target # [   23.956673] systemd[632]: Starting Run user-specific NixOS activation...
vm-test-run-update-hardware-configuration> target # [   23.960270] systemd[1]: Started Session 1 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   23.988221] systemd[632]: Finished Run user-specific NixOS activation.
vm-test-run-update-hardware-configuration> target # [   23.989996] systemd[632]: Reached target Main User Target.
vm-test-run-update-hardware-configuration> target # [   23.992067] systemd[632]: Startup finished in 190ms.
vm-test-run-update-hardware-configuration> target # [   24.034796] sudo[653]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-facter
vm-test-run-update-hardware-configuration> target # [   24.041498] sudo[653]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   24.310857] sr 2:0:0:0: Attached scsi generic sg0 type 5
vm-test-run-update-hardware-configuration> target # [   24.247630] sudo[653]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   24.256181] sshd-session[644]: Received disconnect from 10.0.2.2 port 53928:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   24.257786] sshd-session[644]: Disconnected from user nonrootuser 10.0.2.2 port 53928
vm-test-run-update-hardware-configuration> target # [   24.259501] sshd-session[626]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   24.264490] systemd-logind[568]: Session 1 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> target # [   34.441380] sshd-session[683]: Accepted publickey for nonrootuser from 10.0.2.2 port 52204 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   34.448675] sshd-session[683]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   34.454647] systemd-logind[568]: New session '3' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   34.459576] systemd[1]: Started Session 3 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   34.511133] sudo[693]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-generate-config --no-filesystems --show-hardware-config
vm-test-run-update-hardware-configuration> target # [   34.518331] sudo[693]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   34.659818] sudo[693]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   34.668143] sshd-session[686]: Received disconnect from 10.0.2.2 port 52204:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   34.669637] sshd-session[686]: Disconnected from user nonrootuser 10.0.2.2 port 52204
vm-test-run-update-hardware-configuration> target # [   34.671365] sshd-session[683]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   34.675392] systemd-logind[568]: Session 3 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> (finished: run the VM test script, in 36.08 seconds)
vm-test-run-update-hardware-configuration> test script finished in 36.20s
vm-test-run-update-hardware-configuration> cleanup
vm-test-run-update-hardware-configuration> kill QemuMachine (pid 45)
vm-test-run-update-hardware-configuration> target # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/lb41b0anx1f98y9y5s9mdv97gjgsq740-python3-3.14.7/bin/python3.14)
vm-test-run-update-hardware-configuration> target # [2026-10-05T15:14:00Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-10-05T15:14:00Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-10-05T15:14:00Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> (finished: cleanup, in 0.14 seconds)