don't know how to build these paths:
  /nix/store/cl31vviwrr32j0q9rhsmjbcar5m2f7m1-vm-test-run-update-hardware-configuration.drv
warning: ignoring the client-specified setting 'store', because it is a restricted setting and you are not a trusted user
building '/nix/store/yg13kj45w9ln4s34ysj6m6h3bn2ymg9j-test-script.drv' on nix-store.geninf.io:50051
test-script> gi-build-x86-02: building yg13kj45w9ln4s34ysj6m6h3bn2ymg9j-test-script.drv
test-script> structuredAttrs is enabled
building '/nix/store/1934bjdxvlb20xk5zr65h2bn5wbsk59l-driverConfiguration.json.drv' on nix-store.geninf.io:50051
driverConfiguration.json> gi-build-x86-02: building 1934bjdxvlb20xk5zr65h2bn5wbsk59l-driverConfiguration.json.drv
driverConfiguration.json> structuredAttrs is enabled
building '/nix/store/wzsiylg6jkx89yj1anqpzcbhrvaj4x63-nixos-test-driver-update-hardware-configuration.drv' on nix-store.geninf.io:50051
nixos-test-driver-update-hardware-configuration> gi-build-x86-02: building wzsiylg6jkx89yj1anqpzcbhrvaj4x63-nixos-test-driver-update-hardware-configuration.drv
nixos-test-driver-update-hardware-configuration> Running type check (enable/disable: config.skipTypeCheck)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck
nixos-test-driver-update-hardware-configuration> All checks passed!
nixos-test-driver-update-hardware-configuration> Linting test script (enable/disable: config.skipLint)
nixos-test-driver-update-hardware-configuration> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint
nixos-test-driver-update-hardware-configuration> All checks passed!
building '/nix/store/cl31vviwrr32j0q9rhsmjbcar5m2f7m1-vm-test-run-update-hardware-configuration.drv' on nix-store.geninf.io:50051
vm-test-run-update-hardware-configuration> gi-build-x86-02: building cl31vviwrr32j0q9rhsmjbcar5m2f7m1-vm-test-run-update-hardware-configuration.drv
vm-test-run-update-hardware-configuration> Machine state will be reset. To keep it, pass --keep-machine-state
vm-test-run-update-hardware-configuration> start all VLans
vm-test-run-update-hardware-configuration> (finished: start all VLans, in 0.00 seconds)
vm-test-run-update-hardware-configuration> Test will time out and terminate in 3600.0 seconds
vm-test-run-update-hardware-configuration> run the VM test script
vm-test-run-update-hardware-configuration> additionally exposed symbols:
vm-test-run-update-hardware-configuration>     target,
vm-test-run-update-hardware-configuration>     vlan1,
vm-test-run-update-hardware-configuration>     start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh
vm-test-run-update-hardware-configuration> target: starting vm
vm-test-run-update-hardware-configuration> target # Disk image does not exist, creating the virtualisation disk image...
vm-test-run-update-hardware-configuration> target # Formatting '/build/vm-state-target/tmp.7XRA2g1q7M', fmt=raw size=8589934592
vm-test-run-update-hardware-configuration> target # mke2fs 1.47.4 (6-Mar-2025)
vm-test-run-update-hardware-configuration> target # Discarding device blocks:       0/2097152               done
vm-test-run-update-hardware-configuration> target # Creating filesystem with 2097152 4k blocks and 524288 inodes
vm-test-run-update-hardware-configuration> target # Filesystem UUID: b290ee11-9356-4354-aec6-42667eb9260e
vm-test-run-update-hardware-configuration> target # Superblock backups stored on blocks:
vm-test-run-update-hardware-configuration> target # 	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Allocating group tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Writing inode tables:  0/64     done
vm-test-run-update-hardware-configuration> target # Creating journal (16384 blocks): done
vm-test-run-update-hardware-configuration> target # Writing superblocks and filesystem accounting information:  0/64     done
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Virtualisation disk image created.
vm-test-run-update-hardware-configuration> target # Formatting 'empty0.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=536870912 lazy_refcounts=off refcount_bits=16
vm-test-run-update-hardware-configuration> target # Starting virtiofs daemons...
vm-test-run-update-hardware-configuration> target # [2026-10-14T13:17:43Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-14T13:17:43Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-14T13:17:43Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-14T13:17:43Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-14T13:17:43Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-14T13:17:43Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)
vm-test-run-update-hardware-configuration> target # [2026-10-14T13:17:43Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether
vm-test-run-update-hardware-configuration> target # [2026-10-14T13:17:43Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-14T13:17:43Z INFO  virtiofsd] Waiting for vhost-user socket connection...
vm-test-run-update-hardware-configuration> target # [2026-10-14T13:17:43Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-10-14T13:17:43Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target # [2026-10-14T13:17:43Z INFO  virtiofsd] Client connected, servicing requests
vm-test-run-update-hardware-configuration> target: QEMU running (pid 45)
vm-test-run-update-hardware-configuration> target # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC550+7EF2C550 CA00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:02.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # iPXE (http://ipxe.org) 00:06.0 CB00 PCI2.10 PnP PMM 7EFCC550 7EF2C550 CB00
vm-test-run-update-hardware-configuration> target # Press Ctrl-B to configure iPXE (PCI 00:06.0)...
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # 
vm-test-run-update-hardware-configuration> target # Booting from ROM...
vm-test-run-update-hardware-configuration> target # Probing EDD (edd=off to disable)... ok[    0.000000] Linux version 6.18.55 (nixbld@localhost) (gcc (GCC) 16.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Sat Oct  3 10:39:03 UTC 2026
vm-test-run-update-hardware-configuration> target # [    0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/77m1783ayn30p981nrzvh0aa30mqs5rc-nixos-system-target-test/init regInfo=/nix/.ro-store/qj8myhcl401ndrn40rwq18ldgzjfzn8p-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-provided physical RAM map:
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd4fff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000007ffd5000-0x000000007fffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013e7fffff] usable
vm-test-run-update-hardware-configuration> target # [    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
vm-test-run-update-hardware-configuration> target # [    0.000000] NX (Execute Disable) protection: active
vm-test-run-update-hardware-configuration> target # [    0.000000] APIC: Static calls initialized
vm-test-run-update-hardware-configuration> target # [    0.000000] SMBIOS 2.8 present.
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
vm-test-run-update-hardware-configuration> target # [    0.000000] DMI: Memory slots populated: 1/1
vm-test-run-update-hardware-configuration> target # [    0.000000] Hypervisor detected: KVM
vm-test-run-update-hardware-configuration> target # [    0.000000] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
vm-test-run-update-hardware-configuration> target # [    0.000000] kvm-clock: using sched offset of 393225480 cycles
vm-test-run-update-hardware-configuration> target # [    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
vm-test-run-update-hardware-configuration> target # [    0.000003] tsc: Detected 4192.144 MHz processor
vm-test-run-update-hardware-configuration> target # [    0.000581] last_pfn = 0x13e800 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.000615] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
vm-test-run-update-hardware-configuration> target # [    0.000617] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
vm-test-run-update-hardware-configuration> target # [    0.000656] last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
vm-test-run-update-hardware-configuration> target # [    0.002310] found SMP MP-table at [mem 0x000f5450-0x000f545f]
vm-test-run-update-hardware-configuration> target # [    0.002322] Using GB pages for direct mapping
vm-test-run-update-hardware-configuration> target # [    0.002429] RAMDISK: [mem 0x7e2e3000-0x7ffcffff]
vm-test-run-update-hardware-configuration> target # [    0.002434] ACPI: Early table checksum verification disabled
vm-test-run-update-hardware-configuration> target # [    0.002435] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS )
vm-test-run-update-hardware-configuration> target # [    0.002437] ACPI: RSDT 0x000000007FFE2433 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002440] ACPI: FACP 0x000000007FFE222B 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002444] ACPI: DSDT 0x000000007FFE0040 0021EB (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002446] ACPI: FACS 0x000000007FFE0000 000040
vm-test-run-update-hardware-configuration> target # [    0.002447] ACPI: APIC 0x000000007FFE231F 000078 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002448] ACPI: HPET 0x000000007FFE2397 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002450] ACPI: MCFG 0x000000007FFE23CF 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002451] ACPI: WAET 0x000000007FFE240B 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
vm-test-run-update-hardware-configuration> target # [    0.002452] ACPI: Reserving FACP table memory at [mem 0x7ffe222b-0x7ffe231e]
vm-test-run-update-hardware-configuration> target # [    0.002453] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe222a]
vm-test-run-update-hardware-configuration> target # [    0.002453] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
vm-test-run-update-hardware-configuration> target # [    0.002454] ACPI: Reserving APIC table memory at [mem 0x7ffe231f-0x7ffe2396]
vm-test-run-update-hardware-configuration> target # [    0.002454] ACPI: Reserving HPET table memory at [mem 0x7ffe2397-0x7ffe23ce]
vm-test-run-update-hardware-configuration> target # [    0.002455] ACPI: Reserving MCFG table memory at [mem 0x7ffe23cf-0x7ffe240a]
vm-test-run-update-hardware-configuration> target # [    0.002455] ACPI: Reserving WAET table memory at [mem 0x7ffe240b-0x7ffe2432]
vm-test-run-update-hardware-configuration> target # [    0.002801] No NUMA configuration found
vm-test-run-update-hardware-configuration> target # [    0.002802] Faking a node at [mem 0x0000000000000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002805] NODE_DATA(0) allocated [mem 0x13e7f8780-0x13e7fdcff]
vm-test-run-update-hardware-configuration> target # [    0.002883] Zone ranges:
vm-test-run-update-hardware-configuration> target # [    0.002883]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
vm-test-run-update-hardware-configuration> target # [    0.002885]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
vm-test-run-update-hardware-configuration> target # [    0.002886]   Normal   [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002886]   Device   empty
vm-test-run-update-hardware-configuration> target # [    0.002887] Movable zone start for each node
vm-test-run-update-hardware-configuration> target # [    0.002888] Early memory node ranges
vm-test-run-update-hardware-configuration> target # [    0.002888]   node   0: [mem 0x0000000000001000-0x000000000009efff]
vm-test-run-update-hardware-configuration> target # [    0.002889]   node   0: [mem 0x0000000000100000-0x000000007ffd4fff]
vm-test-run-update-hardware-configuration> target # [    0.002890]   node   0: [mem 0x0000000100000000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002891] Initmem setup node 0 [mem 0x0000000000001000-0x000000013e7fffff]
vm-test-run-update-hardware-configuration> target # [    0.002908] On node 0, zone DMA: 1 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.003099] On node 0, zone DMA: 97 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.041415] On node 0, zone Normal: 43 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.041712] On node 0, zone Normal: 6144 pages in unavailable ranges
vm-test-run-update-hardware-configuration> target # [    0.042549] ACPI: PM-Timer IO Port: 0x608
vm-test-run-update-hardware-configuration> target # [    0.042557] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
vm-test-run-update-hardware-configuration> target # [    0.042576] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
vm-test-run-update-hardware-configuration> target # [    0.042578] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
vm-test-run-update-hardware-configuration> target # [    0.042579] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
vm-test-run-update-hardware-configuration> target # [    0.042580] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
vm-test-run-update-hardware-configuration> target # [    0.042581] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
vm-test-run-update-hardware-configuration> target # [    0.042581] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
vm-test-run-update-hardware-configuration> target # [    0.042583] ACPI: Using ACPI (MADT) for SMP configuration information
vm-test-run-update-hardware-configuration> target # [    0.042583] ACPI: HPET id: 0x8086a201 base: 0xfed00000
vm-test-run-update-hardware-configuration> target # [    0.042586] TSC deadline timer available
vm-test-run-update-hardware-configuration> target # [    0.042589] CPU topo: Max. logical packages:   1
vm-test-run-update-hardware-configuration> target # [    0.042590] CPU topo: Max. logical dies:       1
vm-test-run-update-hardware-configuration> target # [    0.042590] CPU topo: Max. dies per package:   1
vm-test-run-update-hardware-configuration> target # [    0.042593] CPU topo: Max. threads per core:   1
vm-test-run-update-hardware-configuration> target # [    0.042593] CPU topo: Num. cores per package:     1
vm-test-run-update-hardware-configuration> target # [    0.042594] CPU topo: Num. threads per package:   1
vm-test-run-update-hardware-configuration> target # [    0.042594] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs
vm-test-run-update-hardware-configuration> target # [    0.042604] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
vm-test-run-update-hardware-configuration> target # [    0.042621] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
vm-test-run-update-hardware-configuration> target # [    0.042622] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
vm-test-run-update-hardware-configuration> target # [    0.042623] PM: hibernation: Registered nosave memory: [mem 0x7ffd5000-0xffffffff]
vm-test-run-update-hardware-configuration> target # [    0.042624] [mem 0xc0000000-0xfed1bfff] available for PCI devices
vm-test-run-update-hardware-configuration> target # [    0.042625] Booting paravirtualized kernel on KVM
vm-test-run-update-hardware-configuration> target # [    0.042627] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
vm-test-run-update-hardware-configuration> target # [    0.046108] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
vm-test-run-update-hardware-configuration> target # [    0.047711] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152
vm-test-run-update-hardware-configuration> target # [    0.047744] kvm-guest: PV spinlocks disabled, single CPU
vm-test-run-update-hardware-configuration> target # [    0.047745] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/77m1783ayn30p981nrzvh0aa30mqs5rc-nixos-system-target-test/init regInfo=/nix/.ro-store/qj8myhcl401ndrn40rwq18ldgzjfzn8p-closure-info/registration console=ttyS0,115200n8 console=tty0
vm-test-run-update-hardware-configuration> target # [    0.047809] Unknown kernel command line parameters "regInfo=/nix/.ro-store/qj8myhcl401ndrn40rwq18ldgzjfzn8p-closure-info/registration", will be passed to user space.
vm-test-run-update-hardware-configuration> target # [    0.048004] random: crng init done
vm-test-run-update-hardware-configuration> target # [    0.048005] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
vm-test-run-update-hardware-configuration> target # [    0.051229] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.052803] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.052824] software IO TLB: area num 1.
vm-test-run-update-hardware-configuration> target # [    0.107032] Fallback order for Node 0: 0
vm-test-run-update-hardware-configuration> target # [    0.107037] Built 1 zonelists, mobility grouping on.  Total pages: 780147
vm-test-run-update-hardware-configuration> target # [    0.107038] Policy zone: Normal
vm-test-run-update-hardware-configuration> target # [    0.108905] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
vm-test-run-update-hardware-configuration> target # [    0.113956] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
vm-test-run-update-hardware-configuration> target # [    0.118933] allocated 6291456 bytes of page_ext
vm-test-run-update-hardware-configuration> target # [    0.127661] ftrace: allocating 48837 entries in 192 pages
vm-test-run-update-hardware-configuration> target # [    0.127662] ftrace: allocated 192 pages with 2 groups
vm-test-run-update-hardware-configuration> target # [    0.128306] Dynamic Preempt: lazy
vm-test-run-update-hardware-configuration> target # [    0.128414] rcu: Preemptible hierarchical RCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.128414] rcu: 	RCU event tracing is enabled.
vm-test-run-update-hardware-configuration> target # [    0.128415] rcu: 	RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.128416] 	Trampoline variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.128417] 	Rude variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.128417] 	Tracing variant of Tasks RCU enabled.
vm-test-run-update-hardware-configuration> target # [    0.128417] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
vm-test-run-update-hardware-configuration> target # [    0.128418] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
vm-test-run-update-hardware-configuration> target # [    0.128458] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.128460] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.128460] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
vm-test-run-update-hardware-configuration> target # [    0.131738] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16
vm-test-run-update-hardware-configuration> target # [    0.131974] rcu: srcu_init: Setting srcu_struct sizes based on contention.
vm-test-run-update-hardware-configuration> target # [    0.131979] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
vm-test-run-update-hardware-configuration> target # [    0.132129] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
vm-test-run-update-hardware-configuration> target # [    0.137510] Console: colour VGA+ 80x25
vm-test-run-update-hardware-configuration> target # [    0.137513] printk: legacy console [tty0] enabled
vm-test-run-update-hardware-configuration> target # [    0.170945] printk: legacy console [ttyS0] enabled
vm-test-run-update-hardware-configuration> target # [    0.319911] ACPI: Core revision 20250807
vm-test-run-update-hardware-configuration> target # [    0.321043] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
vm-test-run-update-hardware-configuration> target # [    0.323072] APIC: Switch to symmetric I/O mode setup
vm-test-run-update-hardware-configuration> target # [    0.324309] x2apic enabled
vm-test-run-update-hardware-configuration> target # [    0.325183] APIC: Switched APIC routing to: physical x2apic
vm-test-run-update-hardware-configuration> target # [    0.327225] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
vm-test-run-update-hardware-configuration> target # [    0.328497] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d6439039, max_idle_ns: 440795360443 ns
vm-test-run-update-hardware-configuration> target # [    0.330663] Calibrating delay loop (skipped) preset value.. 8384.28 BogoMIPS (lpj=4192144)
vm-test-run-update-hardware-configuration> target # [    0.331778] x86/cpu: User Mode Instruction Prevention (UMIP) activated
vm-test-run-update-hardware-configuration> target # [    0.332804] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
vm-test-run-update-hardware-configuration> target # [    0.334662] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
vm-test-run-update-hardware-configuration> target # [    0.335666] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
vm-test-run-update-hardware-configuration> target # [    0.337662] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
vm-test-run-update-hardware-configuration> target # [    0.339662] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
vm-test-run-update-hardware-configuration> target # [    0.340662] Speculative Return Stack Overflow: Mitigation: Safe RET
vm-test-run-update-hardware-configuration> target # [    0.342662] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
vm-test-run-update-hardware-configuration> target # [    0.343671] Spectre V2 : Enabling IBPB for BPF
vm-test-run-update-hardware-configuration> target # [    0.344663] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
vm-test-run-update-hardware-configuration> target # [    0.345663] active return thunk: srso_alias_return_thunk
vm-test-run-update-hardware-configuration> target # [    0.346687] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
vm-test-run-update-hardware-configuration> target # [    0.347662] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
vm-test-run-update-hardware-configuration> target # [    0.348662] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
vm-test-run-update-hardware-configuration> target # [    0.349662] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
vm-test-run-update-hardware-configuration> target # [    0.350662] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
vm-test-run-update-hardware-configuration> target # [    0.351662] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
vm-test-run-update-hardware-configuration> target # [    0.353662] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
vm-test-run-update-hardware-configuration> target # [    0.354662] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
vm-test-run-update-hardware-configuration> target # [    0.355662] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
vm-test-run-update-hardware-configuration> target # [    0.357662] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
vm-test-run-update-hardware-configuration> target # [    0.358662] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
vm-test-run-update-hardware-configuration> target # [    0.360662] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
vm-test-run-update-hardware-configuration> target # [    0.361662] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
vm-test-run-update-hardware-configuration> target # [    0.362662] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
vm-test-run-update-hardware-configuration> target # [    0.363662] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16
vm-test-run-update-hardware-configuration> target # [    0.364662] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]:   24
vm-test-run-update-hardware-configuration> target # [    0.365662] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.
vm-test-run-update-hardware-configuration> target # [    0.394843] Freeing SMP alternatives memory: 48K
vm-test-run-update-hardware-configuration> target # [    0.395664] pid_max: default: 32768 minimum: 301
vm-test-run-update-hardware-configuration> target # [    0.396744] LSM: initializing lsm=capability,landlock,yama,bpf,ima
vm-test-run-update-hardware-configuration> target # [    0.397773] landlock: Up and running.
vm-test-run-update-hardware-configuration> target # [    0.398662] Yama: becoming mindful.
vm-test-run-update-hardware-configuration> target # [    0.399855] LSM support for eBPF active
vm-test-run-update-hardware-configuration> target # [    0.400788] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.401737] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.404286] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2)
vm-test-run-update-hardware-configuration> target # [    0.405101] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
vm-test-run-update-hardware-configuration> target # [    0.405666] ... version:                   2
vm-test-run-update-hardware-configuration> target # [    0.406614] ... bit width:                 48
vm-test-run-update-hardware-configuration> target # [    0.407398] ... generic counters:          6
vm-test-run-update-hardware-configuration> target # [    0.407673] ... generic bitmap:            000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.408663] ... fixed-purpose counters:    0
vm-test-run-update-hardware-configuration> target # [    0.409598] ... fixed-purpose bitmap:      0000000000000000
vm-test-run-update-hardware-configuration> target # [    0.410596] ... value mask:                0000ffffffffffff
vm-test-run-update-hardware-configuration> target # [    0.411602] ... max period:                00007fffffffffff
vm-test-run-update-hardware-configuration> target # [    0.412593] ... global_ctrl mask:          000000000000003f
vm-test-run-update-hardware-configuration> target # [    0.413719] signal: max sigframe size: 3376
vm-test-run-update-hardware-configuration> target # [    0.414741] rcu: Hierarchical SRCU implementation.
vm-test-run-update-hardware-configuration> target # [    0.415667] rcu: 	Max phase no-delay instances is 400.
vm-test-run-update-hardware-configuration> target # [    0.419865] smp: Bringing up secondary CPUs ...
vm-test-run-update-hardware-configuration> target # [    0.420677] smp: Brought up 1 node, 1 CPU
vm-test-run-update-hardware-configuration> target # [    0.421577] smpboot: Total of 1 processors activated (8384.28 BogoMIPS)
vm-test-run-update-hardware-configuration> target # [    0.422786] Memory: 2906384K/3120588K available (18124K kernel code, 2728K rwdata, 13644K rodata, 3656K init, 3632K bss, 201812K reserved, 0K cma-reserved)
vm-test-run-update-hardware-configuration> target # [    0.423882] devtmpfs: initialized
vm-test-run-update-hardware-configuration> target # [    0.424809] x86/mm: Memory block size: 128MB
vm-test-run-update-hardware-configuration> target # [    0.426626] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.427691] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).
vm-test-run-update-hardware-configuration> target # [    0.428736] pinctrl core: initialized pinctrl subsystem
vm-test-run-update-hardware-configuration> target # [    0.429934] PM: RTC time: 13:17:43, date: 2026-10-14
vm-test-run-update-hardware-configuration> target # [    0.432707] NET: Registered PF_NETLINK/PF_ROUTE protocol family
vm-test-run-update-hardware-configuration> target # [    0.434310] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.434692] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.436087] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
vm-test-run-update-hardware-configuration> target # [    0.436675] audit: initializing netlink subsys (disabled)
vm-test-run-update-hardware-configuration> target # [    0.437885] thermal_sys: Registered thermal governor 'fair_share'
vm-test-run-update-hardware-configuration> target # [    0.437887] thermal_sys: Registered thermal governor 'bang_bang'
vm-test-run-update-hardware-configuration> target # [    0.438664] thermal_sys: Registered thermal governor 'step_wise'
vm-test-run-update-hardware-configuration> target # [    0.439668] audit: type=2000 audit(1791983864.279:1): state=initialized audit_enabled=0 res=1
vm-test-run-update-hardware-configuration> target # [    0.441666] thermal_sys: Registered thermal governor 'user_space'
vm-test-run-update-hardware-configuration> target # [    0.441668] thermal_sys: Registered thermal governor 'power_allocator'
vm-test-run-update-hardware-configuration> target # [    0.442682] cpuidle: using governor menu
vm-test-run-update-hardware-configuration> target # [    0.445395] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vm-test-run-update-hardware-configuration> target # [    0.445902] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.446666] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
vm-test-run-update-hardware-configuration> target # [    0.447675] PCI: Using configuration type 1 for base access
vm-test-run-update-hardware-configuration> target # [    0.448845] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
vm-test-run-update-hardware-configuration> target # [    0.455895] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.456664] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
vm-test-run-update-hardware-configuration> target # [    0.461663] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
vm-test-run-update-hardware-configuration> target # [    0.462665] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
vm-test-run-update-hardware-configuration> target # [    0.469977] ACPI: Added _OSI(Module Device)
vm-test-run-update-hardware-configuration> target # [    0.470665] ACPI: Added _OSI(Processor Device)
vm-test-run-update-hardware-configuration> target # [    0.471639] ACPI: Added _OSI(Processor Aggregator Device)
vm-test-run-update-hardware-configuration> target # [    0.476579] ACPI: 1 ACPI AML tables successfully acquired and loaded
vm-test-run-update-hardware-configuration> target # [    0.482631] ACPI: Interpreter enabled
vm-test-run-update-hardware-configuration> target # [    0.483297] ACPI: PM: (supports S0 S3 S4 S5)
vm-test-run-update-hardware-configuration> target # [    0.483664] ACPI: Using IOAPIC for interrupt routing
vm-test-run-update-hardware-configuration> target # [    0.485792] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
vm-test-run-update-hardware-configuration> target # [    0.486663] PCI: Using E820 reservations for host bridge windows
vm-test-run-update-hardware-configuration> target # [    0.487800] ACPI: Enabled 2 GPEs in block 00 to 3F
vm-test-run-update-hardware-configuration> target # [    0.492027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
vm-test-run-update-hardware-configuration> target # [    0.492669] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
vm-test-run-update-hardware-configuration> target # [    0.493725] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]
vm-test-run-update-hardware-configuration> target # [    0.494769] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
vm-test-run-update-hardware-configuration> target # [    0.496111] PCI host bridge to bus 0000:00
vm-test-run-update-hardware-configuration> target # [    0.496668] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.497664] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.498664] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.499664] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.500664] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.501664] pci_bus 0000:00: root bus resource [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.502665] pci_bus 0000:00: root bus resource [bus 00-ff]
vm-test-run-update-hardware-configuration> target # [    0.503763] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.505354] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.508659] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
vm-test-run-update-hardware-configuration> target # [    0.509778] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
vm-test-run-update-hardware-configuration> target # [    0.510749] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
vm-test-run-update-hardware-configuration> target # [    0.511971] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
vm-test-run-update-hardware-configuration> target # [    0.513593] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.515674] pci 0000:00:02.0: BAR 0 [io  0xc180-0xc19f]
vm-test-run-update-hardware-configuration> target # [    0.516674] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
vm-test-run-update-hardware-configuration> target # [    0.517702] pci 0000:00:02.0: BAR 4 [mem 0xe0000000000-0xe0000003fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.518674] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]
vm-test-run-update-hardware-configuration> target # [    0.520812] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.522674] pci 0000:00:03.0: BAR 0 [io  0xc1a0-0xc1bf]
vm-test-run-update-hardware-configuration> target # [    0.523674] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
vm-test-run-update-hardware-configuration> target # [    0.524702] pci 0000:00:03.0: BAR 4 [mem 0xe0000004000-0xe0000007fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.526564] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.529307] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
vm-test-run-update-hardware-configuration> target # [    0.529675] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
vm-test-run-update-hardware-configuration> target # [    0.530703] pci 0000:00:04.0: BAR 4 [mem 0xe0000008000-0xe000000bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.532568] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.535680] pci 0000:00:05.0: BAR 0 [io  0xc080-0xc0ff]
vm-test-run-update-hardware-configuration> target # [    0.536676] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]
vm-test-run-update-hardware-configuration> target # [    0.537707] pci 0000:00:05.0: BAR 4 [mem 0xe000000c000-0xe000000ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.539601] pci 0000:00:06.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.541674] pci 0000:00:06.0: BAR 0 [io  0xc1c0-0xc1df]
vm-test-run-update-hardware-configuration> target # [    0.542674] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]
vm-test-run-update-hardware-configuration> target # [    0.543707] pci 0000:00:06.0: BAR 4 [mem 0xe0000010000-0xe0000013fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.544676] pci 0000:00:06.0: ROM [mem 0xfeb80000-0xfebbffff pref]
vm-test-run-update-hardware-configuration> target # [    0.546608] pci 0000:00:07.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.548684] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]
vm-test-run-update-hardware-configuration> target # [    0.549703] pci 0000:00:07.0: BAR 4 [mem 0xe0000014000-0xe0000017fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.551596] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.553697] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]
vm-test-run-update-hardware-configuration> target # [    0.554702] pci 0000:00:08.0: BAR 4 [mem 0xe0000018000-0xe000001bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.556575] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.558683] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]
vm-test-run-update-hardware-configuration> target # [    0.559703] pci 0000:00:09.0: BAR 4 [mem 0xe000001c000-0xe000001ffff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.562580] pci 0000:00:0a.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.564683] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]
vm-test-run-update-hardware-configuration> target # [    0.565703] pci 0000:00:0a.0: BAR 4 [mem 0xe0000020000-0xe0000023fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.567612] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.569691] pci 0000:00:0b.0: BAR 0 [io  0xc100-0xc13f]
vm-test-run-update-hardware-configuration> target # [    0.570674] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]
vm-test-run-update-hardware-configuration> target # [    0.571704] pci 0000:00:0b.0: BAR 4 [mem 0xe0000024000-0xe0000027fff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.573596] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.576414] pci 0000:00:0c.0: BAR 0 [io  0xc1e0-0xc1ff]
vm-test-run-update-hardware-configuration> target # [    0.577557] pci 0000:00:0c.0: BAR 1 [mem 0xfebdb000-0xfebdbfff]
vm-test-run-update-hardware-configuration> target # [    0.578703] pci 0000:00:0c.0: BAR 4 [mem 0xe0000028000-0xe000002bfff 64bit pref]
vm-test-run-update-hardware-configuration> target # [    0.580620] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.582487] pci 0000:00:1d.0: BAR 4 [io  0xc200-0xc21f]
vm-test-run-update-hardware-configuration> target # [    0.583794] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.585368] pci 0000:00:1d.1: BAR 4 [io  0xc220-0xc23f]
vm-test-run-update-hardware-configuration> target # [    0.585947] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.587373] pci 0000:00:1d.2: BAR 4 [io  0xc240-0xc25f]
vm-test-run-update-hardware-configuration> target # [    0.587987] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.589382] pci 0000:00:1d.7: BAR 0 [mem 0xfebdc000-0xfebdcfff]
vm-test-run-update-hardware-configuration> target # [    0.589993] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.591183] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
vm-test-run-update-hardware-configuration> target # [    0.592031] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.593683] pci 0000:00:1f.2: BAR 4 [io  0xc260-0xc27f]
vm-test-run-update-hardware-configuration> target # [    0.594676] pci 0000:00:1f.2: BAR 5 [mem 0xfebdd000-0xfebddfff]
vm-test-run-update-hardware-configuration> target # [    0.596172] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
vm-test-run-update-hardware-configuration> target # [    0.597374] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
vm-test-run-update-hardware-configuration> target # [    0.602787] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.603805] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.604796] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.605792] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.606796] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.607810] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
vm-test-run-update-hardware-configuration> target # [    0.608795] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.609810] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
vm-test-run-update-hardware-configuration> target # [    0.610719] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.611679] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.612683] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.613693] ACPI: PCI: Interrupt link GSID configured for IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.614724] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
vm-test-run-update-hardware-configuration> target # [    0.615680] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
vm-test-run-update-hardware-configuration> target # [    0.616678] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
vm-test-run-update-hardware-configuration> target # [    0.617679] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
vm-test-run-update-hardware-configuration> target # [    0.619556] iommu: Default domain type: Translated
vm-test-run-update-hardware-configuration> target # [    0.620474] iommu: DMA domain TLB invalidation policy: lazy mode
vm-test-run-update-hardware-configuration> target # [    0.621913] ACPI: bus type USB registered
vm-test-run-update-hardware-configuration> target # [    0.622743] usbcore: registered new interface driver usbfs
vm-test-run-update-hardware-configuration> target # [    0.623682] usbcore: registered new interface driver hub
vm-test-run-update-hardware-configuration> target # [    0.624677] usbcore: registered new device driver usb
vm-test-run-update-hardware-configuration> target # [    0.626392] NetLabel: Initializing
vm-test-run-update-hardware-configuration> target # [    0.626668] NetLabel:  domain hash size = 128
vm-test-run-update-hardware-configuration> target # [    0.627663] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
vm-test-run-update-hardware-configuration> target # [    0.628715] NetLabel:  unlabeled traffic allowed by default
vm-test-run-update-hardware-configuration> target # [    0.629677] PCI: Using ACPI for IRQ routing
vm-test-run-update-hardware-configuration> target # [    0.709974] pci 0000:00:01.0: vgaarb: setting as boot VGA device
vm-test-run-update-hardware-configuration> target # [    0.710659] pci 0000:00:01.0: vgaarb: bridge control possible
vm-test-run-update-hardware-configuration> target # [    0.710659] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vm-test-run-update-hardware-configuration> target # [    0.710669] vgaarb: loaded
vm-test-run-update-hardware-configuration> target # [    0.711516] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
vm-test-run-update-hardware-configuration> target # [    0.712495] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
vm-test-run-update-hardware-configuration> target # [    0.716750] clocksource: Switched to clocksource kvm-clock
vm-test-run-update-hardware-configuration> target # [    0.718568] VFS: Disk quotas dquot_6.6.0
vm-test-run-update-hardware-configuration> target # [    0.720923] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
vm-test-run-update-hardware-configuration> target # [    0.722568] pnp: PnP ACPI init
vm-test-run-update-hardware-configuration> target # [    0.723464] ACPI: IRQ 4 override to edge(!), high(!)
vm-test-run-update-hardware-configuration> target # [    0.724615] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
vm-test-run-update-hardware-configuration> target # [    0.726658] pnp: PnP ACPI: found 5 devices
vm-test-run-update-hardware-configuration> target # [    0.733929] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
vm-test-run-update-hardware-configuration> target # [    0.735854] clocksource: Switched to clocksource acpi_pm
vm-test-run-update-hardware-configuration> target # [    0.737156] NET: Registered PF_INET protocol family
vm-test-run-update-hardware-configuration> target # [    0.738806] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.752524] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.754560] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.756341] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.758893] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.760521] TCP: Hash tables configured (established 32768 bind 32768)
vm-test-run-update-hardware-configuration> target # [    0.762031] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.763747] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.765157] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
vm-test-run-update-hardware-configuration> target # [    0.766861] NET: Registered PF_UNIX/PF_LOCAL protocol family
vm-test-run-update-hardware-configuration> target # [    0.768114] NET: Registered PF_XDP protocol family
vm-test-run-update-hardware-configuration> target # [    0.769194] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
vm-test-run-update-hardware-configuration> target # [    0.770508] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
vm-test-run-update-hardware-configuration> target # [    0.771857] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
vm-test-run-update-hardware-configuration> target # [    0.773281] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
vm-test-run-update-hardware-configuration> target # [    0.774794] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
vm-test-run-update-hardware-configuration> target # [    0.776310] pci_bus 0000:00: resource 9 [mem 0xe0000000000-0xe07ffffffff window]
vm-test-run-update-hardware-configuration> target # [    0.778447] ACPI: \_SB_.GSIA: Enabled at IRQ 16
vm-test-run-update-hardware-configuration> target # [    0.780512] ACPI: \_SB_.GSIB: Enabled at IRQ 17
vm-test-run-update-hardware-configuration> target # [    0.782576] ACPI: \_SB_.GSIC: Enabled at IRQ 18
vm-test-run-update-hardware-configuration> target # [    0.784544] ACPI: \_SB_.GSID: Enabled at IRQ 19
vm-test-run-update-hardware-configuration> target # [    0.786307] PCI: CLS 0 bytes, default 64
vm-test-run-update-hardware-configuration> target # [    0.787348] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
vm-test-run-update-hardware-configuration> target # [    0.788831] Trying to unpack rootfs image as initramfs...
vm-test-run-update-hardware-configuration> target # [    0.794720] software IO TLB: mapped [mem 0x000000007a2e3000-0x000000007e2e3000] (64MB)
vm-test-run-update-hardware-configuration> target # [    0.796476] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d6439039, max_idle_ns: 440795360443 ns
vm-test-run-update-hardware-configuration> target # [    0.832025] Initialise system trusted keyrings
vm-test-run-update-hardware-configuration> target # [    0.834763] workingset: timestamp_bits=40 max_order=20 bucket_order=0
vm-test-run-update-hardware-configuration> target # [    0.851117] Key type asymmetric registered
vm-test-run-update-hardware-configuration> target # [    0.855721] Asymmetric key parser 'x509' registered
vm-test-run-update-hardware-configuration> target # [    0.856826] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
vm-test-run-update-hardware-configuration> target # [    0.860836] io scheduler mq-deadline registered
vm-test-run-update-hardware-configuration> target # [    0.861827] io scheduler kyber registered
vm-test-run-update-hardware-configuration> target # [    0.865174] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
vm-test-run-update-hardware-configuration> target # [    0.868720] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
vm-test-run-update-hardware-configuration> target # [    0.874389] Linux agpgart interface v0.103
vm-test-run-update-hardware-configuration> target # [    0.875416] ACPI: bus type drm_connector registered
vm-test-run-update-hardware-configuration> target # [    0.878133] usbcore: registered new interface driver usbserial_generic
vm-test-run-update-hardware-configuration> target # [    0.879611] usbserial: USB Serial support registered for generic
vm-test-run-update-hardware-configuration> target # [    0.884724] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.
vm-test-run-update-hardware-configuration> target # [    0.884724] Please enable it if your BIOS has the CPPC option.
vm-test-run-update-hardware-configuration> target # [    0.887681] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
vm-test-run-update-hardware-configuration> target # [    0.891907] drop_monitor: Initializing network drop monitor service
vm-test-run-update-hardware-configuration> target # [    0.893488] NET: Registered PF_INET6 protocol family
vm-test-run-update-hardware-configuration> target # [    0.899803] Segment Routing with IPv6
vm-test-run-update-hardware-configuration> target # [    0.900719] In-situ OAM (IOAM) with IPv6
vm-test-run-update-hardware-configuration> target # [    0.901976] IPI shorthand broadcast: enabled
vm-test-run-update-hardware-configuration> target # [    0.909746] sched_clock: Marking stable (716021984, 193681063)->(1015174626, -105471579)
vm-test-run-update-hardware-configuration> target # [    0.914895] registered taskstats version 1
vm-test-run-update-hardware-configuration> target # [    0.916053] Loading compiled-in X.509 certificates
vm-test-run-update-hardware-configuration> target # [    0.932363] Demotion targets for Node 0: null
vm-test-run-update-hardware-configuration> target # [    0.935762] Key type .fscrypt registered
vm-test-run-update-hardware-configuration> target # [    0.936716] Key type fscrypt-provisioning registered
vm-test-run-update-hardware-configuration> target # [    0.939811] ima: No TPM chip found, activating TPM-bypass!
vm-test-run-update-hardware-configuration> target # [    0.941055] ima: Allocated hash algorithm: sha1
vm-test-run-update-hardware-configuration> target # [    0.943738] ima: No architecture policies found
vm-test-run-update-hardware-configuration> target # [    0.945715] PM:   Magic number: 14:175:281
vm-test-run-update-hardware-configuration> target # [    0.946667] tty tty18: hash matches
vm-test-run-update-hardware-configuration> target # [    0.950272] RAS: Correctable Errors collector initialized.
vm-test-run-update-hardware-configuration> target # [    0.958404] clk: Disabling unused clocks
vm-test-run-update-hardware-configuration> target # [    0.959345] PM: genpd: Disabling unused power domains
vm-test-run-update-hardware-configuration> target # [    1.075220] Freeing initrd memory: 29620K
vm-test-run-update-hardware-configuration> target # [    1.078077] Freeing unused decrypted memory: 2028K
vm-test-run-update-hardware-configuration> target # [    1.080614] Freeing unused kernel image (initmem) memory: 3656K
vm-test-run-update-hardware-configuration> target # [    1.081946] Write protecting the kernel read-only data: 32768k
vm-test-run-update-hardware-configuration> target # [    1.083419] Freeing unused kernel image (text/rodata gap) memory: 304K
vm-test-run-update-hardware-configuration> target # [    1.085067] Freeing unused kernel image (rodata/data gap) memory: 692K
vm-test-run-update-hardware-configuration> target # [    1.118244] x86/mm: Checked W+X mappings: passed, no W+X pages found.
vm-test-run-update-hardware-configuration> target # [    1.119646] Run /init as init process
vm-test-run-update-hardware-configuration> target # [    1.129423] systemd[1]: Inserted module 'autofs4'
vm-test-run-update-hardware-configuration> target # [    1.144935] fuse: init (API version 7.45)
vm-test-run-update-hardware-configuration> target # [    1.150949] ACPI: \_SB_.GSIG: Enabled at IRQ 22
vm-test-run-update-hardware-configuration> target # [    1.153582] ACPI: \_SB_.GSIH: Enabled at IRQ 23
vm-test-run-update-hardware-configuration> target # [    1.156923] ACPI: \_SB_.GSIE: Enabled at IRQ 20
vm-test-run-update-hardware-configuration> target # [    1.159267] ACPI: \_SB_.GSIF: Enabled at IRQ 21
vm-test-run-update-hardware-configuration> target # [    1.166134] virtiofs virtio6: discovered new tag: nix-store
vm-test-run-update-hardware-configuration> target # [    1.168222] virtiofs virtio6: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.175252] virtiofs virtio7: discovered new tag: shared
vm-test-run-update-hardware-configuration> target # [    1.185612] virtiofs virtio7: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.189545] virtiofs virtio8: discovered new tag: xchg
vm-test-run-update-hardware-configuration> target # [    1.191751] virtiofs virtio8: virtio_fs_setup_dax: No cache capability
vm-test-run-update-hardware-configuration> target # [    1.212467] systemd[1]: Successfully made /usr/ read-only.
vm-test-run-update-hardware-configuration> target # [    1.548452] systemd[1]: systemd 261.3 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    1.554599] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    1.555728] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    1.556839] systemd[1]: Running in initrd.
vm-test-run-update-hardware-configuration> target # [    1.557981] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    1.559826] systemd[1]: Hostname set to <target>.
vm-test-run-update-hardware-configuration> target # [    1.616695] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    1.650069] systemd[1]: Queued start job for default target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    1.653985] systemd[1]: Created slice Slice /system/modprobe.
vm-test-run-update-hardware-configuration> target # [    1.655700] systemd[1]: Created slice Slice /system/systemd-makefs.
vm-test-run-update-hardware-configuration> target # [    1.657160] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    1.658927] systemd[1]: Expecting device /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    1.660094] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    1.661222] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    1.662400] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    1.663448] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    1.664707] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    1.666259] systemd[1]: Listening on Journal Socket (/dev/log).
vm-test-run-update-hardware-configuration> target # [    1.667773] systemd[1]: Listening on Journal Sockets.
vm-test-run-update-hardware-configuration> target # [    1.669050] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    1.670367] systemd[1]: Listening on udev Kernel Socket.
vm-test-run-update-hardware-configuration> target # [    1.671581] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    1.673630] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    1.678344] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    1.686047] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    1.694748] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    1.698044] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    1.704272] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    1.723786] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    1.730374] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    1.734192] systemd-journald[65]: Collecting audit messages is disabled.
vm-test-run-update-hardware-configuration> target # [    1.739284] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    1.747285] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config
vm-test-run-update-hardware-configuration> target # [    1.753788] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
vm-test-run-update-hardware-configuration> target # [    1.761742] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    1.765830] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
vm-test-run-update-hardware-configuration> target # [    1.798314] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    1.805806] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    1.813858] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    1.826908] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    1.865780] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    1.871764] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    1.876016] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    1.881756] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    1.887860] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    1.713244] systemd-modules-load[66]: Inserted module 'dm_mod'
vm-test-run-update-hardware-configuration> target # [    1.714843] systemd-modules-load[66]: Inserted module 'virtio_balloon'
vm-test-run-update-hardware-configuration> target # [    1.909723] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    1.717431] systemd-modules-load[66]: Inserted module 'virtio_gpu'
vm-test-run-update-hardware-configuration> target # [    1.733662] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    1.756316] systemd-udevd[73]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    1.762485] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    1.785084] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    1.801770] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    1.802909] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    1.804163] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    2.202260] virtio_blk virtio2: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.236044] virtio_blk virtio2: [vda] 16777216 512-byte logical blocks (8.59 GB/8.00 GiB)
vm-test-run-update-hardware-configuration> target # [    2.250813] ehci-pci 0000:00:1d.7: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.251886] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
vm-test-run-update-hardware-configuration> target # [    2.254108] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdc000
vm-test-run-update-hardware-configuration> target # [    2.262149] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
vm-test-run-update-hardware-configuration> target # [    2.263836] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.265224] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.270425] usb usb1: Product: EHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.271417] usb usb1: Manufacturer: Linux 6.18.55 ehci_hcd
vm-test-run-update-hardware-configuration> target # [    2.272870] usb usb1: SerialNumber: 0000:00:1d.7
vm-test-run-update-hardware-configuration> target # [    2.283349] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
vm-test-run-update-hardware-configuration> target # [    2.284871] hub 1-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.286044] hub 1-0:1.0: 6 ports detected
vm-test-run-update-hardware-configuration> target # [    2.292265] uhci_hcd 0000:00:1d.0: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.293202] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
vm-test-run-update-hardware-configuration> target # [    2.295185] virtio_blk virtio3: 1/0/0 default/read/poll queues
vm-test-run-update-hardware-configuration> target # [    2.300113] serio: i8042 KBD port at 0x60,0x64 irq 1
vm-test-run-update-hardware-configuration> target # [    2.301047] serio: i8042 AUX port at 0x60,0x64 irq 12
vm-test-run-update-hardware-configuration> target # [    2.303052] virtio_blk virtio3: [vdb] 1048576 512-byte logical blocks (537 MB/512 MiB)
vm-test-run-update-hardware-configuration> target # [    2.310955] uhci_hcd 0000:00:1d.0: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.321026] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200
vm-test-run-update-hardware-configuration> target # [    2.329292] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.342737] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.356142] usb usb2: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.175395] (udev-worker)[88]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.370941] usb usb2: Manufacturer: Linux 6.18.55 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.371948] usb usb2: SerialNumber: 0000:00:1d.0
vm-test-run-update-hardware-configuration> target # [    2.183062] (udev-worker)[95]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    2.386141] SCSI subsystem initialized
vm-test-run-update-hardware-configuration> target # [    2.199518] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    2.400850] hub 2-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.405329] hub 2-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.237491] systemd-vconsole-setup[106]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [    2.434921] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
vm-test-run-update-hardware-configuration> target # [    2.243951] systemd[1]: Found device /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.438682] uhci_hcd 0000:00:1d.1: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.439542] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
vm-test-run-update-hardware-configuration> target # [    2.249101] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    2.250189] systemd[1]: Reached target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    2.252829] systemd[1]: Starting Make File System on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.465755] uhci_hcd 0000:00:1d.1: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.274479] systemd-makefs[110]: Formatting /dev/vdb as ext4
vm-test-run-update-hardware-configuration> target # [    2.471774] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220
vm-test-run-update-hardware-configuration> target # [    2.476163] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.478646] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.481670] usb usb3: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.482520] usb usb3: Manufacturer: Linux 6.18.55 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.485935] usb usb3: SerialNumber: 0000:00:1d.1
vm-test-run-update-hardware-configuration> target # [    2.296160] systemd-makefs[110]: /dev/vdb successfully formatted as ext4 (label "vdb", uuid dd6be2a2-69c9-44a1-95ed-12570d53438f)
vm-test-run-update-hardware-configuration> target # [    2.300165] systemd[1]: Finished Make File System on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.494933] hub 3-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.303859] systemd[1]: Starting File System Check on /dev/vdb...
vm-test-run-update-hardware-configuration> target # [    2.503146] hub 3-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.508462] uhci_hcd 0000:00:1d.2: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.509356] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
vm-test-run-update-hardware-configuration> target # [    2.526670] usb 1-1: new high-speed USB device number 2 using ehci-pci
vm-test-run-update-hardware-configuration> target # [    2.532826] uhci_hcd 0000:00:1d.2: detected 2 ports
vm-test-run-update-hardware-configuration> target # [    2.340738] systemd-fsck[118]: vdb: clean, 12/32768 files, 6385/131072 blocks
vm-test-run-update-hardware-configuration> target # [    2.536784] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240
vm-test-run-update-hardware-configuration> target # [    2.346507] systemd[1]: Finished File System Check on /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    2.543387] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
vm-test-run-update-hardware-configuration> target # [    2.549460] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
vm-test-run-update-hardware-configuration> target # [    2.552704] usb usb4: Product: UHCI Host Controller
vm-test-run-update-hardware-configuration> target # [    2.553575] usb usb4: Manufacturer: Linux 6.18.55 uhci_hcd
vm-test-run-update-hardware-configuration> target # [    2.555145] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
vm-test-run-update-hardware-configuration> target # [    2.556496] usb usb4: SerialNumber: 0000:00:1d.2
vm-test-run-update-hardware-configuration> target # [    2.558046] hub 4-0:1.0: USB hub found
vm-test-run-update-hardware-configuration> target # [    2.562774] hub 4-0:1.0: 2 ports detected
vm-test-run-update-hardware-configuration> target # [    2.563474] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
vm-test-run-update-hardware-configuration> target # [    2.565049] ahci 0000:00:1f.2: flags: 64bit ncq only
vm-test-run-update-hardware-configuration> target # [    2.575584] scsi host0: ahci
vm-test-run-update-hardware-configuration> target # [    2.577011] scsi host1: ahci
vm-test-run-update-hardware-configuration> target # [    2.578789] scsi host2: ahci
vm-test-run-update-hardware-configuration> target # [    2.580643] scsi host3: ahci
vm-test-run-update-hardware-configuration> target # [    2.586675] scsi host4: ahci
vm-test-run-update-hardware-configuration> target # [    2.588846] scsi host5: ahci
vm-test-run-update-hardware-configuration> target # [    2.589495] ata1: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd100 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.598017] ata2: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd180 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.602149] ata3: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd200 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.603594] ata4: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd280 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.605038] ata5: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd300 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.606436] ata6: SATA max UDMA/133 abar m4096@0xfebdd000 port 0xfebdd380 irq 49 lpm-pol 1
vm-test-run-update-hardware-configuration> target # [    2.657704] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
vm-test-run-update-hardware-configuration> target # [    2.659122] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
vm-test-run-update-hardware-configuration> target # [    2.660660] usb 1-1: Product: QEMU USB Tablet
vm-test-run-update-hardware-configuration> target # [    2.661405] usb 1-1: Manufacturer: QEMU
vm-test-run-update-hardware-configuration> target # [    2.662417] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1
vm-test-run-update-hardware-configuration> target # [    2.677497] hid: raw HID events driver (C) Jiri Kosina
vm-test-run-update-hardware-configuration> target # [    2.522174] systemd[1]: Mounting /sysroot...
vm-test-run-update-hardware-configuration> target # [    2.915359] ata6: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.916521] ata4: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.919842] ata2: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.921150] ata5: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.925822] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.928795] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
vm-test-run-update-hardware-configuration> target # [    2.932191] ata3.00: applying bridge limits
vm-test-run-update-hardware-configuration> target # [    2.933350] ata1: SATA link down (SStatus 0 SControl 300)
vm-test-run-update-hardware-configuration> target # [    2.934525] ata3.00: configured for UDMA/100
vm-test-run-update-hardware-configuration> target # [    2.935933] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
vm-test-run-update-hardware-configuration> target # [    2.988164] usbcore: registered new interface driver usbhid
vm-test-run-update-hardware-configuration> target # [    2.989123] usbhid: USB HID core driver
vm-test-run-update-hardware-configuration> target # [    3.017778] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2
vm-test-run-update-hardware-configuration> target # [    3.023940] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
vm-test-run-update-hardware-configuration> target # [    3.038126] EXT4-fs (vdb): mounted filesystem dd6be2a2-69c9-44a1-95ed-12570d53438f r/w with ordered data mode. Quota mode: none.
vm-test-run-update-hardware-configuration> target # [    3.040849] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
vm-test-run-update-hardware-configuration> target # [    2.850181] systemd[1]: Mounted /sysroot.
vm-test-run-update-hardware-configuration> target # [    2.852837] systemd[1]: Reached target Initrd Root File System.
vm-test-run-update-hardware-configuration> target # [    2.856765] systemd[1]: Starting Mountpoints Configured in the Real Root...
vm-test-run-update-hardware-configuration> target # [    3.055634] cdrom: Uniform CD-ROM driver Revision: 3.20
vm-test-run-update-hardware-configuration> target # [    2.874525] systemd-sysroot-fstab-check[148]: /sysroot should be mounted in the initrd, will request daemon-reload.
vm-test-run-update-hardware-configuration> target # [    2.879113] systemd[1]: Reload requested from client PID 148 ('systemd-sysroot') (unit initrd-parse-etc.service)...
vm-test-run-update-hardware-configuration> target # [    2.881653] systemd[1]: Reloading...
vm-test-run-update-hardware-configuration> target # [    2.954423] systemd[1]: Reloading finished in 74 ms.
vm-test-run-update-hardware-configuration> target # [    2.967664] systemd-sysroot-fstab-check[148]: Requesting initrd-fs.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    2.973283] systemd-sysroot-fstab-check[148]: Requesting swap.target/start/replace...
vm-test-run-update-hardware-configuration> target # [    2.977989] systemd[1]: initrd-parse-etc.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    2.981090] systemd[1]: Finished Mountpoints Configured in the Real Root.
vm-test-run-update-hardware-configuration> target # [    2.982349] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.
vm-test-run-update-hardware-configuration> target # [    3.523091] systemd[1]: Mounting /sysroot/nix/.ro-store...
vm-test-run-update-hardware-configuration> target # [    3.525904] systemd[1]: Mounting /sysroot/nix/.rw-store...
vm-test-run-update-hardware-configuration> target # [    3.530662] systemd[1]: Mounting /sysroot/run...
vm-test-run-update-hardware-configuration> target # [    3.531783] systemd[1]: Mounting /sysroot/tmp/shared...
vm-test-run-update-hardware-configuration> target # [    3.538256] systemd[1]: Mounting /sysroot/tmp/xchg...
vm-test-run-update-hardware-configuration> target # [    3.560073] systemd[1]: Mounted /sysroot/nix/.ro-store.
vm-test-run-update-hardware-configuration> target # [    3.563953] systemd[1]: Mounted /sysroot/nix/.rw-store.
vm-test-run-update-hardware-configuration> target # [    3.567086] systemd[1]: Mounted /sysroot/run.
vm-test-run-update-hardware-configuration> target # [    3.567910] systemd[1]: Mounted /sysroot/tmp/shared.
vm-test-run-update-hardware-configuration> target # [    3.569699] systemd[1]: Mounted /sysroot/tmp/xchg.
vm-test-run-update-hardware-configuration> target # [    3.573637] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    3.582369] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    3.584546] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    4.522757] systemd[1]: Mounting /sysroot/nix/store...
vm-test-run-update-hardware-configuration> target # [    4.541053] systemd[1]: Mounted /sysroot/nix/store.
vm-test-run-update-hardware-configuration> target # [    4.542589] systemd[1]: Reached target Initrd File Systems.
vm-test-run-update-hardware-configuration> target # [    4.544604] systemd[1]: Starting Find NixOS closure...
vm-test-run-update-hardware-configuration> target # [    4.547577] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...
vm-test-run-update-hardware-configuration> target # [    4.564174] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    4.566573] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.572845] systemd[1]: Finished Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    4.574453] systemd[1]: Reached target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    4.576415] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...
vm-test-run-update-hardware-configuration> target # [    4.588060] systemd[1]: Stopped target Initrd Default Target.
vm-test-run-update-hardware-configuration> target # [    4.589417] systemd[1]: Stopped target Basic System.
vm-test-run-update-hardware-configuration> target # [    4.591225] systemd[1]: Stopped target Initrd Root Device.
vm-test-run-update-hardware-configuration> target # [    4.592242] systemd[1]: Stopped target Path Units.
vm-test-run-update-hardware-configuration> target # [    4.593170] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.594537] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    4.596375] systemd[1]: Stopped target Slice Units.
vm-test-run-update-hardware-configuration> target # [    4.597637] systemd[1]: Stopped target Socket Units.
vm-test-run-update-hardware-configuration> target # [    4.599161] systemd[1]: Stopped target System Initialization.
vm-test-run-update-hardware-configuration> target # [    4.600302] systemd[1]: Stopped target Swaps.
vm-test-run-update-hardware-configuration> target # [    4.602048] systemd[1]: Stopped target Timer Units.
vm-test-run-update-hardware-configuration> target # [    4.602945] systemd[1]: dbus.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.604050] systemd[1]: Closed D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    4.605226] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.607188] systemd[1]: Stopped Find NixOS closure.
vm-test-run-update-hardware-configuration> target # [    4.608324] systemd[1]: Starting rw-sysroot-nix-store.service...
vm-test-run-update-hardware-configuration> target # [    4.609598] systemd[1]: systemd-sysctl.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.611211] systemd[1]: Stopped Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    4.613173] systemd[1]: systemd-modules-load.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.614613] systemd[1]: Stopped Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    4.616195] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.617732] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.
vm-test-run-update-hardware-configuration> target # [    4.619505] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.621451] systemd[1]: Stopped Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    4.623250] systemd[1]: Stopped target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    4.624765] systemd[1]: Stopped target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    4.626168] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.628033] systemd[1]: Stopped Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    4.630178] systemd[1]: Stopping Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    4.631553] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.635158] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    4.642781] systemd[1]: initrd-cleanup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.648198] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.
vm-test-run-update-hardware-configuration> target # [    4.653238] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.655753] systemd[1]: Finished rw-sysroot-nix-store.service.
vm-test-run-update-hardware-configuration> target # [    4.658458] systemd[1]: systemd-udevd.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.660652] systemd[1]: Stopped Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    4.663255] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.665201] systemd[1]: Closed udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    4.666656] systemd[1]: Starting Cleanup udev Database...
vm-test-run-update-hardware-configuration> target # [    4.668166] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.669545] systemd[1]: Stopped Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    4.671174] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.672598] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    4.674149] systemd[1]: kmod-static-nodes.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.676145] systemd[1]: Stopped Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    4.692323] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    4.694702] systemd[1]: Finished Cleanup udev Database.
vm-test-run-update-hardware-configuration> target # [    4.696568] systemd[1]: Reached target Switch Root.
vm-test-run-update-hardware-configuration> target # [    4.698748] systemd[1]: Starting NixOS Activation...
vm-test-run-update-hardware-configuration> target # [    4.752877] initrd-nixos-activation-start[201]: booting system configuration /nix/store/77m1783ayn30p981nrzvh0aa30mqs5rc-nixos-system-target-test
vm-test-run-update-hardware-configuration> target # [    5.439967] initrd-nixos-activation-start[201]: running activation script...
vm-test-run-update-hardware-configuration> target # [    5.600458] initrd-nixos-activation-start[224]: setting up /etc...
vm-test-run-update-hardware-configuration> target # [    5.685780] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    5.687699] systemd[1]: Finished NixOS Activation.
vm-test-run-update-hardware-configuration> target # [    5.689694] systemd[1]: Starting Switch Root...
vm-test-run-update-hardware-configuration> target # [    5.699445] systemd[1]: Switching root.
vm-test-run-update-hardware-configuration> target # [    6.016739] systemd-journald[65]: Received SIGTERM from PID 1 (systemd).
vm-test-run-update-hardware-configuration> target # [    6.283244] NET: Registered PF_VSOCK protocol family
vm-test-run-update-hardware-configuration> target # [    6.653414] systemd[1]: systemd 261.3 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)
vm-test-run-update-hardware-configuration> target # [    6.657971] systemd[1]: Detected virtualization kvm.
vm-test-run-update-hardware-configuration> target # [    6.658890] systemd[1]: Detected architecture x86-64.
vm-test-run-update-hardware-configuration> target # [    6.659850] systemd[1]: Detected first boot.
vm-test-run-update-hardware-configuration> target # [    6.661547] systemd[1]: Initializing machine ID from random generator.
vm-test-run-update-hardware-configuration> target # [    6.728082] systemd[1]: bpf-restrict-fs: LSM BPF program attached
vm-test-run-update-hardware-configuration> target # [    6.783201] systemd[1]: Applying preset policy.
vm-test-run-update-hardware-configuration> target # [    6.940780] systemd[1]: Populated /etc with preset unit settings.
vm-test-run-update-hardware-configuration> target # [    7.121267] systemd[1]: initrd-switch-root.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    7.123075] systemd[1]: Stopped initrd-switch-root.service.
vm-test-run-update-hardware-configuration> target # [    7.126072] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
vm-test-run-update-hardware-configuration> target # [    7.128330] systemd[1]: Created slice Slice /system/getty.
vm-test-run-update-hardware-configuration> target # [    7.129988] systemd[1]: Created slice User and Session Slice.
vm-test-run-update-hardware-configuration> target # [    7.131177] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
vm-test-run-update-hardware-configuration> target # [    7.132716] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
vm-test-run-update-hardware-configuration> target # [    7.134136] systemd[1]: Expecting device /dev/hvc0...
vm-test-run-update-hardware-configuration> target # [    7.135093] systemd[1]: Expecting device /dev/ttyS0...
vm-test-run-update-hardware-configuration> target # [    7.136094] systemd[1]: Reached target Local Encrypted Volumes.
vm-test-run-update-hardware-configuration> target # [    7.137099] systemd[1]: Stopped target initrd-fs.target.
vm-test-run-update-hardware-configuration> target # [    7.138116] systemd[1]: Stopped target initrd-root-fs.target.
vm-test-run-update-hardware-configuration> target # [    7.139126] systemd[1]: Stopped target initrd-switch-root.target.
vm-test-run-update-hardware-configuration> target # [    7.140178] systemd[1]: Reached target Virtual Machines and Containers.
vm-test-run-update-hardware-configuration> target # [    7.141404] systemd[1]: Reached target Path Units.
vm-test-run-update-hardware-configuration> target # [    7.142283] systemd[1]: Reached target Remote File Systems.
vm-test-run-update-hardware-configuration> target # [    7.143364] systemd[1]: Reached target Slice Units.
vm-test-run-update-hardware-configuration> target # [    7.144245] systemd[1]: Reached target Swaps.
vm-test-run-update-hardware-configuration> target # [    7.146326] systemd[1]: Listening on Query the User Interactively for a Password.
vm-test-run-update-hardware-configuration> target # [    7.148843] systemd[1]: Listening on Process Core Dump Socket.
vm-test-run-update-hardware-configuration> target # [    7.150872] systemd[1]: Listening on Credential Encryption/Decryption.
vm-test-run-update-hardware-configuration> target # [    7.152922] systemd[1]: Listening on Factory Reset Management.
vm-test-run-update-hardware-configuration> target # [    7.154085] systemd[1]: Listening on Hostname Service Socket.
vm-test-run-update-hardware-configuration> target # [    7.157040] systemd[1]: Starting Journal Log Access Socket...
vm-test-run-update-hardware-configuration> target # [    7.159544] systemd[1]: Listening on Journal Audit Socket.
vm-test-run-update-hardware-configuration> target # [    7.161765] systemd[1]: Listening on Console Output Muting Service Socket.
vm-test-run-update-hardware-configuration> target # [    7.163066] systemd[1]: Listening on Network Management Metrics Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    7.164637] systemd[1]: Listening on Network Management Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    7.165902] systemd[1]: Listening on Network Management Netlink Socket.
vm-test-run-update-hardware-configuration> target # [    7.167216] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
vm-test-run-update-hardware-configuration> target # [    7.168641] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    7.170310] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
vm-test-run-update-hardware-configuration> target # [    7.174275] systemd[1]: Listening on Disk Repartitioning Service Socket.
vm-test-run-update-hardware-configuration> target # [    7.175539] systemd[1]: Listening on Resolve Monitor Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    7.176765] systemd[1]: Listening on Resolve Service Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    7.177947] systemd[1]: Listening on udev Control Socket.
vm-test-run-update-hardware-configuration> target # [    7.179010] systemd[1]: Listening on udev Varlink Socket.
vm-test-run-update-hardware-configuration> target # [    7.181394] systemd[1]: Mounting Huge Pages File System...
vm-test-run-update-hardware-configuration> target # [    7.185499] systemd[1]: Mounting POSIX Message Queue File System...
vm-test-run-update-hardware-configuration> target # [    7.193116] systemd[1]: Mounting Kernel Debug File System...
vm-test-run-update-hardware-configuration> target # [    7.201845] systemd[1]: Mounting Kernel Trace File System...
vm-test-run-update-hardware-configuration> target # [    7.210093] systemd[1]: Starting Create List of Static Device Nodes...
vm-test-run-update-hardware-configuration> target # [    7.224668] systemd[1]: Starting Load Kernel Module configfs...
vm-test-run-update-hardware-configuration> target # [    7.236216] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
vm-test-run-update-hardware-configuration> target # [    7.247554] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore
vm-test-run-update-hardware-configuration> target # [    7.250142] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [    7.254317] systemd[1]: Mounting FUSE Control File System...
vm-test-run-update-hardware-configuration> target # [    7.257760] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
vm-test-run-update-hardware-configuration> target # [    7.267014] systemd[1]: Starting Journal Service...
vm-test-run-update-hardware-configuration> target # [    7.275372] systemd[1]: Starting Load Kernel Modules...
vm-test-run-update-hardware-configuration> target # [    7.289550] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...
vm-test-run-update-hardware-configuration> target # [    7.304927] systemd[1]: Starting Remount Root and Kernel File Systems...
vm-test-run-update-hardware-configuration> target # [    7.306862] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    7.318512] systemd[1]: Starting Coldplug All udev Devices...
vm-test-run-update-hardware-configuration> target # [    7.319834] systemd-journald[294]: Collecting audit messages is enabled.
vm-test-run-update-hardware-configuration> target # [    7.329050] systemd[1]: Listening on Journal Log Access Socket.
vm-test-run-update-hardware-configuration> target # [    7.334710] systemd[1]: Mounted Huge Pages File System.
vm-test-run-update-hardware-configuration> target # [    7.336662] systemd[1]: Mounted POSIX Message Queue File System.
vm-test-run-update-hardware-configuration> target # [    7.341693] systemd[1]: Mounted Kernel Debug File System.
vm-test-run-update-hardware-configuration> target # [    7.354026] systemd[1]: Mounted Kernel Trace File System.
vm-test-run-update-hardware-configuration> target # [    7.356717] loop: module loaded
vm-test-run-update-hardware-configuration> target # [    7.366506] systemd[1]: Finished Create List of Static Device Nodes.
vm-test-run-update-hardware-configuration> target # [    7.371610] systemd[1]: Started Journal Service.
vm-test-run-update-hardware-configuration> target # [    7.179153] systemd[1]: Queued start job for default target Multi-User System.
vm-test-run-update-hardware-configuration> target # [    7.180991] systemd[1]: Unnecessary job was removed for /dev/vdb.
vm-test-run-update-hardware-configuration> target # [    7.183715] systemd[1]: systemd-journald.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    7.186743] systemd-modules-load[295]: Inserted module 'loop'
vm-test-run-update-hardware-configuration> target # [    7.189449] systemd[1]: modprobe@configfs.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    7.191406] systemd[1]: Finished Load Kernel Module configfs.
vm-test-run-update-hardware-configuration> target # [    7.194430] systemd[1]: Mounted FUSE Control File System.
vm-test-run-update-hardware-configuration> target # [    7.197415] systemd[1]: Finished Load Kernel Modules.
vm-test-run-update-hardware-configuration> target # [    7.405537] EXT4-fs (vdb): re-mounted dd6be2a2-69c9-44a1-95ed-12570d53438f.
vm-test-run-update-hardware-configuration> target # [    7.213612] systemd-oomd[297]: No swap; memory pressure usage will be degraded
vm-test-run-update-hardware-configuration> target # [    7.218590] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.
vm-test-run-update-hardware-configuration> target # [    7.221190] systemd[1]: Finished Remount Root and Kernel File Systems.
vm-test-run-update-hardware-configuration> target # [    7.226189] systemd[1]: Listening on Disk Image Download Service Socket.
vm-test-run-update-hardware-configuration> target # [    7.230100] systemd[1]: Mounting Kernel Configuration File System...
vm-test-run-update-hardware-configuration> target # [    7.234086] systemd[1]: Starting Firewall...
vm-test-run-update-hardware-configuration> target # [    7.248978] systemd[1]: Starting Flush Journal to Persistent Storage...
vm-test-run-update-hardware-configuration> target # [    7.250244] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore
vm-test-run-update-hardware-configuration> target # [    7.253858] systemd[1]: Starting Load/Save OS Random Seed...
vm-test-run-update-hardware-configuration> target # [    7.261406] systemd[1]: Starting Apply Kernel Variables...
vm-test-run-update-hardware-configuration> target # [    7.273702] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
vm-test-run-update-hardware-configuration> target # [    7.275122] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
vm-test-run-update-hardware-configuration> target # [    7.497965] systemd-journald[294]: Received client request to flush runtime journal.
vm-test-run-update-hardware-configuration> target # [    7.499623] systemd[1]: Finished Load/Save OS Random Seed.
vm-test-run-update-hardware-configuration> target # [    7.503488] systemd[1]: Reached target First Boot Complete.
vm-test-run-update-hardware-configuration> target # [    7.508249] systemd[1]: Mounted Kernel Configuration File System.
vm-test-run-update-hardware-configuration> target # [    7.509838] systemd[1]: Finished Apply Kernel Variables.
vm-test-run-update-hardware-configuration> target # [    7.513304] systemd[1]: Starting Network Name Resolution...
vm-test-run-update-hardware-configuration> target # [    7.515194] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
vm-test-run-update-hardware-configuration> target # [    7.518125] systemd[1]: Starting Create Static Device Nodes in /dev...
vm-test-run-update-hardware-configuration> target # [    7.520634] systemd[1]: Finished Flush Journal to Persistent Storage.
vm-test-run-update-hardware-configuration> target # [    7.544855] systemd-resolved[323]: Positive Trust Anchors:
vm-test-run-update-hardware-configuration> target # [    7.548265] systemd-resolved[323]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
vm-test-run-update-hardware-configuration> target # [    7.550837] systemd-resolved[323]: . IN DS 38696 8 2 683d2d0acb8c9b712a1948b27f741219298d0a450d612c483af444a4c0fb2b16
vm-test-run-update-hardware-configuration> target # [    7.554182] systemd-resolved[323]: Negative trust anchors: home.arpa 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 170.0.0.192.in-addr.arpa 171.0.0.192.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa ipv4only.arpa resolver.arpa corp home internal intranet lan local private test
vm-test-run-update-hardware-configuration> target # [    7.583296] systemd[1]: Finished Create Static Device Nodes in /dev.
vm-test-run-update-hardware-configuration> target # [    7.584936] systemd[1]: Reached target Preparation for Local File Systems.
vm-test-run-update-hardware-configuration> target # [    7.589294] systemd[1]: Starting Rule-based Manager for Device Events and Files...
vm-test-run-update-hardware-configuration> target # [    7.610457] systemd[1]: Finished Coldplug All udev Devices.
vm-test-run-update-hardware-configuration> target # [    7.627281] systemd-resolved[323]: Using system hostname 'target'.
vm-test-run-update-hardware-configuration> target # [    7.631239] systemd[1]: Started Network Name Resolution.
vm-test-run-update-hardware-configuration> target # [    7.645587] systemd-udevd[340]: Using default interface naming scheme 'v261'.
vm-test-run-update-hardware-configuration> target # [    7.685253] systemd[1]: Started Rule-based Manager for Device Events and Files.
vm-test-run-update-hardware-configuration> target # [    7.803752] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
vm-test-run-update-hardware-configuration> target # [    7.880437] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.
vm-test-run-update-hardware-configuration> target # [    7.932222] systemd[1]: Mounting /run/wrappers...
vm-test-run-update-hardware-configuration> target # [    7.933925] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.
vm-test-run-update-hardware-configuration> target # [    7.967545] systemd[1]: Mounted /run/wrappers.
vm-test-run-update-hardware-configuration> target # [    7.971673] systemd[1]: Reached target Local File Systems.
vm-test-run-update-hardware-configuration> target # [    7.975143] systemd[1]: Listening on Boot Loader Control Service Socket.
vm-test-run-update-hardware-configuration> target # [    7.979792] (udev-worker)[375]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    7.982215] systemd[1]: Starting register-nix-paths.service...
vm-test-run-update-hardware-configuration> target # [    7.987627] systemd[1]: Starting Create SUID/SGID Wrappers...
vm-test-run-update-hardware-configuration> target # [    7.988741] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.
vm-test-run-update-hardware-configuration> target # [    7.990431] (udev-worker)[374]: Network interface NamePolicy= disabled on kernel command line.
vm-test-run-update-hardware-configuration> target # [    7.994125] systemd[1]: Starting Save Transient machine-id to Disk...
vm-test-run-update-hardware-configuration> target # [    8.005113] systemd[1]: Starting Create System Files and Directories...
vm-test-run-update-hardware-configuration> target # [    8.132926] systemd[1]: Finished Create System Files and Directories.
vm-test-run-update-hardware-configuration> target # [    8.145301] systemd[1]: Starting Rebuild Journal Catalog...
vm-test-run-update-hardware-configuration> target # [    8.151778] systemd[1]: Starting Record System Boot/Shutdown in UTMP...
vm-test-run-update-hardware-configuration> target: waiting for TCP port 22 on localhost
vm-test-run-update-hardware-configuration> target # [    8.272443] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.
vm-test-run-update-hardware-configuration> target: waiting for the VM to finish booting
vm-test-run-update-hardware-configuration> target # [    8.282140] systemd[1]: Finished Save Transient machine-id to Disk.
vm-test-run-update-hardware-configuration> target # [    8.288163] systemd[1]: Finished Record System Boot/Shutdown in UTMP.
vm-test-run-update-hardware-configuration> target # [    8.309175] systemd[1]: Finished Rebuild Journal Catalog.
vm-test-run-update-hardware-configuration> target # [    8.316947] systemd[1]: Starting Update is Completed...
vm-test-run-update-hardware-configuration> target # [    8.390612] systemd[1]: Finished Update is Completed.
vm-test-run-update-hardware-configuration> target # [    8.620575] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
vm-test-run-update-hardware-configuration> target # [    8.698755] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console
vm-test-run-update-hardware-configuration> target # [    8.742464] ACPI: button: Power Button [PWRF]
vm-test-run-update-hardware-configuration> target # [    8.603238] systemd[1]: Finished Firewall.
vm-test-run-update-hardware-configuration> target # [    8.604694] systemd[1]: Reached target Preparation for Network.
vm-test-run-update-hardware-configuration> target # [    8.609789] systemd[1]: Listening on Network Management Resolve Hook Socket.
vm-test-run-update-hardware-configuration> target # [    8.616100] systemd[1]: Starting Network Management...
vm-test-run-update-hardware-configuration> target # [    8.653313] systemd[1]: Finished register-nix-paths.service.
vm-test-run-update-hardware-configuration> target # [    8.674917] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    8.678285] systemd[1]: Finished Create SUID/SGID Wrappers.
vm-test-run-update-hardware-configuration> target # [    8.679386] systemd[1]: Reached target System Initialization.
vm-test-run-update-hardware-configuration> target # [    8.681577] systemd[1]: Started Discard unused filesystem blocks once a week.
vm-test-run-update-hardware-configuration> target # [    8.684279] systemd[1]: Started Daily Cleanup of Temporary Directories.
vm-test-run-update-hardware-configuration> target # [    8.685587] systemd[1]: Reached target Timer Units.
vm-test-run-update-hardware-configuration> target # [    8.688877] systemd[1]: Listening on D-Bus System Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [    8.690677] systemd[1]: Listening on Nix Daemon Socket.
vm-test-run-update-hardware-configuration> target # [    8.693189] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).
vm-test-run-update-hardware-configuration> target # [    8.694673] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.
vm-test-run-update-hardware-configuration> target # [    8.696146] systemd[1]: Reached target Socket Units.
vm-test-run-update-hardware-configuration> target # [    8.697087] systemd[1]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [    8.700088] systemd[1]: Started backdoor.service.
vm-test-run-update-hardware-configuration> target # [    8.703081] systemd[1]: Starting Import lastlog data into lastlog2 database...
vm-test-run-update-hardware-configuration> target # [    8.708872] systemd[1]: Starting Name Service Cache Daemon (nsncd)...
vm-test-run-update-hardware-configuration> target # [    8.723994] systemd[1]: Starting Post-Boot Actions...
vm-test-run-update-hardware-configuration> target # [    8.729907] systemd-resolved[323]: Clock change detected. Flushing caches.
vm-test-run-update-hardware-configuration> target # [    8.765703] systemd[1]: Started Reset console on configuration changes.
vm-test-run-update-hardware-configuration> target # [    8.785537] systemd[1]: Starting SSH Host Keys Generation...
vm-test-run-update-hardware-configuration> target # [    8.834856] rtc_cmos PNP0B00:00: RTC can wake from S4
vm-test-run-update-hardware-configuration> target # [    8.822538] systemd[1]: Starting D-Bus System Message Bus...
vm-test-run-update-hardware-configuration> target # [    8.863122] systemd[1]: Finished Post-Boot Actions.
vm-test-run-update-hardware-configuration> target # [    8.922718] rtc_cmos PNP0B00:00: registered as rtc0
vm-test-run-update-hardware-configuration> target # [    8.922816] rtc_cmos PNP0B00:00: setting system clock to 2026-10-14T13:17:52 UTC (1791983872)
vm-test-run-update-hardware-configuration> target # connecting to host...
vm-test-run-update-hardware-configuration> target # [    8.922906] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
vm-test-run-update-hardware-configuration> target # [    8.924905] systemd-journald[294]: Time jumped backwards, rotating.
vm-test-run-update-hardware-configuration> target # [    8.916747] nsncd[527]: Oct 14 13:17:52.686 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"
vm-test-run-update-hardware-configuration> target # [    8.922128] systemd[1]: Started Name Service Cache Daemon (nsncd).
vm-test-run-update-hardware-configuration> target # [    8.926413] systemd[1]: Reached target Host and Network Name Lookups.
vm-test-run-update-hardware-configuration> target # [    8.927906] systemd[1]: Reached target User and Group Name Lookups.
vm-test-run-update-hardware-configuration> target: Guest shell says: b'Spawning backdoor root shell...\n'
vm-test-run-update-hardware-configuration> target: connected to guest root shell
vm-test-run-update-hardware-configuration> target: (connecting took 0.70 seconds)
vm-test-run-update-hardware-configuration> target: (finished: waiting for the VM to finish booting, in 0.70 seconds)
vm-test-run-update-hardware-configuration> target # [    8.927508] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
vm-test-run-update-hardware-configuration> target # [    8.970276] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:07.0/virtio5/input/input4
vm-test-run-update-hardware-configuration> target # [    8.984712] mousedev: PS/2 mouse device common for all mice
vm-test-run-update-hardware-configuration> target # [    8.988713] Console: switching to colour dummy device 80x25
vm-test-run-update-hardware-configuration> target # [    8.994227] systemd[1]: Starting User Login Management...
vm-test-run-update-hardware-configuration> target # [    9.007105] systemd[1]: Finished Import lastlog data into lastlog2 database.
vm-test-run-update-hardware-configuration> target # [    9.060184] dbus-broker-launch[535]: Looking up NSS user entry for 'systemd-timesync'...
vm-test-run-update-hardware-configuration> target # [    9.072680] dbus-broker-launch[535]: NSS returned no entry for 'systemd-timesync'
vm-test-run-update-hardware-configuration> target # [    9.074056] dbus-broker-launch[535]: Invalid user-name in /nix/store/jd4vq91w0sq04vqjhlg7k7qy6yl4mv8p-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"
vm-test-run-update-hardware-configuration> target # [    9.108401] systemd-networkd[515]: lo: Link UP
vm-test-run-update-hardware-configuration> target # [    9.110708] systemd-networkd[515]: lo: Gained carrier
vm-test-run-update-hardware-configuration> target # [    9.114228] systemd[1]: Started D-Bus System Message Bus.
vm-test-run-update-hardware-configuration> target # [    9.120109] systemd-networkd[515]: eth0: Configuring with /etc/systemd/network/99-ethernet-default-dhcp.network.
vm-test-run-update-hardware-configuration> target # [    9.127057] systemd[1]: Started Network Management.
vm-test-run-update-hardware-configuration> target # [    9.127963] systemd[1]: Reached target Network.
vm-test-run-update-hardware-configuration> target # [    9.137275] systemd[1]: Starting Enable Persistent Storage in systemd-networkd...
vm-test-run-update-hardware-configuration> target # [    9.139177] systemd-networkd[515]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [    9.144166] systemd-networkd[515]: eth1: Configuring with /etc/systemd/network/40-eth1.network.
vm-test-run-update-hardware-configuration> target # [    9.151079] systemd-networkd[515]: eth0: Link UP
vm-test-run-update-hardware-configuration> target # [    9.152614] systemd[1]: Starting Permit User Sessions...
vm-test-run-update-hardware-configuration> target # [    9.158977] systemd-networkd[515]: eth0: Gained carrier
vm-test-run-update-hardware-configuration> target # [    9.172616] dbus-broker-launch[535]: Ready
vm-test-run-update-hardware-configuration> target # [    9.014142] parport_pc 00:02: reported by Plug and Play ACPI
vm-test-run-update-hardware-configuration> target # [    9.014272] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
vm-test-run-update-hardware-configuration> target # [    9.194657] cfg80211: Loading compiled-in X.509 certificates for regulatory database
vm-test-run-update-hardware-configuration> target # [    9.232290] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
vm-test-run-update-hardware-configuration> target # [    9.232424] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
vm-test-run-update-hardware-configuration> target # [    9.232958] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
vm-test-run-update-hardware-configuration> target # [    9.232962] cfg80211: failed to load regulatory.db
vm-test-run-update-hardware-configuration> target # [    9.379402] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
vm-test-run-update-hardware-configuration> target # [    9.379527] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
vm-test-run-update-hardware-configuration> target # [    9.396096] NET: Registered PF_PACKET protocol family
vm-test-run-update-hardware-configuration> target # [    9.482530] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6
vm-test-run-update-hardware-configuration> target # [    9.482806] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5
vm-test-run-update-hardware-configuration> target # [    9.606617] [drm] Found bochs VGA, ID 0xb0c5.
vm-test-run-update-hardware-configuration> target # [    9.606619] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
vm-test-run-update-hardware-configuration> target # [    9.217083] systemd-networkd[515]: eth1: Link UP
vm-test-run-update-hardware-configuration> target # [    9.417478] systemd-networkd[515]: eth1: Gained carrier
vm-test-run-update-hardware-configuration> target # [    9.419226] systemd-networkd[515]: eth1: Found matching .network file, based on potentially unpredictable interface name: /etc/systemd/network/40-eth1.network
vm-test-run-update-hardware-configuration> target # [    9.424327] systemd-networkd[515]: eth0: DHCPv4 address 10.0.2.15/24, gateway 10.0.2.2 acquired from 10.0.2.2
vm-test-run-update-hardware-configuration> target # [    9.426092] systemd[1]: Finished Permit User Sessions.
vm-test-run-update-hardware-configuration> target # [    9.431063] systemd[1]: Finished Enable Persistent Storage in systemd-networkd.
vm-test-run-update-hardware-configuration> target # [    9.432514] systemd-logind[556]: New seat seat0.
vm-test-run-update-hardware-configuration> target # [    9.433503] systemd[1]: Started Getty on tty1.
vm-test-run-update-hardware-configuration> target # [    9.436150] systemd[1]: Reached target Login Prompts.
vm-test-run-update-hardware-configuration> target # [    9.437076] systemd-logind[556]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)
vm-test-run-update-hardware-configuration> target # [    9.438702] systemd[1]: Started User Login Management.
vm-test-run-update-hardware-configuration> target # [    9.461198] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
vm-test-run-update-hardware-configuration> target # [    9.466135] systemd[1]: Starting linger-users.service...
vm-test-run-update-hardware-configuration> target # [    9.472062] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    9.668414] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic
vm-test-run-update-hardware-configuration> target # [    9.669247] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0
vm-test-run-update-hardware-configuration> target # [    9.484815] systemd-logind[556]: Watching system buttons on /dev/input/event2 (Power Button)
vm-test-run-update-hardware-configuration> target # [    9.680675] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
vm-test-run-update-hardware-configuration> target # [    9.505291] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.506650] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    9.509878] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    9.704271] ppdev: user-space parallel port driver
vm-test-run-update-hardware-configuration> target # [    9.542100] sshd-keygen-start[574]: Generating public/private rsa key pair.
vm-test-run-update-hardware-configuration> target # [    9.543361] sshd-keygen-start[574]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key
vm-test-run-update-hardware-configuration> target # [    9.544882] sshd-keygen-start[574]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
vm-test-run-update-hardware-configuration> target # [    9.546864] sshd-keygen-start[574]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [    9.547843] sshd-keygen-start[574]: SHA256:PDl6m9P8W5lLabeeksELIgAfykzz+0/yH2KYWDW8/VE root@target
vm-test-run-update-hardware-configuration> target # [    9.549316] sshd-keygen-start[574]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [    9.550436] sshd-keygen-start[574]: +---[RSA 4096]----+
vm-test-run-update-hardware-configuration> target # [    9.551372] sshd-keygen-start[574]: |                 |
vm-test-run-update-hardware-configuration> target # [    9.556139] sshd-keygen-start[574]: |   + .  .        |
vm-test-run-update-hardware-configuration> target # [    9.557505] sshd-keygen-start[574]: |  + * .  +     E |
vm-test-run-update-hardware-configuration> target # [    9.558589] sshd-keygen-start[574]: |   + + ...+   .  |
vm-test-run-update-hardware-configuration> target # [    9.559984] sshd-keygen-start[574]: |      o.S. ...   |
vm-test-run-update-hardware-configuration> target # [    9.561842] sshd-keygen-start[574]: |     .ooo+ ..o.+ |
vm-test-run-update-hardware-configuration> target # [    9.563309] sshd-keygen-start[574]: |     .o+o*....@ .|
vm-test-run-update-hardware-configuration> target # [    9.564308] sshd-keygen-start[574]: |       o*o+ .B oo|
vm-test-run-update-hardware-configuration> target # [    9.565581] sshd-keygen-start[574]: |        ++.oo.++ |
vm-test-run-update-hardware-configuration> target # [    9.567177] sshd-keygen-start[574]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [    9.570875] systemd[1]: linger-users.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.575066] systemd[1]: Finished linger-users.service.
vm-test-run-update-hardware-configuration> target # [    9.780516] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
vm-test-run-update-hardware-configuration> target # [    9.601179] sshd-keygen-start[600]: Generating public/private ed25519 key pair.
vm-test-run-update-hardware-configuration> target # [    9.602428] sshd-keygen-start[600]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
vm-test-run-update-hardware-configuration> target # [    9.603943] sshd-keygen-start[600]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
vm-test-run-update-hardware-configuration> target # [    9.606332] sshd-keygen-start[600]: The key fingerprint is:
vm-test-run-update-hardware-configuration> target # [    9.607339] sshd-keygen-start[600]: SHA256:W9RA+CvwQNISd6PaniiglEw7P+urYwIKGiY+ysoie9o root@target
vm-test-run-update-hardware-configuration> target # [    9.608773] sshd-keygen-start[600]: The key's randomart image is:
vm-test-run-update-hardware-configuration> target # [    9.609859] sshd-keygen-start[600]: +--[ED25519 256]--+
vm-test-run-update-hardware-configuration> target # [    9.610771] sshd-keygen-start[600]: |    .o. ooo      |
vm-test-run-update-hardware-configuration> target # [    9.611691] sshd-keygen-start[600]: |    o.oo.. o     |
vm-test-run-update-hardware-configuration> target # [    9.612606] sshd-keygen-start[600]: | .   +.  .. .    |
vm-test-run-update-hardware-configuration> target # [    9.614590] sshd-keygen-start[600]: |o o  oo  ..      |
vm-test-run-update-hardware-configuration> target # [    9.615510] sshd-keygen-start[600]: |.*  . .+S ..     |
vm-test-run-update-hardware-configuration> target # [    9.616426] sshd-keygen-start[600]: |Boo  o .oo.      |
vm-test-run-update-hardware-configuration> target # [    9.618078] sshd-keygen-start[600]: |X..o. o ..       |
vm-test-run-update-hardware-configuration> target # [    9.618980] sshd-keygen-start[600]: |O*..o            |
vm-test-run-update-hardware-configuration> target # [    9.619890] sshd-keygen-start[600]: |%BE+.            |
vm-test-run-update-hardware-configuration> target # [    9.622087] sshd-keygen-start[600]: +----[SHA256]-----+
vm-test-run-update-hardware-configuration> target # [    9.624072] systemd[1]: sshd-keygen.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.626122] systemd[1]: Finished SSH Host Keys Generation.
vm-test-run-update-hardware-configuration> target # [    9.632477] systemd[1]: Starting SSH Daemon...
vm-test-run-update-hardware-configuration> target # [    9.648342] systemd-logind[556]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)
vm-test-run-update-hardware-configuration> target # [    9.679181] sshd[602]: Server listening on 0.0.0.0 port 22.
vm-test-run-update-hardware-configuration> target # [    9.681188] sshd[602]: Server listening on :: port 22.
vm-test-run-update-hardware-configuration> target # [    9.683575] systemd[1]: Started SSH Daemon.
vm-test-run-update-hardware-configuration> target # [    9.684651] systemd[1]: Reached target Multi-User System.
vm-test-run-update-hardware-configuration> target # [    9.901417] Console: switching to colour frame buffer device 160x50
vm-test-run-update-hardware-configuration> target # [    9.907914] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device
vm-test-run-update-hardware-configuration> target # [    9.718230] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
vm-test-run-update-hardware-configuration> target # [    9.720708] systemd[1]: Stopped Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    9.730229] systemd[1]: Starting Virtual Console Setup...
vm-test-run-update-hardware-configuration> target # [    9.985861] kvm_amd: TSC scaling supported
vm-test-run-update-hardware-configuration> target # [    9.986411] kvm_amd: Nested Virtualization enabled
vm-test-run-update-hardware-configuration> target # [    9.986967] kvm_amd: Nested Paging enabled
vm-test-run-update-hardware-configuration> target # [    9.987848] kvm_amd: LBR virtualization supported
vm-test-run-update-hardware-configuration> target # [    9.988449] kvm_amd: Virtual GIF supported
vm-test-run-update-hardware-configuration> target # [    9.988927] kvm_amd: Virtual NMI enabled
vm-test-run-update-hardware-configuration> target # [   10.013733] EDAC MC: Ver: 3.0.0
vm-test-run-update-hardware-configuration> target # [    9.901356] systemd-vconsole-setup[605]: Configuration of first virtual console was skipped, ignoring remaining ones.
vm-test-run-update-hardware-configuration> target # [    9.906906] systemd[1]: Finished Virtual Console Setup.
vm-test-run-update-hardware-configuration> target # [    9.911174] systemd[1]: Startup finished in 929ms (kernel) + 5.144s (initrd) + 3.836s (userspace) = 9.910s.
vm-test-run-update-hardware-configuration> target # Connection to localhost (::1) 22 port [tcp/ssh] succeeded!
vm-test-run-update-hardware-configuration> target: (finished: waiting for TCP port 22 on localhost, in 1.93 seconds)
vm-test-run-update-hardware-configuration> Setting up port forwarding from host port 58881 to guest port 22
vm-test-run-update-hardware-configuration> target # [   10.210477] sshd-session[613]: Connection closed by ::1 port 45648 [preauth]
vm-test-run-update-hardware-configuration> target # [   10.852957] systemd-networkd[515]: eth1: Gained IPv6LL
vm-test-run-update-hardware-configuration> target # [   10.981052] systemd-networkd[515]: eth0: Gained IPv6LL
vm-test-run-update-hardware-configuration> Host port 58881 is now listening
vm-test-run-update-hardware-configuration> target # [   12.220625] sshd-session[615]: Connection closed by 10.0.2.2 port 49960 [preauth]
vm-test-run-update-hardware-configuration> target # [   29.719374] sshd-session[623]: Accepted publickey for nonrootuser from 10.0.2.2 port 44642 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   29.726504] sshd-session[623]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   29.747245] systemd-logind[556]: New session '1' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   29.751510] systemd[1]: Created slice Slice /user/1000.
vm-test-run-update-hardware-configuration> target # [   29.755333] systemd[1]: Starting User Runtime Directory /run/user/1000...
vm-test-run-update-hardware-configuration> target # [   29.778484] systemd[1]: Finished User Runtime Directory /run/user/1000.
vm-test-run-update-hardware-configuration> target # [   29.782621] systemd[1]: Starting User Manager for UID 1000...
vm-test-run-update-hardware-configuration> target # [   29.799753] (systemd)[629]: pam_unix(systemd-user:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   29.804505] systemd-logind[556]: New session '2' of user 'nonrootuser' with class 'manager' and type 'unspecified'.
vm-test-run-update-hardware-configuration> target # [   29.820936] systemd[629]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   29.927971] systemd[629]: Queued start job for default target Main User Target.
vm-test-run-update-hardware-configuration> target # [   29.930987] systemd[629]: Failed to adjust io pressure threshold, ignoring: Device or resource busy
vm-test-run-update-hardware-configuration> target # [   29.934197] systemd[629]: Created slice User Application Slice.
vm-test-run-update-hardware-configuration> target # [   29.935509] systemd[629]: Started Daily Cleanup of User's Temporary Directories.
vm-test-run-update-hardware-configuration> target # [   29.937205] systemd[629]: Reached target Paths.
vm-test-run-update-hardware-configuration> target # [   29.939291] systemd[629]: Reached target Timers.
vm-test-run-update-hardware-configuration> target # [   29.940854] systemd[629]: Starting D-Bus User Message Bus Socket...
vm-test-run-update-hardware-configuration> target # [   29.944322] systemd[629]: Starting Create User Files and Directories...
vm-test-run-update-hardware-configuration> target # [   29.967807] systemd[629]: Finished Create User Files and Directories.
vm-test-run-update-hardware-configuration> target # [   29.979726] systemd[629]: Listening on D-Bus User Message Bus Socket.
vm-test-run-update-hardware-configuration> target # [   29.980936] systemd[629]: Reached target Sockets.
vm-test-run-update-hardware-configuration> target # [   29.981834] systemd[629]: Reached target Basic System.
vm-test-run-update-hardware-configuration> target # [   29.982772] systemd[1]: Started User Manager for UID 1000.
vm-test-run-update-hardware-configuration> target # [   29.986712] systemd[629]: Starting Run user-specific NixOS activation...
vm-test-run-update-hardware-configuration> target # [   29.989480] systemd[1]: Started Session 1 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   30.015748] systemd[629]: Finished Run user-specific NixOS activation.
vm-test-run-update-hardware-configuration> target # [   30.016965] systemd[629]: Reached target Main User Target.
vm-test-run-update-hardware-configuration> target # [   30.019130] systemd[629]: Startup finished in 203ms.
vm-test-run-update-hardware-configuration> target # [   30.061804] sudo[650]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-facter
vm-test-run-update-hardware-configuration> target # [   30.068671] sudo[650]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   30.347117] sr 2:0:0:0: Attached scsi generic sg0 type 5
vm-test-run-update-hardware-configuration> target # [   30.273368] sudo[650]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   30.282605] sshd-session[641]: Received disconnect from 10.0.2.2 port 44642:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   30.284566] sshd-session[641]: Disconnected from user nonrootuser 10.0.2.2 port 44642
vm-test-run-update-hardware-configuration> target # [   30.286555] sshd-session[623]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   30.292225] systemd-logind[556]: Session 1 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> target # [   48.059334] sshd-session[681]: Accepted publickey for nonrootuser from 10.0.2.2 port 37572 ssh2: ED25519 SHA256:szHo+Hv7lib86u8xTskZRKEroXEhSbwPe4V7YQr33Xk
vm-test-run-update-hardware-configuration> target # [   48.066856] sshd-session[681]: pam_unix(sshd:session): session opened for user nonrootuser(uid=1000) by (uid=0)
vm-test-run-update-hardware-configuration> target # [   48.073326] systemd-logind[556]: New session '3' of user 'nonrootuser' with class 'user' and type 'tty'.
vm-test-run-update-hardware-configuration> target # [   48.076525] systemd[1]: Started Session 3 of User nonrootuser.
vm-test-run-update-hardware-configuration> target # [   48.125977] sudo[691]: nonrootuser : PWD=/home/nonrootuser ; USER=root ; COMMAND=/run/current-system/sw/bin/bash -c 'exec "$@"' -- nixos-generate-config --no-filesystems --show-hardware-config
vm-test-run-update-hardware-configuration> target # [   48.133043] sudo[691]: pam_unix(sudo:session): session opened for user root(uid=0) by nonrootuser(uid=1000)
vm-test-run-update-hardware-configuration> target # [   48.271867] sudo[691]: pam_unix(sudo:session): session closed for user root
vm-test-run-update-hardware-configuration> target # [   48.281191] sshd-session[684]: Received disconnect from 10.0.2.2 port 37572:11: disconnected by user
vm-test-run-update-hardware-configuration> target # [   48.282678] sshd-session[684]: Disconnected from user nonrootuser 10.0.2.2 port 37572
vm-test-run-update-hardware-configuration> target # [   48.284236] sshd-session[681]: pam_unix(sshd:session): session closed for user nonrootuser
vm-test-run-update-hardware-configuration> target # [   48.288393] systemd-logind[556]: Session 3 logged out. Waiting for processes to exit.
vm-test-run-update-hardware-configuration> (finished: run the VM test script, in 49.85 seconds)
vm-test-run-update-hardware-configuration> test script finished in 49.94s
vm-test-run-update-hardware-configuration> cleanup
vm-test-run-update-hardware-configuration> kill QemuMachine (pid 45)
vm-test-run-update-hardware-configuration> target # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/lb41b0anx1f98y9y5s9mdv97gjgsq740-python3-3.14.7/bin/python3.14)
vm-test-run-update-hardware-configuration> target # [2026-10-14T13:18:33Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-10-14T13:18:33Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> target # [2026-10-14T13:18:33Z INFO  virtiofsd] Client disconnected, shutting down
vm-test-run-update-hardware-configuration> (finished: cleanup, in 0.12 seconds)