don't know how to build these paths:
  /nix/store/p10ml5w40jmls87svdml5l97s9m1fj1i-vm-test-run-update-hardware-configuration.drv
warning: ignoring the client-specified setting 'store', because it is a restricted setting and you are not a trusted user
building '/nix/store/9vi6r8kbri07vn826z4xwqf9vivcybdm-test-script.drv' on nix-store.geninf.io:50051
test-script> gi-build-x86-02: building 9vi6r8kbri07vn826z4xwqf9vivcybdm-test-script.drv
test-script> structuredAttrs is enabled
building '/nix/store/zp3sv2ds8h96ssylrayih09jcmplpw3f-driverConfiguration.json.drv' on nix-store.geninf.io:50051
driverConfiguration.json> gi-build-x86-02: building zp3sv2ds8h96ssylrayih09jcmplpw3f-driverConfiguration.json.drv
driverConfiguration.json> structuredAttrs is enabled
building '/nix/store/0h3qqjhh5izkipkqbhh6w94ppynhzciz-nixos-test-driver-update-hardware-configuration.drv' on nix-store.geninf.io:50051
nixos-test-driver-update-hardware-configuration> gi-build-x86-02: building 0h3qqjhh5izkipkqbhh6w94ppynhzciz-nixos-test-driver-update-hardware-configuration.drv
nixos-test-driver-update-hardware-configuration> Running type check (enable/disable: config.skipTypeCheck)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck
nixos-test-driver-update-hardware-configuration> All checks passed!
nixos-test-driver-update-hardware-configuration> Linting test script (enable/disable: config.skipLint)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint
nixos-test-driver-update-hardware-configuration> All checks passed!
building '/nix/store/p10ml5w40jmls87svdml5l97s9m1fj1i-vm-test-run-update-hardware-configuration.drv' on nix-store.geninf.io:50051
vm-test-run-update-hardware-configuration> gi-build-x86-02: building p10ml5w40jmls87svdml5l97s9m1fj1i-vm-test-run-update-hardware-configuration.drv
vm-test-run-update-hardware-configuration> Machine state will be reset. To keep it, pass --keep-machine-state
vm-test-run-update-hardware-configuration> start all VLans
vm-test-run-update-hardware-configuration> (finished: start all VLans, in 0.00 seconds)
vm-test-run-update-hardware-configuration> Test will time out and terminate in 3600.0 seconds
vm-test-run-update-hardware-configuration> run the VM test script
vm-test-run-update-hardware-configuration> additionally exposed symbols:
vm-test-run-update-hardware-configuration>     target,
vm-test-run-update-hardware-configuration>     vlan1,
vm-test-run-update-hardware-configuration>     start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh
vm-test-run-update-hardware-configuration> target: starting vm
vm-test-run-update-hardware-configuration> target # Disk image does not exist, creating the virtualisation disk image...
vm-test-run-update-hardware-configuration> target # Formatting '/build/vm-state-target/tmp.nm11AVubzw', fmt=raw size=8589934592
vm-test-run-update-hardware-configuration> target # mke2fs 1.47.4 (6-Mar-2025)
vm-test-run-update-hardware-configuration> target # Discarding device blocks:       0/2097152               done
vm-test-run-update-hardware-configuration> target # Creating filesystem with 2097152 4k blocks and 524288 inodes
vm-test-run-update-hardware-configuration> target # Filesystem UUID: 5bf084fc-4965-47da-aae2-c50bfe37db2c
vm-test-run-update-hardware-configuration> target # Superblock backups stored on blocks:
vm-test-run-update-hardware-configuration> target # 	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Allocating group tables:  0/64     done
vm-test-run-update-hardware-configuration> target: QEMU running (pid 45)
vm-test-run-update-hardware-configuration> target # Writing inode tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Creating journal (16384 blocks): done
vm-test-run-update-hardware-configuration> target # Writing superblocks and filesystem accounting information:  0/64     done
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Virtualisation disk image created.
vm-test-run-update-hardware-configuration> target # Formatting 'empty0.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=536870912 lazy_refcounts=off refcount_bits=16
vm-test-run-update-hardware-configuration> target # Starting virtiofs daemons...
vm-test-run-update-hardware-configuration> target # [2026-10-13T16:55:09Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-13T16:55:09Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-13T16:55:09Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-13T16:55:09Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-13T16:55:09Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-13T16:55:09Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-13T16:55:09Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-13T16:55:09Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-13T16:55:09Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-13T16:55:09Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-10-13T16:55:09Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-10-13T16:55:09Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC550+7EF2C550 CA00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:02.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:06.0 CB00 PCI2.10 PnP PMM 7EFCC550 7EF2C550 CB00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:06.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Booting from ROM...
vm-test-run-update-hardware-configuration> target # Probing EDD (edd=off to disable)... ok[    0.000000] Linux version 6.18.55 (nixbld@localhost) (gcc (GCC) 16.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Sat Oct  3 10:39:03 UTC 2026
vm-test-run-update-hardware-configuration> target # [    0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/mxfhhk9z4c10xy213ialazjgblgi2l4i-nixos-system-target-test/init regInfo=/nix/.ro-store/ly27kn4a0x4hgazwph5h8lnmk0g1bx43-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-provided physical RAM map:
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd4fff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000007ffd5000-0x000000007fffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013e7fffff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] NX (Execute Disable) protection: active
vm-test-run-update-hardware-configuration> target # [    0.000000] APIC: Static calls initialized
vm-test-run-update-hardware-configuration> target # [    0.000000] SMBIOS 2.8 present.
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: Memory slots populated: 1/1
vm-test-run-update-hardware-configuration> target # [    0.000000] Hypervisor detected: KVM
vm-test-run-update-hardware-configuration> target # [    0.000000] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: using sched offset of 421431627 cycles
vm-test-run-update-hardware-configuration> target # [    0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
vm-test-run-update-hardware-configuration> target # [    0.000004] tsc: Detected 4192.144 MHz processor
vm-test-run-update-hardware-configuration> target # [    0.000591] last_pfn = 0x13e800 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000620] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
vm-test-run-update-hardware-configuration> target # [    0.000622] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
vm-test-run-update-hardware-configuration> target # [    0.000663] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.002431] found SMP MP-table at [mem 0x000f5450-0x000f545f]
vm-test-run-update-hardware-configuration> target # [    0.002444] Using GB pages for direct mapping
vm-test-run-update-hardware-configuration> target # [    0.002593] RAMDISK: [mem 0x7e2e3000-0x7ffcffff]
vm-test-run-update-hardware-configuration> target # [    0.002598] ACPI: Early table checksum verification disabled
vm-test-run-update-hardware-configuration> target # [    0.002600] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS )
vm-test-run-update-hardware-configuration> target # [    0.002604] ACPI: RSDT 0x000000007FFE2433 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002608] ACPI: FACP 0x000000007FFE222B 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002613] ACPI: DSDT 0x000000007FFE0040 0021EB (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002614] ACPI: FACS 0x000000007FFE0000 000040
vm-test-run-update-hardware-configuration> target # [    0.002616] ACPI: APIC 0x000000007FFE231F 000078 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002617] ACPI: HPET 0x000000007FFE2397 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002618] ACPI: MCFG 0x000000007FFE23CF 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002620] ACPI: WAET 0x000000007FFE240B 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002621] ACPI: Reserving FACP table memory at [mem 0x7ffe222b-0x7ffe231e]
vm-test-run-update-hardware-configuration> target # [    0.002622] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe222a]
vm-test-run-update-hardware-configuration> target # [    0.002622] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
vm-test-run-update-hardware-configuration> target # [    0.002623] ACPI: Reserving APIC table memory at [mem 0x7ffe231f-0x7ffe2396]
vm-test-run-update-hardware-configuration> target # [    0.002624] ACPI: Reserving HPET table memory at [mem 0x7ffe2397-0x7ffe23ce]
vm-test-run-update-hardware-configuration> target # [    0.002624] ACPI: Reserving MCFG table memory at [mem 0x7ffe23cf-0x7ffe240a]
vm-test-run-update-hardware-configuration> target # [    0.002625] ACPI: Reserving WAET table memory at [mem 0x7ffe240b-0x7ffe2432]
vm-test-run-update-hardware-configuration> target # [    0.003007] No NUMA configuration found
vm-test-run-update-hardware-configuration> target # [    0.003008] Faking a node at [mem 0x0000000000000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003011] NODE_DATA(0) allocated [mem 0x13e7f8780-0x13e7fdcff]
vm-test-run-update-hardware-configuration> target # [    0.003089] Zone ranges:
vm-test-run-update-hardware-configuration> target # [    0.003089]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
vm-test-run-update-hardware-configuration> target # [    0.003090]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
vm-test-run-update-hardware-configuration> target # [    0.003091]   Normal   [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003092]   Device   empty
vm-test-run-update-hardware-configuration> target # [    0.003092] Movable zone start for each node
vm-test-run-update-hardware-configuration> target # [    0.003093] Early memory node ranges
vm-test-run-update-hardware-configuration> target # [    0.003093]   node   0: [mem 0x0000000000001000-0x000000000009efff]
vm-test-run-update-hardware-configuration> target # [    0.003094]   node   0: [mem 0x0000000000100000-0x000000007ffd4fff]
vm-test-run-update-hardware-configuration> target # [    0.003095]   node   0: [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003095] Initmem setup node 0 [mem 0x0000000000001000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.003111] On node 0, zone DMA: 1 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.003315] On node 0, zone DMA: 97 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.044756] On node 0, zone Normal: 43 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.045072] On node 0, zone Normal: 6144 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.045926] ACPI: PM-Timer IO Port: 0x608
vm-test-run-update-hardware-configuration> target # [    0.045936] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
vm-test-run-update-hardware-configuration> target # [    0.045958] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
vm-test-run-update-hardware-configuration> target # [    0.045959] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
vm-test-run-update-hardware-configuration> target # [    0.045961] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
vm-test-run-update-hardware-configuration> target # [    0.045962] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
vm-test-run-update-hardware-configuration> target # [    0.045963] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
vm-test-run-update-hardware-configuration> target # [    0.045963] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
vm-test-run-update-hardware-configuration> target # [    0.045965] ACPI: Using ACPI (MADT) for SMP configuration information
vm-test-run-update-hardware-configuration> target # [    0.045966] ACPI: HPET id: 0x8086a201 base: 0xfed00000
vm-test-run-update-hardware-configuration> target # [    0.045968] TSC deadline timer available
vm-test-run-update-hardware-configuration> target # [    0.045972] CPU topo: Max. logical packages:   1
vm-test-run-update-hardware-configuration> target # [    0.045972] CPU topo: Max. logical dies:       1
vm-test-run-update-hardware-configuration> target # [    0.045973] CPU topo: Max. dies per package:   1
vm-test-run-update-hardware-configuration> target # [    0.045976] CPU topo: Max. threads per core:   1
vm-test-run-update-hardware-configuration> target # [    0.045976] CPU topo: Num. cores per package:     1
vm-test-run-update-hardware-configuration> target # [    0.045976] CPU topo: Num. threads per package:   1
vm-test-run-update-hardware-configuration> target # [    0.045977] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs
vm-test-run-update-hardware-configuration> target # [    0.045989] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
vm-test-run-update-hardware-configuration> target # [    0.046008] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
vm-test-run-update-hardware-configuration> target # [    0.046009] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
vm-test-run-update-hardware-configuration> target # [    0.046010] PM: hibernation: Registered nosave memory: [mem 0x7ffd5000-0xffffffff]
vm-test-run-update-hardware-configuration> target # [    0.046011] [mem 0xc0000000-0xfed1bfff] available for PCI devices
vm-test-run-update-hardware-configuration> target # [    0.046012] Booting paravirtualized kernel on KVM
vm-test-run-update-hardware-configuration> target # [    0.046014] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
vm-test-run-update-hardware-configuration> target # [    0.049568] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
vm-test-run-update-hardware-configuration> target # [    0.051253] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152
vm-test-run-update-hardware-configuration> target # [    0.051293] kvm-guest: PV spinlocks disabled, single CPU
vm-test-run-update-hardware-configuration> target # [    0.051294] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/mxfhhk9z4c10xy213ialazjgblgi2l4i-nixos-system-target-test/init regInfo=/nix/.ro-store/ly27kn4a0x4hgazwph5h8lnmk0g1bx43-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.051364] Unknown kernel command line parameters "regInfo=/nix/.ro-store/ly27kn4a0x4hgazwph5h8lnmk0g1bx43-closure-info/registration", will be passed to user space.
vm-test-run-update-hardware-configuration> target # [    0.051560] random: crng init done
vm-test-run-update-hardware-configuration> target # [    0.051561] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
vm-test-run-update-hardware-configuration> target # [    0.055018] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.056840] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.056866] software IO TLB: area num 1.
vm-test-run-update-hardware-configuration> target # [    0.114854] Fallback order for Node 0: 0
vm-test-run-update-hardware-configuration> target # [    0.114860] Built 1 zonelists, mobility grouping on.  Total pages: 780147
vm-test-run-update-hardware-configuration> target # [    0.114862] Policy zone: Normal
vm-test-run-update-hardware-configuration> target # [    0.117591] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
vm-test-run-update-hardware-configuration> target # [    0.123845] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
vm-test-run-update-hardware-configuration> target # [    0.130119] allocated 6291456 bytes of page_ext
vm-test-run-update-hardware-configuration> target # [    0.139696] ftrace: allocating 48837 entries in 192 pages
vm-test-run-update-hardware-configuration> target # [    0.139697] ftrace: allocated 192 pages with 2 groups
vm-test-run-update-hardware-configuration> target # [    0.140427] Dynamic Preempt: lazy
vm-test-run-update-hardware-configuration> target # [    0.140761] rcu: Preemptible hierarchical RCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.140762] rcu: 	RCU event tracing is enabled.
vm-test-run-update-hardware-configuration> target # [    0.140762] rcu: 	RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.140764] 	Trampoline variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.140764] 	Rude variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.140765] 	Tracing variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.140766] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
vm-test-run-update-hardware-configuration> target # [    0.140766] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
vm-test-run-update-hardware-configuration> target # [    0.140785] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.140786] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.140787] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.144225] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16
vm-test-run-update-hardware-configuration> target # [    0.144472] rcu: srcu_init: Setting srcu_struct sizes based on contention.
vm-test-run-update-hardware-configuration> target # [    0.144478] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
vm-test-run-update-hardware-configuration> target # [    0.144640] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
vm-test-run-update-hardware-configuration> target # [    0.150048] Console: colour VGA+ 80x25
vm-test-run-update-hardware-configuration> target # [    0.150051] printk: legacy console [tty0] enabled
vm-test-run-update-hardware-configuration> target # [    0.183512] printk: legacy console [ttyS0] enabled
vm-test-run-update-hardware-configuration> target # [    0.333900] ACPI: Core revision 20250807
vm-test-run-update-hardware-configuration> target # [    0.335061] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
vm-test-run-update-hardware-configuration> target # [    0.337204] APIC: Switch to symmetric I/O mode setup
vm-test-run-update-hardware-configuration> target # [    0.338507] x2apic enabled
vm-test-run-update-hardware-configuration> target # [    0.339384] APIC: Switched APIC routing to: physical x2apic
vm-test-run-update-hardware-configuration> target # [    0.341484] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
vm-test-run-update-hardware-configuration> target # [    0.342857] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d6439039, max_idle_ns: 440795360443 ns
vm-test-run-update-hardware-configuration> target # [    0.345125] Calibrating delay loop (skipped) preset value.. 8384.28 BogoMIPS (lpj=4192144)
vm-test-run-update-hardware-configuration> target # [    0.347230] x86/cpu: User Mode Instruction Prevention (UMIP) activated
vm-test-run-update-hardware-configuration> target # [    0.349244] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
vm-test-run-update-hardware-configuration> target # [    0.350123] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
vm-test-run-update-hardware-configuration> target # [    0.351128] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
vm-test-run-update-hardware-configuration> target # [    0.353125] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
vm-test-run-update-hardware-configuration> target # [    0.354124] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
vm-test-run-update-hardware-configuration> target # [    0.355124] Speculative Return Stack Overflow: Mitigation: Safe RET
vm-test-run-update-hardware-configuration> target # [    0.357124] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
vm-test-run-update-hardware-configuration> target # [    0.358137] Spectre V2 : Enabling IBPB for BPF
vm-test-run-update-hardware-configuration> target # [    0.359125] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
vm-test-run-update-hardware-configuration> target # [    0.360124] active return thunk: srso_alias_return_thunk
vm-test-run-update-hardware-configuration> target # [    0.361147] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
vm-test-run-update-hardware-configuration> target # [    0.362123] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
vm-test-run-update-hardware-configuration> target # [    0.364123] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
vm-test-run-update-hardware-configuration> target # [    0.365123] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
vm-test-run-update-hardware-configuration> target # [    0.366123] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
vm-test-run-update-hardware-configuration> target # [    0.367123] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
vm-test-run-update-hardware-configuration> target # [    0.368123] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
vm-test-run-update-hardware-configuration> target # [    0.369123] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
vm-test-run-update-hardware-configuration> target # [    0.370123] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
vm-test-run-update-hardware-configuration> target # [    0.371124] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
vm-test-run-update-hardware-configuration> target # [    0.372124] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
vm-test-run-update-hardware-configuration> target # [    0.373124] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
vm-test-run-update-hardware-configuration> target # [    0.374123] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
vm-test-run-update-hardware-configuration> target # [    0.376123] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
vm-test-run-update-hardware-configuration> target # [    0.377123] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16
vm-test-run-update-hardware-configuration> target # [    0.378123] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]:   24
vm-test-run-update-hardware-configuration> target # [    0.380123] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.
vm-test-run-update-hardware-configuration> target # [    0.408334] Freeing SMP alternatives memory: 48K
vm-test-run-update-hardware-configuration> target # [    0.409126] pid_max: default: 32768 minimum: 301
vm-test-run-update-hardware-configuration> target # [    0.410194] LSM: initializing lsm=capability,landlock,yama,bpf,ima
vm-test-run-update-hardware-configuration> target # [    0.411213] landlock: Up and running.
vm-test-run-update-hardware-configuration> target # [    0.412123] Yama: becoming mindful.
vm-test-run-update-hardware-configuration> target # [    0.413329] LSM support for eBPF active
vm-test-run-update-hardware-configuration> target # [    0.414252] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.415214] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.417794] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2)
vm-test-run-update-hardware-configuration> target # [    0.418575] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
vm-test-run-update-hardware-configuration> target # [    0.419127] ... version:                   2
vm-test-run-update-hardware-configuration> target # [    0.420064] ... bit width:                 48
vm-test-run-update-hardware-configuration> target # [    0.420865] ... generic counters:          6
vm-test-run-update-hardware-configuration> target # [    0.421138] ... generic bitmap:            000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.422124] ... fixed-purpose counters:    0
vm-test-run-update-hardware-configuration> target # [    0.423059] ... fixed-purpose bitmap:      0000000000000000
vm-test-run-update-hardware-configuration> target # [    0.424054] ... value mask:                0000ffffffffffff
vm-test-run-update-hardware-configuration> target # [    0.425125] ... max period:                00007fffffffffff
vm-test-run-update-hardware-configuration> target # [    0.426125] ... global_ctrl mask:          000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.427231] signal: max sigframe size: 3376
vm-test-run-update-hardware-configuration> target # [    0.428237] rcu: Hierarchical SRCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.429130] rcu: 	Max phase no-delay instances is 400.
vm-test-run-update-hardware-configuration> target # [    0.433566] smp: Bringing up secondary CPUs ...
vm-test-run-update-hardware-configuration> target # [    0.434142] smp: Brought up 1 node, 1 CPU
vm-test-run-update-hardware-configuration> target # [    0.435032] smpboot: Total of 1 processors activated (8384.28 BogoMIPS)
vm-test-run-update-hardware-configuration> target # [    0.436341] Memory: 2906356K/3120588K available (18124K kernel code, 2728K rwdata, 13644K rodata, 3656K init, 3632K bss, 201812K reserved, 0K cma-reserved)
vm-test-run-update-hardware-configuration> target # [    0.437385] devtmpfs: initialized
vm-test-run-update-hardware-configuration> target # [    0.438306] x86/mm: Memory block size: 128MB
vm-test-run-update-hardware-configuration> target # [    0.440205] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.441149] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).
vm-test-run-update-hardware-configuration> target # [    0.442234] pinctrl core: initialized pinctrl subsystem
vm-test-run-update-hardware-configuration> target # [    0.443409] PM: RTC time: 16:55:09, date: 2026-10-13
vm-test-run-update-hardware-configuration> target # [    0.446372] NET: Registered PF_NETLINK/PF_ROUTE protocol family
vm-test-run-update-hardware-configuration> target # [    0.447789] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.448156] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.449806] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.450147] audit: initializing netlink subsys (disabled)
vm-test-run-update-hardware-configuration> target # [    0.451415] thermal_sys: Registered thermal governor 'fair_share'
vm-test-run-update-hardware-configuration> target # [    0.451417] thermal_sys: Registered thermal governor 'bang_bang'
vm-test-run-update-hardware-configuration> target # [    0.452126] thermal_sys: Registered thermal governor 'step_wise'
vm-test-run-update-hardware-configuration> target # [    0.453130] audit: type=2000 audit(1791910510.210:1): state=initialized audit_enabled=0 res=1
vm-test-run-update-hardware-configuration> target # [    0.455128] thermal_sys: Registered thermal governor 'user_space'
vm-test-run-update-hardware-configuration> target # [    0.455129] thermal_sys: Registered thermal governor 'power_allocator'
vm-test-run-update-hardware-configuration> target # [    0.456155] cpuidle: using governor menu
vm-test-run-update-hardware-configuration> target # [    0.458971] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vm-test-run-update-hardware-configuration> target # [    0.460451] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.461131] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
vm-test-run-update-hardware-configuration> target # [    0.462141] PCI: Using configuration type 1 for base access
vm-test-run-update-hardware-configuration> target # [    0.463333] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
vm-test-run-update-hardware-configuration> target # [    0.470412] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.471126] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
vm-test-run-update-hardware-configuration> target # [    0.476127] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.477126] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
vm-test-run-update-hardware-configuration> target # [    0.484710] ACPI: Added _OSI(Module Device)
vm-test-run-update-hardware-configuration> target # [    0.485125] ACPI: Added _OSI(Processor Device)
vm-test-run-update-hardware-configuration> target # [    0.486125] ACPI: Added _OSI(Processor Aggregator Device)
vm-test-run-update-hardware-configuration> target # [    0.491119] ACPI: 1 ACPI AML tables successfully acquired and loaded
vm-test-run-update-hardware-configuration> target # [    0.497484] ACPI: Interpreter enabled
vm-test-run-update-hardware-configuration> target # [    0.498143] ACPI: PM: (supports S0 S3 S4 S5)
vm-test-run-update-hardware-configuration> target # [    0.499116] ACPI: Using IOAPIC for interrupt routing
vm-test-run-update-hardware-configuration> target # [    0.501764] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
vm-test-run-update-hardware-configuration> target # [    0.502125] PCI: Using E820 reservations for host bridge windows
vm-test-run-update-hardware-configuration> target # [    0.503273] ACPI: Enabled 2 GPEs in block 00 to 3F
vm-test-run-update-hardware-configuration> target # [    0.507653] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
vm-test-run-update-hardware-configuration> target # [    0.508130] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
vm-test-run-update-hardware-configuration> target # [    0.509204] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]
vm-test-run-update-hardware-configuration> target # [    0.510246] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
vm-test-run-update-hardware-configuration> target # [    0.511668] PCI host bridge to bus 0000:00
vm-test-run-update-hardware-configuration> target # [    0.512133] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.513128] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.514127] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.515127] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.516127] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.517127] pci_bus 0000:00: root bus resource [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.518127] pci_bus 0000:00: root bus resource [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.519245] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.520823] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.524273] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
vm-test-run-update-hardware-configuration> target # [    0.525192] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
vm-test-run-update-hardware-configuration> target # [    0.526163] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
vm-test-run-update-hardware-configuration> target # [    0.527434] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
vm-test-run-update-hardware-configuration> target # [    0.528939] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.532109] pci 0000:00:02.0: BAR 0 [io  0xc180-0xc19f]
vm-test-run-update-hardware-configuration> target # [    0.533016] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
vm-test-run-update-hardware-configuration> target # [    0.534154] pci 0000:00:02.0: BAR 4 [mem 0xe0000000000-0xe0000003fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.535136] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]
vm-test-run-update-hardware-configuration> target # [    0.537121] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.539137] pci 0000:00:03.0: BAR 0 [io  0xc1a0-0xc1bf]
vm-test-run-update-hardware-configuration> target # [    0.540135] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
vm-test-run-update-hardware-configuration> target # [    0.541164] pci 0000:00:03.0: BAR 4 [mem 0xe0000004000-0xe0000007fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.543082] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.545940] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
vm-test-run-update-hardware-configuration> target # [    0.547029] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
vm-test-run-update-hardware-configuration> target # [    0.548173] pci 0000:00:04.0: BAR 4 [mem 0xe0000008000-0xe000000bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.550170] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.552715] pci 0000:00:05.0: BAR 0 [io  0xc080-0xc0ff]
vm-test-run-update-hardware-configuration> target # [    0.553137] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]
vm-test-run-update-hardware-configuration> target # [    0.554172] pci 0000:00:05.0: BAR 4 [mem 0xe000000c000-0xe000000ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.556057] pci 0000:00:06.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.559652] pci 0000:00:06.0: BAR 0 [io  0xc1c0-0xc1df]
vm-test-run-update-hardware-configuration> target # [    0.560136] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]
vm-test-run-update-hardware-configuration> target # [    0.561165] pci 0000:00:06.0: BAR 4 [mem 0xe0000010000-0xe0000013fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.562136] pci 0000:00:06.0: ROM [mem 0xfeb80000-0xfebbffff pref]
vm-test-run-update-hardware-configuration> target # [    0.564070] pci 0000:00:07.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.566125] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]
vm-test-run-update-hardware-configuration> target # [    0.567165] pci 0000:00:07.0: BAR 4 [mem 0xe0000014000-0xe0000017fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.569104] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.571135] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]
vm-test-run-update-hardware-configuration> target # [    0.572165] pci 0000:00:08.0: BAR 4 [mem 0xe0000018000-0xe000001bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.574042] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.576086] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]
vm-test-run-update-hardware-configuration> target # [    0.577166] pci 0000:00:09.0: BAR 4 [mem 0xe000001c000-0xe000001ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.580126] pci 0000:00:0a.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.582125] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]
vm-test-run-update-hardware-configuration> target # [    0.583166] pci 0000:00:0a.0: BAR 4 [mem 0xe0000020000-0xe0000023fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.585285] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.587138] pci 0000:00:0b.0: BAR 0 [io  0xc100-0xc13f]
vm-test-run-update-hardware-configuration> target # [    0.588137] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]
vm-test-run-update-hardware-configuration> target # [    0.589165] pci 0000:00:0b.0: BAR 4 [mem 0xe0000024000-0xe0000027fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.591097] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.593137] pci 0000:00:0c.0: BAR 0 [io  0xc1e0-0xc1ff]
vm-test-run-update-hardware-configuration> target # [    0.594137] pci 0000:00:0c.0: BAR 1 [mem 0xfebdb000-0xfebdbfff]
vm-test-run-update-hardware-configuration> target # [    0.595171] pci 0000:00:0c.0: BAR 4 [mem 0xe0000028000-0xe000002bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.597136] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.599158] pci 0000:00:1d.0: BAR 4 [io  0xc200-0xc21f]
vm-test-run-update-hardware-configuration> target # [    0.600445] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.601987] pci 0000:00:1d.1: BAR 4 [io  0xc220-0xc23f]
vm-test-run-update-hardware-configuration> target # [    0.603333] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.604940] pci 0000:00:1d.2: BAR 4 [io  0xc240-0xc25f]
vm-test-run-update-hardware-configuration> target # [    0.606381] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.607963] pci 0000:00:1d.7: BAR 0 [mem 0xfebdc000-0xfebdcfff]
vm-test-run-update-hardware-configuration> target # [    0.609509] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.610623] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
vm-test-run-update-hardware-configuration> target # [    0.611484] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.613179] pci 0000:00:1f.2: BAR 4 [io  0xc260-0xc27f]
vm-test-run-update-hardware-configuration> target # [    0.614137] pci 0000:00:1f.2: BAR 5 [mem 0xfebdd000-0xfebddfff]
vm-test-run-update-hardware-configuration> target # [    0.615635] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.616856] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
vm-test-run-update-hardware-configuration> target # [    0.622402] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.623249] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.624241] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.625245] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.626262] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.627252] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.628294] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.629255] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.630177] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.631145] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.632141] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.633148] ACPI: PCI: Interrupt link GSID configured for IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.634148] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
vm-test-run-update-hardware-configuration> target # [    0.635140] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
vm-test-run-update-hardware-configuration> target # [    0.636149] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
vm-test-run-update-hardware-configuration> target # [    0.637140] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
vm-test-run-update-hardware-configuration> target # [    0.638970] iommu: Default domain type: Translated
vm-test-run-update-hardware-configuration> target # [    0.639938] iommu: DMA domain TLB invalidation policy: lazy mode
vm-test-run-update-hardware-configuration> target # [    0.641348] ACPI: bus type USB registered
vm-test-run-update-hardware-configuration> target # [    0.642182] usbcore: registered new interface driver usbfs
vm-test-run-update-hardware-configuration> target # [    0.643140] usbcore: registered new interface driver hub
vm-test-run-update-hardware-configuration> target # [    0.644139] usbcore: registered new device driver usb
vm-test-run-update-hardware-configuration> target # [    0.645830] NetLabel: Initializing
vm-test-run-update-hardware-configuration> target # [    0.646130] NetLabel:  domain hash size = 128
vm-test-run-update-hardware-configuration> target # [    0.647084] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
vm-test-run-update-hardware-configuration> target # [    0.648110] NetLabel:  unlabeled traffic allowed by default
vm-test-run-update-hardware-configuration> target # [    0.649090] PCI: Using ACPI for IRQ routing
vm-test-run-update-hardware-configuration> target # [    0.729259] pci 0000:00:01.0: vgaarb: setting as boot VGA device
vm-test-run-update-hardware-configuration> target # [    0.730121] pci 0000:00:01.0: vgaarb: bridge control possible
vm-test-run-update-hardware-configuration> target # [    0.730121] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vm-test-run-update-hardware-configuration> target # [    0.730130] vgaarb: loaded
vm-test-run-update-hardware-configuration> target # [    0.730954] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
vm-test-run-update-hardware-configuration> target # [    0.731956] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
vm-test-run-update-hardware-configuration> target # [    0.736213] clocksource: Switched to clocksource kvm-clock
vm-test-run-update-hardware-configuration> target # [    0.739464] VFS: Disk quotas dquot_6.6.0
vm-test-run-update-hardware-configuration> target # [    0.740354] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
vm-test-run-update-hardware-configuration> target # [    0.741980] pnp: PnP ACPI init
vm-test-run-update-hardware-configuration> target # [    0.742897] ACPI: IRQ 4 override to edge(!), high(!)
vm-test-run-update-hardware-configuration> target # [    0.744071] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
vm-test-run-update-hardware-configuration> target # [    0.745930] pnp: PnP ACPI: found 5 devices
vm-test-run-update-hardware-configuration> target # [    0.753210] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
vm-test-run-update-hardware-configuration> target # [    0.755062] clocksource: Switched to clocksource acpi_pm
vm-test-run-update-hardware-configuration> target # [    0.756273] NET: Registered PF_INET protocol family
vm-test-run-update-hardware-configuration> target # [    0.757899] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.772318] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.774202] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.775858] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.777545] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.779162] TCP: Hash tables configured (established 32768 bind 32768)
vm-test-run-update-hardware-configuration> target # [    0.780584] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.782294] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.783837] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.785433] NET: Registered PF_UNIX/PF_LOCAL protocol family
vm-test-run-update-hardware-configuration> target # [    0.786695] NET: Registered PF_XDP protocol family
vm-test-run-update-hardware-configuration> target # [    0.787779] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.789072] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.790354] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.791770] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.793183] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.794592] pci_bus 0000:00: resource 9 [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.796753] ACPI: \_SB_.GSIA: Enabled at IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.798855] ACPI: \_SB_.GSIB: Enabled at IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.800952] ACPI: \_SB_.GSIC: Enabled at IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.802962] ACPI: \_SB_.GSID: Enabled at IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.804759] PCI: CLS 0 bytes, default 64
vm-test-run-update-hardware-configuration> target # [    0.805804] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
vm-test-run-update-hardware-configuration> target # [    0.807242] Trying to unpack rootfs image as initramfs...
vm-test-run-update-hardware-configuration> target # [    0.810884] software IO TLB: mapped [mem 0x000000007a2e3000-0x000000007e2e3000] (64MB)
vm-test-run-update-hardware-configuration> target # [    0.812636] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d6439039, max_idle_ns: 440795360443 ns
vm-test-run-update-hardware-configuration> target # [    0.847978] Initialise system trusted keyrings
vm-test-run-update-hardware-configuration> target # [    0.851773] workingset: timestamp_bits=40 max_order=20 bucket_order=0
vm-test-run-update-hardware-configuration> target # [    0.868267] Key type asymmetric registered
vm-test-run-update-hardware-configuration> target # [    0.873691] Asymmetric key parser 'x509' registered
vm-test-run-update-hardware-configuration> target # [    0.874871] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
vm-test-run-update-hardware-configuration> target # [    0.878810] io scheduler mq-deadline registered
vm-test-run-update-hardware-configuration> target # [    0.879861] io scheduler kyber registered
vm-test-run-update-hardware-configuration> target # [    0.883212] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
vm-test-run-update-hardware-configuration> target # [    0.887928] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
vm-test-run-update-hardware-configuration> target # [    0.893596] Linux agpgart interface v0.103
vm-test-run-update-hardware-configuration> target # [    0.894621] ACPI: bus type drm_connector registered
vm-test-run-update-hardware-configuration> target # [    0.898062] usbcore: registered new interface driver usbserial_generic
vm-test-run-update-hardware-configuration> target # [    0.899485] usbserial: USB Serial support registered for generic
vm-test-run-update-hardware-configuration> target # [    0.904687] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.
vm-test-run-update-hardware-configuration> target # [    0.904687] Please enable it if your BIOS has the CPPC option.
vm-test-run-update-hardware-configuration> target # [    0.907862] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
vm-test-run-update-hardware-configuration> target # [    0.913815] drop_monitor: Initializing network drop monitor service
vm-test-run-update-hardware-configuration> target # [    0.915412] NET: Registered PF_INET6 protocol family
vm-test-run-update-hardware-configuration> target # [    0.919258] Segment Routing with IPv6
vm-test-run-update-hardware-configuration> target # [    0.922701] In-situ OAM (IOAM) with IPv6
vm-test-run-update-hardware-configuration> target # [    0.923969] IPI shorthand broadcast: enabled
vm-test-run-update-hardware-configuration> target # [    0.931888] sched_clock: Marking stable (737022914, 194643573)->(1041154329, -109487842)
vm-test-run-update-hardware-configuration> target # [    0.936891] registered taskstats version 1
vm-test-run-update-hardware-configuration> target # [    0.938062] Loading compiled-in X.509 certificates
vm-test-run-update-hardware-configuration> target # [    0.956686] Demotion targets for Node 0: null
vm-test-run-update-hardware-configuration> target # [    0.957864] Key type .fscrypt registered
vm-test-run-update-hardware-configuration> target # [    0.960671] Key type fscrypt-provisioning registered
vm-test-run-update-hardware-configuration> target # [    0.961883] ima: No TPM chip found, activating TPM-bypass!
vm-test-run-update-hardware-configuration> target # [    0.964678] ima: Allocated hash algorithm: sha1
vm-test-run-update-hardware-configuration> target # [    0.965731] ima: No architecture policies found
vm-test-run-update-hardware-configuration> target # [    0.968875] PM:   Magic number: 14:589:944
vm-test-run-update-hardware-configuration> target # [    0.969838] tty tty1: hash matches
vm-test-run-update-hardware-configuration> target # [    0.973377] RAS: Correctable Errors collector initialized.
vm-test-run-update-hardware-configuration> target # [    0.981621] clk: Disabling unused clocks
vm-test-run-update-hardware-configuration> target # [    0.984685] PM: genpd: Disabling unused power domains
vm-test-run-update-hardware-configuration> target # [    1.118345] Freeing initrd memory: 29620K
vm-test-run-update-hardware-configuration> target # [    1.121407] Freeing unused decrypted memory: 2028K
vm-test-run-update-hardware-configuration> target # [    1.124151] Freeing unused kernel image (initmem) memory: 3656K
vm-test-run-update-hardware-configuration> target # [    1.125547] Write protecting the kernel read-only data: 32768k
vm-test-run-update-hardware-configuration> target # [    1.127132] Freeing unused kernel image (text/rodata gap) memory: 304K
vm-test-run-update-hardware-configuration> target # [    1.128931] Freeing unused kernel image (rodata/data gap) memory: 692K
vm-test-run-update-hardware-configuration> target # [    1.163923] x86/mm: Checked W+X mappings: passed, no W+X pages found.
vm-test-run-update-hardware-configuration> target # [    1.165376] Run /init as init process
vm-test-run-update-hardware-configuration> target # [    1.175120] systemd[1]: Inserted module 'autofs4'
vm-test-run-update-hardware-configuration> target # [    1.191139] fuse: init (API version 7.45)
vm-test-run-update-hardware-configuration> target # [    1.197486] ACPI: \_SB_.GSIG: Enabled at IRQ 22
vm-test-run-update-hardware-configuration> target # [    1.200233] ACPI: \_SB_.GSIH: Enabled at IRQ 23
vm-test-run-update-hardware-configuration> target # [    1.203735] ACPI: \_SB_.GSIE: Enabled at IRQ 20
vm-test-run-update-hardware-configuration> target # [    1.206323] ACPI: \_SB_.GSIF: Enabled at IRQ 21
vm-test-run-update-hardware-configuration> target # [    1.214344] virtiofs virtio6: discovered new tag: nix-store
vm-test-run-update-hardware-configuration> target # [    1.216606] virtiofs virtio6: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.224862] virtiofs virtio7: discovered new tag: shared
vm-test-run-update-hardware-configuration> target # [    1.238480] virtiofs virtio7: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.242568] virtiofs virtio8: discovered new tag: xchg
vm-test-run-update-hardware-configuration> target # [    1.244765] virtiofs virtio8: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.267861] systemd[1]: Successfully made /usr/ read-only.
vm-test-run-update-hardware-configuration> target # [    1.604249] systemd[1]: systemd 261.3 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    1.611485] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    1.612840] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    1.614102] systemd[1]: Running in initrd.
vm-test-run-update-hardware-configuration> target # [    1.615350] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    1.616838] systemd[1]: Hostname set to <target>.
vm-test-run-update-hardware-configuration> target # [    1.679021] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    1.711762] systemd[1]: Queued start job for default target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    1.715810] systemd[1]: Created slice Slice /system/modprobe.
vm-test-run-update-hardware-configuration> target # [    1.717449] systemd[1]: Created slice Slice /system/systemd-makefs.
vm-test-run-update-hardware-configuration> target # [    1.718912] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    1.720691] systemd[1]: Expecting device /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    1.721837] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    1.722954] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    1.724101] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    1.725151] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    1.726373] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    1.727921] systemd[1]: Listening on Journal Socket (/dev/log).
vm-test-run-update-hardware-configuration> target # [    1.729359] systemd[1]: Listening on Journal Sockets.
vm-test-run-update-hardware-configuration> target # [    1.730668] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    1.731951] systemd[1]: Listening on udev Kernel Socket.
vm-test-run-update-hardware-configuration> target # [    1.733167] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    1.735050] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    1.741809] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    1.752115] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    1.756369] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    1.759180] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    1.765832] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    1.781727] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    1.787326] systemd-journald[65]: Collecting audit messages is disabled.
vm-test-run-update-hardware-configuration> target # [    1.789367] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    1.797174] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    1.805143] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config
vm-test-run-update-hardware-configuration> target # [    1.809074] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
vm-test-run-update-hardware-configuration> target # [    1.816359] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    1.820693] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
vm-test-run-update-hardware-configuration> target # [    1.850248] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    1.858793] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    1.866705] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    1.879706] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    1.912725] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    1.919747] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    1.926000] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    1.930728] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    1.937846] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    1.958733] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    1.766238] systemd-modules-load[66]: Inserted module 'dm_mod'
vm-test-run-update-hardware-configuration> target # [    1.771091] systemd-modules-load[66]: Inserted module 'virtio_balloon'
vm-test-run-update-hardware-configuration> target # [    1.772716] systemd-modules-load[66]: Inserted module 'virtio_gpu'
vm-test-run-update-hardware-configuration> target # [    1.780283] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    1.810443] systemd-udevd[73]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    1.815434] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    1.837889] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    1.856641] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    1.857777] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    1.858877] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    2.258948] virtio_blk virtio2: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.286468] virtio_blk virtio2: [vda] 16777216 512-byte logical blocks (8.59 GB/8.00 GiB)
vm-test-run-update-hardware-configuration> target # [    2.298301] uhci_hcd 0000:00:1d.0: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.299210] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
vm-test-run-update-hardware-configuration> target # [    2.307152] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
vm-test-run-update-hardware-configuration> target # [    2.320236] virtio_blk virtio3: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.322818] serio: i8042 KBD port at 0x60,0x64 irq 1
vm-test-run-update-hardware-configuration> target # [    2.323714] uhci_hcd 0000:00:1d.0: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.331011] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200
vm-test-run-update-hardware-configuration> target # [    2.335302] virtio_blk virtio3: [vdb] 1048576 512-byte logical blocks (537 MB/512 MiB)
vm-test-run-update-hardware-configuration> target # [    2.338937] serio: i8042 AUX port at 0x60,0x64 irq 12
vm-test-run-update-hardware-configuration> target # [    2.346183] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.347563] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.363049] usb usb1: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.373006] usb usb1: Manufacturer: Linux 6.18.55 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.381862] usb usb1: SerialNumber: 0000:00:1d.0
vm-test-run-update-hardware-configuration> target # [    2.387657] hub 1-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.390751] hub 1-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.393426] SCSI subsystem initialized
vm-test-run-update-hardware-configuration> target # [    2.199902] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    2.401996] ehci-pci 0000:00:1d.7: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.403024] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
vm-test-run-update-hardware-configuration> target # [    2.405885] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdc000
vm-test-run-update-hardware-configuration> target # [    2.414646] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
vm-test-run-update-hardware-configuration> target # [    2.416690] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.418010] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.422626] usb usb2: Product: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.423422] usb usb2: Manufacturer: Linux 6.18.55 ehci_hcd
vm-test-run-update-hardware-configuration> target # [    2.425611] usb usb2: SerialNumber: 0000:00:1d.7
vm-test-run-update-hardware-configuration> target # [    2.427680] hub 2-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.428880] hub 2-0:1.0: 6 ports detected
vm-test-run-update-hardware-configuration> target # [    2.236926] systemd-vconsole-setup[104]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [    2.240122] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    2.454958] hub 1-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.456213] hub 1-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.460088] uhci_hcd 0000:00:1d.1: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.461103] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
vm-test-run-update-hardware-configuration> target # [    2.475849] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
vm-test-run-update-hardware-configuration> target # [    2.286185] (udev-worker)[90]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.482771] uhci_hcd 0000:00:1d.1: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.291763] (udev-worker)[94]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.495694] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220
vm-test-run-update-hardware-configuration> target # [    2.510676] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.512169] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.334080] systemd[1]: Found device /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.336481] systemd[1]: Reached target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    2.340263] systemd[1]: Starting Make File System on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.536361] usb usb3: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.537515] usb usb3: Manufacturer: Linux 6.18.55 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.556143] usb usb3: SerialNumber: 0000:00:1d.1
vm-test-run-update-hardware-configuration> target # [    2.558784] hub 3-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.369458] systemd-makefs[109]: Formatting /dev/vdb as ext4
vm-test-run-update-hardware-configuration> target # [    2.566613] hub 3-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.573954] uhci_hcd 0000:00:1d.2: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.575042] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
vm-test-run-update-hardware-configuration> target # [    2.578455] uhci_hcd 0000:00:1d.2: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.579869] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240
vm-test-run-update-hardware-configuration> target # [    2.391309] systemd-makefs[109]: /dev/vdb successfully formatted as ext4 (label "vdb", uuid 5fdf3e79-8599-43b2-8933-fecc9c7775fc)
vm-test-run-update-hardware-configuration> target # [    2.396797] systemd[1]: Finished Make File System on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.401250] systemd[1]: Starting File System Check on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.598107] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.604403] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.613715] usb usb4: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.617653] usb usb4: Manufacturer: Linux 6.18.55 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.622650] usb usb4: SerialNumber: 0000:00:1d.2
vm-test-run-update-hardware-configuration> target # [    2.433135] systemd-fsck[118]: vdb: clean, 12/32768 files, 6385/131072 blocks
vm-test-run-update-hardware-configuration> target # [    2.629854] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
vm-test-run-update-hardware-configuration> target # [    2.438759] systemd[1]: Finished File System Check on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.636652] hub 4-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.639388] hub 4-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.642050] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
vm-test-run-update-hardware-configuration> target # [    2.646207] ahci 0000:00:1f.2: flags: 64bit ncq only
vm-test-run-update-hardware-configuration> target # [    2.662846] scsi host0: ahci
vm-test-run-update-hardware-configuration> target # [    2.665688] scsi host1: ahci
vm-test-run-update-hardware-configuration> target # [    2.667627] usb 2-1: new high-speed USB device number 2 using ehci-pci
vm-test-run-update-hardware-configuration> target # [    2.669026] scsi host2: ahci
vm-test-run-update-hardware-configuration> target # [    2.677705] scsi host3: ahci
vm-test-run-update-hardware-configuration> target # [    2.680986] scsi host4: ahci
vm-test-run-update-hardware-configuration> target # [    2.686704] scsi host5: ahci
vm-test-run-update-hardware-configuration> target # [    2.687463] ata1: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd100 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.697507] ata2: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd180 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.702432] ata3: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd200 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.708657] ata4: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd280 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.711620] ata5: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd300 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.715701] ata6: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd380 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.588450] systemd[1]: Mounting /sysroot...
vm-test-run-update-hardware-configuration> target # [    2.802931] usb 2-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
vm-test-run-update-hardware-configuration> target # [    2.804491] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
vm-test-run-update-hardware-configuration> target # [    2.806285] usb 2-1: Product: QEMU USB Tablet
vm-test-run-update-hardware-configuration> target # [    2.807470] usb 2-1: Manufacturer: QEMU
vm-test-run-update-hardware-configuration> target # [    2.808353] usb 2-1: SerialNumber: 28754-0000:00:1d.7-1
vm-test-run-update-hardware-configuration> target # [    2.823043] hid: raw HID events driver (C) Jiri Kosina
vm-test-run-update-hardware-configuration> target # [    3.026077] ata6: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.027272] ata1: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.028655] ata4: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.029822] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.030913] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
vm-test-run-update-hardware-configuration> target # [    3.032028] ata3.00: applying bridge limits
vm-test-run-update-hardware-configuration> target # [    3.033016] ata2: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.034203] ata5: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    3.036113] ata3.00: configured for UDMA/100
vm-test-run-update-hardware-configuration> target # [    3.037350] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
vm-test-run-update-hardware-configuration> target # [    3.099679] usbcore: registered new interface driver usbhid
vm-test-run-update-hardware-configuration> target # [    3.103119] usbhid: USB HID core driver
vm-test-run-update-hardware-configuration> target # [    3.126537] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input2
vm-test-run-update-hardware-configuration> target # [    3.144370] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
vm-test-run-update-hardware-configuration> target # [    3.147618] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
vm-test-run-update-hardware-configuration> target # [    3.150324] EXT4-fs (vdb): mounted filesystem 5fdf3e79-8599-43b2-8933-fecc9c7775fc r/w with ordered data mode. Quota mode: none.
vm-test-run-update-hardware-configuration> target # [    2.961621] systemd[1]: Mounted /sysroot.
vm-test-run-update-hardware-configuration> target # [    2.965080] systemd[1]: Reached target Initrd Root File System.
vm-test-run-update-hardware-configuration> target # [    2.967270] systemd[1]: Starting Mountpoints Configured in the Real Root...
vm-test-run-update-hardware-configuration> target # [    3.169595] cdrom: Uniform CD-ROM driver Revision: 3.20
vm-test-run-update-hardware-configuration> target # [    2.986357] systemd-sysroot-fstab-check[149]: /sysroot should be mounted in the initrd, will request daemon-reload.
vm-test-run-update-hardware-configuration> target # [    2.991637] systemd[1]: Reload requested from client PID 149 ('systemd-sysroot') (unit initrd-parse-etc.service)...
vm-test-run-update-hardware-configuration> target # [    2.993665] systemd[1]: Reloading...
vm-test-run-update-hardware-configuration> target # [    3.067413] systemd[1]: Reloading finished in 76 ms.
vm-test-run-update-hardware-configuration> target # [    3.076438] systemd-sysroot-fstab-check[149]: Requesting initrd-fs.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    3.081271] systemd-sysroot-fstab-check[149]: Requesting swap.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    3.086812] systemd[1]: initrd-parse-etc.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.093181] systemd[1]: Finished Mountpoints Configured in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.094710] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.
vm-test-run-update-hardware-configuration> target # [    3.588090] systemd[1]: Mounting /sysroot/nix/.ro-store...
vm-test-run-update-hardware-configuration> target # [    3.590942] systemd[1]: Mounting /sysroot/nix/.rw-store...
vm-test-run-update-hardware-configuration> target # [    3.595672] systemd[1]: Mounting /sysroot/run...
vm-test-run-update-hardware-configuration> target # [    3.596771] systemd[1]: Mounting /sysroot/tmp/shared...
vm-test-run-update-hardware-configuration> target # [    3.603465] systemd[1]: Mounting /sysroot/tmp/xchg...
vm-test-run-update-hardware-configuration> target # [    3.622469] systemd[1]: Mounted /sysroot/nix/.rw-store.
vm-test-run-update-hardware-configuration> target # [    3.627851] systemd[1]: Mounted /sysroot/nix/.ro-store.
vm-test-run-update-hardware-configuration> target # [    3.629761] systemd[1]: Mounted /sysroot/run.
vm-test-run-update-hardware-configuration> target # [    3.631774] systemd[1]: Mounted /sysroot/tmp/shared.
vm-test-run-update-hardware-configuration> target # [    3.634322] systemd[1]: Mounted /sysroot/tmp/xchg.
vm-test-run-update-hardware-configuration> target # [    3.638361] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    3.647121] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.648949] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    3.651156] systemd[1]: Mounting /sysroot/nix/store...
vm-test-run-update-hardware-configuration> target # [    3.667893] systemd[1]: Mounted /sysroot/nix/store.
vm-test-run-update-hardware-configuration> target # [    3.669628] systemd[1]: Reached target Initrd File Systems.
vm-test-run-update-hardware-configuration> target # [    3.670912] systemd[1]: Starting Find NixOS closure...
vm-test-run-update-hardware-configuration> target # [    3.673741] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...
vm-test-run-update-hardware-configuration> target # [    3.690379] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.694250] systemd[1]: Finished Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    3.695702] systemd[1]: Reached target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    3.697635] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...
vm-test-run-update-hardware-configuration> target # [    3.708385] systemd[1]: Stopped target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    3.709986] systemd[1]: Stopped target Basic System.
vm-test-run-update-hardware-configuration> target # [    3.711297] systemd[1]: Stopped target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    3.713139] systemd[1]: Stopped target Path Units.
vm-test-run-update-hardware-configuration> target # [    3.714092] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.715530] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    3.717232] systemd[1]: Stopped target Slice Units.
vm-test-run-update-hardware-configuration> target # [    3.718524] systemd[1]: Stopped target Socket Units.
vm-test-run-update-hardware-configuration> target # [    3.719904] systemd[1]: Stopped target System Initialization.
vm-test-run-update-hardware-configuration> target # [    3.721385] systemd[1]: Stopped target Swaps.
vm-test-run-update-hardware-configuration> target # [    3.722843] systemd[1]: Stopped target Timer Units.
vm-test-run-update-hardware-configuration> target # [    3.723870] systemd[1]: dbus.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.725206] systemd[1]: Closed D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    3.727169] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.728615] systemd[1]: Stopped Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    3.729592] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    3.730698] systemd[1]: systemd-sysctl.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.732154] systemd[1]: Stopped Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    3.734149] systemd[1]: systemd-modules-load.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.735447] systemd[1]: Stopped Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    3.736458] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.737857] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    3.739360] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.741224] systemd[1]: Stopped Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    3.743032] systemd[1]: Stopped target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    3.744145] systemd[1]: Stopped target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    3.748072] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.749435] systemd[1]: Stopped Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    3.750619] systemd[1]: Stopping Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    3.754473] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.755804] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    3.762862] systemd[1]: initrd-cleanup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.765357] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.
vm-test-run-update-hardware-configuration> target # [    3.766790] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.769880] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    3.774323] systemd[1]: systemd-udevd.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.777104] systemd[1]: Stopped Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    3.778434] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.780079] systemd[1]: Closed udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    3.781551] systemd[1]: Starting Cleanup udev Database...
vm-test-run-update-hardware-configuration> target # [    3.783191] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.784661] systemd[1]: Stopped Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    3.786184] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.788179] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    3.789521] systemd[1]: kmod-static-nodes.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.790976] systemd[1]: Stopped Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    3.803735] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.805955] systemd[1]: Finished Cleanup udev Database.
vm-test-run-update-hardware-configuration> target # [    3.808125] systemd[1]: Reached target Switch Root.
vm-test-run-update-hardware-configuration> target # [    3.809762] systemd[1]: Starting NixOS Activation...
vm-test-run-update-hardware-configuration> target # [    3.858992] initrd-nixos-activation-start[201]: booting system configuration /nix/store/mxfhhk9z4c10xy213ialazjgblgi2l4i-nixos-system-target-test
vm-test-run-update-hardware-configuration> target # [    3.880622] initrd-nixos-activation-start[201]: running activation script...
vm-test-run-update-hardware-configuration> target # [    4.039465] initrd-nixos-activation-start[224]: setting up /etc...
vm-test-run-update-hardware-configuration> target # [    4.136744] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.139150] systemd[1]: Finished NixOS Activation.
vm-test-run-update-hardware-configuration> target # [    4.140942] systemd[1]: Starting Switch Root...
vm-test-run-update-hardware-configuration> target # [    4.153952] systemd[1]: Switching root.
vm-test-run-update-hardware-configuration> target # [    4.471351] systemd-journald[65]: Received SIGTERM from PID 1 (systemd).
vm-test-run-update-hardware-configuration> target # [    4.597747] NET: Registered PF_VSOCK protocol family
vm-test-run-update-hardware-configuration> target # [    4.965206] systemd[1]: systemd 261.3 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    4.969711] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    4.970592] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    4.971510] systemd[1]: Detected first boot.
vm-test-run-update-hardware-configuration> target # [    4.973060] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    5.048426] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    5.110523] systemd[1]: Applying preset policy.
vm-test-run-update-hardware-configuration> target # [    5.261932] systemd[1]: Populated /etc with preset unit settings.
vm-test-run-update-hardware-configuration> target # [    5.458432] systemd[1]: initrd-switch-root.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.460262] systemd[1]: Stopped initrd-switch-root.service.
vm-test-run-update-hardware-configuration> target # [    5.463089] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
vm-test-run-update-hardware-configuration> target # [    5.465342] systemd[1]: Created slice Slice /system/getty.
vm-test-run-update-hardware-configuration> target # [    5.466868] systemd[1]: Created slice User and Session Slice.
vm-test-run-update-hardware-configuration> target # [    5.468041] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    5.469614] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
vm-test-run-update-hardware-configuration> target # [    5.470966] systemd[1]: Expecting device /dev/hvc0...
vm-test-run-update-hardware-configuration> target # [    5.471894] systemd[1]: Expecting device /dev/ttyS0...
vm-test-run-update-hardware-configuration> target # [    5.472863] systemd[1]: Reached target Local Encrypted Volumes.
vm-test-run-update-hardware-configuration> target # [    5.473907] systemd[1]: Stopped target initrd-fs.target.
vm-test-run-update-hardware-configuration> target # [    5.474872] systemd[1]: Stopped target initrd-root-fs.target.
vm-test-run-update-hardware-configuration> target # [    5.475887] systemd[1]: Stopped target initrd-switch-root.target.
vm-test-run-update-hardware-configuration> target # [    5.476984] systemd[1]: Reached target Virtual Machines and Containers.
vm-test-run-update-hardware-configuration> target # [    5.478146] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    5.479061] systemd[1]: Reached target Remote File Systems.
vm-test-run-update-hardware-configuration> target # [    5.480074] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    5.480996] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    5.483070] systemd[1]: Listening on Query the User Interactively for a Password.
vm-test-run-update-hardware-configuration> target # [    5.485648] systemd[1]: Listening on Process Core Dump Socket.
vm-test-run-update-hardware-configuration> target # [    5.487617] systemd[1]: Listening on Credential Encryption/Decryption.
vm-test-run-update-hardware-configuration> target # [    5.489640] systemd[1]: Listening on Factory Reset Management.
vm-test-run-update-hardware-configuration> target # [    5.490767] systemd[1]: Listening on Hostname Service Socket.
vm-test-run-update-hardware-configuration> target # [    5.493773] systemd[1]: Starting Journal Log Access Socket...
vm-test-run-update-hardware-configuration> target # [    5.495158] systemd[1]: Listening on Journal Audit Socket.
vm-test-run-update-hardware-configuration> target # [    5.497843] systemd[1]: Listening on Console Output Muting Service Socket.
vm-test-run-update-hardware-configuration> target # [    5.499162] systemd[1]: Listening on Network Management Metrics Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    5.500668] systemd[1]: Listening on Network Management Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    5.501913] systemd[1]: Listening on Network Management Netlink Socket.
vm-test-run-update-hardware-configuration> target # [    5.503216] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
vm-test-run-update-hardware-configuration> target # [    5.504564] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    5.506113] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
vm-test-run-update-hardware-configuration> target # [    5.510155] systemd[1]: Listening on Disk Repartitioning Service Socket.
vm-test-run-update-hardware-configuration> target # [    5.511413] systemd[1]: Listening on Resolve Monitor Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    5.512625] systemd[1]: Listening on Resolve Service Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    5.513814] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    5.514888] systemd[1]: Listening on udev Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    5.517136] systemd[1]: Mounting Huge Pages File System...
vm-test-run-update-hardware-configuration> target # [    5.520923] systemd[1]: Mounting POSIX Message Queue File System...
vm-test-run-update-hardware-configuration> target # [    5.527569] systemd[1]: Mounting Kernel Debug File System...
vm-test-run-update-hardware-configuration> target # [    5.534790] systemd[1]: Mounting Kernel Trace File System...
vm-test-run-update-hardware-configuration> target # [    5.545067] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    5.560490] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    5.568654] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
vm-test-run-update-hardware-configuration> target # [    5.573028] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore
vm-test-run-update-hardware-configuration> target # [    5.576630] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [    5.586532] systemd[1]: Mounting FUSE Control File System...
vm-test-run-update-hardware-configuration> target # [    5.591276] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
vm-test-run-update-hardware-configuration> target # [    5.598327] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    5.600701] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    5.612029] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...
vm-test-run-update-hardware-configuration> target # [    5.625996] systemd[1]: Starting Remount Root and Kernel File Systems...
vm-test-run-update-hardware-configuration> target # [    5.631411] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    5.643357] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    5.655849] systemd[1]: Listening on Journal Log Access Socket.
vm-test-run-update-hardware-configuration> target # [    5.659687] systemd[1]: Mounted Huge Pages File System.
vm-test-run-update-hardware-configuration> target # [    5.663264] loop: module loaded
vm-test-run-update-hardware-configuration> target # [    5.664235] systemd[1]: Mounted POSIX Message Queue File System.
vm-test-run-update-hardware-configuration> target # [    5.665537] systemd-journald[294]: Collecting audit messages is enabled.
vm-test-run-update-hardware-configuration> target # [    5.672417] systemd[1]: Mounted Kernel Debug File System.
vm-test-run-update-hardware-configuration> target # [    5.679324] systemd[1]: Mounted Kernel Trace File System.
vm-test-run-update-hardware-configuration> target # [    5.692640] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    5.704900] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.711187] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    5.720582] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    5.527553] systemd[1]: Queued start job for default target Multi-User System.
vm-test-run-update-hardware-configuration> target # [    5.529744] systemd[1]: Unnecessary job was removed for /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    5.532883] systemd[1]: systemd-journald.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.728798] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    5.535886] systemd-modules-load[295]: Inserted module 'loop'
vm-test-run-update-hardware-configuration> target # [    5.741483] EXT4-fs (vdb): re-mounted 5fdf3e79-8599-43b2-8933-fecc9c7775fc.
vm-test-run-update-hardware-configuration> target # [    5.559060] systemd[1]: Mounting Kernel Configuration File System...
vm-test-run-update-hardware-configuration> target # [    5.565098] systemd[1]: Starting Firewall...
vm-test-run-update-hardware-configuration> target # [    5.566595] systemd-oomd[296]: No swap; memory pressure usage will be degraded
vm-test-run-update-hardware-configuration> target # [    5.571830] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    5.577369] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    5.584092] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.
vm-test-run-update-hardware-configuration> target # [    5.585425] systemd[1]: Mounted FUSE Control File System.
vm-test-run-update-hardware-configuration> target # [    5.600179] systemd[1]: Finished Remount Root and Kernel File Systems.
vm-test-run-update-hardware-configuration> target # [    5.622604] systemd[1]: Listening on Disk Image Download Service Socket.
vm-test-run-update-hardware-configuration> target # [    5.636364] systemd[1]: Starting Flush Journal to Persistent Storage...
vm-test-run-update-hardware-configuration> target # [    5.641245] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore
vm-test-run-update-hardware-configuration> target # [    5.650158] systemd[1]: Starting Load/Save OS Random Seed...
vm-test-run-update-hardware-configuration> target # [    5.652276] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    5.736291] systemd[1]: Mounted Kernel Configuration File System.
vm-test-run-update-hardware-configuration> target # [    5.934886] systemd-journald[294]: Received client request to flush runtime journal.
vm-test-run-update-hardware-configuration> target # [    5.953487] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    5.960116] systemd[1]: Starting Network Name Resolution...
vm-test-run-update-hardware-configuration> target # [    5.961802] systemd[1]: Finished Load/Save OS Random Seed.
vm-test-run-update-hardware-configuration> target # [    5.964899] systemd[1]: Reached target First Boot Complete.
vm-test-run-update-hardware-configuration> target # [    5.965954] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    5.967498] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    5.969858] systemd-resolved[321]: Positive Trust Anchors:
vm-test-run-update-hardware-configuration> target # [    5.972301] systemd-resolved[321]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
vm-test-run-update-hardware-configuration> target # [    5.975231] systemd-resolved[321]: . IN DS 38696 8 2 683d2d0acb8c9b712a1948b27f741219298d0a450d612c483af444a4c0fb2b16
vm-test-run-update-hardware-configuration> target # [    5.977269] systemd-resolved[321]: Negative trust anchors: home.arpa 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 170.0.0.192.in-addr.arpa 171.0.0.192.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa ipv4only.arpa resolver.arpa corp home internal intranet lan local private test
vm-test-run-update-hardware-configuration> target # [    5.997433] systemd[1]: Finished Flush Journal to Persistent Storage.
vm-test-run-update-hardware-configuration> target # [    6.004806] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    6.027092] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    6.030521] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    6.034440] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    6.039535] systemd-resolved[321]: Using system hostname 'target'.
vm-test-run-update-hardware-configuration> target # [    6.043854] systemd[1]: Started Network Name Resolution.
vm-test-run-update-hardware-configuration> target # [    6.076254] systemd-udevd[338]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    6.118312] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    6.239856] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [    6.270189] systemd[1]: Mounting /run/wrappers...
vm-test-run-update-hardware-configuration> target # [    6.309171] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.
vm-test-run-update-hardware-configuration> target # [    6.374919] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.
vm-test-run-update-hardware-configuration> target # [    6.392181] systemd[1]: Mounted /run/wrappers.
vm-test-run-update-hardware-configuration> target # [    6.393620] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    6.400138] systemd[1]: Listening on Boot Loader Control Service Socket.
vm-test-run-update-hardware-configuration> target # [    6.406116] systemd[1]: Starting register-nix-paths.service...
vm-test-run-update-hardware-configuration> target # [    6.410961] systemd[1]: Starting Create SUID/SGID Wrappers...
vm-test-run-update-hardware-configuration> target # [    6.412186] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.
vm-test-run-update-hardware-configuration> target # [    6.417552] systemd[1]: Starting Save Transient machine-id to Disk...
vm-test-run-update-hardware-configuration> target # [    6.430309] (udev-worker)[364]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    6.435817] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    6.437358] (udev-worker)[374]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    6.560442] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    6.578176] systemd[1]: Starting Rebuild Journal Catalog...
vm-test-run-update-hardware-configuration> target # [    6.583577] systemd[1]: Starting Record System Boot/Shutdown in UTMP...
vm-test-run-update-hardware-configuration> target # [    6.673399] systemd[1]: Finished Record System Boot/Shutdown in UTMP.
vm-test-run-update-hardware-configuration> target # [    6.694797] systemd[1]: Finished Rebuild Journal Catalog.
vm-test-run-update-hardware-configuration> target # [    6.702708] systemd[1]: Starting Update is Completed...
vm-test-run-update-hardware-configuration> target # [    6.761109] systemd[1]: Finished Update is Completed.
vm-test-run-update-hardware-configuration> target # [    7.141321] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console
vm-test-run-update-hardware-configuration> target # [    7.150790] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
vm-test-run-update-hardware-configuration> target # [    7.012760] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    7.020671] systemd[1]: Finished Save Transient machine-id to Disk.
vm-test-run-update-hardware-configuration> target # [    7.074605] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    7.079072] systemd[1]: Finished Create SUID/SGID Wrappers.
vm-test-run-update-hardware-configuration> target # [    7.143138] systemd[1]: Finished register-nix-paths.service.
vm-test-run-update-hardware-configuration> target # [    7.144352] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    7.148251] systemd[1]: Started Discard unused filesystem blocks once a week.
vm-test-run-update-hardware-configuration> target # [    7.149656] systemd[1]: Started Daily Cleanup of Temporary Directories.
vm-test-run-update-hardware-configuration> target # [    7.152231] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    7.169594] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    7.190427] mousedev: PS/2 mouse device common for all mice
vm-test-run-update-hardware-configuration> target # [    7.206518] ACPI: button: Power Button [PWRF]
vm-test-run-update-hardware-configuration> target # [    7.322931] rtc_cmos PNP0B00:00: RTC can wake from S4
vm-test-run-update-hardware-configuration> target # [    7.183343] systemd[1]: Listening on Nix Daemon Socket.
vm-test-run-update-hardware-configuration> target # [    7.184884] systemd-resolved[321]: Clock change detected. Flushing caches.
vm-test-run-update-hardware-configuration> target # [    7.193584] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).
vm-test-run-update-hardware-configuration> target # [    7.198634] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.
vm-test-run-update-hardware-configuration> target # [    7.200450] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    7.203407] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    7.205407] systemd[1]: Started backdoor.service.
vm-test-run-update-hardware-configuration> target # [    7.211168] systemd[1]: Starting Import lastlog data into lastlog2 database...
vm-test-run-update-hardware-configuration> target # [    7.213609] systemd[1]: Starting Name Service Cache Daemon (nsncd)...
vm-test-run-update-hardware-configuration> target # [    7.216710] systemd[1]: Starting Post-Boot Actions...
vm-test-run-update-hardware-configuration> target # [    7.324438] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
vm-test-run-update-hardware-configuration> target # [    7.334549] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:07.0/virtio5/input/input4
vm-test-run-update-hardware-configuration> target # [    7.219844] systemd[1]: Started Reset console on configuration changes.
vm-test-run-update-hardware-configuration> target # [    7.235272] systemd[1]: Starting SSH Host Keys Generation...
vm-test-run-update-hardware-configuration> target # connecting to host...
vm-test-run-update-hardware-configuration> target # [    7.346275] rtc_cmos PNP0B00:00: registered as rtc0
vm-test-run-update-hardware-configuration> target # [    7.347701] rtc_cmos PNP0B00:00: setting system clock to 2026-10-13T16:55:16 UTC (1791910516)
vm-test-run-update-hardware-configuration> target # [    7.347813] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
vm-test-run-update-hardware-configuration> target # [    7.298308] systemd[1]: Starting D-Bus System Message Bus...
vm-test-run-update-hardware-configuration> target # [    7.305816] systemd[1]: Finished Post-Boot Actions.
vm-test-run-update-hardware-configuration> target # [    7.318630] nsncd[509]: Oct 13 16:55:16.663 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"
vm-test-run-update-hardware-configuration> target # [    7.328596] systemd[1]: Started Name Service Cache Daemon (nsncd).
vm-test-run-update-hardware-configuration> target # [    7.335236] systemd[1]: Reached target Host and Network Name Lookups.
vm-test-run-update-hardware-configuration> target # [    7.336458] systemd[1]: Reached target User and Group Name Lookups.
vm-test-run-update-hardware-configuration> target # [    7.355166] systemd[1]: Starting User Login Management...
vm-test-run-update-hardware-configuration> target # [    7.358560] systemd[1]: Finished Import lastlog data into lastlog2 database.
vm-test-run-update-hardware-configuration> target # [    7.420116] systemd[1]: Finished Firewall.
vm-test-run-update-hardware-configuration> target # [    7.421035] systemd[1]: Reached target Preparation for Network.
vm-test-run-update-hardware-configuration> target # [    7.422138] systemd[1]: Listening on Network Management Resolve Hook Socket.
vm-test-run-update-hardware-configuration> target # [    7.348861] systemd-journald[294]: Time jumped backwards, rotating.
vm-test-run-update-hardware-configuration> target # [    7.358307] parport_pc 00:02: reported by Plug and Play ACPI
vm-test-run-update-hardware-configuration> target # [    7.373955] Console: switching to colour dummy device 80x25
vm-test-run-update-hardware-configuration> target # [    7.470415] systemd[1]: Starting Network Management...
vm-test-run-update-hardware-configuration> target # [    7.507301] dbus-broker-launch[528]: Looking up NSS user entry for 'systemd-timesync'...
vm-test-run-update-hardware-configuration> target # [    7.511872] dbus-broker-launch[528]: NSS returned no entry for 'systemd-timesync'
vm-test-run-update-hardware-configuration> target # [    7.515522] dbus-broker-launch[528]: Invalid user-name in /nix/store/ra68nra5wgjxid9mbh848fyjsjivysbb-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"
vm-test-run-update-hardware-configuration> target # [    7.389462] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
vm-test-run-update-hardware-configuration> target # [    7.717770] [drm] Found bochs VGA, ID 0xb0c5.
vm-test-run-update-hardware-configuration> target # [    7.717772] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
vm-test-run-update-hardware-configuration> target # [    7.743276] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic
vm-test-run-update-hardware-configuration> target # [    7.744196] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0
vm-test-run-update-hardware-configuration> target # [    7.754555] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6
vm-test-run-update-hardware-configuration> target # [    7.755684] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5
vm-test-run-update-hardware-configuration> target # [    7.569506] systemd-logind[550]: New seat seat0.
vm-test-run-update-hardware-configuration> target # [    7.576242] systemd[1]: Started User Login Management.
vm-test-run-update-hardware-configuration> target # [    7.582074] systemd[1]: Starting linger-users.service...
vm-test-run-update-hardware-configuration> target # [    7.591284] systemd[1]: Started D-Bus System Message Bus.
vm-test-run-update-hardware-configuration> target # [    7.795124] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
vm-test-run-update-hardware-configuration> target # [    7.795987] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
vm-test-run-update-hardware-configuration> target # [    7.624891] dbus-broker-launch[528]: Ready
vm-test-run-update-hardware-configuration> target # [    7.661268] systemd[1]: linger-users.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    7.666374] systemd[1]: Finished linger-users.service.
vm-test-run-update-hardware-configuration> target # [    7.714145] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    8.857538] clocksource: Long readout interval, skipping watchdog check: cs_nsec: 1006170458 wd_nsec: 1006169968
vm-test-run-update-hardware-configuration> target # [    8.877991] cfg80211: Loading compiled-in X.509 certificates for regulatory database
vm-test-run-update-hardware-configuration> target # [    8.913707] Console: switching to colour frame buffer device 160x50
vm-test-run-update-hardware-configuration> target # [    8.924374] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device
vm-test-run-update-hardware-configuration> target # [    8.706084] sshd-keygen-start[554]: Generating public/private rsa key pair.
vm-test-run-update-hardware-configuration> target # [    8.732426] sshd-keygen-start[554]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key
vm-test-run-update-hardware-configuration> target # [    8.734039] sshd-keygen-start[554]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
vm-test-run-update-hardware-configuration> target # [    8.735521] sshd-keygen-start[554]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [    8.736591] sshd-keygen-start[554]: SHA256:GUhpMVz8FGDMr7bXnev6ET1octRL6f+icF28mViUW8Q root@target
vm-test-run-update-hardware-configuration> target # [    8.738173] sshd-keygen-start[554]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [    8.739352] sshd-keygen-start[554]: +---[RSA 4096]----+
vm-test-run-update-hardware-configuration> target # [    8.740350] sshd-keygen-start[554]: |     .+B+...   ..|
vm-test-run-update-hardware-configuration> target # [    8.741296] sshd-keygen-start[554]: |     .+++ .   ..E|
vm-test-run-update-hardware-configuration> target # [    8.742289] sshd-keygen-start[554]: |     .. .+   . *.|
vm-test-run-update-hardware-configuration> target # [    8.743237] sshd-keygen-start[554]: |         oo . =o+|
vm-test-run-update-hardware-configuration> target # [    8.744174] sshd-keygen-start[554]: |        S. . +.*+|
vm-test-run-update-hardware-configuration> target # [    8.745116] sshd-keygen-start[554]: |        o   +.oo*|
vm-test-run-update-hardware-configuration> target # [    8.746046] sshd-keygen-start[554]: |       . ....oo=.|
vm-test-run-update-hardware-configuration> target # [    8.746989] sshd-keygen-start[554]: |        . .o. +..|
vm-test-run-update-hardware-configuration> target # [    8.747916] sshd-keygen-start[554]: |         .  o=+o.|
vm-test-run-update-hardware-configuration> target # [    8.751422] sshd-keygen-start[554]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [    8.972989] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
vm-test-run-update-hardware-configuration> target # [    8.973855] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
vm-test-run-update-hardware-configuration> target # [    8.977848] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
vm-test-run-update-hardware-configuration> target # [    8.979039] cfg80211: failed to load regulatory.db
vm-test-run-update-hardware-configuration> target # [    8.815551] sshd-keygen-start[586]: Generating public/private ed25519 key pair.
vm-test-run-update-hardware-configuration> target # [    8.816846] sshd-keygen-start[586]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
vm-test-run-update-hardware-configuration> target # [    8.818384] sshd-keygen-start[586]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
vm-test-run-update-hardware-configuration> target # [    8.819884] sshd-keygen-start[586]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [    8.821056] sshd-keygen-start[586]: SHA256:1onc6ZpRM+l8KvZozdNgnNAgYiFTeSk/H8QDE8R+/ME root@target
vm-test-run-update-hardware-configuration> target # [    8.822492] sshd-keygen-start[586]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [    8.823567] sshd-keygen-start[586]: +--[ED25519 256]--+
vm-test-run-update-hardware-configuration> target # [    8.824505] sshd-keygen-start[586]: |  o.o===         |
vm-test-run-update-hardware-configuration> target # [    8.825442] sshd-keygen-start[586]: |   o= =.=        |
vm-test-run-update-hardware-configuration> target # [    8.827767] sshd-keygen-start[586]: |   . * + =       |
vm-test-run-update-hardware-configuration> target # [    8.828982] sshd-keygen-start[586]: |      +.=+E+     |
vm-test-run-update-hardware-configuration> target # [    8.830596] sshd-keygen-start[586]: |       +S=Xo     |
vm-test-run-update-hardware-configuration> target # [    8.831552] sshd-keygen-start[586]: |       ..=*o     |
vm-test-run-update-hardware-configuration> target # [    8.832905] sshd-keygen-start[586]: |        .++o.    |
vm-test-run-update-hardware-configuration> target # [    8.835425] sshd-keygen-start[586]: |        +=+o.    |
vm-test-run-update-hardware-configuration> target # [    8.836406] sshd-keygen-start[586]: |       o+oo.     |
vm-test-run-update-hardware-configuration> target # [    8.837577] sshd-keygen-start[586]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [    8.841305] systemd[1]: sshd-keygen.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    8.843385] systemd[1]: Finished SSH Host Keys Generation.
vm-test-run-update-hardware-configuration> target # [    8.862836] systemd-logind[550]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)
vm-test-run-update-hardware-configuration> target # [    8.866954] systemd-networkd[565]: lo: Link UP
vm-test-run-update-hardware-configuration> target # [    8.868538] systemd-networkd[565]: lo: Gained carrier
vm-test-run-update-hardware-configuration> target # [    8.875417] systemd-networkd[565]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [    8.878060] systemd-networkd[565]: eth1: Configuring with /etc/systemd/network/40-eth1.network.
vm-test-run-update-hardware-configuration> target # [    8.879539] systemd[1]: Started Network Management.
vm-test-run-update-hardware-configuration> target # [    8.886335] systemd[1]: Reached target Network.
vm-test-run-update-hardware-configuration> target # [    8.887316] systemd-networkd[565]: eth0: Configuring with /etc/systemd/network/99-ethernet-default-dhcp.network.
vm-test-run-update-hardware-configuration> target # [    8.895175] systemd-networkd[565]: eth1: Link UP
vm-test-run-update-hardware-configuration> target # [    8.897295] systemd[1]: Starting SSH Daemon...
vm-test-run-update-hardware-configuration> target # [    8.899568] systemd-networkd[565]: eth1: Gained carrier
vm-test-run-update-hardware-configuration> target # [    8.900573] systemd-networkd[565]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [    8.903976] systemd-logind[550]: Watching system buttons on /dev/input/event2 (Power Button)
vm-test-run-update-hardware-configuration> target # [    8.909372] systemd[1]: Starting Enable Persistent Storage in systemd-networkd...
vm-test-run-update-hardware-configuration> target # [    8.919556] systemd[1]: Starting Permit User Sessions...
vm-test-run-update-hardware-configuration> target # [    8.929357] systemd-logind[550]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)
vm-test-run-update-hardware-configuration> target # [    9.132345] NET: Registered PF_PACKET protocol family
vm-test-run-update-hardware-configuration> target # [    8.947122] systemd-networkd[565]: eth0: Link UP
vm-test-run-update-hardware-configuration> target # [    8.949545] systemd-networkd[565]: eth0: Gained carrier
vm-test-run-update-hardware-configuration> target # [    8.968152] systemd-networkd[565]: eth0: DHCPv4 address 10.0.2.15/24, gateway 10.0.2.2 acquired from 10.0.2.2
vm-test-run-update-hardware-configuration> target # [    9.000086] systemd[1]: Finished Permit User Sessions.
vm-test-run-update-hardware-configuration> target # [    9.010331] systemd[1]: Started Getty on tty1.
vm-test-run-update-hardware-configuration> target # [    9.011304] systemd[1]: Reached target Login Prompts.
vm-test-run-update-hardware-configuration> target # [    9.016336] systemd[1]: Finished Enable Persistent Storage in systemd-networkd.
vm-test-run-update-hardware-configuration> target # [    9.023190] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.025286] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    9.228359] ppdev: user-space parallel port driver
vm-test-run-update-hardware-configuration> target # [    9.035456] sshd[589]: Server listening on 0.0.0.0 port 22.
vm-test-run-update-hardware-configuration> target # [    9.036710] sshd[589]: Server listening on :: port 22.
vm-test-run-update-hardware-configuration> target # [    9.041383] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    9.042957] systemd[1]: Started SSH Daemon.
vm-test-run-update-hardware-configuration> target # [    9.047342] systemd[1]: Reached target Multi-User System.
vm-test-run-update-hardware-configuration> target # [    9.262894] iTCO_wdt iTCO_wdt.0.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
vm-test-run-update-hardware-configuration> target # [    9.281499] kvm_amd: TSC scaling supported
vm-test-run-update-hardware-configuration> target # [    9.282033] kvm_amd: Nested Virtualization enabled
vm-test-run-update-hardware-configuration> target # [    9.283080] kvm_amd: Nested Paging enabled
vm-test-run-update-hardware-configuration> target # [    9.283643] kvm_amd: LBR virtualization supported
vm-test-run-update-hardware-configuration> target # [    9.284227] kvm_amd: Virtual GIF supported
vm-test-run-update-hardware-configuration> target # [    9.284795] kvm_amd: Virtual NMI enabled
vm-test-run-update-hardware-configuration> target # [    9.288746] iTCO_wdt iTCO_wdt.0.auto: initialized. heartbeat=30 sec (nowayout=0)
vm-test-run-update-hardware-configuration> target # [    9.098575] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
vm-test-run-update-hardware-configuration> target # [    9.112175] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.115188] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    9.124721] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    9.352775] EDAC MC: Ver: 3.0.0
vm-test-run-update-hardware-configuration> target # [    9.277449] systemd-vconsole-setup[602]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [    9.281704] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    9.286052] systemd[1]: Startup finished in 974ms (kernel) + 3.411s (initrd) + 4.899s (userspace) = 9.285s.
vm-test-run-update-hardware-configuration> target # [   10.228206] systemd-networkd[565]: eth0: Gained IPv6LL
vm-test-run-update-hardware-configuration> target # [   10.546422] systemd-networkd[565]: eth1: Gained IPv6LL
vm-test-run-update-hardware-configuration> target: waiting for TCP port 22 on localhost
vm-test-run-update-hardware-configuration> target: waiting for the VM to finish booting
vm-test-run-update-hardware-configuration> target: Guest shell says: b'Spawning backdoor root shell...\n'
vm-test-run-update-hardware-configuration> target: connected to guest root shell
vm-test-run-update-hardware-configuration> target: (connecting took 0.00 seconds)
vm-test-run-update-hardware-configuration> target: (finished: waiting for the VM to finish booting, in 0.00 seconds)
vm-test-run-update-hardware-configuration> target # Connection to localhost (::1) 22 port [tcp/ssh] succeeded!
vm-test-run-update-hardware-configuration> target: (finished: waiting for TCP port 22 on localhost, in 0.05 seconds)
vm-test-run-update-hardware-configuration> Setting up port forwarding from host port 37261 to guest port 22
vm-test-run-update-hardware-configuration> target # [   10.879748] sshd-session[627]: Connection closed by ::1 port 33864 [preauth]
vm-test-run-update-hardware-configuration> Host port 37261 is now listening
vm-test-run-update-hardware-configuration> target # [   12.877837] sshd-session[629]: Connection closed by 10.0.2.2 port 42114 [preauth]
vm-test-run-update-hardware-configuration> target # [   32.308548] sshd-session[637]: Accepted publickey for nonrootuser from 10.0.2.2 port 47128 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   32.316103] sshd-session[637]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   32.333684] systemd[1]: Created slice Slice /user/1000.
vm-test-run-update-hardware-configuration> target # [   32.336071] systemd[1]: Starting User Runtime Directory /run/user/1000...
vm-test-run-update-hardware-configuration> target # [   32.349198] systemd-logind[550]: New session '1' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   32.363521] systemd[1]: Finished User Runtime Directory /run/user/1000.
vm-test-run-update-hardware-configuration> target # [   32.367042] systemd[1]: Starting User Manager for UID 1000...
vm-test-run-update-hardware-configuration> target # [   32.384273] (systemd)[643]: pam_unix(systemd-user:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   32.388668] systemd-logind[550]: New session '2' of user 'nonrootuser' with class 'manager' and type 'unspecified'.
vm-test-run-update-hardware-configuration> target # [   32.402703] systemd[643]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   32.491150] systemd[643]: Queued start job for default target Main User Target.
vm-test-run-update-hardware-configuration> target # [   32.493753] systemd[643]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   32.497185] systemd[643]: Created slice User Application Slice.
vm-test-run-update-hardware-configuration> target # [   32.499342] systemd[643]: Started Daily Cleanup of User's Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   32.500680] systemd[643]: Reached target Paths.
vm-test-run-update-hardware-configuration> target # [   32.501743] systemd[643]: Reached target Timers.
vm-test-run-update-hardware-configuration> target # [   32.503716] systemd[643]: Starting D-Bus User Message Bus Socket...
vm-test-run-update-hardware-configuration> target # [   32.506634] systemd[643]: Starting Create User Files and Directories...
vm-test-run-update-hardware-configuration> target # [   32.529278] systemd[643]: Finished Create User Files and Directories.
vm-test-run-update-hardware-configuration> target # [   32.540588] systemd[643]: Listening on D-Bus User Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   32.541853] systemd[643]: Reached target Sockets.
vm-test-run-update-hardware-configuration> target # [   32.542771] systemd[643]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   32.543748] systemd[1]: Started User Manager for UID 1000.
vm-test-run-update-hardware-configuration> target # [   32.547385] systemd[643]: Starting Run user-specific NixOS activation...
vm-test-run-update-hardware-configuration> target # [   32.550740] systemd[1]: Started Session 1 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   32.580113] systemd[643]: Finished Run user-specific NixOS activation.
vm-test-run-update-hardware-configuration> target # [   32.582604] systemd[643]: Reached target Main User Target.
vm-test-run-update-hardware-configuration> target # [   32.584401] systemd[643]: Startup finished in 184ms.
vm-test-run-update-hardware-configuration> target # [   32.623957] sudo[664]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-facter
vm-test-run-update-hardware-configuration> target # [   32.631267] sudo[664]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   32.909928] sr 2:0:0:0: Attached scsi generic sg0 type 5
vm-test-run-update-hardware-configuration> target # [   32.828612] sudo[664]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   32.837035] sshd-session[655]: Received disconnect from 10.0.2.2 port 47128:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   32.838615] sshd-session[655]: Disconnected from user nonrootuser 10.0.2.2 port 47128
vm-test-run-update-hardware-configuration> target # [   32.840267] sshd-session[637]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   32.844643] systemd-logind[550]: Session 1 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> target # [   52.625751] sshd-session[694]: Accepted publickey for nonrootuser from 10.0.2.2 port 38120 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   52.633794] sshd-session[694]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   52.641252] systemd-logind[550]: New session '3' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   52.644954] systemd[1]: Started Session 3 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   52.709916] sudo[704]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-generate-config --no-filesystems --show-hardware-config
vm-test-run-update-hardware-configuration> target # [   52.719841] sudo[704]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   52.889284] sudo[704]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   52.902162] sshd-session[697]: Received disconnect from 10.0.2.2 port 38120:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   52.903844] sshd-session[697]: Disconnected from user nonrootuser 10.0.2.2 port 38120
vm-test-run-update-hardware-configuration> target # [   52.905586] sshd-session[694]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   52.910823] systemd-logind[550]: Session 3 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> (finished: run the VM test script, in 56.30 seconds)
vm-test-run-update-hardware-configuration> test script finished in 56.45s
vm-test-run-update-hardware-configuration> cleanup
vm-test-run-update-hardware-configuration> kill QemuMachine (pid 45)
vm-test-run-update-hardware-configuration> target # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/lb41b0anx1f98y9y5s9mdv97gjgsq740-python3-3.14.7/bin/python3.14)
vm-test-run-update-hardware-configuration> target # [2026-10-13T16:56:04Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-10-13T16:56:04Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-10-13T16:56:04Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> (finished: cleanup, in 0.13 seconds)