don't know how to build these paths:
  /nix/store/112bf0n32zq4w9f4nhbhicwmjlklxfwm-vm-test-run-update-hardware-configuration.drv
warning: ignoring the client-specified setting 'store', because it is a restricted setting and you are not a trusted user
building '/nix/store/z2wqc5in1xmb676wbx5v5m6fbjg37yp3-test-script.drv' on nix-store.geninf.io:50051
test-script> build-x86-01: building z2wqc5in1xmb676wbx5v5m6fbjg37yp3-test-script.drv
test-script> structuredAttrs is enabled
building '/nix/store/fj4i6w7216whc4j7wdxnxvypqq433kg3-driverConfiguration.json.drv' on nix-store.geninf.io:50051
driverConfiguration.json> build-x86-01: building fj4i6w7216whc4j7wdxnxvypqq433kg3-driverConfiguration.json.drv
driverConfiguration.json> structuredAttrs is enabled
building '/nix/store/vx1hkiwp17b243aidxvsyaccv37znxhp-nixos-test-driver-update-hardware-configuration.drv' on nix-store.geninf.io:50051
nixos-test-driver-update-hardware-configuration> build-x86-01: building vx1hkiwp17b243aidxvsyaccv37znxhp-nixos-test-driver-update-hardware-configuration.drv
nixos-test-driver-update-hardware-configuration> Running type check (enable/disable: config.skipTypeCheck)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck
nixos-test-driver-update-hardware-configuration> All checks passed!
nixos-test-driver-update-hardware-configuration> Linting test script (enable/disable: config.skipLint)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint
nixos-test-driver-update-hardware-configuration> All checks passed!
building '/nix/store/112bf0n32zq4w9f4nhbhicwmjlklxfwm-vm-test-run-update-hardware-configuration.drv' on nix-store.geninf.io:50051
vm-test-run-update-hardware-configuration> build-x86-01: building 112bf0n32zq4w9f4nhbhicwmjlklxfwm-vm-test-run-update-hardware-configuration.drv
vm-test-run-update-hardware-configuration> Machine state will be reset. To keep it, pass --keep-machine-state
vm-test-run-update-hardware-configuration> start all VLans
vm-test-run-update-hardware-configuration> (finished: start all VLans, in 0.00 seconds)
vm-test-run-update-hardware-configuration> Test will time out and terminate in 3600.0 seconds
vm-test-run-update-hardware-configuration> run the VM test script
vm-test-run-update-hardware-configuration> additionally exposed symbols:
vm-test-run-update-hardware-configuration>     target,
vm-test-run-update-hardware-configuration>     vlan1,
vm-test-run-update-hardware-configuration>     start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh
vm-test-run-update-hardware-configuration> target: starting vm
vm-test-run-update-hardware-configuration> target # Disk image does not exist, creating the virtualisation disk image...
vm-test-run-update-hardware-configuration> target # Formatting '/build/vm-state-target/tmp.oQwqEWFMBB', fmt=raw size=8589934592
vm-test-run-update-hardware-configuration> target # mke2fs 1.47.4 (6-Mar-2025)
vm-test-run-update-hardware-configuration> target # Discarding device blocks:       0/2097152               done
vm-test-run-update-hardware-configuration> target # Creating filesystem with 2097152 4k blocks and 524288 inodes
vm-test-run-update-hardware-configuration> target # Filesystem UUID: b9f84aad-c48a-4e01-8f1b-4ea0381e2290
vm-test-run-update-hardware-configuration> target # Superblock backups stored on blocks:
vm-test-run-update-hardware-configuration> target # 	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Allocating group tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Writing inode tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Creating journal (16384 blocks): done
vm-test-run-update-hardware-configuration> target # Writing superblocks and filesystem accounting information:  0/64     done
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Virtualisation disk image created.
vm-test-run-update-hardware-configuration> target # Formatting 'empty0.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=536870912 lazy_refcounts=off refcount_bits=16
vm-test-run-update-hardware-configuration> target # Starting virtiofs daemons...
vm-test-run-update-hardware-configuration> target # [2026-10-14T10:09:33Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-14T10:09:33Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-14T10:09:33Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-14T10:09:33Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-14T10:09:33Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-14T10:09:33Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-14T10:09:33Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-14T10:09:33Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-14T10:09:33Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target: QEMU running (pid 45)
vm-test-run-update-hardware-configuration> target # [2026-10-14T10:09:33Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-10-14T10:09:33Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-10-14T10:09:33Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC550+7EF2C550 CA00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:02.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:06.0 CB00 PCI2.10 PnP PMM 7EFCC550 7EF2C550 CB00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:06.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Booting from ROM...
vm-test-run-update-hardware-configuration> target # Probing EDD (edd=off to disable)... ok[    0.000000] Linux version 6.18.55 (nixbld@localhost) (gcc (GCC) 16.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Sat Oct  3 10:39:03 UTC 2026
vm-test-run-update-hardware-configuration> target # [    0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/77m1783ayn30p981nrzvh0aa30mqs5rc-nixos-system-target-test/init regInfo=/nix/.ro-store/qj8myhcl401ndrn40rwq18ldgzjfzn8p-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-provided physical RAM map:
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd4fff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000007ffd5000-0x000000007fffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013e7fffff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] NX (Execute Disable) protection: active
vm-test-run-update-hardware-configuration> target # [    0.000000] APIC: Static calls initialized
vm-test-run-update-hardware-configuration> target # [    0.000000] SMBIOS 2.8 present.
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: Memory slots populated: 1/1
vm-test-run-update-hardware-configuration> target # [    0.000000] Hypervisor detected: KVM
vm-test-run-update-hardware-configuration> target # [    0.000000] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
vm-test-run-update-hardware-configuration> target # [    0.000001] kvm-clock: using sched offset of 401456667 cycles
vm-test-run-update-hardware-configuration> target # [    0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
vm-test-run-update-hardware-configuration> target # [    0.000006] tsc: Detected 4192.112 MHz processor
vm-test-run-update-hardware-configuration> target # [    0.000557] last_pfn = 0x13e800 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000585] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
vm-test-run-update-hardware-configuration> target # [    0.000588] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
vm-test-run-update-hardware-configuration> target # [    0.000628] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.002199] found SMP MP-table at [mem 0x000f5450-0x000f545f]
vm-test-run-update-hardware-configuration> target # [    0.002213] Using GB pages for direct mapping
vm-test-run-update-hardware-configuration> target # [    0.002333] RAMDISK: [mem 0x7e2e3000-0x7ffcffff]
vm-test-run-update-hardware-configuration> target # [    0.002338] ACPI: Early table checksum verification disabled
vm-test-run-update-hardware-configuration> target # [    0.002342] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS )
vm-test-run-update-hardware-configuration> target # [    0.002345] ACPI: RSDT 0x000000007FFE2433 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002349] ACPI: FACP 0x000000007FFE222B 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002355] ACPI: DSDT 0x000000007FFE0040 0021EB (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002357] ACPI: FACS 0x000000007FFE0000 000040
vm-test-run-update-hardware-configuration> target # [    0.002358] ACPI: APIC 0x000000007FFE231F 000078 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002359] ACPI: HPET 0x000000007FFE2397 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002360] ACPI: MCFG 0x000000007FFE23CF 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002361] ACPI: WAET 0x000000007FFE240B 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002362] ACPI: Reserving FACP table memory at [mem 0x7ffe222b-0x7ffe231e]
vm-test-run-update-hardware-configuration> target # [    0.002363] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe222a]
vm-test-run-update-hardware-configuration> target # [    0.002363] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
vm-test-run-update-hardware-configuration> target # [    0.002364] ACPI: Reserving APIC table memory at [mem 0x7ffe231f-0x7ffe2396]
vm-test-run-update-hardware-configuration> target # [    0.002364] ACPI: Reserving HPET table memory at [mem 0x7ffe2397-0x7ffe23ce]
vm-test-run-update-hardware-configuration> target # [    0.002365] ACPI: Reserving MCFG table memory at [mem 0x7ffe23cf-0x7ffe240a]
vm-test-run-update-hardware-configuration> target # [    0.002365] ACPI: Reserving WAET table memory at [mem 0x7ffe240b-0x7ffe2432]
vm-test-run-update-hardware-configuration> target # [    0.002717] No NUMA configuration found
vm-test-run-update-hardware-configuration> target # [    0.002718] Faking a node at [mem 0x0000000000000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002721] NODE_DATA(0) allocated [mem 0x13e7f8780-0x13e7fdcff]
vm-test-run-update-hardware-configuration> target # [    0.002799] Zone ranges:
vm-test-run-update-hardware-configuration> target # [    0.002799]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
vm-test-run-update-hardware-configuration> target # [    0.002801]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
vm-test-run-update-hardware-configuration> target # [    0.002802]   Normal   [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002802]   Device   empty
vm-test-run-update-hardware-configuration> target # [    0.002803] Movable zone start for each node
vm-test-run-update-hardware-configuration> target # [    0.002804] Early memory node ranges
vm-test-run-update-hardware-configuration> target # [    0.002804]   node   0: [mem 0x0000000000001000-0x000000000009efff]
vm-test-run-update-hardware-configuration> target # [    0.002805]   node   0: [mem 0x0000000000100000-0x000000007ffd4fff]
vm-test-run-update-hardware-configuration> target # [    0.002805]   node   0: [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002807] Initmem setup node 0 [mem 0x0000000000001000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002825] On node 0, zone DMA: 1 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.003031] On node 0, zone DMA: 97 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.045261] On node 0, zone Normal: 43 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.045617] On node 0, zone Normal: 6144 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.046514] ACPI: PM-Timer IO Port: 0x608
vm-test-run-update-hardware-configuration> target # [    0.046530] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
vm-test-run-update-hardware-configuration> target # [    0.046556] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
vm-test-run-update-hardware-configuration> target # [    0.046559] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
vm-test-run-update-hardware-configuration> target # [    0.046561] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
vm-test-run-update-hardware-configuration> target # [    0.046562] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
vm-test-run-update-hardware-configuration> target # [    0.046563] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
vm-test-run-update-hardware-configuration> target # [    0.046563] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
vm-test-run-update-hardware-configuration> target # [    0.046565] ACPI: Using ACPI (MADT) for SMP configuration information
vm-test-run-update-hardware-configuration> target # [    0.046566] ACPI: HPET id: 0x8086a201 base: 0xfed00000
vm-test-run-update-hardware-configuration> target # [    0.046572] TSC deadline timer available
vm-test-run-update-hardware-configuration> target # [    0.046577] CPU topo: Max. logical packages:   1
vm-test-run-update-hardware-configuration> target # [    0.046577] CPU topo: Max. logical dies:       1
vm-test-run-update-hardware-configuration> target # [    0.046578] CPU topo: Max. dies per package:   1
vm-test-run-update-hardware-configuration> target # [    0.046581] CPU topo: Max. threads per core:   1
vm-test-run-update-hardware-configuration> target # [    0.046581] CPU topo: Num. cores per package:     1
vm-test-run-update-hardware-configuration> target # [    0.046581] CPU topo: Num. threads per package:   1
vm-test-run-update-hardware-configuration> target # [    0.046582] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs
vm-test-run-update-hardware-configuration> target # [    0.046605] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
vm-test-run-update-hardware-configuration> target # [    0.046633] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
vm-test-run-update-hardware-configuration> target # [    0.046634] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
vm-test-run-update-hardware-configuration> target # [    0.046635] PM: hibernation: Registered nosave memory: [mem 0x7ffd5000-0xffffffff]
vm-test-run-update-hardware-configuration> target # [    0.046636] [mem 0xc0000000-0xfed1bfff] available for PCI devices
vm-test-run-update-hardware-configuration> target # [    0.046637] Booting paravirtualized kernel on KVM
vm-test-run-update-hardware-configuration> target # [    0.046643] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
vm-test-run-update-hardware-configuration> target # [    0.050402] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
vm-test-run-update-hardware-configuration> target # [    0.052417] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152
vm-test-run-update-hardware-configuration> target # [    0.052461] kvm-guest: PV spinlocks disabled, single CPU
vm-test-run-update-hardware-configuration> target # [    0.052463] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/77m1783ayn30p981nrzvh0aa30mqs5rc-nixos-system-target-test/init regInfo=/nix/.ro-store/qj8myhcl401ndrn40rwq18ldgzjfzn8p-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.052549] Unknown kernel command line parameters "regInfo=/nix/.ro-store/qj8myhcl401ndrn40rwq18ldgzjfzn8p-closure-info/registration", will be passed to user space.
vm-test-run-update-hardware-configuration> target # [    0.052746] random: crng init done
vm-test-run-update-hardware-configuration> target # [    0.052747] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
vm-test-run-update-hardware-configuration> target # [    0.056191] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.057971] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.058015] software IO TLB: area num 1.
vm-test-run-update-hardware-configuration> target # [    0.119465] Fallback order for Node 0: 0
vm-test-run-update-hardware-configuration> target # [    0.119471] Built 1 zonelists, mobility grouping on.  Total pages: 780147
vm-test-run-update-hardware-configuration> target # [    0.119474] Policy zone: Normal
vm-test-run-update-hardware-configuration> target # [    0.121402] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
vm-test-run-update-hardware-configuration> target # [    0.127143] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
vm-test-run-update-hardware-configuration> target # [    0.132911] allocated 6291456 bytes of page_ext
vm-test-run-update-hardware-configuration> target # [    0.142359] ftrace: allocating 48837 entries in 192 pages
vm-test-run-update-hardware-configuration> target # [    0.142361] ftrace: allocated 192 pages with 2 groups
vm-test-run-update-hardware-configuration> target # [    0.143091] Dynamic Preempt: lazy
vm-test-run-update-hardware-configuration> target # [    0.143196] rcu: Preemptible hierarchical RCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.143197] rcu: 	RCU event tracing is enabled.
vm-test-run-update-hardware-configuration> target # [    0.143197] rcu: 	RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.143199] 	Trampoline variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.143199] 	Rude variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.143199] 	Tracing variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.143200] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
vm-test-run-update-hardware-configuration> target # [    0.143200] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
vm-test-run-update-hardware-configuration> target # [    0.143212] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.143214] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.143214] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.146450] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16
vm-test-run-update-hardware-configuration> target # [    0.146700] rcu: srcu_init: Setting srcu_struct sizes based on contention.
vm-test-run-update-hardware-configuration> target # [    0.146706] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
vm-test-run-update-hardware-configuration> target # [    0.146868] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
vm-test-run-update-hardware-configuration> target # [    0.152099] Console: colour VGA+ 80x25
vm-test-run-update-hardware-configuration> target # [    0.152103] printk: legacy console [tty0] enabled
vm-test-run-update-hardware-configuration> target # [    0.184303] printk: legacy console [ttyS0] enabled
vm-test-run-update-hardware-configuration> target # [    0.327205] ACPI: Core revision 20250807
vm-test-run-update-hardware-configuration> target # [    0.328344] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
vm-test-run-update-hardware-configuration> target # [    0.330299] APIC: Switch to symmetric I/O mode setup
vm-test-run-update-hardware-configuration> target # [    0.331507] x2apic enabled
vm-test-run-update-hardware-configuration> target # [    0.332343] APIC: Switched APIC routing to: physical x2apic
vm-test-run-update-hardware-configuration> target # [    0.334368] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
vm-test-run-update-hardware-configuration> target # [    0.335621] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d4505823, max_idle_ns: 440795228884 ns
vm-test-run-update-hardware-configuration> target # [    0.337729] Calibrating delay loop (skipped) preset value.. 8384.22 BogoMIPS (lpj=4192112)
vm-test-run-update-hardware-configuration> target # [    0.338824] x86/cpu: User Mode Instruction Prevention (UMIP) activated
vm-test-run-update-hardware-configuration> target # [    0.339842] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
vm-test-run-update-hardware-configuration> target # [    0.340725] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
vm-test-run-update-hardware-configuration> target # [    0.342735] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
vm-test-run-update-hardware-configuration> target # [    0.344725] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
vm-test-run-update-hardware-configuration> target # [    0.345725] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
vm-test-run-update-hardware-configuration> target # [    0.346725] Speculative Return Stack Overflow: Mitigation: Safe RET
vm-test-run-update-hardware-configuration> target # [    0.348725] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
vm-test-run-update-hardware-configuration> target # [    0.349734] Spectre V2 : Enabling IBPB for BPF
vm-test-run-update-hardware-configuration> target # [    0.351455] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
vm-test-run-update-hardware-configuration> target # [    0.352727] active return thunk: srso_alias_return_thunk
vm-test-run-update-hardware-configuration> target # [    0.353751] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
vm-test-run-update-hardware-configuration> target # [    0.354725] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
vm-test-run-update-hardware-configuration> target # [    0.355725] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
vm-test-run-update-hardware-configuration> target # [    0.356725] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
vm-test-run-update-hardware-configuration> target # [    0.357725] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
vm-test-run-update-hardware-configuration> target # [    0.358725] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
vm-test-run-update-hardware-configuration> target # [    0.359725] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
vm-test-run-update-hardware-configuration> target # [    0.360725] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
vm-test-run-update-hardware-configuration> target # [    0.361725] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
vm-test-run-update-hardware-configuration> target # [    0.362726] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
vm-test-run-update-hardware-configuration> target # [    0.363725] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
vm-test-run-update-hardware-configuration> target # [    0.364725] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
vm-test-run-update-hardware-configuration> target # [    0.366725] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
vm-test-run-update-hardware-configuration> target # [    0.367725] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
vm-test-run-update-hardware-configuration> target # [    0.368725] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16
vm-test-run-update-hardware-configuration> target # [    0.369725] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]:   24
vm-test-run-update-hardware-configuration> target # [    0.371725] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.
vm-test-run-update-hardware-configuration> target # [    0.399685] Freeing SMP alternatives memory: 48K
vm-test-run-update-hardware-configuration> target # [    0.400484] pid_max: default: 32768 minimum: 301
vm-test-run-update-hardware-configuration> target # [    0.401540] LSM: initializing lsm=capability,landlock,yama,bpf,ima
vm-test-run-update-hardware-configuration> target # [    0.402819] landlock: Up and running.
vm-test-run-update-hardware-configuration> target # [    0.403725] Yama: becoming mindful.
vm-test-run-update-hardware-configuration> target # [    0.404827] LSM support for eBPF active
vm-test-run-update-hardware-configuration> target # [    0.405772] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.406781] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.408559] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2)
vm-test-run-update-hardware-configuration> target # [    0.409130] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
vm-test-run-update-hardware-configuration> target # [    0.409729] ... version:                   2
vm-test-run-update-hardware-configuration> target # [    0.410619] ... bit width:                 48
vm-test-run-update-hardware-configuration> target # [    0.411435] ... generic counters:          6
vm-test-run-update-hardware-configuration> target # [    0.411771] ... generic bitmap:            000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.412726] ... fixed-purpose counters:    0
vm-test-run-update-hardware-configuration> target # [    0.413619] ... fixed-purpose bitmap:      0000000000000000
vm-test-run-update-hardware-configuration> target # [    0.414624] ... value mask:                0000ffffffffffff
vm-test-run-update-hardware-configuration> target # [    0.415625] ... max period:                00007fffffffffff
vm-test-run-update-hardware-configuration> target # [    0.416634] ... global_ctrl mask:          000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.417746] signal: max sigframe size: 3376
vm-test-run-update-hardware-configuration> target # [    0.418750] rcu: Hierarchical SRCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.419731] rcu: 	Max phase no-delay instances is 400.
vm-test-run-update-hardware-configuration> target # [    0.423948] smp: Bringing up secondary CPUs ...
vm-test-run-update-hardware-configuration> target # [    0.424742] smp: Brought up 1 node, 1 CPU
vm-test-run-update-hardware-configuration> target # [    0.425608] smpboot: Total of 1 processors activated (8384.22 BogoMIPS)
vm-test-run-update-hardware-configuration> target # [    0.426904] Memory: 2906404K/3120588K available (18124K kernel code, 2728K rwdata, 13644K rodata, 3656K init, 3632K bss, 201812K reserved, 0K cma-reserved)
vm-test-run-update-hardware-configuration> target # [    0.427961] devtmpfs: initialized
vm-test-run-update-hardware-configuration> target # [    0.428916] x86/mm: Memory block size: 128MB
vm-test-run-update-hardware-configuration> target # [    0.430665] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.431751] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).
vm-test-run-update-hardware-configuration> target # [    0.432797] pinctrl core: initialized pinctrl subsystem
vm-test-run-update-hardware-configuration> target # [    0.434012] PM: RTC time: 10:09:33, date: 2026-10-14
vm-test-run-update-hardware-configuration> target # [    0.436833] NET: Registered PF_NETLINK/PF_ROUTE protocol family
vm-test-run-update-hardware-configuration> target # [    0.438321] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.438769] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.440258] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.440740] audit: initializing netlink subsys (disabled)
vm-test-run-update-hardware-configuration> target # [    0.441955] thermal_sys: Registered thermal governor 'fair_share'
vm-test-run-update-hardware-configuration> target # [    0.441957] thermal_sys: Registered thermal governor 'bang_bang'
vm-test-run-update-hardware-configuration> target # [    0.442730] audit: type=2000 audit(1791972574.631:1): state=initialized audit_enabled=0 res=1
vm-test-run-update-hardware-configuration> target # [    0.444728] thermal_sys: Registered thermal governor 'step_wise'
vm-test-run-update-hardware-configuration> target # [    0.444730] thermal_sys: Registered thermal governor 'user_space'
vm-test-run-update-hardware-configuration> target # [    0.445726] thermal_sys: Registered thermal governor 'power_allocator'
vm-test-run-update-hardware-configuration> target # [    0.446751] cpuidle: using governor menu
vm-test-run-update-hardware-configuration> target # [    0.449420] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vm-test-run-update-hardware-configuration> target # [    0.449977] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.450729] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
vm-test-run-update-hardware-configuration> target # [    0.451741] PCI: Using configuration type 1 for base access
vm-test-run-update-hardware-configuration> target # [    0.452901] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
vm-test-run-update-hardware-configuration> target # [    0.459738] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.460726] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
vm-test-run-update-hardware-configuration> target # [    0.465726] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.466727] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
vm-test-run-update-hardware-configuration> target # [    0.473816] ACPI: Added _OSI(Module Device)
vm-test-run-update-hardware-configuration> target # [    0.474720] ACPI: Added _OSI(Processor Device)
vm-test-run-update-hardware-configuration> target # [    0.475462] ACPI: Added _OSI(Processor Aggregator Device)
vm-test-run-update-hardware-configuration> target # [    0.481641] ACPI: 1 ACPI AML tables successfully acquired and loaded
vm-test-run-update-hardware-configuration> target # [    0.485659] ACPI: Interpreter enabled
vm-test-run-update-hardware-configuration> target # [    0.486341] ACPI: PM: (supports S0 S3 S4 S5)
vm-test-run-update-hardware-configuration> target # [    0.486727] ACPI: Using IOAPIC for interrupt routing
vm-test-run-update-hardware-configuration> target # [    0.488828] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
vm-test-run-update-hardware-configuration> target # [    0.489727] PCI: Using E820 reservations for host bridge windows
vm-test-run-update-hardware-configuration> target # [    0.490866] ACPI: Enabled 2 GPEs in block 00 to 3F
vm-test-run-update-hardware-configuration> target # [    0.495014] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
vm-test-run-update-hardware-configuration> target # [    0.495738] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
vm-test-run-update-hardware-configuration> target # [    0.496797] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]
vm-test-run-update-hardware-configuration> target # [    0.497821] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
vm-test-run-update-hardware-configuration> target # [    0.499161] PCI host bridge to bus 0000:00
vm-test-run-update-hardware-configuration> target # [    0.499731] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.500727] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.501727] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.502727] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.503727] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.504727] pci_bus 0000:00: root bus resource [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.505728] pci_bus 0000:00: root bus resource [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.506900] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.508494] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.511787] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
vm-test-run-update-hardware-configuration> target # [    0.512747] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
vm-test-run-update-hardware-configuration> target # [    0.513767] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
vm-test-run-update-hardware-configuration> target # [    0.514995] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
vm-test-run-update-hardware-configuration> target # [    0.516996] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.519748] pci 0000:00:02.0: BAR 0 [io  0xc180-0xc19f]
vm-test-run-update-hardware-configuration> target # [    0.520738] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
vm-test-run-update-hardware-configuration> target # [    0.521770] pci 0000:00:02.0: BAR 4 [mem 0xe0000000000-0xe0000003fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.522738] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]
vm-test-run-update-hardware-configuration> target # [    0.524934] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.526749] pci 0000:00:03.0: BAR 0 [io  0xc1a0-0xc1bf]
vm-test-run-update-hardware-configuration> target # [    0.527737] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
vm-test-run-update-hardware-configuration> target # [    0.528770] pci 0000:00:03.0: BAR 4 [mem 0xe0000004000-0xe0000007fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.530650] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.533364] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
vm-test-run-update-hardware-configuration> target # [    0.533739] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
vm-test-run-update-hardware-configuration> target # [    0.534778] pci 0000:00:04.0: BAR 4 [mem 0xe0000008000-0xe000000bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.536698] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.539741] pci 0000:00:05.0: BAR 0 [io  0xc080-0xc0ff]
vm-test-run-update-hardware-configuration> target # [    0.540738] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]
vm-test-run-update-hardware-configuration> target # [    0.541766] pci 0000:00:05.0: BAR 4 [mem 0xe000000c000-0xe000000ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.543700] pci 0000:00:06.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.546652] pci 0000:00:06.0: BAR 0 [io  0xc1c0-0xc1df]
vm-test-run-update-hardware-configuration> target # [    0.547738] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]
vm-test-run-update-hardware-configuration> target # [    0.548768] pci 0000:00:06.0: BAR 4 [mem 0xe0000010000-0xe0000013fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.549738] pci 0000:00:06.0: ROM [mem 0xfeb80000-0xfebbffff pref]
vm-test-run-update-hardware-configuration> target # [    0.551708] pci 0000:00:07.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.553748] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]
vm-test-run-update-hardware-configuration> target # [    0.554765] pci 0000:00:07.0: BAR 4 [mem 0xe0000014000-0xe0000017fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.556709] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.558746] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]
vm-test-run-update-hardware-configuration> target # [    0.559765] pci 0000:00:08.0: BAR 4 [mem 0xe0000018000-0xe000001bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.561636] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.563741] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]
vm-test-run-update-hardware-configuration> target # [    0.564766] pci 0000:00:09.0: BAR 4 [mem 0xe000001c000-0xe000001ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.567653] pci 0000:00:0a.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.569642] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]
vm-test-run-update-hardware-configuration> target # [    0.570755] pci 0000:00:0a.0: BAR 4 [mem 0xe0000020000-0xe0000023fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.572607] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.574747] pci 0000:00:0b.0: BAR 0 [io  0xc100-0xc13f]
vm-test-run-update-hardware-configuration> target # [    0.575738] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]
vm-test-run-update-hardware-configuration> target # [    0.576766] pci 0000:00:0b.0: BAR 4 [mem 0xe0000024000-0xe0000027fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.578720] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.581727] pci 0000:00:0c.0: BAR 0 [io  0xc1e0-0xc1ff]
vm-test-run-update-hardware-configuration> target # [    0.582737] pci 0000:00:0c.0: BAR 1 [mem 0xfebdb000-0xfebdbfff]
vm-test-run-update-hardware-configuration> target # [    0.583764] pci 0000:00:0c.0: BAR 4 [mem 0xe0000028000-0xe000002bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.585677] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.587611] pci 0000:00:1d.0: BAR 4 [io  0xc200-0xc21f]
vm-test-run-update-hardware-configuration> target # [    0.588842] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.590538] pci 0000:00:1d.1: BAR 4 [io  0xc220-0xc23f]
vm-test-run-update-hardware-configuration> target # [    0.591837] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.593545] pci 0000:00:1d.2: BAR 4 [io  0xc240-0xc25f]
vm-test-run-update-hardware-configuration> target # [    0.594895] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.596537] pci 0000:00:1d.7: BAR 0 [mem 0xfebdc000-0xfebdcfff]
vm-test-run-update-hardware-configuration> target # [    0.598219] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.599214] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
vm-test-run-update-hardware-configuration> target # [    0.600066] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.601774] pci 0000:00:1f.2: BAR 4 [io  0xc260-0xc27f]
vm-test-run-update-hardware-configuration> target # [    0.602737] pci 0000:00:1f.2: BAR 5 [mem 0xfebdd000-0xfebddfff]
vm-test-run-update-hardware-configuration> target # [    0.604194] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.605503] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
vm-test-run-update-hardware-configuration> target # [    0.611520] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.612827] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.613879] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.614839] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.615857] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.616857] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.617851] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.618839] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.619775] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.620752] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.621783] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.622745] ACPI: PCI: Interrupt link GSID configured for IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.623743] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
vm-test-run-update-hardware-configuration> target # [    0.624740] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
vm-test-run-update-hardware-configuration> target # [    0.625744] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
vm-test-run-update-hardware-configuration> target # [    0.626740] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
vm-test-run-update-hardware-configuration> target # [    0.628624] iommu: Default domain type: Translated
vm-test-run-update-hardware-configuration> target # [    0.629506] iommu: DMA domain TLB invalidation policy: lazy mode
vm-test-run-update-hardware-configuration> target # [    0.630912] ACPI: bus type USB registered
vm-test-run-update-hardware-configuration> target # [    0.631780] usbcore: registered new interface driver usbfs
vm-test-run-update-hardware-configuration> target # [    0.632745] usbcore: registered new interface driver hub
vm-test-run-update-hardware-configuration> target # [    0.633739] usbcore: registered new device driver usb
vm-test-run-update-hardware-configuration> target # [    0.635421] NetLabel: Initializing
vm-test-run-update-hardware-configuration> target # [    0.635731] NetLabel:  domain hash size = 128
vm-test-run-update-hardware-configuration> target # [    0.636627] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
vm-test-run-update-hardware-configuration> target # [    0.637652] NetLabel:  unlabeled traffic allowed by default
vm-test-run-update-hardware-configuration> target # [    0.638632] PCI: Using ACPI for IRQ routing
vm-test-run-update-hardware-configuration> target # [    0.714548] pci 0000:00:01.0: vgaarb: setting as boot VGA device
vm-test-run-update-hardware-configuration> target # [    0.714723] pci 0000:00:01.0: vgaarb: bridge control possible
vm-test-run-update-hardware-configuration> target # [    0.714723] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vm-test-run-update-hardware-configuration> target # [    0.714733] vgaarb: loaded
vm-test-run-update-hardware-configuration> target # [    0.715551] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
vm-test-run-update-hardware-configuration> target # [    0.716514] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
vm-test-run-update-hardware-configuration> target # [    0.721812] clocksource: Switched to clocksource kvm-clock
vm-test-run-update-hardware-configuration> target # [    0.724902] VFS: Disk quotas dquot_6.6.0
vm-test-run-update-hardware-configuration> target # [    0.725784] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
vm-test-run-update-hardware-configuration> target # [    0.727394] pnp: PnP ACPI init
vm-test-run-update-hardware-configuration> target # [    0.728291] ACPI: IRQ 4 override to edge(!), high(!)
vm-test-run-update-hardware-configuration> target # [    0.729455] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
vm-test-run-update-hardware-configuration> target # [    0.731275] pnp: PnP ACPI: found 5 devices
vm-test-run-update-hardware-configuration> target # [    0.738464] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
vm-test-run-update-hardware-configuration> target # [    0.740198] clocksource: Switched to clocksource acpi_pm
vm-test-run-update-hardware-configuration> target # [    0.741358] NET: Registered PF_INET protocol family
vm-test-run-update-hardware-configuration> target # [    0.742822] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.756284] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.758169] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.759776] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.762362] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.763996] TCP: Hash tables configured (established 32768 bind 32768)
vm-test-run-update-hardware-configuration> target # [    0.765441] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.767009] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.768417] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.770061] NET: Registered PF_UNIX/PF_LOCAL protocol family
vm-test-run-update-hardware-configuration> target # [    0.771274] NET: Registered PF_XDP protocol family
vm-test-run-update-hardware-configuration> target # [    0.772351] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.773637] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.774961] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.776413] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.777838] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.779272] pci_bus 0000:00: resource 9 [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.781464] ACPI: \_SB_.GSIA: Enabled at IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.783669] ACPI: \_SB_.GSIB: Enabled at IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.785752] ACPI: \_SB_.GSIC: Enabled at IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.788270] ACPI: \_SB_.GSID: Enabled at IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.790386] PCI: CLS 0 bytes, default 64
vm-test-run-update-hardware-configuration> target # [    0.791389] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
vm-test-run-update-hardware-configuration> target # [    0.792857] Trying to unpack rootfs image as initramfs...
vm-test-run-update-hardware-configuration> target # [    0.799058] software IO TLB: mapped [mem 0x000000007a2e3000-0x000000007e2e3000] (64MB)
vm-test-run-update-hardware-configuration> target # [    0.800817] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d4505823, max_idle_ns: 440795228884 ns
vm-test-run-update-hardware-configuration> target # [    0.849417] Initialise system trusted keyrings
vm-test-run-update-hardware-configuration> target # [    0.852098] workingset: timestamp_bits=40 max_order=20 bucket_order=0
vm-test-run-update-hardware-configuration> target # [    0.868630] Key type asymmetric registered
vm-test-run-update-hardware-configuration> target # [    0.872080] Asymmetric key parser 'x509' registered
vm-test-run-update-hardware-configuration> target # [    0.873182] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
vm-test-run-update-hardware-configuration> target # [    0.879418] io scheduler mq-deadline registered
vm-test-run-update-hardware-configuration> target # [    0.880409] io scheduler kyber registered
vm-test-run-update-hardware-configuration> target # [    0.883532] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
vm-test-run-update-hardware-configuration> target # [    0.887056] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
vm-test-run-update-hardware-configuration> target # [    0.892516] Linux agpgart interface v0.103
vm-test-run-update-hardware-configuration> target # [    0.893498] ACPI: bus type drm_connector registered
vm-test-run-update-hardware-configuration> target # [    0.896465] usbcore: registered new interface driver usbserial_generic
vm-test-run-update-hardware-configuration> target # [    0.897819] usbserial: USB Serial support registered for generic
vm-test-run-update-hardware-configuration> target # [    0.901058] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.
vm-test-run-update-hardware-configuration> target # [    0.901058] Please enable it if your BIOS has the CPPC option.
vm-test-run-update-hardware-configuration> target # [    0.903750] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
vm-test-run-update-hardware-configuration> target # [    0.908198] drop_monitor: Initializing network drop monitor service
vm-test-run-update-hardware-configuration> target # [    0.909580] NET: Registered PF_INET6 protocol family
vm-test-run-update-hardware-configuration> target # [    0.913546] Segment Routing with IPv6
vm-test-run-update-hardware-configuration> target # [    0.916089] In-situ OAM (IOAM) with IPv6
vm-test-run-update-hardware-configuration> target # [    0.918295] IPI shorthand broadcast: enabled
vm-test-run-update-hardware-configuration> target # [    0.926123] sched_clock: Marking stable (740021112, 186017664)->(1017622956, -91584180)
vm-test-run-update-hardware-configuration> target # [    0.931144] registered taskstats version 1
vm-test-run-update-hardware-configuration> target # [    0.932215] Loading compiled-in X.509 certificates
vm-test-run-update-hardware-configuration> target # [    0.947776] Demotion targets for Node 0: null
vm-test-run-update-hardware-configuration> target # [    0.951251] Key type .fscrypt registered
vm-test-run-update-hardware-configuration> target # [    0.952141] Key type fscrypt-provisioning registered
vm-test-run-update-hardware-configuration> target # [    0.955169] ima: No TPM chip found, activating TPM-bypass!
vm-test-run-update-hardware-configuration> target # [    0.956335] ima: Allocated hash algorithm: sha1
vm-test-run-update-hardware-configuration> target # [    0.959077] ima: No architecture policies found
vm-test-run-update-hardware-configuration> target # [    0.960286] PM:   Magic number: 14:751:173
vm-test-run-update-hardware-configuration> target # [    0.964408] RAS: Correctable Errors collector initialized.
vm-test-run-update-hardware-configuration> target # [    0.973851] clk: Disabling unused clocks
vm-test-run-update-hardware-configuration> target # [    0.979060] PM: genpd: Disabling unused power domains
vm-test-run-update-hardware-configuration> target # [    1.123092] Freeing initrd memory: 29620K
vm-test-run-update-hardware-configuration> target # [    1.126235] Freeing unused decrypted memory: 2028K
vm-test-run-update-hardware-configuration> target # [    1.128991] Freeing unused kernel image (initmem) memory: 3656K
vm-test-run-update-hardware-configuration> target # [    1.130352] Write protecting the kernel read-only data: 32768k
vm-test-run-update-hardware-configuration> target # [    1.131802] Freeing unused kernel image (text/rodata gap) memory: 304K
vm-test-run-update-hardware-configuration> target # [    1.133477] Freeing unused kernel image (rodata/data gap) memory: 692K
vm-test-run-update-hardware-configuration> target # [    1.166150] x86/mm: Checked W+X mappings: passed, no W+X pages found.
vm-test-run-update-hardware-configuration> target # [    1.167499] Run /init as init process
vm-test-run-update-hardware-configuration> target # [    1.177462] systemd[1]: Inserted module 'autofs4'
vm-test-run-update-hardware-configuration> target # [    1.192709] fuse: init (API version 7.45)
vm-test-run-update-hardware-configuration> target # [    1.198763] ACPI: \_SB_.GSIG: Enabled at IRQ 22
vm-test-run-update-hardware-configuration> target # [    1.201413] ACPI: \_SB_.GSIH: Enabled at IRQ 23
vm-test-run-update-hardware-configuration> target # [    1.204725] ACPI: \_SB_.GSIE: Enabled at IRQ 20
vm-test-run-update-hardware-configuration> target # [    1.207378] ACPI: \_SB_.GSIF: Enabled at IRQ 21
vm-test-run-update-hardware-configuration> target # [    1.214326] virtiofs virtio6: discovered new tag: nix-store
vm-test-run-update-hardware-configuration> target # [    1.216474] virtiofs virtio6: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.223448] virtiofs virtio7: discovered new tag: shared
vm-test-run-update-hardware-configuration> target # [    1.225462] virtiofs virtio7: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.237388] virtiofs virtio8: discovered new tag: xchg
vm-test-run-update-hardware-configuration> target # [    1.239410] virtiofs virtio8: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.258647] systemd[1]: Successfully made /usr/ read-only.
vm-test-run-update-hardware-configuration> target # [    1.594892] systemd[1]: systemd 261.3 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    1.600823] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    1.601873] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    1.602926] systemd[1]: Running in initrd.
vm-test-run-update-hardware-configuration> target # [    1.604166] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    1.605553] systemd[1]: Hostname set to <target>.
vm-test-run-update-hardware-configuration> target # [    1.661408] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    1.693256] systemd[1]: Queued start job for default target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    1.697211] systemd[1]: Created slice Slice /system/modprobe.
vm-test-run-update-hardware-configuration> target # [    1.698768] systemd[1]: Created slice Slice /system/systemd-makefs.
vm-test-run-update-hardware-configuration> target # [    1.700148] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    1.701802] systemd[1]: Expecting device /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    1.702914] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    1.703987] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    1.705098] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    1.706098] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    1.707291] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    1.708754] systemd[1]: Listening on Journal Socket (/dev/log).
vm-test-run-update-hardware-configuration> target # [    1.710155] systemd[1]: Listening on Journal Sockets.
vm-test-run-update-hardware-configuration> target # [    1.711360] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    1.712594] systemd[1]: Listening on udev Kernel Socket.
vm-test-run-update-hardware-configuration> target # [    1.713744] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    1.715787] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    1.719835] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    1.730533] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    1.737856] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    1.740820] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    1.746703] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    1.763751] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    1.770692] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    1.772819] systemd-journald[65]: Collecting audit messages is disabled.
vm-test-run-update-hardware-configuration> target # [    1.778588] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    1.786624] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config
vm-test-run-update-hardware-configuration> target # [    1.792599] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
vm-test-run-update-hardware-configuration> target # [    1.800105] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    1.803117] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
vm-test-run-update-hardware-configuration> target # [    1.832763] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    1.841225] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    1.856146] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    1.867280] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    1.882392] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    1.899714] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    1.904337] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    1.909129] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    1.916266] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    1.936209] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    1.752236] systemd-modules-load[66]: Inserted module 'dm_mod'
vm-test-run-update-hardware-configuration> target # [    1.754532] systemd-modules-load[66]: Inserted module 'virtio_balloon'
vm-test-run-update-hardware-configuration> target # [    1.758452] systemd-modules-load[66]: Inserted module 'virtio_gpu'
vm-test-run-update-hardware-configuration> target # [    1.768090] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    1.797399] systemd-udevd[73]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    1.806210] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    1.827151] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    1.836728] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    1.837932] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    1.839219] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    2.259282] virtio_blk virtio2: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.261598] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
vm-test-run-update-hardware-configuration> target # [    2.264656] ehci-pci 0000:00:1d.7: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.265581] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
vm-test-run-update-hardware-configuration> target # [    2.267772] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdc000
vm-test-run-update-hardware-configuration> target # [    2.275645] serio: i8042 KBD port at 0x60,0x64 irq 1
vm-test-run-update-hardware-configuration> target # [    2.276457] serio: i8042 AUX port at 0x60,0x64 irq 12
vm-test-run-update-hardware-configuration> target # [    2.277545] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
vm-test-run-update-hardware-configuration> target # [    2.278616] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.280433] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.281721] usb usb1: Product: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.283384] usb usb1: Manufacturer: Linux 6.18.55 ehci_hcd
vm-test-run-update-hardware-configuration> target # [    2.285223] virtio_blk virtio2: [vda] 16777216 512-byte logical blocks (8.59 GB/8.00 GiB)
vm-test-run-update-hardware-configuration> target # [    2.286853] usb usb1: SerialNumber: 0000:00:1d.7
vm-test-run-update-hardware-configuration> target # [    2.288344] hub 1-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.289326] hub 1-0:1.0: 6 ports detected
vm-test-run-update-hardware-configuration> target # [    2.292050] uhci_hcd 0000:00:1d.0: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.292941] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
vm-test-run-update-hardware-configuration> target # [    2.303237] virtio_blk virtio3: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.305181] uhci_hcd 0000:00:1d.0: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.308862] virtio_blk virtio3: [vdb] 1048576 512-byte logical blocks (537 MB/512 MiB)
vm-test-run-update-hardware-configuration> target # [    2.310498] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200
vm-test-run-update-hardware-configuration> target # [    2.321478] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.322842] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.345055] usb usb2: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.345839] usb usb2: Manufacturer: Linux 6.18.55 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.357053] usb usb2: SerialNumber: 0000:00:1d.0
vm-test-run-update-hardware-configuration> target # [    2.360841] hub 2-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.371072] hub 2-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.381635] SCSI subsystem initialized
vm-test-run-update-hardware-configuration> target # [    2.198676] (udev-worker)[99]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.202692] (udev-worker)[97]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.400294] uhci_hcd 0000:00:1d.1: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.401167] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
vm-test-run-update-hardware-configuration> target # [    2.225086] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    2.417185] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
vm-test-run-update-hardware-configuration> target # [    2.440089] uhci_hcd 0000:00:1d.1: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.260980] systemd-vconsole-setup[106]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [    2.263930] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    2.454267] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220
vm-test-run-update-hardware-configuration> target # [    2.270479] systemd[1]: Found device /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.272151] systemd[1]: Reached target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    2.274375] systemd[1]: Starting Make File System on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.469602] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.470883] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.480581] usb usb3: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.483080] usb usb3: Manufacturer: Linux 6.18.55 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.483950] usb usb3: SerialNumber: 0000:00:1d.1
vm-test-run-update-hardware-configuration> target # [    2.302363] systemd-makefs[109]: Formatting /dev/vdb as ext4
vm-test-run-update-hardware-configuration> target # [    2.490131] hub 3-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.494987] hub 3-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.499221] uhci_hcd 0000:00:1d.2: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.500074] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
vm-test-run-update-hardware-configuration> target # [    2.504036] uhci_hcd 0000:00:1d.2: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.504922] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240
vm-test-run-update-hardware-configuration> target # [    2.510174] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.513216] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.516039] usb usb4: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.516811] usb usb4: Manufacturer: Linux 6.18.55 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.519038] usb usb4: SerialNumber: 0000:00:1d.2
vm-test-run-update-hardware-configuration> target # [    2.520293] hub 4-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.521761] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
vm-test-run-update-hardware-configuration> target # [    2.523045] hub 4-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.525085] usb 1-1: new high-speed USB device number 2 using ehci-pci
vm-test-run-update-hardware-configuration> target # [    2.527460] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
vm-test-run-update-hardware-configuration> target # [    2.532078] ahci 0000:00:1f.2: flags: 64bit ncq only
vm-test-run-update-hardware-configuration> target # [    2.541431] scsi host0: ahci
vm-test-run-update-hardware-configuration> target # [    2.543263] scsi host1: ahci
vm-test-run-update-hardware-configuration> target # [    2.547724] scsi host2: ahci
vm-test-run-update-hardware-configuration> target # [    2.552065] scsi host3: ahci
vm-test-run-update-hardware-configuration> target # [    2.553773] scsi host4: ahci
vm-test-run-update-hardware-configuration> target # [    2.556221] scsi host5: ahci
vm-test-run-update-hardware-configuration> target # [    2.556846] ata1: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd100 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.559204] ata2: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd180 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.560567] ata3: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd200 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.561933] ata4: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd280 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.563318] ata5: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd300 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.564670] ata6: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd380 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.654982] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
vm-test-run-update-hardware-configuration> target # [    2.656550] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
vm-test-run-update-hardware-configuration> target # [    2.658363] usb 1-1: Product: QEMU USB Tablet
vm-test-run-update-hardware-configuration> target # [    2.659373] usb 1-1: Manufacturer: QEMU
vm-test-run-update-hardware-configuration> target # [    2.660303] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1
vm-test-run-update-hardware-configuration> target # [    2.676368] hid: raw HID events driver (C) Jiri Kosina
vm-test-run-update-hardware-configuration> target # [    2.536113] systemd-makefs[109]: /dev/vdb successfully formatted as ext4 (label "vdb", uuid c827ad69-9bac-4153-ae9c-722228ef40a8)
vm-test-run-update-hardware-configuration> target # [    2.538627] systemd[1]: Finished Make File System on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.540078] systemd[1]: Starting File System Check on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.566618] systemd-fsck[139]: vdb: clean, 12/32768 files, 6385/131072 blocks
vm-test-run-update-hardware-configuration> target # [    2.583615] systemd[1]: Finished File System Check on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.588109] systemd[1]: Mounting /sysroot...
vm-test-run-update-hardware-configuration> target # [    2.875986] ata1: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.877395] ata4: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.878626] ata2: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.880070] ata6: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.881295] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.882675] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
vm-test-run-update-hardware-configuration> target # [    2.883642] ata3.00: applying bridge limits
vm-test-run-update-hardware-configuration> target # [    2.884781] ata5: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.885840] ata3.00: configured for UDMA/100
vm-test-run-update-hardware-configuration> target # [    2.887046] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
vm-test-run-update-hardware-configuration> target # [    2.940166] usbcore: registered new interface driver usbhid
vm-test-run-update-hardware-configuration> target # [    2.944491] usbhid: USB HID core driver
vm-test-run-update-hardware-configuration> target # [    2.957593] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2
vm-test-run-update-hardware-configuration> target # [    2.965657] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
vm-test-run-update-hardware-configuration> target # [    2.972112] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
vm-test-run-update-hardware-configuration> target # [    2.983842] EXT4-fs (vdb): mounted filesystem c827ad69-9bac-4153-ae9c-722228ef40a8 r/w with ordered data mode. Quota mode: none.
vm-test-run-update-hardware-configuration> target # [    2.805190] systemd[1]: Mounted /sysroot.
vm-test-run-update-hardware-configuration> target # [    2.808071] systemd[1]: Reached target Initrd Root File System.
vm-test-run-update-hardware-configuration> target # [    2.810434] systemd[1]: Starting Mountpoints Configured in the Real Root...
vm-test-run-update-hardware-configuration> target # [    2.822351] systemd-sysroot-fstab-check[149]: /sysroot should be mounted in the initrd, will request daemon-reload.
vm-test-run-update-hardware-configuration> target # [    2.825372] systemd[1]: Reload requested from client PID 149 ('systemd-sysroot') (unit initrd-parse-etc.service)...
vm-test-run-update-hardware-configuration> target # [    2.828185] systemd[1]: Reloading...
vm-test-run-update-hardware-configuration> target # [    3.014917] cdrom: Uniform CD-ROM driver Revision: 3.20
vm-test-run-update-hardware-configuration> target # [    2.902963] systemd[1]: Reloading finished in 75 ms.
vm-test-run-update-hardware-configuration> target # [    2.913884] systemd-sysroot-fstab-check[149]: Requesting initrd-fs.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    2.920927] systemd-sysroot-fstab-check[149]: Requesting swap.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    2.924711] systemd[1]: initrd-parse-etc.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    2.926526] systemd[1]: Finished Mountpoints Configured in the Real Root.
vm-test-run-update-hardware-configuration> target # [    2.929603] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.
vm-test-run-update-hardware-configuration> target # [    3.573990] systemd[1]: Mounting /sysroot/nix/.ro-store...
vm-test-run-update-hardware-configuration> target # [    3.577166] systemd[1]: Mounting /sysroot/nix/.rw-store...
vm-test-run-update-hardware-configuration> target # [    3.582144] systemd[1]: Mounting /sysroot/run...
vm-test-run-update-hardware-configuration> target # [    3.584128] systemd[1]: Mounting /sysroot/tmp/shared...
vm-test-run-update-hardware-configuration> target # [    3.589813] systemd[1]: Mounting /sysroot/tmp/xchg...
vm-test-run-update-hardware-configuration> target # [    3.609087] systemd[1]: Mounted /sysroot/run.
vm-test-run-update-hardware-configuration> target # [    3.614071] systemd[1]: Mounted /sysroot/nix/.ro-store.
vm-test-run-update-hardware-configuration> target # [    3.616314] systemd[1]: Mounted /sysroot/nix/.rw-store.
vm-test-run-update-hardware-configuration> target # [    3.618910] systemd[1]: Mounted /sysroot/tmp/shared.
vm-test-run-update-hardware-configuration> target # [    3.622212] systemd[1]: Mounted /sysroot/tmp/xchg.
vm-test-run-update-hardware-configuration> target # [    3.625782] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    3.635852] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.637716] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    4.573693] systemd[1]: Mounting /sysroot/nix/store...
vm-test-run-update-hardware-configuration> target # [    4.592532] systemd[1]: Mounted /sysroot/nix/store.
vm-test-run-update-hardware-configuration> target # [    4.595096] systemd[1]: Reached target Initrd File Systems.
vm-test-run-update-hardware-configuration> target # [    4.596816] systemd[1]: Starting Find NixOS closure...
vm-test-run-update-hardware-configuration> target # [    4.599893] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...
vm-test-run-update-hardware-configuration> target # [    4.618625] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    4.621943] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.626375] systemd[1]: Finished Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    4.628271] systemd[1]: Reached target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    4.629973] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...
vm-test-run-update-hardware-configuration> target # [    4.642346] systemd[1]: Stopped target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    4.643697] systemd[1]: Stopped target Basic System.
vm-test-run-update-hardware-configuration> target # [    4.644910] systemd[1]: Stopped target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    4.647134] systemd[1]: Stopped target Path Units.
vm-test-run-update-hardware-configuration> target # [    4.648047] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.649436] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    4.650743] systemd[1]: Stopped target Slice Units.
vm-test-run-update-hardware-configuration> target # [    4.651653] systemd[1]: Stopped target Socket Units.
vm-test-run-update-hardware-configuration> target # [    4.652648] systemd[1]: Stopped target System Initialization.
vm-test-run-update-hardware-configuration> target # [    4.654282] systemd[1]: Stopped target Swaps.
vm-test-run-update-hardware-configuration> target # [    4.655905] systemd[1]: Stopped target Timer Units.
vm-test-run-update-hardware-configuration> target # [    4.656840] systemd[1]: dbus.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.657902] systemd[1]: Closed D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    4.659126] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.660706] systemd[1]: Stopped Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    4.662161] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    4.663245] systemd[1]: systemd-sysctl.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.664574] systemd[1]: Stopped Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    4.666156] systemd[1]: systemd-modules-load.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.667532] systemd[1]: Stopped Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    4.669160] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.670484] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    4.671793] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.673070] systemd[1]: Stopped Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    4.674658] systemd[1]: Stopped target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    4.675982] systemd[1]: Stopped target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    4.678410] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.679812] systemd[1]: Stopped Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    4.681199] systemd[1]: Stopping Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    4.684162] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.685855] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    4.691887] systemd[1]: initrd-cleanup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.697756] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.
vm-test-run-update-hardware-configuration> target # [    4.704727] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.706337] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    4.708317] systemd[1]: systemd-udevd.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.709536] systemd[1]: Stopped Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    4.711721] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.713989] systemd[1]: Closed udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    4.715159] systemd[1]: Starting Cleanup udev Database...
vm-test-run-update-hardware-configuration> target # [    4.716202] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.717575] systemd[1]: Stopped Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    4.719273] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.720682] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    4.722164] systemd[1]: kmod-static-nodes.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.723673] systemd[1]: Stopped Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    4.736279] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.738357] systemd[1]: Finished Cleanup udev Database.
vm-test-run-update-hardware-configuration> target # [    4.739945] systemd[1]: Reached target Switch Root.
vm-test-run-update-hardware-configuration> target # [    4.741902] systemd[1]: Starting NixOS Activation...
vm-test-run-update-hardware-configuration> target # [    4.790399] initrd-nixos-activation-start[201]: booting system configuration /nix/store/77m1783ayn30p981nrzvh0aa30mqs5rc-nixos-system-target-test
vm-test-run-update-hardware-configuration> target # [    4.812267] initrd-nixos-activation-start[201]: running activation script...
vm-test-run-update-hardware-configuration> target # [    4.972531] initrd-nixos-activation-start[224]: setting up /etc...
vm-test-run-update-hardware-configuration> target: waiting for TCP port 22 on localhost
vm-test-run-update-hardware-configuration> target: waiting for the VM to finish booting
vm-test-run-update-hardware-configuration> target # [    5.057783] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.060090] systemd[1]: Finished NixOS Activation.
vm-test-run-update-hardware-configuration> target # [    5.061843] systemd[1]: Starting Switch Root...
vm-test-run-update-hardware-configuration> target # [    5.073553] systemd[1]: Switching root.
vm-test-run-update-hardware-configuration> target # [    5.384836] systemd-journald[65]: Received SIGTERM from PID 1 (systemd).
vm-test-run-update-hardware-configuration> target # [    6.600662] NET: Registered PF_VSOCK protocol family
vm-test-run-update-hardware-configuration> target # [    6.953217] systemd[1]: systemd 261.3 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    6.957541] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    6.958373] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    6.959287] systemd[1]: Detected first boot.
vm-test-run-update-hardware-configuration> target # [    6.960830] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    7.088471] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    7.138359] systemd[1]: Applying preset policy.
vm-test-run-update-hardware-configuration> target # [    7.272854] systemd[1]: Populated /etc with preset unit settings.
vm-test-run-update-hardware-configuration> target # [    7.438627] systemd[1]: initrd-switch-root.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    7.440235] systemd[1]: Stopped initrd-switch-root.service.
vm-test-run-update-hardware-configuration> target # [    7.442475] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
vm-test-run-update-hardware-configuration> target # [    7.444568] systemd[1]: Created slice Slice /system/getty.
vm-test-run-update-hardware-configuration> target # [    7.445923] systemd[1]: Created slice User and Session Slice.
vm-test-run-update-hardware-configuration> target # [    7.447020] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    7.448348] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
vm-test-run-update-hardware-configuration> target # [    7.449562] systemd[1]: Expecting device /dev/hvc0...
vm-test-run-update-hardware-configuration> target # [    7.450406] systemd[1]: Expecting device /dev/ttyS0...
vm-test-run-update-hardware-configuration> target # [    7.451292] systemd[1]: Reached target Local Encrypted Volumes.
vm-test-run-update-hardware-configuration> target # [    7.452264] systemd[1]: Stopped target initrd-fs.target.
vm-test-run-update-hardware-configuration> target # [    7.453140] systemd[1]: Stopped target initrd-root-fs.target.
vm-test-run-update-hardware-configuration> target # [    7.454075] systemd[1]: Stopped target initrd-switch-root.target.
vm-test-run-update-hardware-configuration> target # [    7.455080] systemd[1]: Reached target Virtual Machines and Containers.
vm-test-run-update-hardware-configuration> target # [    7.456143] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    7.456956] systemd[1]: Reached target Remote File Systems.
vm-test-run-update-hardware-configuration> target # [    7.457894] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    7.458745] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    7.460412] systemd[1]: Listening on Query the User Interactively for a Password.
vm-test-run-update-hardware-configuration> target # [    7.462674] systemd[1]: Listening on Process Core Dump Socket.
vm-test-run-update-hardware-configuration> target # [    7.464381] systemd[1]: Listening on Credential Encryption/Decryption.
vm-test-run-update-hardware-configuration> target # [    7.466192] systemd[1]: Listening on Factory Reset Management.
vm-test-run-update-hardware-configuration> target # [    7.467248] systemd[1]: Listening on Hostname Service Socket.
vm-test-run-update-hardware-configuration> target # [    7.469747] systemd[1]: Starting Journal Log Access Socket...
vm-test-run-update-hardware-configuration> target # [    7.471289] systemd[1]: Listening on Journal Audit Socket.
vm-test-run-update-hardware-configuration> target # [    7.473711] systemd[1]: Listening on Console Output Muting Service Socket.
vm-test-run-update-hardware-configuration> target # [    7.474946] systemd[1]: Listening on Network Management Metrics Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    7.476315] systemd[1]: Listening on Network Management Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    7.477480] systemd[1]: Listening on Network Management Netlink Socket.
vm-test-run-update-hardware-configuration> target # [    7.478658] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
vm-test-run-update-hardware-configuration> target # [    7.479898] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    7.481380] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
vm-test-run-update-hardware-configuration> target # [    7.485052] systemd[1]: Listening on Disk Repartitioning Service Socket.
vm-test-run-update-hardware-configuration> target # [    7.486232] systemd[1]: Listening on Resolve Monitor Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    7.487342] systemd[1]: Listening on Resolve Service Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    7.488461] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    7.489475] systemd[1]: Listening on udev Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    7.491462] systemd[1]: Mounting Huge Pages File System...
vm-test-run-update-hardware-configuration> target # [    7.495131] systemd[1]: Mounting POSIX Message Queue File System...
vm-test-run-update-hardware-configuration> target # [    7.500312] systemd[1]: Mounting Kernel Debug File System...
vm-test-run-update-hardware-configuration> target # [    7.507062] systemd[1]: Mounting Kernel Trace File System...
vm-test-run-update-hardware-configuration> target # [    7.520052] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    7.530245] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    7.537872] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
vm-test-run-update-hardware-configuration> target # [    7.545512] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore
vm-test-run-update-hardware-configuration> target # [    7.547245] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [    7.553389] systemd[1]: Mounting FUSE Control File System...
vm-test-run-update-hardware-configuration> target # [    7.558271] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
vm-test-run-update-hardware-configuration> target # [    7.567566] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    7.573806] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    7.583788] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...
vm-test-run-update-hardware-configuration> target # [    7.594594] systemd[1]: Starting Remount Root and Kernel File Systems...
vm-test-run-update-hardware-configuration> target # [    7.596640] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    7.604702] systemd-journald[294]: Collecting audit messages is enabled.
vm-test-run-update-hardware-configuration> target # [    7.610089] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    7.620800] systemd[1]: Listening on Journal Log Access Socket.
vm-test-run-update-hardware-configuration> target # [    7.625960] systemd[1]: Mounted Huge Pages File System.
vm-test-run-update-hardware-configuration> target # [    7.630300] systemd[1]: Mounted POSIX Message Queue File System.
vm-test-run-update-hardware-configuration> target # [    7.635371] loop: module loaded
vm-test-run-update-hardware-configuration> target # [    7.636242] systemd[1]: Mounted Kernel Debug File System.
vm-test-run-update-hardware-configuration> target # [    7.639334] systemd[1]: Mounted Kernel Trace File System.
vm-test-run-update-hardware-configuration> target # [    7.645727] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    7.651505] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    7.471828] systemd[1]: Queued start job for default target Multi-User System.
vm-test-run-update-hardware-configuration> target # [    7.476526] systemd[1]: Unnecessary job was removed for /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    7.477937] systemd[1]: systemd-journald.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    7.666056] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    7.481609] systemd-modules-load[295]: Inserted module 'loop'
vm-test-run-update-hardware-configuration> target # [    7.670268] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    7.492746] systemd[1]: Mounted FUSE Control File System.
vm-test-run-update-hardware-configuration> target # [    7.497776] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    7.498893] systemd-oomd[297]: No swap; memory pressure usage will be degraded
vm-test-run-update-hardware-configuration> target # [    7.689076] EXT4-fs (vdb): re-mounted c827ad69-9bac-4153-ae9c-722228ef40a8.
vm-test-run-update-hardware-configuration> target # [    7.507243] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.
vm-test-run-update-hardware-configuration> target # [    7.512104] systemd[1]: Finished Remount Root and Kernel File Systems.
vm-test-run-update-hardware-configuration> target # [    7.516101] systemd[1]: Listening on Disk Image Download Service Socket.
vm-test-run-update-hardware-configuration> target # [    7.518789] systemd[1]: Mounting Kernel Configuration File System...
vm-test-run-update-hardware-configuration> target # [    7.522092] systemd[1]: Starting Firewall...
vm-test-run-update-hardware-configuration> target # [    7.533121] systemd[1]: Starting Flush Journal to Persistent Storage...
vm-test-run-update-hardware-configuration> target # [    7.534352] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore
vm-test-run-update-hardware-configuration> target # [    7.547679] systemd[1]: Starting Load/Save OS Random Seed...
vm-test-run-update-hardware-configuration> target # [    7.559964] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    7.564739] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    7.566588] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    7.791313] systemd-journald[294]: Received client request to flush runtime journal.
vm-test-run-update-hardware-configuration> target # [    7.792252] systemd[1]: Finished Load/Save OS Random Seed.
vm-test-run-update-hardware-configuration> target # [    7.794647] systemd[1]: Reached target First Boot Complete.
vm-test-run-update-hardware-configuration> target # [    7.800101] systemd[1]: Mounted Kernel Configuration File System.
vm-test-run-update-hardware-configuration> target # [    7.802306] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    7.806293] systemd[1]: Starting Network Name Resolution...
vm-test-run-update-hardware-configuration> target # [    7.807346] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    7.810147] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    7.811805] systemd[1]: Finished Flush Journal to Persistent Storage.
vm-test-run-update-hardware-configuration> target # [    7.829546] systemd-resolved[324]: Positive Trust Anchors:
vm-test-run-update-hardware-configuration> target # [    7.831526] systemd-resolved[324]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
vm-test-run-update-hardware-configuration> target # [    7.835321] systemd-resolved[324]: . IN DS 38696 8 2 683d2d0acb8c9b712a1948b27f741219298d0a450d612c483af444a4c0fb2b16
vm-test-run-update-hardware-configuration> target # [    7.839170] systemd-resolved[324]: Negative trust anchors: home.arpa 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 170.0.0.192.in-addr.arpa 171.0.0.192.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa ipv4only.arpa resolver.arpa corp home internal intranet lan local private test
vm-test-run-update-hardware-configuration> target # [    7.857381] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    7.859908] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    7.864603] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    7.901953] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    7.911730] systemd-resolved[324]: Using system hostname 'target'.
vm-test-run-update-hardware-configuration> target # [    7.914974] systemd[1]: Started Network Name Resolution.
vm-test-run-update-hardware-configuration> target # [    7.926890] systemd-udevd[337]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    7.964216] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    8.078849] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [    8.146249] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.
vm-test-run-update-hardware-configuration> target # [    8.195913] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.
vm-test-run-update-hardware-configuration> target # [    8.206387] (udev-worker)[368]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    8.209831] (udev-worker)[364]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    8.262215] systemd[1]: Mounting /run/wrappers...
vm-test-run-update-hardware-configuration> target # [    8.302500] systemd[1]: Mounted /run/wrappers.
vm-test-run-update-hardware-configuration> target # [    8.303461] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    8.308093] systemd[1]: Listening on Boot Loader Control Service Socket.
vm-test-run-update-hardware-configuration> target # [    8.311385] systemd[1]: Starting register-nix-paths.service...
vm-test-run-update-hardware-configuration> target # [    8.316139] systemd[1]: Starting Create SUID/SGID Wrappers...
vm-test-run-update-hardware-configuration> target # [    8.317538] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.
vm-test-run-update-hardware-configuration> target # [    8.324121] systemd[1]: Starting Save Transient machine-id to Disk...
vm-test-run-update-hardware-configuration> target # [    8.345048] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    8.443553] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    8.454090] systemd[1]: Starting Rebuild Journal Catalog...
vm-test-run-update-hardware-configuration> target # [    8.461828] systemd[1]: Starting Record System Boot/Shutdown in UTMP...
vm-test-run-update-hardware-configuration> target # [    8.566274] systemd[1]: Finished Record System Boot/Shutdown in UTMP.
vm-test-run-update-hardware-configuration> target # [    8.577938] systemd[1]: Finished Rebuild Journal Catalog.
vm-test-run-update-hardware-configuration> target # [    8.587350] systemd[1]: Starting Update is Completed...
vm-test-run-update-hardware-configuration> target # [    8.790090] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
vm-test-run-update-hardware-configuration> target # [    8.648536] systemd[1]: Finished Update is Completed.
vm-test-run-update-hardware-configuration> target # [    8.836685] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
vm-test-run-update-hardware-configuration> target # [    8.841419] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console
vm-test-run-update-hardware-configuration> target # [    8.877502] mousedev: PS/2 mouse device common for all mice
vm-test-run-update-hardware-configuration> target # [    8.902818] ACPI: button: Power Button [PWRF]
vm-test-run-update-hardware-configuration> target # [    8.726816] systemd[1]: Finished Firewall.
vm-test-run-update-hardware-configuration> target # [    8.728372] systemd[1]: Reached target Preparation for Network.
vm-test-run-update-hardware-configuration> target # [    8.733275] systemd[1]: Listening on Network Management Resolve Hook Socket.
vm-test-run-update-hardware-configuration> target # [    8.740768] systemd[1]: Starting Network Management...
vm-test-run-update-hardware-configuration> target # [    8.861081] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    8.865263] systemd[1]: Finished Create SUID/SGID Wrappers.
vm-test-run-update-hardware-configuration> target # [    8.870146] systemd-resolved[324]: Clock change detected. Flushing caches.
vm-test-run-update-hardware-configuration> target # [    8.919149] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:07.0/virtio5/input/input4
vm-test-run-update-hardware-configuration> target # [    9.020371] rtc_cmos PNP0B00:00: RTC can wake from S4
vm-test-run-update-hardware-configuration> target # [    9.055145] rtc_cmos PNP0B00:00: registered as rtc0
vm-test-run-update-hardware-configuration> target # [    9.055248] rtc_cmos PNP0B00:00: setting system clock to 2026-10-14T10:09:42 UTC (1791972582)
vm-test-run-update-hardware-configuration> target # [    9.055343] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
vm-test-run-update-hardware-configuration> target # [    9.059030] systemd-journald[294]: Time jumped backwards, rotating.
vm-test-run-update-hardware-configuration> target # [    9.068358] Console: switching to colour dummy device 80x25
vm-test-run-update-hardware-configuration> target # [    9.154531] parport_pc 00:02: reported by Plug and Play ACPI
vm-test-run-update-hardware-configuration> target # [    9.154624] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
vm-test-run-update-hardware-configuration> target # [    9.001659] systemd[1]: Finished register-nix-paths.service.
vm-test-run-update-hardware-configuration> target # [    9.004135] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    9.006120] systemd[1]: Started Discard unused filesystem blocks once a week.
vm-test-run-update-hardware-configuration> target # [    9.007825] systemd[1]: Started Daily Cleanup of Temporary Directories.
vm-test-run-update-hardware-configuration> target # [    9.010183] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    9.011707] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    9.015468] systemd[1]: Listening on Nix Daemon Socket.
vm-test-run-update-hardware-configuration> target # [    9.020076] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).
vm-test-run-update-hardware-configuration> target # [    9.021539] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.
vm-test-run-update-hardware-configuration> target # [    9.022997] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    9.024639] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    9.028773] systemd[1]: Started backdoor.service.
vm-test-run-update-hardware-configuration> target # [    9.032290] systemd[1]: Starting Import lastlog data into lastlog2 database...
vm-test-run-update-hardware-configuration> target # [    9.037967] systemd[1]: Starting Name Service Cache Daemon (nsncd)...
vm-test-run-update-hardware-configuration> target # [    9.156201] cfg80211: Loading compiled-in X.509 certificates for regulatory database
vm-test-run-update-hardware-configuration> target # [    9.199379] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
vm-test-run-update-hardware-configuration> target # [    9.050989] systemd[1]: Starting Post-Boot Actions...
vm-test-run-update-hardware-configuration> target # [    9.062319] systemd-networkd[509]: lo: Link UP
vm-test-run-update-hardware-configuration> target # [    9.063975] systemd-networkd[509]: lo: Gained carrier
vm-test-run-update-hardware-configuration> target # [    9.070670] systemd[1]: Started Reset console on configuration changes.
vm-test-run-update-hardware-configuration> target # [    9.075695] systemd-networkd[509]: eth0: Configuring with /etc/systemd/network/99-ethernet-default-dhcp.network.
vm-test-run-update-hardware-configuration> target # [    9.084501] systemd-networkd[509]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [    9.087109] systemd-networkd[509]: eth1: Configuring with /etc/systemd/network/40-eth1.network.
vm-test-run-update-hardware-configuration> target # [    9.088533] systemd-networkd[509]: eth0: Link UP
vm-test-run-update-hardware-configuration> target # [    9.094266] systemd-networkd[509]: eth0: Gained carrier
vm-test-run-update-hardware-configuration> target # connecting to host...
vm-test-run-update-hardware-configuration> target # [    9.137100] systemd[1]: Starting SSH Host Keys Generation...
vm-test-run-update-hardware-configuration> target # [    9.199466] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
vm-test-run-update-hardware-configuration> target # [    9.200028] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
vm-test-run-update-hardware-configuration> target # [    9.143320] systemd[1]: Started Network Management.
vm-test-run-update-hardware-configuration> target # [    9.148147] systemd-networkd[509]: eth1: Link UP
vm-test-run-update-hardware-configuration> target # [    9.152384] systemd-networkd[509]: eth1: Gained carrier
vm-test-run-update-hardware-configuration> target # [    9.153672] systemd-networkd[509]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [    9.157537] systemd-networkd[509]: eth0: DHCPv4 address 10.0.2.15/24, gateway 10.0.2.2 acquired from 10.0.2.2
vm-test-run-update-hardware-configuration> target: Guest shell says: b'Spawning backdoor root shell...\n'
vm-test-run-update-hardware-configuration> target: connected to guest root shell
vm-test-run-update-hardware-configuration> target: (connecting took 4.16 seconds)
vm-test-run-update-hardware-configuration> target: (finished: waiting for the VM to finish booting, in 4.16 seconds)
vm-test-run-update-hardware-configuration> target # [    9.160917] systemd[1]: Finished Post-Boot Actions.
vm-test-run-update-hardware-configuration> target # [    9.187251] nsncd[537]: Oct 14 10:09:42.816 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"
vm-test-run-update-hardware-configuration> target # [    9.192580] systemd[1]: Started Name Service Cache Daemon (nsncd).
vm-test-run-update-hardware-configuration> target # [    9.207082] systemd[1]: Reached target Network.
vm-test-run-update-hardware-configuration> target # [    9.209349] systemd[1]: Reached target Host and Network Name Lookups.
vm-test-run-update-hardware-configuration> target # [    9.211185] systemd[1]: Reached target User and Group Name Lookups.
vm-test-run-update-hardware-configuration> target # [    9.222464] systemd[1]: Starting D-Bus System Message Bus...
vm-test-run-update-hardware-configuration> target # [    9.232459] systemd[1]: Starting User Login Management...
vm-test-run-update-hardware-configuration> target # [    9.246256] systemd[1]: Starting Enable Persistent Storage in systemd-networkd...
vm-test-run-update-hardware-configuration> target # [    9.200032] cfg80211: failed to load regulatory.db
vm-test-run-update-hardware-configuration> target # [    9.320778] NET: Registered PF_PACKET protocol family
vm-test-run-update-hardware-configuration> target # [    9.279109] systemd[1]: Starting Permit User Sessions...
vm-test-run-update-hardware-configuration> target # [    9.286500] systemd[1]: Finished Import lastlog data into lastlog2 database.
vm-test-run-update-hardware-configuration> target # [    9.482715] [drm] Found bochs VGA, ID 0xb0c5.
vm-test-run-update-hardware-configuration> target # [    9.482717] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
vm-test-run-update-hardware-configuration> target # [    9.489650] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic
vm-test-run-update-hardware-configuration> target # [    9.498146] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
vm-test-run-update-hardware-configuration> target # [    9.499034] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
vm-test-run-update-hardware-configuration> target # [    9.515930] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6
vm-test-run-update-hardware-configuration> target # [    9.333921] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.527772] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5
vm-test-run-update-hardware-configuration> target # [    9.347406] systemd[1]: Finished Save Transient machine-id to Disk.
vm-test-run-update-hardware-configuration> target # [    9.372311] systemd[1]: Finished Permit User Sessions.
vm-test-run-update-hardware-configuration> target # [    9.559264] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0
vm-test-run-update-hardware-configuration> target # [    9.380379] systemd[1]: Started Getty on tty1.
vm-test-run-update-hardware-configuration> target # [    9.381267] systemd[1]: Reached target Login Prompts.
vm-test-run-update-hardware-configuration> target # [    9.385693] systemd[1]: Finished Enable Persistent Storage in systemd-networkd.
vm-test-run-update-hardware-configuration> target # [    9.422778] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    9.437252] systemd-logind[568]: New seat seat0.
vm-test-run-update-hardware-configuration> target # [    9.441108] systemd[1]: Started User Login Management.
vm-test-run-update-hardware-configuration> target # [    9.449946] systemd[1]: Starting linger-users.service...
vm-test-run-update-hardware-configuration> target # [    9.456206] dbus-broker-launch[566]: Looking up NSS user entry for 'systemd-timesync'...
vm-test-run-update-hardware-configuration> target # [    9.464299] dbus-broker-launch[566]: NSS returned no entry for 'systemd-timesync'
vm-test-run-update-hardware-configuration> target # [    9.465610] dbus-broker-launch[566]: Invalid user-name in /nix/store/jd4vq91w0sq04vqjhlg7k7qy6yl4mv8p-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"
vm-test-run-update-hardware-configuration> target # [    9.749560] iTCO_wdt iTCO_wdt.0.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
vm-test-run-update-hardware-configuration> target # [    9.758080] iTCO_wdt iTCO_wdt.0.auto: initialized. heartbeat=30 sec (nowayout=0)
vm-test-run-update-hardware-configuration> target # [    9.808580] Console: switching to colour frame buffer device 160x50
vm-test-run-update-hardware-configuration> target # [    9.833234] ppdev: user-space parallel port driver
vm-test-run-update-hardware-configuration> target # [    9.897999] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device
vm-test-run-update-hardware-configuration> target # [    9.490432] systemd-logind[568]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)
vm-test-run-update-hardware-configuration> target # [    9.721958] systemd[1]: Started D-Bus System Message Bus.
vm-test-run-update-hardware-configuration> target # [    9.723312] systemd[1]: linger-users.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.725497] systemd[1]: Finished linger-users.service.
vm-test-run-update-hardware-configuration> target # [    9.729296] dbus-broker-launch[566]: Ready
vm-test-run-update-hardware-configuration> target # [    9.730390] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
vm-test-run-update-hardware-configuration> target # [    9.735084] systemd-logind[568]: Watching system buttons on /dev/input/event2 (Power Button)
vm-test-run-update-hardware-configuration> target # [    9.736432] systemd-logind[568]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)
vm-test-run-update-hardware-configuration> target # [    9.737860] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.739130] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    9.743577] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    9.758259] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.763928] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    9.768071] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    9.856909] sshd-keygen-start[576]: Generating public/private rsa key pair.
vm-test-run-update-hardware-configuration> target # [    9.858179] sshd-keygen-start[576]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key
vm-test-run-update-hardware-configuration> target # [    9.859646] sshd-keygen-start[576]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
vm-test-run-update-hardware-configuration> target # [    9.862126] sshd-keygen-start[576]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [    9.863084] sshd-keygen-start[576]: SHA256:S/OFACpgD3NsapF0xz2cndSsb2ZiJWs+bypqMM0fov8 root@target
vm-test-run-update-hardware-configuration> target # [    9.864477] sshd-keygen-start[576]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [    9.865558] sshd-keygen-start[576]: +---[RSA 4096]----+
vm-test-run-update-hardware-configuration> target # [    9.866478] sshd-keygen-start[576]: |o=oo..+ +.+      |
vm-test-run-update-hardware-configuration> target # [    9.868217] sshd-keygen-start[576]: |.+*o.o * o o     |
vm-test-run-update-hardware-configuration> target # [    9.869117] sshd-keygen-start[576]: |  =..   o .      |
vm-test-run-update-hardware-configuration> target # [    9.870031] sshd-keygen-start[576]: | o .     + o     |
vm-test-run-update-hardware-configuration> target # [    9.870879] sshd-keygen-start[576]: |.   o   S * .    |
vm-test-run-update-hardware-configuration> target # [    9.871767] sshd-keygen-start[576]: |   o + o O *     |
vm-test-run-update-hardware-configuration> target # [    9.873292] sshd-keygen-start[576]: |    + o * *      |
vm-test-run-update-hardware-configuration> target # [    9.874302] sshd-keygen-start[576]: |   . . o o .     |
vm-test-run-update-hardware-configuration> target # [    9.875880] sshd-keygen-start[576]: |    oooE..=.     |
vm-test-run-update-hardware-configuration> target # [    9.878701] sshd-keygen-start[576]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [   10.087556] kvm_amd: TSC scaling supported
vm-test-run-update-hardware-configuration> target # [   10.088102] kvm_amd: Nested Virtualization enabled
vm-test-run-update-hardware-configuration> target # [   10.088661] kvm_amd: Nested Paging enabled
vm-test-run-update-hardware-configuration> target # [   10.089515] kvm_amd: LBR virtualization supported
vm-test-run-update-hardware-configuration> target # [   10.090510] kvm_amd: Virtual GIF supported
vm-test-run-update-hardware-configuration> target # [   10.091447] kvm_amd: Virtual NMI enabled
vm-test-run-update-hardware-configuration> target # [    9.916683] sshd-keygen-start[610]: Generating public/private ed25519 key pair.
vm-test-run-update-hardware-configuration> target # [    9.917912] sshd-keygen-start[610]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
vm-test-run-update-hardware-configuration> target # [    9.919389] sshd-keygen-start[610]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
vm-test-run-update-hardware-configuration> target # [    9.920828] sshd-keygen-start[610]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [    9.921855] sshd-keygen-start[610]: SHA256:13g4RlLr9UEqZEzTahGAA5UQ0PZziUr+7jhsXo+2gEA root@target
vm-test-run-update-hardware-configuration> target # [    9.923234] sshd-keygen-start[610]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [    9.924245] sshd-keygen-start[610]: +--[ED25519 256]--+
vm-test-run-update-hardware-configuration> target # [    9.925141] sshd-keygen-start[610]: |  .o+=.o.+Bo  .  |
vm-test-run-update-hardware-configuration> target # [    9.926035] sshd-keygen-start[610]: |    o +  +oo.o   |
vm-test-run-update-hardware-configuration> target # [    9.926899] sshd-keygen-start[610]: | E . . o..+oo .  |
vm-test-run-update-hardware-configuration> target # [    9.928725] sshd-keygen-start[610]: |.   . + o+o* . . |
vm-test-run-update-hardware-configuration> target # [    9.929651] sshd-keygen-start[610]: |.  o . oS.B o .  |
vm-test-run-update-hardware-configuration> target # [    9.931262] sshd-keygen-start[610]: | . .o    o o     |
vm-test-run-update-hardware-configuration> target # [    9.933283] sshd-keygen-start[610]: |  .....          |
vm-test-run-update-hardware-configuration> target # [    9.934441] sshd-keygen-start[610]: |    ++oo         |
vm-test-run-update-hardware-configuration> target # [    9.936298] sshd-keygen-start[610]: |   oo==..        |
vm-test-run-update-hardware-configuration> target # [    9.937217] sshd-keygen-start[610]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [    9.938219] systemd[1]: sshd-keygen.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.940365] systemd[1]: Finished SSH Host Keys Generation.
vm-test-run-update-hardware-configuration> target # [    9.945673] systemd[1]: Starting SSH Daemon...
vm-test-run-update-hardware-configuration> target # [   10.150351] EDAC MC: Ver: 3.0.0
vm-test-run-update-hardware-configuration> target # [    9.976131] sshd[612]: Server listening on 0.0.0.0 port 22.
vm-test-run-update-hardware-configuration> target # [    9.978071] sshd[612]: Server listening on :: port 22.
vm-test-run-update-hardware-configuration> target # [    9.979584] systemd[1]: Started SSH Daemon.
vm-test-run-update-hardware-configuration> target # [    9.980947] systemd[1]: Reached target Multi-User System.
vm-test-run-update-hardware-configuration> target # [   10.036575] systemd-vconsole-setup[603]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [   10.039984] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [   10.044241] systemd[1]: Startup finished in 985ms (kernel) + 5.415s (initrd) + 3.642s (userspace) = 10.043s.
vm-test-run-update-hardware-configuration> target # Connection to localhost (::1) 22 port [tcp/ssh] succeeded!
vm-test-run-update-hardware-configuration> target: (finished: waiting for TCP port 22 on localhost, in 5.32 seconds)
vm-test-run-update-hardware-configuration> Setting up port forwarding from host port 46607 to guest port 22
vm-test-run-update-hardware-configuration> target # [   10.319696] sshd-session[619]: Connection closed by ::1 port 49378 [preauth]
vm-test-run-update-hardware-configuration> target # [   10.548493] systemd-networkd[509]: eth0: Gained IPv6LL
vm-test-run-update-hardware-configuration> target # [   10.996283] systemd-networkd[509]: eth1: Gained IPv6LL
vm-test-run-update-hardware-configuration> Host port 46607 is now listening
vm-test-run-update-hardware-configuration> target # [   12.322385] sshd-session[622]: Connection closed by 10.0.2.2 port 48774 [preauth]
vm-test-run-update-hardware-configuration> target # [   21.779985] sshd-session[626]: Accepted publickey for nonrootuser from 10.0.2.2 port 54026 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   21.786524] sshd-session[626]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   21.801648] systemd[1]: Created slice Slice /user/1000.
vm-test-run-update-hardware-configuration> target # [   21.804144] systemd[1]: Starting User Runtime Directory /run/user/1000...
vm-test-run-update-hardware-configuration> target # [   21.824520] systemd-logind[568]: New session '1' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   21.841556] systemd[1]: Finished User Runtime Directory /run/user/1000.
vm-test-run-update-hardware-configuration> target # [   21.847396] systemd[1]: Starting User Manager for UID 1000...
vm-test-run-update-hardware-configuration> target # [   21.867843] (systemd)[632]: pam_unix(systemd-user:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   21.872498] systemd-logind[568]: New session '2' of user 'nonrootuser' with class 'manager' and type 'unspecified'.
vm-test-run-update-hardware-configuration> target # [   21.887896] systemd[632]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   21.970351] systemd[632]: Queued start job for default target Main User Target.
vm-test-run-update-hardware-configuration> target # [   21.973927] systemd[632]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   21.976864] systemd[632]: Created slice User Application Slice.
vm-test-run-update-hardware-configuration> target # [   21.978135] systemd[632]: Started Daily Cleanup of User's Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   21.980260] systemd[632]: Reached target Paths.
vm-test-run-update-hardware-configuration> target # [   21.981278] systemd[632]: Reached target Timers.
vm-test-run-update-hardware-configuration> target # [   21.983128] systemd[632]: Starting D-Bus User Message Bus Socket...
vm-test-run-update-hardware-configuration> target # [   21.986516] systemd[632]: Starting Create User Files and Directories...
vm-test-run-update-hardware-configuration> target # [   22.008738] systemd[632]: Finished Create User Files and Directories.
vm-test-run-update-hardware-configuration> target # [   22.016987] systemd[632]: Listening on D-Bus User Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   22.019362] systemd[632]: Reached target Sockets.
vm-test-run-update-hardware-configuration> target # [   22.020243] systemd[632]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   22.021197] systemd[1]: Started User Manager for UID 1000.
vm-test-run-update-hardware-configuration> target # [   22.024623] systemd[632]: Starting Run user-specific NixOS activation...
vm-test-run-update-hardware-configuration> target # [   22.028598] systemd[1]: Started Session 1 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   22.054849] systemd[632]: Finished Run user-specific NixOS activation.
vm-test-run-update-hardware-configuration> target # [   22.056929] systemd[632]: Reached target Main User Target.
vm-test-run-update-hardware-configuration> target # [   22.058087] systemd[632]: Startup finished in 172ms.
vm-test-run-update-hardware-configuration> target # [   22.094143] sudo[654]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-facter
vm-test-run-update-hardware-configuration> target # [   22.100412] sudo[654]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   22.366517] sr 2:0:0:0: Attached scsi generic sg0 type 5
vm-test-run-update-hardware-configuration> target # [   22.288305] sudo[654]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   22.296461] sshd-session[645]: Received disconnect from 10.0.2.2 port 54026:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   22.298045] sshd-session[645]: Disconnected from user nonrootuser 10.0.2.2 port 54026
vm-test-run-update-hardware-configuration> target # [   22.299686] sshd-session[626]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   22.303745] systemd-logind[568]: Session 1 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> target # [   31.570336] sshd-session[684]: Accepted publickey for nonrootuser from 10.0.2.2 port 52878 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   31.577365] sshd-session[684]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   31.583203] systemd-logind[568]: New session '3' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   31.586638] systemd[1]: Started Session 3 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   31.634165] sudo[694]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-generate-config --no-filesystems --show-hardware-config
vm-test-run-update-hardware-configuration> target # [   31.640959] sudo[694]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   31.775918] sudo[694]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   31.784173] sshd-session[687]: Received disconnect from 10.0.2.2 port 52878:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   31.785659] sshd-session[687]: Disconnected from user nonrootuser 10.0.2.2 port 52878
vm-test-run-update-hardware-configuration> target # [   31.787216] sshd-session[684]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   31.791409] systemd-logind[568]: Session 3 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> (finished: run the VM test script, in 33.28 seconds)
vm-test-run-update-hardware-configuration> test script finished in 33.87s
vm-test-run-update-hardware-configuration> cleanup
vm-test-run-update-hardware-configuration> kill QemuMachine (pid 45)
vm-test-run-update-hardware-configuration> target # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/lb41b0anx1f98y9y5s9mdv97gjgsq740-python3-3.14.7/bin/python3.14)
vm-test-run-update-hardware-configuration> target # [2026-10-14T10:10:07Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-10-14T10:10:07Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-10-14T10:10:07Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> (finished: cleanup, in 0.13 seconds)